Public Administrative Department Local Bodies Closing in 0 days TDR #28772741

Construction Of Reception Room In Police Station, Phalodi Construction Of

Issued by Local Bodies · PHALODI, Rajasthan
Tender Value
7.16 Lakhs
Estimated cost
Bid Submission
17 Aug 2021
0 days left
EMD
14320
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
PHALODI → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Construction Of Reception Room In Police Station, Phalodi Construction Of

BOQ

Name of Work:CONSTRUCTION OF RECEPTION ROOM IN POLICE STATION, PHALODI
Sl. No. Item Description
1Earth work in excavation in foundation, trenches etc. including dressing of sides and ramming of bottoms, including getting out the excavated material, refilling after laying pipe/ foundation and disposal of surplus excavated material at a lead upto 50m suitable site as per direction of Engineer for following depths, below natural ground / Road top level.In all types soils/ saturated soil such as moorum, sand, sandy silt, clay, black cotton soil, kankar, etc. Depth upto 1.5 m
2Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level :1:4:8 (1 Cement : 4 fine/ coarse sand : 8 graded stone aggregate 40 mm nominal size).
3Centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for :Suspended floors, roofs, landings, balconies and access platform.
4Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level :1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
5Random rubble masonry with hard stone in foundation and plinth : Cement mortar 1:6 (1 cement : 6 coarse sand)
6Centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers.
7Providing and laying in position specified grade of reinforced cementconcrete excluding the cost of centring, shuttering, finishing andreinforcement - All work upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size)
8Reinforcement for R.C.C work all level including traightening, cutting, bending, placing in position and binding all complete .thermo-mechanically treated bars.
9Random rubble stone masonary with hard stone in foundation and plinth: cement morter 1:6 (1 cement:6 coarse sand) extra for random rubble masonary with hard stone in superstructure above two stories for every two stories for every two stories or part there of
10Brick work with FPS bricks of class designation 75 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)
11Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded 20mm nominal size stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete.40mm thick
12Providing and fixing factory made ISI marked steel glazed doors,windows and ventilators side /top /centre hung with beading and allmembers such as F7D, F4B, K11 B and K12 B etc. complete ofstandard rolled steel sections, joints mitred and flash butt weldedand sash bars tenoned and rivetted with 15x3mm lugs, 10cm long,embedded in cement concrete blocks 15x10x10cm of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominalsize) or with wooden plugs and screws or rawl plugs and screws orwith fixing clips or with bolts and nuts as required, includingproviding and fixing of hinges, pivots, float glass panes with glazingclips and special metal sash putty of approved make and a primingcoat of approved steel primer excluding the cost of metal beadingand other fittings except necessary hinges or pivots complete as perapproved design.
13Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides including approved ISI marked Stainless Steel butt hinges fittings with necessary screws complete as per annexure \"A\" :30 mm thick Decorative teak veneer both side
14Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) : Raised and cut pointing
15Cement plastering including T&P, scaffolding, material and complete labpour, including cost of water, curing, racking of joints etc. with 20 mm cement plaster of mix :1:6 (1 cement : 6 fine/ coarse sand)
16Distempering with oil bound washable distemper of approved brand and manufacture to give an even shadeNew work (two or more coats) over and including priming coat with cement primer.
17Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work
18Extra for coursed rubble masonry with hard stone (first or second sort) in superstructure above two stories for every two stories or part thereof.
19Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4).
20Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar).
21Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal designcomplete including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid.
22Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar taps.
23Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work - Exposed on wall S34.10.1 15 mm dia. nominal bore
24Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work - Exposed on wall 25 mm dia. nominal bore
25Providing and fixing on wall face Unplasticised Rigid PVC Single socketed pipes rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 75mm diameter
26110 mm diameter
27Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
28Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore.
29Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore
30Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.15 mm nominal bore.
31Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.
32Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
33Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With bricks
34Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps.
35P & F 1.6 mm thick M.S. Recessed fan box, hexagonal/ round of size 100 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side .
36Providing and fixing flexible 20 mm dia PVC conduit 2 MM thickincluding all necessary supports, clamps, jointing pieces etc for dropof wire/cable from slab / wall.
37Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq.mm FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it\"s accessories, round tiles,18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board & false ceiling point. 6 A switch, 3.0 mm thick phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections, testing etc. as required.Short point (up to 3 mtr.)
38Medium point (up to 6 mtr.)
39Long point (up to 10 mtr..)
40Wiring of 3 pin 5 amp. light plug point with 1.5 sq. mm FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq.mm FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it\"s accessories, 18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board & false ceiling point, 6 A switch, 6 A socket, 3.0 mm thick phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections, testing etc. as required.On board (Group-1)
41P & F double ball bearing capacitor start ceiling fan of approved make complete with regulator and other accessories as required. (for estimation purpose only) 1200 mm sweep (Group-1)
42P & F industrial fluorescent tube fitting with reflector fabricated from CRCA sheet and finished with powder coating / vitreous enamelled complete with accessories like (OCCB, starter, starter seat)/ EB, condensor,rotor holder, terminal block duly prewired with copper conductor including making connection, testing etc. as required.With powder coated reflector( without tube) 2 X 36 Watts with OCCB (Group-1)
43P & F fluorscent tube fitting fabricated from prephosphated and powder coated CRCA steel channel with coloured ABS end caps complete with accessories like copper wound open construction (VPIT) ballaststarter,starter seat.rotor holder, terminal block duly prewired with copper conductor including making connection, testing etc. as required. ( without tube)1 X 36/40 Watts (Group-1)
44SITC of quick make and quick break 3 POLE current limiting MCCB having following current rating, short circuit breaking capacity at 440/415 V, 50 Hz; O/L & S/C settings and conforming to IS 13947-2 / IEC 60947-2 with front face and centralized adjustable, line load interchange ability, having positive isolation capacity, provision for UVR, shunt trip, earth fault trip, push (test) to trip, including making connections with lugs / spreaders etc as required with Thermal Magnetic release up to 100 Amp, 10 kA, fixed O/L and S/C setting.With Thermal Magnetic release
45P & F Fluorscent tube rod in existing fixtures as required.36/40 Watts (Group-1)

AI Tender Summary

OUR REF NO 28772741
AUTHORITY Local Bodies
TENDER VALUE 7.16 Lakhs
LAST DATE 17-08-2021
Authority
Authority Name Department Of Local Bodies
Work Description Construction Of Reception Room In Police Station, Phalodi Construction Of
Basic Detail
Tender No NPP/DEV/2021-22/2271
Bidding Type Tender
Location
City PHALODI
State Rajasthan
Key Dates
Publish Date 06 Aug 2021
Submission Date 17 Aug 2021
Open Date 18 Aug 2021
Finance
Tender Value 7.16 Lakhs
Tender Fee 500
EMD 14320
Exemption Not Available
Document List
3a7f133a-7eec-41af-85bc-44c15e8dd20f.html
BOQ_421370.xls
Tendernotice_1.pdf
tndrdoc.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Aug 06, 2021
11:30 IST

Tender Published

Tender notice published.

Completed
Aug 17, 2021
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Aug 18, 2021

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

3a7f133a-7eec-41af-85bc-44c15e8dd20f.html

xls

BOQ_421370.xls

pdf

Tendernotice_1.pdf

pdf

tndrdoc.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender