Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 18-08-2021 | Date | Date | 26-08-2021 |
| Sl. No. | Item Description |
| 1 | REQUIREMENT OF EQUIPMENT FOR FIELD LABORATORY UNDER 6 NOS. OF QUALITY CONTROLDIVISIONS AND RCTRC |
| 2 | RCTRC FIELD LABORATORY ( TO BE HANDED OVER TO THE DIRCETOR,RCTRC, BHUBANESWAR/ HIS AUTHORISED PERSON) |
| 3 | Soil |
| 4 | Digging tools like pick axe, shovel, hammer, chisel, etc. |
| 5 | IS Sieves with lid and pan (90mm, 80mm, 75mm, 63mm, 53mm, 45mm, 37.5mm, 26.5mm, 19mm, 13.2mm, 11.2mm, 9.5mm, 4.75mm, 2.8mm, 5.6mm, 3.35mm, 2.36mm, 1mm, 600 micron, 425 micron, 300 micron, 150 micron, 180 micron, 90 micron and 75 micron) |
| 6 | Sand Pouring Cylinder with tray complete for field density |
| 7 | Core Cutter (100mm dia) 100mm/ 150mm height complete with dolly and hammer |
| 8 | Speedy moisture meter complete with chemicals |
| 9 | Electronic / Digital balance 5 kg |
| 10 | Aggregate |
| 11 | Electronic / Digital balance 20kg |
| 12 | Enamelled Tray |
| 13 | Concrete |
| 14 | Slump Cone |
| 15 | Cube Mould (150mm * 150mm) |
| 16 | Petrol Driven Core Cutter Machine for Concrete and Bitumen |
| 17 | Cutting Machine for concete core |
| 18 | Grinder Machine for concrete core |
| 19 | Capping set for 100mm dia concrete core |
| 20 | Capping set for 150mm dia concrete core |
| 21 | Bitumen |
| 22 | Digital Thermometers |
| 23 | Bitumen Extraction Apparatus |
| 24 | Trays for measurement of tack coat Quantity |
| 25 | Miscellanious |
| 26 | Straight Edges |
| 27 | Measuring Tape (30m & 5m), Spatula, Spirit Level, Thread, Plumb bob, Knife 250 mm long, Steel Scale, Tarpoeline, Calculator etc. |
| 28 | ANGUL FIELD LABORATORY ( TO BE HANDED OVER TO THE E.E ANGUL QUALITY CONTROL DIVISION/ HIS AUTHORISED PERSON) |
| 29 | Soil |
| 30 | Digging tools like pick axe, shovel, hammer, chisel, etc. |
| 31 | IS Sieves with lid and pan (90mm, 80mm, 75mm, 63mm, 53mm, 45mm, 37.5mm, 26.5mm, 19mm, 13.2mm, 11.2mm, 9.5mm, 4.75mm, 2.8mm, 5.6mm, 3.35mm, 2.36mm, 1mm, 600 micron, 425 micron, 300 micron, 150 micron, 180 micron, 90 micron and 75 micron) |
| 32 | Sand Pouring Cylinder with tray complete for field density |
| 33 | Core Cutter (100mm dia) 100mm/ 150mm height complete with dolly and hammer |
| 34 | Speedy moisture meter complete with chemicals |
| 35 | Electronic / Digital balance 5 kg |
| 36 | Aggregate |
| 37 | Electronic / Digital balance 20kg |
| 38 | Enamelled Tray |
| 39 | Concrete |
| 40 | Slump Cone |
| 41 | Cube Mould (150mm * 150mm) |
| 42 | Petrol Driven Core Cutter Machine for Concrete and Bitumen |
| 43 | Cutting Machine for concete core |
| 44 | Grinder Machine for concrete core |
| 45 | Capping set for 100mm dia concrete core |
| 46 | Capping set for 150mm dia concrete core |
| 47 | Bitumen |
| 48 | Digital Thermometers |
| 49 | Bitumen Extraction Apparatus |
| 50 | Trays for measurement of tack coat Quantity |
| 51 | Miscellanious |
| 52 | Straight Edges |
| 53 | Measuring Tape (30m & 5m), Spatula, Spirit Level, Thread, Plumb bob, Knife 250 mm long, Steel Scale, Tarpoeline, Calculator etc. |
| 54 | CUTTACK FIELD LABORATORY ( TO BE HANDED OVER TO THE E.E CUTTACK QUALITY CONTROL DIVISION/ HIS AUTHORISED PERSON) |
| 55 | Soil |
| 56 | Digging tools like pick axe, shovel, hammer, chisel, etc. |
| 57 | IS Sieves with lid and pan (90mm, 80mm, 75mm, 63mm, 53mm, 45mm, 37.5mm, 26.5mm, 19mm, 13.2mm, 11.2mm, 9.5mm, 4.75mm, 2.8mm, 5.6mm, 3.35mm, 2.36mm, 1mm, 600 micron, 425 micron, 300 micron, 150 micron, 180 micron, 90 micron and 75 micron) |
| 58 | Sand Pouring Cylinder with tray complete for field density |
| 59 | Core Cutter (100mm dia) 100mm/ 150mm height complete with dolly and hammer |
| 60 | Speedy moisture meter complete with chemicals |
| 61 | Electronic / Digital balance 5 kg |
| 62 | Aggregate |
| 63 | Electronic / Digital balance 20kg |
| 64 | Enamelled Tray |
| 65 | Concrete |
| 66 | Slump Cone |
| 67 | Cube Mould (150mm * 150mm) |
| 68 | Petrol Driven Core Cutter Machine for Concrete and Bitumen |
| 69 | Cutting Machine for concete core |
| 70 | Grinder Machine for concrete core |
| 71 | Capping set for 100mm dia concrete core |
| 72 | Capping set for 150mm dia concrete core |
| 73 | Bitumen |
| 74 | Digital Thermometers |
| 75 | Bitumen Extraction Apparatus |
| 76 | Trays for measurement of tack coat Quantity |
| 77 | Miscellanious |
| 78 | Straight Edges |
| 79 | Measuring Tape (30m & 5m), Spatula, Spirit Level, Thread, Plumb bob, Knife 250 mm long, Steel Scale, Tarpoeline, Calculator etc. |
| 80 | BALASORE FIELD LABORATORY ( TO BE HANDED OVER TO THE E.E BALASORE QUALITY CONTROL DIVISION/ HIS AUTHORISED PERSON) |
| 81 | Soil |
| 82 | Digging tools like pick axe, shovel, hammer, chisel, etc. |
| 83 | IS Sieves with lid and pan (90mm, 80mm, 75mm, 63mm, 53mm, 45mm, 37.5mm, 26.5mm, 19mm, 13.2mm, 11.2mm, 9.5mm, 4.75mm, 2.8mm, 5.6mm, 3.35mm, 2.36mm, 1mm, 600 micron, 425 micron, 300 micron, 150 micron, 180 micron, 90 micron and 75 micron) |
| 84 | Sand Pouring Cylinder with tray complete for field density |
| 85 | Core Cutter (100mm dia) 100mm/ 150mm height complete with dolly and hammer |
| 86 | Speedy moisture meter complete with chemicals |
| 87 | Electronic / Digital balance 5 kg |
| 88 | Aggregate |
| 89 | Electronic / Digital balance 20kg |
| 90 | Enamelled Tray |
| 91 | Concrete |
| 92 | Slump Cone |
| 93 | Cube Mould (150mm * 150mm) |
| 94 | Petrol Driven Core Cutter Machine for Concrete and Bitumen |
| 95 | Cutting Machine for concete core |
| 96 | Grinder Machine for concrete core |
| 97 | Capping set for 100mm dia concrete core |
| 98 | Capping set for 150mm dia concrete core |
| 99 | Bitumen |
| 100 | Digital Thermometers |
| 101 | Bitumen Extraction Apparatus |
| 102 | Trays for measurement of tack coat Quantity |
| 103 | Miscellanious |
| 104 | Straight Edges |
| 105 | Measuring Tape (30m & 5m), Spatula, Spirit Level, Thread, Plumb bob, Knife 250 mm long, Steel Scale, Tarpoeline, Calculator etc. |
| 106 | SAMBALPUR FIELD LABORATORY ( TO BE HANDED OVER TO THE E.E SAMBALPUR QUALITY CONTROL DIVISION/ HIS AUTHORISED PERSON) |
| 107 | Soil |
| 108 | Digging tools like pick axe, shovel, hammer, chisel, etc. |
| 109 | IS Sieves with lid and pan (90mm, 80mm, 75mm, 63mm, 53mm, 45mm, 37.5mm, 26.5mm, 19mm, 13.2mm, 11.2mm, 9.5mm, 4.75mm, 2.8mm, 5.6mm, 3.35mm, 2.36mm, 1mm, 600 micron, 425 micron, 300 micron, 150 micron, 180 micron, 90 micron and 75 micron) |
| 110 | Sand Pouring Cylinder with tray complete for field density |
| 111 | Core Cutter (100mm dia) 100mm/ 150mm height complete with dolly and hammer |
| 112 | Speedy moisture meter complete with chemicals |
| 113 | Electronic / Digital balance 5 kg |
| 114 | Aggregate |
| 115 | Electronic / Digital balance 20kg |
| 116 | Enamelled Tray |
| 117 | Concrete |
| 118 | Slump Cone |
| 119 | Cube Mould (150mm * 150mm) |
| 120 | Petrol Driven Core Cutter Machine for Concrete and Bitumen |
| 121 | Cutting Machine for concete core |
| 122 | Grinder Machine for concrete core |
| 123 | Capping set for 100mm dia concrete core |
| 124 | Capping set for 150mm dia concrete core |
| 125 | Bitumen |
| 126 | Digital Thermometers |
| 127 | Bitumen Extraction Apparatus |
| 128 | Trays for measurement of tack coat Quantity |
| 129 | Miscellanious |
| 130 | Straight Edges |
| 131 | Measuring Tape (30m & 5m), Spatula, Spirit Level, Thread, Plumb bob, Knife 250 mm long, Steel Scale, Tarpoeline, Calculator etc. |
| 132 | BERHAMPUR FIELD LABORATORY ( TO BE HANDED OVER TO THE E.E BERHAMPUR QUALITY CONTROL DIVISION/ HIS AUTHORISED PERSON) |
| 133 | Soil |
| 134 | Digging tools like pick axe, shovel, hammer, chisel, etc. |
| 135 | IS Sieves with lid and pan (90mm, 80mm, 75mm, 63mm, 53mm, 45mm, 37.5mm, 26.5mm, 19mm, 13.2mm, 11.2mm, 9.5mm, 4.75mm, 2.8mm, 5.6mm, 3.35mm, 2.36mm, 1mm, 600 micron, 425 micron, 300 micron, 150 micron, 180 micron, 90 micron and 75 micron) |
| 136 | Sand Pouring Cylinder with tray complete for field density |
| 137 | Core Cutter (100mm dia) 100mm/ 150mm height complete with dolly and hammer |
| 138 | Speedy moisture meter complete with chemicals |
| 139 | Electronic / Digital balance 5 kg |
| 140 | Aggregate |
| 141 | Electronic / Digital balance 20kg |
| 142 | Enamelled Tray |
| 143 | Concrete |
| 144 | Slump Cone |
| 145 | Cube Mould (150mm * 150mm) |
| 146 | Petrol Driven Core Cutter Machine for Concrete and Bitumen |
| 147 | Cutting Machine for concete core |
| 148 | Grinder Machine for concrete core |
| 149 | Capping set for 100mm dia concrete core |
| 150 | Capping set for 150mm dia concrete core |
| 151 | Bitumen |
| 152 | Digital Thermometers |
| 153 | Bitumen Extraction Apparatus |
| 154 | Trays for measurement of tack coat Quantity |
| 155 | Miscellanious |
| 156 | Straight Edges |
| 157 | Measuring Tape (30m & 5m), Spatula, Spirit Level, Thread, Plumb bob, Knife 250 mm long, Steel Scale, Tarpoeline, Calculator etc. |
| 158 | BOLANGIR FIELD LABORATORY ( TO BE HANDED OVER TO THE E.E BOLANGIR QUALITY CONTROL DIVISION/ HIS AUTHORISED PERSON) |
| 159 | Soil |
| 160 | Digging tools like pick axe, shovel, hammer, chisel, etc. |
| 161 | IS Sieves with lid and pan (90mm, 80mm, 75mm, 63mm, 53mm, 45mm, 37.5mm, 26.5mm, 19mm, 13.2mm, 11.2mm, 9.5mm, 4.75mm, 2.8mm, 5.6mm, 3.35mm, 2.36mm, 1mm, 600 micron, 425 micron, 300 micron, 150 micron, 180 micron, 90 micron and 75 micron) |
| 162 | Sand Pouring Cylinder with tray complete for field density |
| 163 | Core Cutter (100mm dia) 100mm/ 150mm height complete with dolly and hammer |
| 164 | Speedy moisture meter complete with chemicals |
| 165 | Electronic / Digital balance 5 kg |
| 166 | Aggregate |
| 167 | Electronic / Digital balance 20kg |
| 168 | Enamelled Tray |
| 169 | Concrete |
| 170 | Slump Cone |
| 171 | Cube Mould (150mm * 150mm) |
| 172 | Petrol Driven Core Cutter Machine for Concrete and Bitumen |
| 173 | Cutting Machine for concete core |
| 174 | Grinder Machine for concrete core |
| 175 | Capping set for 100mm dia concrete core |
| 176 | Capping set for 150mm dia concrete core |
| 177 | Bitumen |
| 178 | Digital Thermometers |
| 179 | Bitumen Extraction Apparatus |
| 180 | Trays for measurement of tack coat Quantity |
| 181 | Miscellanious |
| 182 | Straight Edges |
| 183 | Measuring Tape (30m & 5m), Spatula, Spirit Level, Thread, Plumb bob, Knife 250 mm long, Steel Scale, Tarpoeline, Calculator etc. |
| 184 | Required Equipment of RCTRC Lab ,Bhubaneswar (To be handed over to the Director RCTRC, Bhubaneswar/ HIS AUTHORISED PERSON) |
| 185 | Soil |
| 186 | 50KN proving ring Dial gauge(0.002-5mm) |
| 187 | 2KN proving ring Dial gauge(0.002-5mm) |
| 188 | Digital UTM (Universal testing Machine) 1000KN Capasity |
| 189 | Digital Triaxial testing Apparatus (Electronics with LVDT) |
| 190 | Automatic soil Compaction apparatus |
| 191 | Consolidation Apparatus for soil (electronics) |
| 192 | 10 kg capacity weighing balance (least count-1gms) |
| 193 | 5 kg capacity weighing balance (least count-0.5gms) |
| 194 | Tripod stand for cbr mould |
| 195 | Dial Gauge(Q-25mm)(for swelling) |
| 196 | Aggregate |
| 197 | 100 kg capacity weighing balance (least count-10 gms) |
| 198 | Pycnometer Bottle 1 Itr Capacity |
| 199 | Density stand apparatus (for Wire Basket density test metthod) |
| 200 | Cement / Concrete |
| 201 | Humudity Chamber (for cement test) |
| 202 | Curing tank temperture controler (Heating & Cooling) |
| 203 | Mini Concrete mixture (for lab) |
| 204 | UPV (Ultrasonic Pulse Velocity) for NDT TEST |
| 205 | Anvil apparatus for Calibration of Rebound hammer |
| 206 | Mortar cube mould (7.06cm x7.06cmx 7.06cm) |
| 207 | Accelerated Curing Tank (12 nos cube Capasity) |
| 208 | Techometer (For Chek RPM) |
| 209 | Stop Watch (digital) |
| 210 | Burret stand 50 ml |
| 211 | Digital Hygrometer (For check RoomTemprature & Humidity) |
| 212 | Digital Vernier Calliper (0- 300mm long)(for measure dimension) |
| 213 | Standard weight box |
| 214 | PRPOPOSED LABORATORY EQUIPMENT REQUIRED FOR QUALITY CONTROL DIVISION AT ANGUL (TO BE HANDED OVER TO THE E.E QUALITY CONTROL DIVISION ANGUL/ HIS AUTHORISED PERSON) |
| 215 | Testing of Soil / GSB / Sand |
| 216 | Grain Size Analysis |
| 217 | Equipment for Grain Size Analysis |
| 218 | i) Sieves of brass frame 20CM dia. with sizes 10mm, 5.6mm, 4.75, 4, 3.35, 2.8 ,2.36, 2 ,1 .7, 1.6, 1.4, 1.18, 1.0, 0.85, 0.71, 0.6.0.5, 0.425, 0.355, 0.3, 0.25, 0.212, 0.18, 0.16 ,0.15, 0.125, 0.106, 0.09, 0.08, 0.075, 0.63, 0.53, 0.45,0.38 |
| 219 | ii) Pan & Cover for 20CM dia. sieves |
| 220 | iii) Motorised Sieve shaker with Built-in Digital Timer Power: 250/300W (250 W at 220V, 60Hz) and Dimension (approx): 548X787X850mm Detailed Specification as per IS: 2720 Part- |
| 221 | Determination of Water Content |
| 222 | Equipment for Water Content Determination |
| 223 | Equipment for determination for water content comprises containers, balance, oven and desiccator (already included as part of other equipment elsewhere) Detailed specification as per IS: 2720 Part- |
| 224 | Determination of swelling index |
| 225 | i) Swell pressure Test Apparatus |
| 226 | Load frame of Capacity 5kN. (hand operated), mould 100mm dia. X 127.3 mm height with base plate & collar, proving Ring of Capacity 2.5kN, Dial Gauge 25mm travel with 0.01 mm least count, perforated swell plate of 100mm dia. X 16mm thick, Spacer 100mm dia.X12.7mm thick, pair of porous stones of 100mm dia. X 12.7mm thick, load transfer ball-steel ball and soaking tank of 250mm dia. X 210mm high detailed Specification as per IS: 2720 Part-XLI |
| 227 | ii) Free swell index |
| 228 | 425 micron IS sieve and 2 glass graduated cylinders of 100ml capacity. Detailed specifications as per IS: 2720 Part-XL |
| 229 | Laboratory determination of CBR |
| 230 | Laboratory CBR Test Aparatus |
| 231 | i) Load frame of 50kN capacity |
| 232 | ii) Mild Steel, Zinc plated Mould, 150mm ID X 175mm |
| 233 | iii) Mild Steel, Zinc plated perforated Base. Plate |
| 234 | iv) Mid Steel Zinc plated Extension Collar 150mm ID X 50mm high |
| 235 | v) Space Disc of 148mm dia. And 47.7 mm thickness |
| 236 | vi) Metal weight 2.5 Kg, 147mm dia. With 53.3mm dia. Central hole |
| 237 | vii) Perforated Plate, 148mm dia. With adjustable stem and lock nut |
| 238 | Determination of optimum Moisture Content (OMC) by Light Compaction Test |
| 239 | Light Compaction Proctor Test apparatus |
| 240 | i) Compaction mould made of mild steel having 100mm dia. X 127.3 mm height and 1000ml volume |
| 241 | ii) Rammer 2.6 Kg X 310 mm Fall |
| 242 | Determination of Optimum Moisture Content (OMC) by Heavy Compaction |
| 243 | Heavy Compaction Proctor Test Apparatus |
| 244 | i) Compaction mould made of mild steel having 150mm dia. 127.3mm height 2305 ml volume |
| 245 | ii) Rammer 4.9Kg X 450mm fall |
| 246 | Determination of Liquid Limit |
| 247 | Liquid Limit Device Set |
| 248 | i) Casgrande Liquid Limit device hand operated, grooving tool, Gauge Block and Moisture Containers. |
| 249 | ii) Casgrande Liquid Limit Device motorised suitable for operation of 220V, 50Hz, single phase AC supply, with casgrande grooving tools |
| 250 | Determination of Liquid Limit by cone penetration method |
| 251 | Soil Cone, Penetrometer, Digital Type |
| 252 | Comprises stainless steel penetration cone 35mm long with smooth polished surface with an angel of 300C and penetration test cup of 55mm dia. X 40mm deep and it is suitable from operation on 220V, 50Hz, single phase AC supply |
| 253 | Determination of Plastic Limit |
| 254 | Equipment for Plastic Limit determination |
| 255 | Ground Glass plate 20X15 CM, Rod, 3mm dia. And 10cm long, spatuala, 100mm blade with wooden handle, moisture tin size 90mm X 20mm deep and porcelain Dish 50ml Capacity |
| 256 | Determination of Shrinkage Limit |
| 257 | Shrinkage Limit Set |
| 258 | i) Porcelain Evaporating Dish of 50ml capacity, Shrinkage Dish of 45mm dia. And 15mm height, Glass cup 50 to 60mm ID and 25mm H, Perspex Plate with three metal prongs of 75 mm X 75mm, Graduated jar of 25 m! sensitive 0.5ml, Mercury 750g and general items like spatula and straight edge. |
| 259 | Determination of PH Value |
| 260 | PH Metre |
| 261 | Should be able to indicate PH from 1 to 14 |
| 262 | Determination of specific gravity |
| 263 | Equipment for specific gravity determination |
| 264 | i)Pycnometer, 50ml Capacity |
| 265 | ii) Vacuum desiccators, size 200mm to 250mm in dia. |
| 266 | Determination of shear strength |
| 267 | Direct shear test apparatus |
| 268 | Shear box, Assembly comprise two halves, plane gripper plate, perforated gripper plate, porous stone, loading pad, base plate, Loading frame with direct and through lever systems for applying normal load up to 3kg/sq.cm. capacity, proving ring of 2kNcapacity and dial gauge of 25mm travel with 0.01mm least count and Specimen cutter |
| 269 | Weighing Balance (5 Kg Capacity LC-0.5gms) |
| 270 | Determination of Unconfined Compressive Strength (UCS) of Soil |
| 271 | UCS test Apparatus |
| 272 | Digital Compression Testing Machine of 1000kg capacity of standard rate of loading |
| 273 | Standard Penetration Test |
| 274 | Standard Penetration Test Set |
| 275 | Standard penetration test set consisting of split spoon sampler, drive weight, guide pipe assembly, tripod with rope 19mm dia. X 10mt length |
| 276 | Testing on Aggregates |
| 277 | Determination of Specific gravity and water absorption |
| 278 | Equipment for Specific gravity Determination |
| 279 | Wire basket having 20cm dia. X 20cm high with not more than 6.3mm mesh, container 20cm dia. X20 high, Shallow tray 650X500X50mm |
| 280 | Sieve Analysis of aggregate |
| 281 | Equipment for Sieve Analysis of aggregate |
| 282 | i) Sieve G.I. Frame 45cm dia. With sieve sizes of 25mm,106,100,90,80,75,63,53,50,45,40,37.5, 31.5,26.5,25,22.4,20,19,16,14,13.2,12.5,11 .2, 10,9,5,8.6,8,6.7,6.3,6,5.0,4.75 |
| 283 | ii) Sieve G.I. Frame 45cm dia. With sieve sizes of 80,75,63,53,50,45,40,37.5,31.5,26.5,25,22. 4,20,19,16,14,13.2,12.5,11.2,10,9.5,8.6,8,6 .7,6.3,6, 5.0,4.75 |
| 284 | iii) Pan and cover for 60mm dia. Sieves |
| 285 | iv) Adopter for both sieves |
| 286 | v) Sieve shaker, Motorized, with Built-in Digital Timer having power: 250/300 W (250W at 220V, 60Hz) and dimensions (approx.): 548X787X850mm |
| 287 | Determination of aggregate crushing value |
| 288 | Aggregate Crushing value Test Apparatus |
| 289 | i) 15cm dia. Cylinder with plunger and base plateii) Cylindrical measure, 115mm ID X 180mm Hiii) Tamping Rod, Steel, 16mm dia, |
| 290 | Flakiness and Elongation Test of Aggregate |
| 291 | i) Length Gauge |
| 292 | i) Constructed from steel mounted on a hardwood base with I SI certification mark |
| 293 | ii) Thickness Gauge |
| 294 | ii) Constructed from heavy gauge sheet steel with I SI certification mark. |
| 295 | Determination of Soundness of Aggregate |
| 296 | Equipment for Aggregate Soundness determination |
| 297 | Sieves of standard size and small Containers Rest included in Genera! Equipment |
| 298 | Weighing Balance (20 Kg Capacity LC-2gms) |
| 299 | Weighing Balance (100 Kg Capacity LC-10gms) |
| 300 | Testing of Cement / Concrete |
| 301 | Determination of fineness of Cement by Blain\"s air permeability method |
| 302 | Air permeability Apparatus (Blaine Type) |
| 303 | It consists of a stainless steel cell, perforated disc and plunger. A U-tube glass manometer is fit to the steel stand |
| 304 | Determine the consistency of Cement |
| 305 | Equipment for consistency of Cement determination |
| 306 | Vicat mould split type with clamping ring, Glass base plate, initial and final needle, consistency plunger, mild steel base plate and vicat mould split type with clamping |
| 307 | Determination of Heat of Hydration test |
| 308 | Heat of hydration Apparatus |
| 309 | Calorie Metre with Containers, Spatula |
| 310 | Soundness test of Cement |
| 311 | Soundness test Apparatus |
| 312 | i)Le-Chateiier mould, with ISI Certification Mark IS:5514 (2 Nos.)ii) Water Bath to maintain 270c (Included in the others) (1 No.)iii) Balances up to 1000g. (1 No.) |
| 313 | Workability of concrete by slump cone test |
| 314 | Slump Cone Test Apparatus |
| 315 | The Mould having 20mm bottom dia. 10mm top dia. and 30mm height, rod and base plate |
| 316 | Workability of Concrete by compaction factor test |
| 317 | Compaction factor Test Apparatus |
| 318 | Compaction factor apparatus like Tamping rod of 16mm diameter and 60cm long Hoper |
| 319 | Determine the Compressive strength of cement |
| 320 | Equipment for Compressive Strength of Cement determination |
| 321 | i)Vibration machine specified speed of 12000 +_200 rpm |
| 322 | ii) Vicat Apparatus with ISI Certification Mark, IS: 5513 |
| 323 | iii) Balances up to 1000g, Gauging trowel conforming to IS: 10086 |
| 324 | iv) 2000k N Compression Testing Machine, Electrically operated with three load gauges 2000kN,1000kN,500kN |
| 325 | Schmidt\"s Rebound hammer test |
| 326 | Rebound Hammer |
| 327 | Capable of measuring elastic properties of hardened concrete. Should be able to applying impact energy up to 2,027Nm. |
| 328 | Determination of Initial and Final setting time |
| 329 | Equipment for initial and final setting time determination |
| 330 | Vicat mould split type with clamping ring, Stop watch graduated 0-60 seconds X 0.2 seconds |
| 331 | Concrete compression and Flexural Strength test |
| 332 | Equipment for compression and Flexural strength determination |
| 333 | i)Compression Testing Machine 100kN \" Electrically operated including Flexural Strength Testing Facility for normal and Accelerated curing |
| 334 | ii) Mould, Cast Iron for 150mm Cube with IS! Certification Mark |
| 335 | iii) Mould, Cast Iron for 100mm Cube with ISI Certification Mark |
| 336 | iv) Mould, Cast Iron for 100mm Beam with ISI Certification Mark |
| 337 | Humidity Chamber for Cement Test |
| 338 | Curing tank temprature controller (Heating & Cooling) |
| 339 | Mini concrete Mixture for Lab. |
| 340 | UPV (Ultra Sonic Pulse Velocity) for NDT Test |
| 341 | Anvil Apparatus for calibaration of Rebound Hammer |
| 342 | Acclerated Curing Tank |
| 343 | Testing on Bitumen |
| 344 | Sampling of Bitumen |
| 345 | Equipment for Bitumen Sampling |
| 346 | Bitumen sampler and sampling Tube Metal 1 Litre Capacity |
| 347 | Determination of Penetration value |
| 348 | Bitumen penetration kit |
| 349 | i) Cast Iron Base with levelling screws, digital penetration measurement gauge 0.01mm precision, release button, automatic zeroing |
| 350 | ii) Bitumen penetration kit like cylindrical glasses having 70mm diameter 40mm internal depth for the penetration 225 to 350 |
| 351 | Determination of softening point |
| 352 | Ring and Ball Apparatus |
| 353 | Two steel balls, two brass ring depth 6.4±0.1 mm inside dia. @ bottom 15.9+0.1 mm inside dia. @ top 17.5±0.1mm outside diameter 20,6±0.1mm and thermometer |
| 354 | Determination of Viscosity of Bitumen |
| 355 | Say bolt Viscometer |
| 356 | Two tubes include bath, Furol and Universal orifice, key, control box, stirring device, cooling coil, 60ml flask and digital thermo regulator |
| 357 | Determination Ductility of Bitumen |
| 358 | Ductility Testing Machine |
| 359 | Ductility Testing Machine with Digital temp Indicator and rate of travel 5cm/min and 1cm/min |
| 360 | Determination of Flash Point and Fire Point |
| 361 | Flash Point (open)and Fire Point Test Apparatus |
| 362 | Hot Plate, 160mm dia. |
| 363 | Determination of Specific Gravity of Bitumen |
| 364 | Specific Gravity test Apparatus |
| 365 | Specific Gravity Bottle 50ml capacity normal type with narrow mouth with 6mm diameter for Bitumen |
| 366 | Water Content of Bitumen |
| 367 | Water Content Test Apparatus |
| 368 | 500ml Flask Condenser made of heat resistant glass, shapes and dimensions as per code. Receiver made of heat resistant glass, shapes and dimensions as per code |
| 369 | Binder Extractor |
| 370 | Centrifuge Extractor |
| 371 | Capacity 1.5kg - Electrically operated, speed 0 rpm to 3600rpm. |
| 372 | Determine the Stripping Value |
| 373 | Stripping Value Test Apparatus |
| 374 | Beakers, 100ml Capacity |
| 375 | Measuring the Temperature |
| 376 | Digital Thermometer |
| 377 | Digital Thermometer - range 500c-2800C |
| 378 | Determine the Marshal Stability |
| 379 | Marshal Stability Apparatus |
| 380 | Marshal Stability Apparatus |
| 381 | Testing on Steel |
| 382 | Universal Testing Machine |
| 383 | PROPOSED LABORATORY EQUIPMENTS REQUIRED FORQUALITY CONTROL DIVISION CUTTACK (TO BE HANDED OVER TO THE E.E QUALITY CONTROL DIVISION CUTTACK/ HIS AUTHORISED PERSON) |
| 384 | Grain Size Analysis |
| 385 | Equipment for Grain Size Analysis |
| 386 | i)Sieves of brass frame 20CM dia. with sizes10mm,5.6mm,4.75,4,3.35,2.8,2.36,2.1.7,1.6,1.4,1.18,1.0,0.85,0.71,0.6,0.5,0.425,0.355,0.3,0.25,0.212,0.18,0.16,0.15,0.125,0.106,0.09,0.08,0.075,0.63,0.53,0.45,0.38 |
| 387 | ii)Pan & Cover for 20CM dia. sieves |
| 388 | iii) Motorised Sieve shaker with Built-in Digital Timer Power: 250/300W (250 W at 220V, 60Hz) and Dimension (approx): 548X787X850mm Detailed Specification as per IS: 2720 Part- |
| 389 | Determination of Water Content |
| 390 | Equipment for Water Content Determination |
| 391 | Equipment for determination for water content comprises containers, balance, oven and desiccator {already included as part of other equipment elsewhere) Detailed specification as per IS: 2720 Part- |
| 392 | Determination of swelling index |
| 393 | i)Swell pressure Test Apparatus |
| 394 | Load frame of Capacity 5kN. (hand operated), mould 100mm dia. X 127.3 mm height with base plate & collar, proving Ring of Capacity 2.5kN, Dial Gauge 25mm travel with 0.01 mm least count, perforated swell plate of 100mm dia. X 16mm thick, Spacer 100mm dia.X12.7mm thick, pair of porous stones of 100mm dia. X 12.7mm thick, load transfer ball-steel ball and soaking tank of 250mm dia. X 210mm high detailed Specification as per IS: 2720 Part-XLI |
| 395 | ii) Free swell index |
| 396 | 425 micron IS sieve and 2 glass graduated cylinders of 100ml capacity. Detailed specifications as per IS: 2720 Part-XL |
| 397 | Laboratory determination of CBR |
| 398 | Laboratory CBR Test Apparatus |
| 399 | i) Load frame of 50kN capacity |
| 400 | ii) Mild Steel, Zinc plated Mould, 150mm ID X 175mm |
| 401 | iii) Mild Steel, Zinc plated perforated Base Plate |
| 402 | iv) Mid Steel Zinc plated Extension Collar 150mm ID X 50mm high |
| 403 | v) Space Disc of 148mm dia. And 47.7 mm thickness |
| 404 | vi) Metal weight 2.5 Kg, 147mm dia. With 53.3mm dia. Central hole |
| 405 | vii) Perforated Plate, 148mm dia. With adjustable stem and lock nut |
| 406 | Determination of optimum Moisture Content (OMC) by Light Compaction Test |
| 407 | Light Compaction Proctor Test apparatus |
| 408 | i).Compaction mould made of mild steel having 100mm dia. X 127.3 mm height and 1000ml volume |
| 409 | ii) Rammer 2.6 Kg X 310 mm Fall |
| 410 | Determination of Optimum Moisture Content (OMC) by Heavy Compaction |
| 411 | Heavy Compaction Proctor Test Apparatus |
| 412 | i) Compaction mould made of mild steel having 150mm dia. 127.3mm height 2305 ml volume |
| 413 | ii) Rammer 4.9Kg X 450mm fall |
| 414 | Determination of Liquid Limit |
| 415 | Liquid Limit Device Set |
| 416 | i) Casgrande Liquid Limit device hand operated, grooving tool, Gauge Block and Moisture Containers. |
| 417 | ii) Casgrande Liquid Limit Device motorised suitable for operation of 220V, 50Hz, single phase AC supply, with casgrande grooving tools |
| 418 | Determination of Liquid Limit by cone penetration method |
| 419 | Soil Cone, Penetrometer, Digital Type |
| 420 | Comprises stainless steel penetration cone 35mm long with smooth polished surface with an angel of 300C and penetration test cup of 55mm dia. X 40mm deep and it is suitable from operation on 220V, 50Hz, single phase AC supply |
| 421 | Determination of Plastic Limit |
| 422 | Equipment for Plastic Limit determination |
| 423 | Ground Glass plate 20X15 CM, Rod, 3mm dia. And 10cm long, spatuala, 100mm blade with wooden handle, moisture tin size 90mm X 20mm deep and porcelain Dish 50ml Capacity |
| 424 | Determination of Shrinkage Limit |
| 425 | Shrinkage Limit Set |
| 426 | i) Porcelain Evaporating Dish of 50ml capacity, Shrinkage Dish of 45mm dia. And 15mm height, Glass cup 50 to 60mm ID and 25mm H, Perspex Plate with three metal prongs of 75 mm X 75mm, Graduated jar of 25 ml sensitive 0.5ml, Mercury 750g and general items like spatula and straight edge. |
| 427 | Determination of PH Value |
| 428 | PH Metre |
| 429 | Should be able to indicate PH from 1 to 14 |
| 430 | Determination of specific gravity |
| 431 | Equipment for specific gravity determination |
| 432 | i)Pycnometer, 50ml Capacity |
| 433 | ii) Vacuum desiccators, size 200mm to 250mm in dia. |
| 434 | Determination of shear strength |
| 435 | Direct shear test apparatus |
| 436 | Shear box, Assembly comprise two halves, plane gripper plate, perforated gripper plate, porous stone, loading pad, base plate, Loading frame with direct and through lever systems for applying normal load up to 3kg/sq.cm. capacity, proving ring of 2kNcapacity and dial gauge of 25mm travel with 0.01 mm least count and Specimen cutter |
| 437 | Triaxial Shear Apparatus |
| 438 | Weighing Balance (5 Kg Capacity LC-0.5gms) |
| 439 | Determination of Unconfined Compressive Strength (UCS) of Soil |
| 440 | UCS test Apparatus |
| 441 | Compression Testing Machine of 1000kg capacity of standard rate of Loading |
| 442 | Standard Penetration Test |
| 443 | Standard Penetration Test Set |
| 444 | Standard penetration test set consisting of split spoon sampler, drive weight, guide pipe assembly, tripod with rope 19mm dia. X 10mt length |
| 445 | Testing on Aggregates |
| 446 | Determination of Specific gravity and water absorption |
| 447 | Equipment for Specific gravity Determination |
| 448 | Wire basket having 20cm dia. X 20cm high with not more than 6.3mm mesh, container 20cm dia. X20 high, Shallow tray 650X500X50mm |
| 449 | Sieve Analysis of aggregate |
| 450 | Equipment for Sieve Analysis of aggregate |
| 451 | i) Sieve G.I. Frame 60cm dia With sieve sizes of 25mm,106,100,90.80,75,63,53,50,45,40,37 .5,31.5,26.5,25,22.4.20,19,16,14,13.2,12.5,11 .2, 10,9.5,8.6,8,6.7,6 3,6,5.0,4.75 |
| 452 | ii) Sieve G.I. Frame60cm dia. With sieve sizes of 80,75,63,53,50,45,40,37.5,31.5,26.5,25,22. 4,20,19,16,14,13.2,12.5,11.2,10,9.5,8.6,8,6 .7,6.3,6, 5.0,4.75 |
| 453 | iii) Pan and cover for60mm and 30mm dia, Sieves |
| 454 | iv) Adopter for both sieves |
| 455 | v) Sieve shaker, Motorized, with Built-in Digital Timer having power: 250/300 W (250W at 220V, 60Hz) and dimensions (approx.). 548X787X850mm |
| 456 | Determination of aggregate crushing value |
| 457 | Aggregate Crushing value Test Apparatus |
| 458 | i)15cm dia. Cylinder with plunger and base plateii) Cylindrical measure, 115mm ID X 180mm Hiii) Tamping Rod, Steel, 16mm dia. |
| 459 | Determination of aggregate Impact value |
| 460 | Aggregate impact value test Apparatus |
| 461 | Impact testing Machine, Measuring Cylinder, 75mm ID X 50mm H |
| 462 | Los Angeles Abrasion Test |
| 463 | Los Angeles Abrasion testing machine with counter |
| 464 | Los Angeles Abrasion testing machine consists of a hollow cylinder of dimensions approx. 975X785X937mm, 12 hardened steel balls of 48 mm dia And digital controller box and weight 350kg. |
| 465 | Flakiness and Elongation Test of Aggregate |
| 466 | i) Length Gauge |
| 467 | i) Constructed from steel mounted on a hardwood base with ISI certification mark |
| 468 | ii) Thickness Gauge |
| 469 | ii) Constructed from heavy gauge sheet steel with ISI certification mark. |
| 470 | Determination of Soundness of Aggregate |
| 471 | Equipment for Aggregate Soundness determination |
| 472 | Sieves of standard size and small Containers Rest included in General Equipment |
| 473 | Weighing Balance (20 Kg Capacity LC-2gms) |
| 474 | Weighing Balance (100 Kg Capacity LC-10gms) |
| 475 | Testing of Cement / Concrete |
| 476 | Determination of fineness of Cement by Blain\"s air permeability method |
| 477 | Air permeability Apparatus (Blaine Type) |
| 478 | It consists of a stainless steel cell, perforated disc and plunger. A U-tube glass manometer is fit to the steel stand |
| 479 | Determine the consistency of Cement |
| 480 | Equipment for consistency of Cement determination |
| 481 | Vicat mould split type with clamping ring, Glass base plate, initial and final needle, consistency plunger, mild steel base plate and vicat mould split type with clamping |
| 482 | Determination of Heat of Hydration test |
| 483 | Heat of hydration Apparatus |
| 484 | Calorie Metre with Containers, Spatula |
| 485 | Soundness test of Cement |
| 486 | Soundness test Apparatus |
| 487 | i) Le-Chatelier mould, with ISI Certification Mark IS:5514 (2 Nos.)ii) Water Bath to maintain 270c (Included in the others) (1 No.)iii) Balances up to 1000g (1 No.) |
| 488 | Workability of concrete by slump cone test |
| 489 | Slump Cone Test Apparatus |
| 490 | The Mould having 20mm bottom dia. 10mm top dia. and 30mm height, rod and base plate |
| 491 | Workability of Concrete by compaction factor test |
| 492 | Compaction factor Test Apparatus |
| 493 | Compaction factor apparatus like Tamping rod of 16mm diameter and 60cm long Hoper |
| 494 | Determine the Compressive strength of cement |
| 495 | Equipment for Compressive Strength of Cement determination |
| 496 | i)Vibration machine specified speed of 1000KN vibrations per min. |
| 497 | ii) Vicat Apparatus with ISI Certification Mark, IS: 5513 |
| 498 | iii) Balances up to 1000g, Gauging trowel conforming to IS: 10086 |
| 499 | iv) 2000kN Compression Testing Machine, Electrically operated with three load gauges 2000kN,1000kN,500kN |
| 500 | Schmidt\"s Rebound hammer test |
| 501 | Rebound Hammer |
| 502 | Capable of measuring elastic properties of hardened concrete. Should be able to applying impact energy up to 2.027Nm. |
| 503 | Determination of Initial and Final setting time |
| 504 | Equipment for initial and final setting time determination |
| 505 | Vicat mould split type with damping ring, Stop watch graduated 0-60 seconds X 0.2 seconds |
| 506 | Concrete compression and Flexural Strength test |
| 507 | Equipment for compression and Flexural strength determination |
| 508 | i)Compression Testing Machine 100kN Electrically operated including Flexural Strength Testing Facility for normal and Accelerated curing |
| 509 | ii) Mould, Cast Iron for 150mm Cube with ISI Certification Mark |
| 510 | iii) Mould, Cast Iron for 100mm Cube with ISI Certification Mark |
| 511 | iv) Mould, Cast Iron for 100mm Beam with ISI Certification Mark |
| 512 | Humidity Chamber for Cement Test |
| 513 | Curing tank temprature controller (Heating & Cooling) |
| 514 | Mini concrete Mixture for Lab. |
| 515 | UPV (Ultra Sonic Pulse Velocity) for NDT Test |
| 516 | Anvil Apparatus for calibaration of Rebound Hammer |
| 517 | Acclerated Curing Tank |
| 518 | Testing on Bitumen |
| 519 | Sampling of Bitumen |
| 520 | Equipment for Bitumen Sampling |
| 521 | Bitumen sampler and sampling Tube Metal 1 Litre Capacity |
| 522 | Determination of Penetration value |
| 523 | Bitumen penetration kit |
| 524 | i) Cast Iron Base with levelling screws, digital penetration measurement gauge 0.01mm precision, release button, automatic zeroing |
| 525 | ii) Bitumen penetration kit like cylindrical glasses having 70mm diameter 40mm internal depth for the penetration 225 to 350 |
| 526 | Determination of softening point |
| 527 | Ring and Ball Apparatus |
| 528 | Two steel balls, two brass ring depth 6.4±0.1 mm inside dia. @ bottom 15.9+0.1 mm inside dia. @ top 17.5±0.1mm outside diameter 20,6±0.1mm and thermometer |
| 529 | Determination of Viscosity of Bitumen |
| 530 | Say bolt Viscometer |
| 531 | Two tubes include bath, Furol and Universal orifice, key, control box, stirring device, cooling coil, 60ml flask and digital thermo regulator |
| 532 | Determination Ductility of Bitumen |
| 533 | Ductility Testing Machine |
| 534 | Ductility Testing Machine with Digital temp Indicator and rate of travel 5cm/min and 1cm/min |
| 535 | Determination of Flash Point and Fire Point |
| 536 | Flash Point (open)and Fire Point Test Apparatus |
| 537 | Hot Plate, 160mm dia. |
| 538 | Determination of Specific Gravity of Bitumen |
| 539 | Specific Gravity test Apparatus |
| 540 | Specific Gravity Bottle 50ml capacity normal type with narrow mouth with 6mm diameter for Bitumen |
| 541 | Water Content of Bitumen |
| 542 | Water Content Test Apparatus |
| 543 | 500ml Flask Condenser made of heat resistant glass, shapes and dimensions as per code. Receiver made of heat resistant glass, shapes and dimensions as per code |
| 544 | Binder Extractor |
| 545 | Centrifuge Extractor |
| 546 | Capacity 1.5kg - Electrically operated, speed 0 rpm to 3600rpm. |
| 547 | Determine the Stripping Value |
| 548 | Stripping Value Test Apparatus |
| 549 | Beakers, 100ml Capacity |
| 550 | Measuring the Temperature |
| 551 | Digital Thermometer |
| 552 | Digital Thermometer - range 500c-2800C |
| 553 | Determine the Marshal Stability |
| 554 | Marshal Stability Apparatus |
| 555 | Marshal Stability Apparatus |
| 556 | Testing on Steel |
| 557 | Universal Testing Machine |
| 558 | PROPOSED LABORATORY EQUIPMENTS REQUIRED FORQUALITY CONTROL DIVISIONBALASORE (TO BE HANDED OVER TO THE E.E QUALITY CONTROL DIVISION BALASORE/ HIS AUTHORISED PERSON) |
| 559 | Grain Size Analysis |
| 560 | Equipment for Grain Size Analysis |
| 561 | i)Sieves of brass frame 20CM dia. with sizes10mm,5.6mm,4.75,4,3.35,2.8,2.36,2.1.7,1.6,1.4,1.18,1.0,0.85,0.71,0.6,0.5,0.425,0.355,0.3,0.25,0.212,0.18,0.16,0.15,0.125,0.106,0.09,0.08,0.075,0.63,0.53,0.45,0.38 |
| 562 | ii)Pan & Cover for 20CM dia. sieves |
| 563 | iii) Motorised Sieve shaker with Built-in Digital Timer Power: 250/300W (250 W at 220V, 60Hz) and Dimension (approx): 548X787X850mm Detailed Specification as per IS: 2720 Part- |
| 564 | Determination of Water Content |
| 565 | Equipment for Water Content Determination |
| 566 | Equipment for determination for water content comprises containers, balance, oven and desiccator {already included as part of other equipment elsewhere) Detailed specification as per IS: 2720 Part- |
| 567 | Determination of swelling index |
| 568 | i)Swell pressure Test Apparatus |
| 569 | Load frame of Capacity 5kN. (hand operated), mould 100mm dia. X 127.3 mm height with base plate & collar, proving Ring of Capacity 2.5kN, Dial Gauge 25mm travel with 0.01 mm least count, perforated swell plate of 100mm dia. X 16mm thick, Spacer 100mm dia.X12.7mm thick, pair of porous stones of 100mm dia. X 12.7mm thick, load transfer ball-steel ball and soaking tank of 250mm dia. X 210mm high detailed Specification as per IS: 2720 Part-XLI |
| 570 | ii) Free swell index |
| 571 | 425 micron IS sieve and 2 glass graduated cylinders of 100ml capacity. Detailed specifications as per IS: 2720 Part-XL |
| 572 | Laboratory determination of CBR |
| 573 | Laboratory CBR Test Apparatus |
| 574 | i) Load frame of 50kN capacity |
| 575 | ii) Mild Steel, Zinc plated Mould, 150mm ID X 175mm |
| 576 | iii) Mild Steel, Zinc plated perforated Base Plate |
| 577 | iv) Mid Steel Zinc plated Extension Collar 150mm ID X 50mm high |
| 578 | v) Space Disc of 148mm dia. And 47.7 mm thickness |
| 579 | vi) Metal weight 2.5 Kg, 147mm dia. With 53.3mm dia. Central hole |
| 580 | vii) Perforated Plate, 148mm dia. With adjustable stem and lock nut |
| 581 | Determination of optimum Moisture Content (OMC) by Light Compaction Test |
| 582 | Light Compaction Proctor Test apparatus |
| 583 | i).Compaction mould made of mild steel having 100mm dia. X 127.3 mm height and 1000ml volume |
| 584 | ii) Rammer 2.6 Kg X 310 mm Fall |
| 585 | Determination of Optimum Moisture Content (OMC) by Heavy Compaction |
| 586 | Heavy Compaction Proctor Test Apparatus |
| 587 | i) Compaction mould made of mild steel having 150mm dia. 127.3mm height 2305 ml volume |
| 588 | ii) Rammer 4.9Kg X 450mm fall |
| 589 | Determination of Liquid Limit |
| 590 | Liquid Limit Device Set |
| 591 | i) Casgrande Liquid Limit device hand operated, grooving tool, Gauge Block and Moisture Containers. |
| 592 | ii) Casgrande Liquid Limit Device motorised suitable for operation of 220V, 50Hz, single phase AC supply, with casgrande grooving tools |
| 593 | Determination of Liquid Limit by cone penetration method |
| 594 | Soil Cone, Penetrometer, Digital Type |
| 595 | Comprises stainless steel penetration cone 35mm long with smooth polished surface with an angel of 300C and penetration test cup of 55mm dia. X 40mm deep and it is suitable from operation on 220V, 50Hz, single phase AC supply |
| 596 | Determination of Plastic Limit |
| 597 | Equipment for Plastic Limit determination |
| 598 | Ground Glass plate 20X15 CM, Rod, 3mm dia. And 10cm long, spatuala, 100mm blade with wooden handle, moisture tin size 90mm X 20mm deep and porcelain Dish 50ml Capacity |
| 599 | Determination of Shrinkage Limit |
| 600 | Shrinkage Limit Set |
| 601 | i) Porcelain Evaporating Dish of 50ml capacity, Shrinkage Dish of 45mm dia. And 15mm height, Glass cup 50 to 60mm ID and 25mm H, Perspex Plate with three metal prongs of 75 mm X 75mm, Graduated jar of 25 ml sensitive 0.5ml, Mercury 750g and general items like spatula and straight edge. |
| 602 | Determination of PH Value |
| 603 | PH Metre |
| 604 | Should be able to indicate PH from 1 to 14 |
| 605 | Determination of specific gravity |
| 606 | Equipment for specific gravity determination |
| 607 | i)Pycnometer, 50ml Capacity |
| 608 | ii) Vacuum desiccators, size 200mm to 250mm in dia. |
| 609 | Determination of shear strength |
| 610 | Direct shear test apparatus |
| 611 | Shear box, Assembly comprise two halves, plane gripper plate, perforated gripper plate, porous stone, loading pad, base plate, Loading frame with direct and through lever systems for applying normal load up to 3kg/sq.cm. capacity, proving ring of 2kNcapacity and dial gauge of 25mm travel with 0.01 mm least count and Specimen cutter |
| 612 | Digital Triaxial Shear Apparatus |
| 613 | Weighing Balance (5 Kg Capacity LC-0.5gms) |
| 614 | Determination of Unconfined Compressive Strength (UCS) of Soil |
| 615 | UCS test Apparatus |
| 616 | Compression Testing Machine of 1000kg capacity of standard rate of Loading |
| 617 | Standard Penetration Test |
| 618 | Standard Penetration Test Set |
| 619 | Standard penetration test set consisting of split spoon sampler, drive weight, guide pipe assembly, tripod with rope 19mm dia. X 10mt length |
| 620 | Testing on Aggregates |
| 621 | Determination of Specific gravity and water absorption |
| 622 | Equipment for Specific gravity Determination |
| 623 | Wire basket having 20cm dia. X 20cm high with not more than 6.3mm mesh, container 20cm dia. X20 high, Shallow tray 650X500X50mm |
| 624 | Sieve Analysis of aggregate |
| 625 | Equipment for Sieve Analysis of aggregate |
| 626 | i) Sieve G.I. Frame 60cm dia With sieve sizes of 25mm,106,100,90.80,75,63,53,50,45,40,37 .5,31.5,26.5,25,22.4.20,19,16,14,13.2,12.5,11 .2, 10,9.5,8.6,8,6.7,6 3,6,5.0,4.75 |
| 627 | ii) Sieve G.I. Frame60cm dia. With sieve sizes of 80,75,63,53,50,45,40,37.5,31.5,26.5,25,22. 4,20,19,16,14,13.2,12.5,11.2,10,9.5,8.6,8,6 .7,6.3,6, 5.0,4.75 |
| 628 | iii) Pan and cover for60mm and 30mm dia, Sieves |
| 629 | iv) Adopter for both sieves |
| 630 | v) Sieve shaker, Motorized, with Built-in Digital Timer having power: 250/300 W (250W at 220V, 60Hz) and dimensions (approx.). 548X787X850mm |
| 631 | Determination of aggregate crushing value |
| 632 | Aggregate Crushing value Test Apparatus |
| 633 | i)15cm dia. Cylinder with plunger and base plateii) Cylindrical measure, 115mm ID X 180mm Hiii) Tamping Rod, Steel, 16mm dia. |
| 634 | Determination of aggregate Impact value |
| 635 | Aggregate impact value test Apparatus |
| 636 | Impact testing Machine, Measuring Cylinder, 75mm ID X 50mm H |
| 637 | Los Angeles Abrasion Test |
| 638 | Los Angeles Abrasion testing machine with counter |
| 639 | Los Angeles Abrasion testing machine consists of a hollow cylinder of dimensions approx. 975X785X937mm, 12 hardened steel balls of 48 mm dia And digital controller box and weight 350kg. |
| 640 | Flakiness and Elongation Test of Aggregate |
| 641 | i) Length Gauge |
| 642 | i) Constructed from steel mounted on a hardwood base with ISI certification mark |
| 643 | ii) Thickness Gauge |
| 644 | ii) Constructed from heavy gauge sheet steel with ISI certification mark. |
| 645 | Determination of Soundness of Aggregate |
| 646 | Equipment for Aggregate Soundness determination |
| 647 | Sieves of standard size and small Containers Rest included in General Equipment |
| 648 | Weighing Balance (20 Kg Capacity LC-2gms) |
| 649 | Weighing Balance (100 Kg Capacity LC-10gms) |
| 650 | Testing of Cement / Concrete |
| 651 | Determination of fineness of Cement by Blain\"s air permeability method |
| 652 | Air permeability Apparatus (Blaine Type) |
| 653 | It consists of a stainless steel cell, perforated disc and plunger. A U-tube glass manometer is fit to the steel stand |
| 654 | Determine the consistency of Cement |
| 655 | Equipment for consistency of Cement determination |
| 656 | Vicat mould split type with clamping ring, Glass base plate, initial and final needle, consistency plunger, mild steel base plate and vicat mould split type with clamping |
| 657 | Determination of Heat of Hydration test |
| 658 | Heat of hydration Apparatus |
| 659 | Calorie Metre with Containers, Spatula |
| 660 | Soundness test of Cement |
| 661 | Soundness test Apparatus |
| 662 | i) Le-Chatelier mould, with ISI Certification Mark IS:5514 (2 Nos.)ii) Water Bath to maintain 270c (Included in the others) (1 No.)iii) Balances up to 1000g (1 No.) |
| 663 | Workability of concrete by slump cone test |
| 664 | Slump Cone Test Apparatus |
| 665 | The Mould having 20mm bottom dia. 10mm top dia. and 30mm height, rod and base plate |
| 666 | Workability of Concrete by compaction factor test |
| 667 | Compaction factor Test Apparatus |
| 668 | Compaction factor apparatus like Tamping rod of 16mm diameter and 60cm long Hoper |
| 669 | Determine the Compressive strength of cement |
| 670 | Equipment for Compressive Strength of Cement determination |
| 671 | i)Vibration machine specified speed of 1000KN vibrations per min. |
| 672 | ii) Vicat Apparatus with ISI Certification Mark, IS: 5513 |
| 673 | iii) Balances up to 1000g, Gauging trowel conforming to IS: 10086 |
| 674 | iv) 2000kN Compression Testing Machine, Electrically operated with three load gauges 2000kN,1000kN,500kN |
| 675 | Schmidt\"s Rebound hammer test |
| 676 | Rebound Hammer |
| 677 | Capable of measuring elastic properties of hardened concrete. Should be able to applying impact energy up to 2.027Nm. |
| 678 | Determination of Initial and Final setting time |
| 679 | Equipment for initial and final setting time determination |
| 680 | Vicat mould split type with damping ring, Stop watch graduated 0-60 seconds X 0.2 seconds |
| 681 | Concrete compression and Flexural Strength test |
| 682 | Equipment for compression and Flexural strength determination |
| 683 | i)Compression Testing Machine 100kN Electrically operated including Flexural Strength Testing Facility for normal and Accelerated curing |
| 684 | ii) Mould, Cast Iron for 150mm Cube with ISI Certification Mark |
| 685 | iii) Mould, Cast Iron for 100mm Cube with ISI Certification Mark |
| 686 | iv) Mould, Cast Iron for 100mm Beam with ISI Certification Mark |
| 687 | Humidity Chamber for Cement Test |
| 688 | Curing tank temprature controller (Heating & Cooling) |
| 689 | Mini concrete Mixture for Lab. |
| 690 | UPV (Ultra Sonic Pulse Velocity) for NDT Test |
| 691 | Anvil Apparatus for calibaration of Rebound Hammer |
| 692 | Acclerated Curing Tank |
| 693 | Testing on Bitumen |
| 694 | Sampling of Bitumen |
| 695 | Equipment for Bitumen Sampling |
| 696 | Bitumen sampler and sampling Tube Metal 1 Litre Capacity |
| 697 | Determination of Penetration value |
| 698 | Bitumen penetration kit |
| 699 | i) Cast Iron Base with levelling screws, digital penetration measurement gauge 0.01mm precision, release button, automatic zeroing |
| 700 | ii) Bitumen penetration kit like cylindrical glasses having 70mm diameter 40mm internal depth for the penetration 225 to 350 |
| 701 | Determination of softening point |
| 702 | Ring and Ball Apparatus |
| 703 | Two steel balls, two brass ring depth 6.4±0.1 mm inside dia. @ bottom 15.9+0.1 mm inside dia. @ top 17.5±0.1mm outside diameter 20,6±0.1mm and thermometer |
| 704 | Determination of Viscosity of Bitumen |
| 705 | Say bolt Viscometer |
| 706 | Two tubes include bath, Furol and Universal orifice, key, control box, stirring device, cooling coil, 60ml flask and digital thermo regulator |
| 707 | Determination Ductility of Bitumen |
| 708 | Ductility Testing Machine |
| 709 | Ductility Testing Machine with Digital temp Indicator and rate of travel 5cm/min and 1cm/min |
| 710 | Determination of Flash Point and Fire Point |
| 711 | Flash Point (open)and Fire Point Test Apparatus |
| 712 | Hot Plate, 160mm dia. |
| 713 | Determination of Specific Gravity of Bitumen |
| 714 | Specific Gravity test Apparatus |
| 715 | Specific Gravity Bottle 50ml capacity normal type with narrow mouth with 6mm diameter for Bitumen |
| 716 | Water Content of Bitumen |
| 717 | Water Content Test Apparatus |
| 718 | 500ml Flask Condenser made of heat resistant glass, shapes and dimensions as per code. Receiver made of heat resistant glass, shapes and dimensions as per code |
| 719 | Binder Extractor |
| 720 | Centrifuge Extractor |
| 721 | Capacity 1.5kg - Electrically operated, speed 0 rpm to 3600rpm. |
| 722 | Determine the Stripping Value |
| 723 | Stripping Value Test Apparatus |
| 724 | Beakers, 100ml Capacity |
| 725 | Measuring the Temperature |
| 726 | Digital Thermometer |
| 727 | Digital Thermometer - range 500c-2800C |
| 728 | Determine the Marshal Stability |
| 729 | Marshal Stability Apparatus |
| 730 | Marshal Stability Apparatus |
| 731 | Testing on Steel |
| 732 | Universal Testing Machine |
| 733 | PROPOSED LABORATORY EQUIPMENTS REQUIRED FOR QUALITY CONTROL DIVISIONSSAMBALPUR (TO BE HANDED OVER TO THE E.E QUALITY CONTROL DIVISION SAMBALPUR/ HIS AUTHORISED PERSON) |
| 734 | Grain Size Analysis |
| 735 | Equipment for Grain Size Analysis |
| 736 | i)Sieves of brass frame 20CM dia. with sizes10mm,5.6mm,4.75,4,3.35,2.8,2.36,2.1.7,1.6,1.4,1.18,1.0,0.85,0.71,0.6,0.5,0.425,0.355,0.3,0.25,0.212,0.18,0.16,0.15,0.125,0.106,0.09,0.08,0.075,0.63,0.53,0.45,0.38 |
| 737 | ii)Pan & Cover for 20CM dia. sieves |
| 738 | iii) Motorised Sieve shaker with Built-in Digital Timer Power: 250/300W (250 W at 220V, 60Hz) and Dimension (approx): 548X787X850mm Detailed Specification as per IS: 2720 Part- |
| 739 | Determination of Water Content |
| 740 | Equipment for Water Content Determination |
| 741 | Equipment for determination for water content comprises containers, balance, oven and desiccator {already included as part of other equipment elsewhere) Detailed specification as per IS: 2720 Part- |
| 742 | Determination of swelling index |
| 743 | i)Swell pressure Test Apparatus |
| 744 | Load frame of Capacity 5kN. (hand operated), mould 100mm dia. X 127.3 mm height with base plate & collar, proving Ring of Capacity 2.5kN, Dial Gauge 25mm travel with 0.01 mm least count, perforated swell plate of 100mm dia. X 16mm thick, Spacer 100mm dia.X12.7mm thick, pair of porous stones of 100mm dia. X 12.7mm thick, load transfer ball-steel ball and soaking tank of 250mm dia. X 210mm high detailed Specification as per IS: 2720 Part-XLI |
| 745 | ii) Free swell index |
| 746 | 425 micron IS sieve and 2 glass graduated cylinders of 100ml capacity. Detailed specifications as per IS: 2720 Part-XL |
| 747 | Laboratory determination of CBR |
| 748 | Laboratory CBR Test Apparatus |
| 749 | i) Load frame of 50kN capacity |
| 750 | ii) Mild Steel, Zinc plated Mould, 150mm ID X 175mm |
| 751 | iii) Mild Steel, Zinc plated perforated Base Plate |
| 752 | iv) Mid Steel Zinc plated Extension Collar 150mm ID X 50mm high |
| 753 | v) Space Disc of 148mm dia. And 47.7 mm thickness |
| 754 | vi) Metal weight 2.5 Kg, 147mm dia. With 53.3mm dia. Central hole |
| 755 | vii) Perforated Plate, 148mm dia. With adjustable stem and lock nut |
| 756 | Determination of optimum Moisture Content (OMC) by Light Compaction Test |
| 757 | Light Compaction Proctor Test apparatus |
| 758 | i).Compaction mould made of mild steel having 100mm dia. X 127.3 mm height and 1000ml volume |
| 759 | ii) Rammer 2.6 Kg X 310 mm Fall |
| 760 | Determination of Optimum Moisture Content (OMC) by Heavy Compaction |
| 761 | Heavy Compaction Proctor Test Apparatus |
| 762 | i) Compaction mould made of mild steel having 150mm dia. 127.3mm height 2305 ml volume |
| 763 | ii) Rammer 4.9Kg X 450mm fall |
| 764 | Determination of Liquid Limit |
| 765 | Liquid Limit Device Set |
| 766 | i) Casgrande Liquid Limit device hand operated, grooving tool, Gauge Block and Moisture Containers. |
| 767 | ii) Casgrande Liquid Limit Device motorised suitable for operation of 220V, 50Hz, single phase AC supply, with casgrande grooving tools |
| 768 | Determination of Liquid Limit by cone penetration method |
| 769 | Soil Cone, Penetrometer, Digital Type |
| 770 | Comprises stainless steel penetration cone 35mm long with smooth polished surface with an angel of 300C and penetration test cup of 55mm dia. X 40mm deep and it is suitable from operation on 220V, 50Hz, single phase AC supply |
| 771 | Determination of Plastic Limit |
| 772 | Equipment for Plastic Limit determination |
| 773 | Ground Glass plate 20X15 CM, Rod, 3mm dia. And 10cm long, spatuala, 100mm blade with wooden handle, moisture tin size 90mm X 20mm deep and porcelain Dish 50ml Capacity |
| 774 | Determination of Shrinkage Limit |
| 775 | Shrinkage Limit Set |
| 776 | i) Porcelain Evaporating Dish of 50ml capacity, Shrinkage Dish of 45mm dia. And 15mm height, Glass cup 50 to 60mm ID and 25mm H, Perspex Plate with three metal prongs of 75 mm X 75mm, Graduated jar of 25 ml sensitive 0.5ml, Mercury 750g and general items like spatula and straight edge. |
| 777 | Determination of PH Value |
| 778 | PH Metre |
| 779 | Should be able to indicate PH from 1 to 14 |
| 780 | Determination of specific gravity |
| 781 | Equipment for specific gravity determination |
| 782 | i)Pycnometer, 50ml Capacity |
| 783 | ii) Vacuum desiccators, size 200mm to 250mm in dia. |
| 784 | Determination of shear strength |
| 785 | Direct shear test apparatus |
| 786 | Shear box, Assembly comprise two halves, plane gripper plate, perforated gripper plate, porous stone, loading pad, base plate, Loading frame with direct and through lever systems for applying normal load up to 3kg/sq.cm. capacity, proving ring of 2kNcapacity and dial gauge of 25mm travel with 0.01 mm least count and Specimen cutter |
| 787 | Triaxial Shear Apparatus |
| 788 | Weighing Balance (5 Kg Capacity LC-0.5gms) |
| 789 | Determination of Unconfined Compressive Strength (UCS) of Soil |
| 790 | UCS test Apparatus |
| 791 | Compression Testing Machine of 1000kg capacity of standard rate of Loading |
| 792 | Standard Penetration Test |
| 793 | Standard Penetration Test Set |
| 794 | Standard penetration test set consisting of split spoon sampler, drive weight, guide pipe assembly, tripod with rope 19mm dia. X 10mt length |
| 795 | Testing on Aggregates |
| 796 | Determination of Specific gravity and water absorption |
| 797 | Equipment for Specific gravity Determination |
| 798 | Wire basket having 20cm dia. X 20cm high with not more than 6.3mm mesh, container 20cm dia. X20 high, Shallow tray 650X500X50mm |
| 799 | Sieve Analysis of aggregate |
| 800 | Equipment for Sieve Analysis of aggregate |
| 801 | i) Sieve G.I. Frame 60cm dia With sieve sizes of 25mm,106,100,90.80,75,63,53,50,45,40,37 .5,31.5,26.5,25,22.4.20,19,16,14,13.2,12.5,11 .2, 10,9.5,8.6,8,6.7,6 3,6,5.0,4.75 |
| 802 | ii) Sieve G.I. Frame60cm dia. With sieve sizes of 80,75,63,53,50,45,40,37.5,31.5,26.5,25,22. 4,20,19,16,14,13.2,12.5,11.2,10,9.5,8.6,8,6 .7,6.3,6, 5.0,4.75 |
| 803 | iii) Pan and cover for60mm and 30mm dia, Sieves |
| 804 | iv) Adopter for both sieves |
| 805 | v) Sieve shaker, Motorized, with Built-in Digital Timer having power: 250/300 W (250W at 220V, 60Hz) and dimensions (approx.). 548X787X850mm |
| 806 | Determination of aggregate crushing value |
| 807 | Aggregate Crushing value Test Apparatus |
| 808 | i)15cm dia. Cylinder with plunger and base plateii) Cylindrical measure, 115mm ID X 180mm Hiii) Tamping Rod, Steel, 16mm dia. |
| 809 | Determination of aggregate Impact value |
| 810 | Aggregate impact value test Apparatus |
| 811 | Impact testing Machine, Measuring Cylinder, 75mm ID X 50mm H |
| 812 | Los Angeles Abrasion Test |
| 813 | Los Angeles Abrasion testing machine with counter |
| 814 | Los Angeles Abrasion testing machine consists of a hollow cylinder of dimensions approx. 975X785X937mm, 12 hardened steel balls of 48 mm dia And digital controller box and weight 350kg. |
| 815 | Flakiness and Elongation Test of Aggregate |
| 816 | i) Length Gauge |
| 817 | i) Constructed from steel mounted on a hardwood base with ISI certification mark |
| 818 | ii) Thickness Gauge |
| 819 | ii) Constructed from heavy gauge sheet steel with ISI certification mark. |
| 820 | Determination of Soundness of Aggregate |
| 821 | Equipment for Aggregate Soundness determination |
| 822 | Sieves of standard size and small Containers Rest included in General Equipment |
| 823 | Weighing Balance (20 Kg Capacity LC-2gms) |
| 824 | Weighing Balance (100 Kg Capacity LC-10gms) |
| 825 | Testing of Cement / Concrete |
| 826 | Determination of fineness of Cement by Blain\"s air permeability method |
| 827 | Air permeability Apparatus (Blaine Type) |
| 828 | It consists of a stainless steel cell, perforated disc and plunger. A U-tube glass manometer is fit to the steel stand |
| 829 | Determine the consistency of Cement |
| 830 | Equipment for consistency of Cement determination |
| 831 | Vicat mould split type with clamping ring, Glass base plate, initial and final needle, consistency plunger, mild steel base plate and vicat mould split type with clamping |
| 832 | Determination of Heat of Hydration test |
| 833 | Heat of hydration Apparatus |
| 834 | Calorie Metre with Containers, Spatula |
| 835 | Soundness test of Cement |
| 836 | Soundness test Apparatus |
| 837 | i) Le-Chatelier mould, with ISI Certification Mark IS:5514 (2 Nos.)ii) Water Bath to maintain 270c (Included in the others) (1 No.)iii) Balances up to 1000g (1 No.) |
| 838 | Workability of concrete by slump cone test |
| 839 | Slump Cone Test Apparatus |
| 840 | The Mould having 20mm bottom dia. 10mm top dia. and 30mm height, rod and base plate |
| 841 | Workability of Concrete by compaction factor test |
| 842 | Compaction factor Test Apparatus |
| 843 | Compaction factor apparatus like Tamping rod of 16mm diameter and 60cm long Hoper |
| 844 | Determine the Compressive strength of cement |
| 845 | Equipment for Compressive Strength of Cement determination |
| 846 | i)Vibration machine specified speed of 1000KN vibrations per min. |
| 847 | ii) Vicat Apparatus with ISI Certification Mark, IS: 5513 |
| 848 | iii) Balances up to 1000g, Gauging trowel conforming to IS: 10086 |
| 849 | iv) 2000kN Compression Testing Machine, Electrically operated with three load gauges 2000kN,1000kN,500kN |
| 850 | Schmidt\"s Rebound hammer test |
| 851 | Rebound Hammer |
| 852 | Capable of measuring elastic properties of hardened concrete. Should be able to applying impact energy up to 2.027Nm. |
| 853 | Determination of Initial and Final setting time |
| 854 | Equipment for initial and final setting time determination |
| 855 | Vicat mould split type with damping ring, Stop watch graduated 0-60 seconds X 0.2 seconds |
| 856 | Concrete compression and Flexural Strength test |
| 857 | Equipment for compression and Flexural strength determination |
| 858 | i)Compression Testing Machine 100kN Electrically operated including Flexural Strength Testing Facility for normal and Accelerated curing |
| 859 | ii) Mould, Cast Iron for 150mm Cube with ISI Certification Mark |
| 860 | iii) Mould, Cast Iron for 100mm Cube with ISI Certification Mark |
| 861 | iv) Mould, Cast Iron for 100mm Beam with ISI Certification Mark |
| 862 | Humidity Chamber for Cement Test |
| 863 | Curing tank temprature controller (Heating & Cooling) |
| 864 | Mini concrete Mixture for Lab. |
| 865 | UPV (Ultra Sonic Pulse Velocity) for NDT Test |
| 866 | Anvil Apparatus for calibaration of Rebound Hammer |
| 867 | Acclerated Curing Tank |
| 868 | Testing on Bitumen |
| 869 | Sampling of Bitumen |
| 870 | Equipment for Bitumen Sampling |
| 871 | Bitumen sampler and sampling Tube Metal 1 Litre Capacity |
| 872 | Determination of Penetration value |
| 873 | Bitumen penetration kit |
| 874 | i) Cast Iron Base with levelling screws, digital penetration measurement gauge 0.01mm precision, release button, automatic zeroing |
| 875 | ii) Bitumen penetration kit like cylindrical glasses having 70mm diameter 40mm internal depth for the penetration 225 to 350 |
| 876 | Determination of softening point |
| 877 | Ring and Ball Apparatus |
| 878 | Two steel balls, two brass ring depth 6.4±0.1 mm inside dia. @ bottom 15.9+0.1 mm inside dia. @ top 17.5±0.1mm outside diameter 20,6±0.1mm and thermometer |
| 879 | Determination of Viscosity of Bitumen |
| 880 | Say bolt Viscometer |
| 881 | Two tubes include bath, Furol and Universal orifice, key, control box, stirring device, cooling coil, 60ml flask and digital thermo regulator |
| 882 | Determination Ductility of Bitumen |
| 883 | Ductility Testing Machine |
| 884 | Ductility Testing Machine with Digital temp Indicator and rate of travel 5cm/min and 1cm/min |
| 885 | Determination of Flash Point and Fire Point |
| 886 | Flash Point (open)and Fire Point Test Apparatus |
| 887 | Hot Plate, 160mm dia. |
| 888 | Determination of Specific Gravity of Bitumen |
| 889 | Specific Gravity test Apparatus |
| 890 | Specific Gravity Bottle 50ml capacity normal type with narrow mouth with 6mm diameter for Bitumen |
| 891 | Water Content of Bitumen |
| 892 | Water Content Test Apparatus |
| 893 | 500ml Flask Condenser made of heat resistant glass, shapes and dimensions as per code. Receiver made of heat resistant glass, shapes and dimensions as per code |
| 894 | Binder Extractor |
| 895 | Centrifuge Extractor |
| 896 | Capacity 1.5kg - Electrically operated, speed 0 rpm to 3600rpm. |
| 897 | Determine the Stripping Value |
| 898 | Stripping Value Test Apparatus |
| 899 | Beakers, 100ml Capacity |
| 900 | Measuring the Temperature |
| 901 | Digital Thermometer |
| 902 | Digital Thermometer - range 500c-2800C |
| 903 | Determine the Marshal Stability |
| 904 | Marshal Stability Apparatus |
| 905 | Marshal Stability Apparatus |
| 906 | Testing on Steel |
| 907 | Universal Testing Machine |
| 908 | PROPOSED LABORATORY EQUIPMENTS REQUIRED FORQUALITY CONTROL DIVISIONBERHAMPUR (TO BE HANDED OVER TO THE E.E QUALITY CONTROL DIVISION BERHAMPUR/ HIS AUTHORISED PERSON) |
| 909 | Grain Size Analysis |
| 910 | Equipment for Grain Size Analysis |
| 911 | i)Sieves of brass frame 20CM dia. with sizes10mm,5.6mm,4.75,4,3.35,2.8,2.36,2.1.7,1.6,1.4,1.18,1.0,0.85,0.71,0.6,0.5,0.425,0.355,0.3,0.25,0.212,0.18,0.16,0.15,0.125,0.106,0.09,0.08,0.075,0.63,0.53,0.45,0.38 |
| 912 | ii)Pan & Cover for 20CM dia. sieves |
| 913 | iii) Motorised Sieve shaker with Built-in Digital Timer Power: 250/300W (250 W at 220V, 60Hz) and Dimension (approx): 548X787X850mm Detailed Specification as per IS: 2720 Part- |
| 914 | Determination of Water Content |
| 915 | Equipment for Water Content Determination |
| 916 | Equipment for determination for water content comprises containers, balance, oven and desiccator {already included as part of other equipment elsewhere) Detailed specification as per IS: 2720 Part- |
| 917 | Determination of swelling index |
| 918 | i)Swell pressure Test Apparatus |
| 919 | Load frame of Capacity 5kN. (hand operated), mould 100mm dia. X 127.3 mm height with base plate & collar, proving Ring of Capacity 2.5kN, Dial Gauge 25mm travel with 0.01 mm least count, perforated swell plate of 100mm dia. X 16mm thick, Spacer 100mm dia.X12.7mm thick, pair of porous stones of 100mm dia. X 12.7mm thick, load transfer ball-steel ball and soaking tank of 250mm dia. X 210mm high detailed Specification as per IS: 2720 Part-XLI |
| 920 | ii) Free swell index |
| 921 | 425 micron IS sieve and 2 glass graduated cylinders of 100ml capacity. Detailed specifications as per IS: 2720 Part-XL |
| 922 | Laboratory determination of CBR |
| 923 | Laboratory CBR Test Apparatus |
| 924 | i) Load frame of 50kN capacity |
| 925 | ii) Mild Steel, Zinc plated Mould, 150mm ID X 175mm |
| 926 | iii) Mild Steel, Zinc plated perforated Base Plate |
| 927 | iv) Mid Steel Zinc plated Extension Collar 150mm ID X 50mm high |
| 928 | v) Space Disc of 148mm dia. And 47.7 mm thickness |
| 929 | vi) Metal weight 2.5 Kg, 147mm dia. With 53.3mm dia. Central hole |
| 930 | vii) Perforated Plate, 148mm dia. With adjustable stem and lock nut |
| 931 | Determination of optimum Moisture Content (OMC) by Light Compaction Test |
| 932 | Light Compaction Proctor Test apparatus |
| 933 | i).Compaction mould made of mild steel having 100mm dia. X 127.3 mm height and 1000ml volume |
| 934 | ii) Rammer 2.6 Kg X 310 mm Fall |
| 935 | Determination of Optimum Moisture Content (OMC) by Heavy Compaction |
| 936 | Heavy Compaction Proctor Test Apparatus |
| 937 | i) Compaction mould made of mild steel having 150mm dia. 127.3mm height 2305 ml volume |
| 938 | ii) Rammer 4.9Kg X 450mm fall |
| 939 | Determination of Liquid Limit |
| 940 | Liquid Limit Device Set |
| 941 | i) Casgrande Liquid Limit device hand operated, grooving tool, Gauge Block and Moisture Containers. |
| 942 | ii) Casgrande Liquid Limit Device motorised suitable for operation of 220V, 50Hz, single phase AC supply, with casgrande grooving tools |
| 943 | Determination of Liquid Limit by cone penetration method |
| 944 | Soil Cone, Penetrometer, Digital Type |
| 945 | Comprises stainless steel penetration cone 35mm long with smooth polished surface with an angel of 300C and penetration test cup of 55mm dia. X 40mm deep and it is suitable from operation on 220V, 50Hz, single phase AC supply |
| 946 | Determination of Plastic Limit |
| 947 | Equipment for Plastic Limit determination |
| 948 | Ground Glass plate 20X15 CM, Rod, 3mm dia. And 10cm long, spatuala, 100mm blade with wooden handle, moisture tin size 90mm X 20mm deep and porcelain Dish 50ml Capacity |
| 949 | Determination of Shrinkage Limit |
| 950 | Shrinkage Limit Set |
| 951 | i) Porcelain Evaporating Dish of 50ml capacity, Shrinkage Dish of 45mm dia. And 15mm height, Glass cup 50 to 60mm ID and 25mm H, Perspex Plate with three metal prongs of 75 mm X 75mm, Graduated jar of 25 ml sensitive 0.5ml, Mercury 750g and general items like spatula and straight edge. |
| 952 | Determination of PH Value |
| 953 | PH Metre |
| 954 | Should be able to indicate PH from 1 to 14 |
| 955 | Determination of specific gravity |
| 956 | Equipment for specific gravity determination |
| 957 | i)Pycnometer, 50ml Capacity |
| 958 | ii) Vacuum desiccators, size 200mm to 250mm in dia. |
| 959 | Determination of shear strength |
| 960 | Direct shear test apparatus |
| 961 | Shear box, Assembly comprise two halves, plane gripper plate, perforated gripper plate, porous stone, loading pad, base plate, Loading frame with direct and through lever systems for applying normal load up to 3kg/sq.cm. capacity, proving ring of 2kNcapacity and dial gauge of 25mm travel with 0.01 mm least count and Specimen cutter |
| 962 | Triaxial Shear Apparatus |
| 963 | Weighing Balance (5 Kg Capacity LC-0.5gms) |
| 964 | Determination of Unconfined Compressive Strength (UCS) of Soil |
| 965 | UCS test Apparatus |
| 966 | Compression Testing Machine of 1000kg capacity of standard rate of Loading |
| 967 | Standard Penetration Test |
| 968 | Standard Penetration Test Set |
| 969 | Standard penetration test set consisting of split spoon sampler, drive weight, guide pipe assembly, tripod with rope 19mm dia. X 10mt length |
| 970 | Testing on Aggregates |
| 971 | Determination of Specific gravity and water absorption |
| 972 | Equipment for Specific gravity Determination |
| 973 | Wire basket having 20cm dia. X 20cm high with not more than 6.3mm mesh, container 20cm dia. X20 high, Shallow tray 650X500X50mm |
| 974 | Sieve Analysis of aggregate |
| 975 | Equipment for Sieve Analysis of aggregate |
| 976 | i) Sieve G.I. Frame 60cm dia With sieve sizes of 25mm,106,100,90.80,75,63,53,50,45,40,37 .5,31.5,26.5,25,22.4.20,19,16,14,13.2,12.5,11 .2, 10,9.5,8.6,8,6.7,6 3,6,5.0,4.75 |
| 977 | ii) Sieve G.I. Frame60cm dia. With sieve sizes of 80,75,63,53,50,45,40,37.5,31.5,26.5,25,22. 4,20,19,16,14,13.2,12.5,11.2,10,9.5,8.6,8,6 .7,6.3,6, 5.0,4.75 |
| 978 | iii) Pan and cover for60mm and 30mm dia, Sieves |
| 979 | iv) Adopter for both sieves |
| 980 | v) Sieve shaker, Motorized, with Built-in Digital Timer having power: 250/300 W (250W at 220V, 60Hz) and dimensions (approx.). 548X787X850mm |
| 981 | Determination of aggregate crushing value |
| 982 | Aggregate Crushing value Test Apparatus |
| 983 | i)15cm dia. Cylinder with plunger and base plateii) Cylindrical measure, 115mm ID X 180mm Hiii) Tamping Rod, Steel, 16mm dia. |
| 984 | Determination of aggregate Impact value |
| 985 | Aggregate impact value test Apparatus |
| 986 | Impact testing Machine, Measuring Cylinder, 75mm ID X 50mm H |
| 987 | Los Angeles Abrasion Test |
| 988 | Los Angeles Abrasion testing machine with counter |
| 989 | Los Angeles Abrasion testing machine consists of a hollow cylinder of dimensions approx. 975X785X937mm, 12 hardened steel balls of 48 mm dia And digital controller box and weight 350kg. |
| 990 | Flakiness and Elongation Test of Aggregate |
| 991 | i) Length Gauge |
| 992 | i) Constructed from steel mounted on a hardwood base with ISI certification mark |
| 993 | ii) Thickness Gauge |
| 994 | ii) Constructed from heavy gauge sheet steel with ISI certification mark. |
| 995 | Determination of Soundness of Aggregate |
| 996 | Equipment for Aggregate Soundness determination |
| 997 | Sieves of standard size and small Containers Rest included in General Equipment |
| 998 | Weighing Balance (20 Kg Capacity LC-2gms) |
| 999 | Weighing Balance (100 Kg Capacity LC-10gms) |
| 1000 | Testing of Cement / Concrete |
| 1001 | Determination of fineness of Cement by Blain\"s air permeability method |
| 1002 | Air permeability Apparatus (Blaine Type) |
| 1003 | It consists of a stainless steel cell, perforated disc and plunger. A U-tube glass manometer is fit to the steel stand |
| 1004 | Determine the consistency of Cement |
| 1005 | Equipment for consistency of Cement determination |
| 1006 | Vicat mould split type with clamping ring, Glass base plate, initial and final needle, consistency plunger, mild steel base plate and vicat mould split type with clamping |
| 1007 | Determination of Heat of Hydration test |
| 1008 | Heat of hydration Apparatus |
| 1009 | Calorie Metre with Containers, Spatula |
| 1010 | Soundness test of Cement |
| 1011 | Soundness test Apparatus |
| 1012 | i) Le-Chatelier mould, with ISI Certification Mark IS:5514 (2 Nos.)ii) Water Bath to maintain 270c (Included in the others) (1 No.)iii) Balances up to 1000g (1 No.) |
| 1013 | Workability of concrete by slump cone test |
| 1014 | Slump Cone Test Apparatus |
| 1015 | The Mould having 20mm bottom dia. 10mm top dia. and 30mm height, rod and base plate |
| 1016 | Workability of Concrete by compaction factor test |
| 1017 | Compaction factor Test Apparatus |
| 1018 | Compaction factor apparatus like Tamping rod of 16mm diameter and 60cm long Hoper |
| 1019 | Determine the Compressive strength of cement |
| 1020 | Equipment for Compressive Strength of Cement determination |
| 1021 | i)Vibration machine specified speed of 1000KN vibrations per min. |
| 1022 | ii) Vicat Apparatus with ISI Certification Mark, IS: 5513 |
| 1023 | iii) Balances up to 1000g, Gauging trowel conforming to IS: 10086 |
| 1024 | iv) 2000kN Compression Testing Machine, Electrically operated with three load gauges 2000kN,1000kN,500kN |
| 1025 | Schmidt\"s Rebound hammer test |
| 1026 | Rebound Hammer |
| 1027 | Capable of measuring elastic properties of hardened concrete. Should be able to applying impact energy up to 2.027Nm. |
| 1028 | Determination of Initial and Final setting time |
| 1029 | Equipment for initial and final setting time determination |
| 1030 | Vicat mould split type with damping ring, Stop watch graduated 0-60 seconds X 0.2 seconds |
| 1031 | Concrete compression and Flexural Strength test |
| 1032 | Equipment for compression and Flexural strength determination |
| 1033 | i)Compression Testing Machine 100kN Electrically operated including Flexural Strength Testing Facility for normal and Accelerated curing |
| 1034 | ii) Mould, Cast Iron for 150mm Cube with ISI Certification Mark |
| 1035 | iii) Mould, Cast Iron for 100mm Cube with ISI Certification Mark |
| 1036 | iv) Mould, Cast Iron for 100mm Beam with ISI Certification Mark |
| 1037 | Humidity Chamber for Cement Test |
| 1038 | Curing tank temprature controller (Heating & Cooling) |
| 1039 | Mini concrete Mixture for Lab. |
| 1040 | UPV (Ultra Sonic Pulse Velocity) for NDT Test |
| 1041 | Anvil Apparatus for calibaration of Rebound Hammer |
| 1042 | Acclerated Curing Tank |
| 1043 | Testing on Bitumen |
| 1044 | Sampling of Bitumen |
| 1045 | Equipment for Bitumen Sampling |
| 1046 | Bitumen sampler and sampling Tube Metal 1 Litre Capacity |
| 1047 | Determination of Penetration value |
| 1048 | Bitumen penetration kit |
| 1049 | i) Cast Iron Base with levelling screws, digital penetration measurement gauge 0.01mm precision, release button, automatic zeroing |
| 1050 | ii) Bitumen penetration kit like cylindrical glasses having 70mm diameter 40mm internal depth for the penetration 225 to 350 |
| 1051 | Determination of softening point |
| 1052 | Ring and Ball Apparatus |
| 1053 | Two steel balls, two brass ring depth 6.4±0.1 mm inside dia. @ bottom 15.9+0.1 mm inside dia. @ top 17.5±0.1mm outside diameter 20,6±0.1mm and thermometer |
| 1054 | Determination of Viscosity of Bitumen |
| 1055 | Say bolt Viscometer |
| 1056 | Two tubes include bath, Furol and Universal orifice, key, control box, stirring device, cooling coil, 60ml flask and digital thermo regulator |
| 1057 | Determination Ductility of Bitumen |
| 1058 | Ductility Testing Machine |
| 1059 | Ductility Testing Machine with Digital temp Indicator and rate of travel 5cm/min and 1cm/min |
| 1060 | Determination of Flash Point and Fire Point |
| 1061 | Flash Point (open)and Fire Point Test Apparatus |
| 1062 | Hot Plate, 160mm dia. |
| 1063 | Determination of Specific Gravity of Bitumen |
| 1064 | Specific Gravity test Apparatus |
| 1065 | Specific Gravity Bottle 50ml capacity normal type with narrow mouth with 6mm diameter for Bitumen |
| 1066 | Water Content of Bitumen |
| 1067 | Water Content Test Apparatus |
| 1068 | 500ml Flask Condenser made of heat resistant glass, shapes and dimensions as per code. Receiver made of heat resistant glass, shapes and dimensions as per code |
| 1069 | Binder Extractor |
| 1070 | Centrifuge Extractor |
| 1071 | Capacity 1.5kg - Electrically operated, speed 0 rpm to 3600rpm. |
| 1072 | Determine the Stripping Value |
| 1073 | Stripping Value Test Apparatus |
| 1074 | Beakers, 100ml Capacity |
| 1075 | Measuring the Temperature |
| 1076 | Digital Thermometer |
| 1077 | Digital Thermometer - range 500c-2800C |
| 1078 | Determine the Marshal Stability |
| 1079 | Marshal Stability Apparatus |
| 1080 | Marshal Stability Apparatus |
| 1081 | Testing on Steel |
| 1082 | Universal Testing Machine |
| 1083 | PROPOSED LABORATORY EQUIPMENTS REQUIRED FOR QUALITY CONTROL DIVISION BOLANGIR (TO BE HANDED OVER TO THE E.E QUALITY CONTROL DIVISION BOLANGIR/ HIS AUTHORISED PERSON) |
| 1084 | Grain Size Analysis |
| 1085 | Equipment for Grain Size Analysis |
| 1086 | i)Sieves of brass frame 20CM dia. with sizes10mm,5.6mm,4.75,4,3.35,2.8,2.36,2.1.7,1.6,1.4,1.18,1.0,0.85,0.71,0.6,0.5,0.425,0.355,0.3,0.25,0.212,0.18,0.16,0.15,0.125,0.106,0.09,0.08,0.075,0.63,0.53,0.45,0.38 |
| 1087 | ii)Pan & Cover for 20CM dia. sieves |
| 1088 | iii) Motorised Sieve shaker with Built-in Digital Timer Power: 250/300W (250 W at 220V, 60Hz) and Dimension (approx): 548X787X850mm Detailed Specification as per IS: 2720 Part- |
| 1089 | Determination of Water Content |
| 1090 | Equipment for Water Content Determination |
| 1091 | Equipment for determination for water content comprises containers, balance, oven and desiccator {already included as part of other equipment elsewhere) Detailed specification as per IS: 2720 Part- |
| 1092 | Determination of swelling index |
| 1093 | i)Swell pressure Test Apparatus |
| 1094 | Load frame of Capacity 5kN. (hand operated), mould 100mm dia. X 127.3 mm height with base plate & collar, proving Ring of Capacity 2.5kN, Dial Gauge 25mm travel with 0.01 mm least count, perforated swell plate of 100mm dia. X 16mm thick, Spacer 100mm dia.X12.7mm thick, pair of porous stones of 100mm dia. X 12.7mm thick, load transfer ball-steel ball and soaking tank of 250mm dia. X 210mm high detailed Specification as per IS: 2720 Part-XLI |
| 1095 | ii) Free swell index |
| 1096 | 425 micron IS sieve and 2 glass graduated cylinders of 100ml capacity. Detailed specifications as per IS: 2720 Part-XL |
| 1097 | Laboratory determination of CBR |
| 1098 | Laboratory CBR Test Apparatus |
| 1099 | i) Load frame of 50kN capacity |
| 1100 | ii) Mild Steel, Zinc plated Mould, 150mm ID X 175mm |
| 1101 | iii) Mild Steel, Zinc plated perforated Base Plate |
| 1102 | iv) Mid Steel Zinc plated Extension Collar 150mm ID X 50mm high |
| 1103 | v) Space Disc of 148mm dia. And 47.7 mm thickness |
| 1104 | vi) Metal weight 2.5 Kg, 147mm dia. With 53.3mm dia. Central hole |
| 1105 | vii) Perforated Plate, 148mm dia. With adjustable stem and lock nut |
| 1106 | Determination of optimum Moisture Content (OMC) by Light Compaction Test |
| 1107 | Light Compaction Proctor Test apparatus |
| 1108 | i).Compaction mould made of mild steel having 100mm dia. X 127.3 mm height and 1000ml volume |
| 1109 | ii) Rammer 2.6 Kg X 310 mm Fall |
| 1110 | Determination of Optimum Moisture Content (OMC) by Heavy Compaction |
| 1111 | Heavy Compaction Proctor Test Apparatus |
| 1112 | i) Compaction mould made of mild steel having 150mm dia. 127.3mm height 2305 ml volume |
| 1113 | ii) Rammer 4.9Kg X 450mm fall |
| 1114 | Determination of Liquid Limit |
| 1115 | Liquid Limit Device Set |
| 1116 | i) Casgrande Liquid Limit device hand operated, grooving tool, Gauge Block and Moisture Containers. |
| 1117 | ii) Casgrande Liquid Limit Device motorised suitable for operation of 220V, 50Hz, single phase AC supply, with casgrande grooving tools |
| 1118 | Determination of Liquid Limit by cone penetration method |
| 1119 | Soil Cone, Penetrometer, Digital Type |
| 1120 | Comprises stainless steel penetration cone 35mm long with smooth polished surface with an angel of 300C and penetration test cup of 55mm dia. X 40mm deep and it is suitable from operation on 220V, 50Hz, single phase AC supply |
| 1121 | Determination of Plastic Limit |
| 1122 | Equipment for Plastic Limit determination |
| 1123 | Ground Glass plate 20X15 CM, Rod, 3mm dia. And 10cm long, spatuala, 100mm blade with wooden handle, moisture tin size 90mm X 20mm deep and porcelain Dish 50ml Capacity |
| 1124 | Determination of Shrinkage Limit |
| 1125 | Shrinkage Limit Set |
| 1126 | i) Porcelain Evaporating Dish of 50ml capacity, Shrinkage Dish of 45mm dia. And 15mm height, Glass cup 50 to 60mm ID and 25mm H, Perspex Plate with three metal prongs of 75 mm X 75mm, Graduated jar of 25 ml sensitive 0.5ml, Mercury 750g and general items like spatula and straight edge. |
| 1127 | Determination of PH Value |
| 1128 | PH Metre |
| 1129 | Should be able to indicate PH from 1 to 14 |
| 1130 | Determination of specific gravity |
| 1131 | Equipment for specific gravity determination |
| 1132 | i)Pycnometer, 50ml Capacity |
| 1133 | ii) Vacuum desiccators, size 200mm to 250mm in dia. |
| 1134 | Determination of shear strength |
| 1135 | Direct shear test apparatus |
| 1136 | Shear box, Assembly comprise two halves, plane gripper plate, perforated gripper plate, porous stone, loading pad, base plate, Loading frame with direct and through lever systems for applying normal load up to 3kg/sq.cm. capacity, proving ring of 2kNcapacity and dial gauge of 25mm travel with 0.01 mm least count and Specimen cutter |
| 1137 | Triaxial Shear Apparatus |
| 1138 | Weighing Balance (5 Kg Capacity LC-0.5gms) |
| 1139 | Determination of Unconfined Compressive Strength (UCS) of Soil |
| 1140 | UCS test Apparatus |
| 1141 | Compression Testing Machine of 1000kg capacity of standard rate of Loading |
| 1142 | Standard Penetration Test |
| 1143 | Standard Penetration Test Set |
| 1144 | Standard penetration test set consisting of split spoon sampler, drive weight, guide pipe assembly, tripod with rope 19mm dia. X 10mt length |
| 1145 | Testing on Aggregates |
| 1146 | Determination of Specific gravity and water absorption |
| 1147 | Equipment for Specific gravity Determination |
| 1148 | Wire basket having 20cm dia. X 20cm high with not more than 6.3mm mesh, container 20cm dia. X20 high, Shallow tray 650X500X50mm |
| 1149 | Sieve Analysis of aggregate |
| 1150 | Equipment for Sieve Analysis of aggregate |
| 1151 | i) Sieve G.I. Frame 60cm dia With sieve sizes of 25mm,106,100,90.80,75,63,53,50,45,40,37 .5,31.5,26.5,25,22.4.20,19,16,14,13.2,12.5,11 .2, 10,9.5,8.6,8,6.7,6 3,6,5.0,4.75 |
| 1152 | ii) Sieve G.I. Frame60cm dia. With sieve sizes of 80,75,63,53,50,45,40,37.5,31.5,26.5,25,22. 4,20,19,16,14,13.2,12.5,11.2,10,9.5,8.6,8,6 .7,6.3,6, 5.0,4.75 |
| 1153 | iii) Pan and cover for60mm and 30mm dia, Sieves |
| 1154 | iv) Adopter for both sieves |
| 1155 | v) Sieve shaker, Motorized, with Built-in Digital Timer having power: 250/300 W (250W at 220V, 60Hz) and dimensions (approx.). 548X787X850mm |
| 1156 | Determination of aggregate crushing value |
| 1157 | Aggregate Crushing value Test Apparatus |
| 1158 | i)15cm dia. Cylinder with plunger and base plateii) Cylindrical measure, 115mm ID X 180mm Hiii) Tamping Rod, Steel, 16mm dia. |
| 1159 | Determination of aggregate Impact value |
| 1160 | Aggregate impact value test Apparatus |
| 1161 | Impact testing Machine, Measuring Cylinder, 75mm ID X 50mm H |
| 1162 | Los Angeles Abrasion Test |
| 1163 | Los Angeles Abrasion testing machine with counter |
| 1164 | Los Angeles Abrasion testing machine consists of a hollow cylinder of dimensions approx. 975X785X937mm, 12 hardened steel balls of 48 mm dia And digital controller box and weight 350kg. |
| 1165 | Flakiness and Elongation Test of Aggregate |
| 1166 | i) Length Gauge |
| 1167 | i) Constructed from steel mounted on a hardwood base with ISI certification mark |
| 1168 | ii) Thickness Gauge |
| 1169 | ii) Constructed from heavy gauge sheet steel with ISI certification mark. |
| 1170 | Determination of Soundness of Aggregate |
| 1171 | Equipment for Aggregate Soundness determination |
| 1172 | Sieves of standard size and small Containers Rest included in General Equipment |
| 1173 | Weighing Balance (20 Kg Capacity LC-2gms) |
| 1174 | Weighing Balance (100 Kg Capacity LC-10gms) |
| 1175 | Testing of Cement / Concrete |
| 1176 | Determination of fineness of Cement by Blain\"s air permeability method |
| 1177 | Air permeability Apparatus (Blaine Type) |
| 1178 | It consists of a stainless steel cell, perforated disc and plunger. A U-tube glass manometer is fit to the steel stand |
| 1179 | Determine the consistency of Cement |
| 1180 | Equipment for consistency of Cement determination |
| 1181 | Vicat mould split type with clamping ring, Glass base plate, initial and final needle, consistency plunger, mild steel base plate and vicat mould split type with clamping |
| 1182 | Determination of Heat of Hydration test |
| 1183 | Heat of hydration Apparatus |
| 1184 | Calorie Metre with Containers, Spatula |
| 1185 | Soundness test of Cement |
| 1186 | Soundness test Apparatus |
| 1187 | i) Le-Chatelier mould, with ISI Certification Mark IS:5514 (2 Nos.)ii) Water Bath to maintain 270c (Included in the others) (1 No.)iii) Balances up to 1000g (1 No.) |
| 1188 | Workability of concrete by slump cone test |
| 1189 | Slump Cone Test Apparatus |
| 1190 | The Mould having 20mm bottom dia. 10mm top dia. and 30mm height, rod and base plate |
| 1191 | Workability of Concrete by compaction factor test |
| 1192 | Compaction factor Test Apparatus |
| 1193 | Compaction factor apparatus like Tamping rod of 16mm diameter and 60cm long Hoper |
| 1194 | Determine the Compressive strength of cement |
| 1195 | Equipment for Compressive Strength of Cement determination |
| 1196 | i)Vibration machine specified speed of 1000KN vibrations per min. |
| 1197 | ii) Vicat Apparatus with ISI Certification Mark, IS: 5513 |
| 1198 | iii) Balances up to 1000g, Gauging trowel conforming to IS: 10086 |
| 1199 | iv) 2000kN Compression Testing Machine, Electrically operated with three load gauges 2000kN,1000kN,500kN |
| 1200 | Schmidt\"s Rebound hammer test |
| 1201 | Rebound Hammer |
| 1202 | Capable of measuring elastic properties of hardened concrete. Should be able to applying impact energy up to 2.027Nm. |
| 1203 | Determination of Initial and Final setting time |
| 1204 | Equipment for initial and final setting time determination |
| 1205 | Vicat mould split type with damping ring, Stop watch graduated 0-60 seconds X 0.2 seconds |
| 1206 | Concrete compression and Flexural Strength test |
| 1207 | Equipment for compression and Flexural strength determination |
| 1208 | i)Compression Testing Machine 100kN Electrically operated including Flexural Strength Testing Facility for normal and Accelerated curing |
| 1209 | ii) Mould, Cast Iron for 150mm Cube with ISI Certification Mark |
| 1210 | iii) Mould, Cast Iron for 100mm Cube with ISI Certification Mark |
| 1211 | iv) Mould, Cast Iron for 100mm Beam with ISI Certification Mark |
| 1212 | Humidity Chamber for Cement Test |
| 1213 | Curing tank temprature controller (Heating & Cooling) |
| 1214 | Mini concrete Mixture for Lab. |
| 1215 | UPV (Ultra Sonic Pulse Velocity) for NDT Test |
| 1216 | Anvil Apparatus for calibaration of Rebound Hammer |
| 1217 | Acclerated Curing Tank |
| 1218 | Testing on Bitumen |
| 1219 | Sampling of Bitumen |
| 1220 | Equipment for Bitumen Sampling |
| 1221 | Bitumen sampler and sampling Tube Metal 1 Litre Capacity |
| 1222 | Determination of Penetration value |
| 1223 | Bitumen penetration kit |
| 1224 | i) Cast Iron Base with levelling screws, digital penetration measurement gauge 0.01mm precision, release button, automatic zeroing |
| 1225 | ii) Bitumen penetration kit like cylindrical glasses having 70mm diameter 40mm internal depth for the penetration 225 to 350 |
| 1226 | Determination of softening point |
| 1227 | Ring and Ball Apparatus |
| 1228 | Two steel balls, two brass ring depth 6.4±0.1 mm inside dia. @ bottom 15.9+0.1 mm inside dia. @ top 17.5±0.1mm outside diameter 20,6±0.1mm and thermometer |
| 1229 | Determination of Viscosity of Bitumen |
| 1230 | Say bolt Viscometer |
| 1231 | Two tubes include bath, Furol and Universal orifice, key, control box, stirring device, cooling coil, 60ml flask and digital thermo regulator |
| 1232 | Determination Ductility of Bitumen |
| 1233 | Ductility Testing Machine |
| 1234 | Ductility Testing Machine with Digital temp Indicator and rate of travel 5cm/min and 1cm/min |
| 1235 | Determination of Flash Point and Fire Point |
| 1236 | Flash Point (open)and Fire Point Test Apparatus |
| 1237 | Hot Plate, 160mm dia. |
| 1238 | Determination of Specific Gravity of Bitumen |
| 1239 | Specific Gravity test Apparatus |
| 1240 | Specific Gravity Bottle 50ml capacity normal type with narrow mouth with 6mm diameter for Bitumen |
| 1241 | Water Content of Bitumen |
| 1242 | Water Content Test Apparatus |
| 1243 | 500ml Flask Condenser made of heat resistant glass, shapes and dimensions as per code. Receiver made of heat resistant glass, shapes and dimensions as per code |
| 1244 | Binder Extractor |
| 1245 | Centrifuge Extractor |
| 1246 | Capacity 1.5kg - Electrically operated, speed 0 rpm to 3600rpm. |
| 1247 | Determine the Stripping Value |
| 1248 | Stripping Value Test Apparatus |
| 1249 | Beakers, 100ml Capacity |
| 1250 | Measuring the Temperature |
| 1251 | Digital Thermometer |
| 1252 | Digital Thermometer - range 500c-2800C |
| 1253 | Determine the Marshal Stability |
| 1254 | Marshal Stability Apparatus |
| 1255 | Marshal Stability Apparatus |
| 1256 | Testing on Steel |
| 1257 | Universal Testing Machine |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
