|
| 1 | Supplying anderectingrolledsteel joist(girder)pole100 x 116 mm (23 kg/m) with provided base plate in provided foundation as per specification no. OH-PL/RSJ CSR 20-21 Item no.8-1-12 |
| 2 | Supplying anderectingrolledsteel joist(girder)pole125 x 70 mm (13.3 kg/m)with provided base plate in provided foundation as per specification no. OH-PL/RSj CSR 20-21 Item no.8-1-13 |
| 3 | Supplyinganderecting pre-stressed cement concrete (PSC) rectangular pole of top 90 x 102 / 105 mm & bottom of 90 x 275mm 8 m long (140 kg) complete erected in provided C. C. foundation & muffing (square / round) as per specification no. OHPL/PSCCSR 20-21 Item no.8-2-1 |
| 4 | Supplying anderecting all aluminium stranded conductors 7/2.21mm complete. (Gnat) (73.77kg/km) as per specification no. OH-CON/AACCSR 20-21 Item no.8-5-2 |
| 5 | Supplying and erecting ACSR conductor of size 6/1-2.59 mm complete. (Weasel) (127.7 kg/km)as per specification no. OHCON/ACSRCSR 20-21 Item no.8-5-7 |
| 6 | Supplying anderecting all aluminium stranded conductors 7/3.10mm. complete. (Ant.) (145.0 kg/km)as per specification No. OH-CON/AACCSR 20-21 Item no.8-5-5 |
| 7 | Supplying and erecting 75x40x6 mm with 4.4 mm thick web and 7.3 mm thick flange channel (top pin) with clamp of suitable length so as to maintain vertical clearance of 1065 mm for 11 kV,1320 mm for 22 kV between insulators for erection of top pin insulators complete as per specification no. OH-PL/VCACSR 20-21 Item no.8-4-14 |
| 8 | Supplying and erecting bracket for guarding of HT OH Line, made from channel iron 1600 mm in length and 75x40x6 mm. erected on pole complete as per specification no. OH-PL/VCA CSR 20-21 Item no.8-4-15 |
| 9 | Supplying and erecting bracket for guarding of HT OH Line, made from channel iron 1600 mm in length and 65 x 65 x 6mm thick erected on pole as per specification no. OH-PL/VCACSR 20-21 Item no.8-4-16 |
| 10 | Supplying and erecting approved make 11 kV outdoor type gang operated air break, triple pole switch 200 A capacity with 3 post pin type insulator per phase, mounted in horizontal or vertical position with necessary channels on provided cross arm with adequate length of \"C\" class G.l. pipe for operating handle erected on extended square shaft. The operating handle provided with lock and key at suitable height from ground level with necessary clampCSR 20-21 Item no.10-2-1 |
| 11 | Supplying and erecting approved make, 11 kV outdoor type drop out fuse with insulator complete with fuse holders, fuse barrel with metal fitting, fuse element mounted on M.S. channel with working current of 15A capacity complete erected on provided cross arm. CSR 20-21 Item no.10-2-5 |
| 12 | Supplying and erecting distribution class, 11 kV thyrite type lightning arrester with nut bolts, on provided MS channel as per specification no. OH-INS/LA CSR 20-21 Item no.8-6-15 |
| 13 | Supplying & erecting inline D. P. structure for 11/0.415 kV, 63 kVA transformer with R.S.J. Pole 2 Nos. of size 100 x 116 mm x 11 m long with suitable distribution box of C.R.C.A. Sheet 16 SWG with 4 pole MCCB 100 amps as incomer & 6 nos. 63 amps kitkat/MCCB for outgoing circuits. Transformer D.P. Structure includes the A. B. Switch 200 amps, D.O. fuse set & L.A. set, 2 nos. of top channel of size 100 mmx 50 mm for erection of A.B. switch & 2 nos. base channel of size 100 mm x 50 mm for erecting transformer. channel of size 75 x 40 mm for erecting D.O. fuse set, L.A., A.B. switch handle etc. angle of size 50 x 50 x6 mm for erecting distribution box, transformer belt etc.as per drawing (min. 124 Kg. iron work) with necessary clamps, nut-bolts, vee cross arm, top clip, insulators etc. complete with caution board & barbed wire. D.P. structure shall be erected in c.c. foundation complete. CSR 20-21 Item no.8-4-18 |
| 14 | Supplying & erecting inline D. P. structure for 11/0.415 kV, 100 kVA transformer with R.S.J. pole 2 nos. of size 100 x 116 mm x 11 Mtr. long with suitable distribution box of C.R.C.A. sheet 16 SWG with 4 pole MCCB 200 amps as incomer & 6 nos. 100 amps kitkat/MCCB for outgoing circuits. Transformer D.P. structure includes the A. B. switch 200 amps, D.O. fuse set & L.A. set, 2 Nos. of top channel of size 100 mm x 50 mm for erection of A.B. switch & 2 nos. base channel of size 100 mm x 50 mm for erecting transformer channel of size 75 x 40 mm for erecting D.O. fuse set, L.A., A.B. switch handle etc. Angle of size 50 x 50 x6 mm for erecting distribution box, transformer belt etc.as per drawing (min. 124 Kg. iron work) with necessary clamps, nut-bolts, vee cross arm, top clip, insulators etc. complete with caution board & barbed wire. D.P. structure shall be erected in c.c. foundation complete.CSR 20-21 Item no.8-4-19 |
| 15 | Supplying & erecting inline D. P. structure for 11/0.415 kV, 200 kVA transformer with R.S.J. pole 2 nos. of size 100 x 116 mm x 11 Mtr. long with suitable distribution box of C.R.C.A. sheet 16 SWG with 4 pole MCCB 300 amps as incomer & 6 nos. 100 amps kitkat/MCCB for outgoing circuits. Transformer D.P. structure includes the A. B. switch 200 amps, D.O. fuse set & L.A. set, 2 nos. of top channel of size 100 mmx 50 mm for erection of A.B. switch & 2 nos. base channel of size 100 mm x 50 mm for erecting Transformer. channel of size 75 x 40 mm for erecting D.O. fuse set, L.A., A.B. switch handle etc. Angle of size 50 x 50 x6 mm for erecting distribution box, transformer belt etc.as per drawing (min. 124 Kg. iron work) with necessary clamps, nut-bolts, vee cross arm, top clip, insulators etc. complete with caution board & barbed wire. D.P. structure shall be erected in c.c. foundation complete.CSR 20-21 Item no.8-4-20 |
| 16 | Supplying and erecting vee cross arm with ISM channel of 75x40x6mm, for 11kV HTOH line with arrangement to fix insulator at 45mm from the end & horizontal distance between insulators 1220 mm bent at angle of 60 degree keeping base 305 mm and the total vertical height of V cross arm as 460mm, and fixed on pole with MS clamp of 80x10 mm, nut bolts,washers complete as per specification no. OH-PL/VCA CSR 20-21 Item no.8-4-12 |
| 17 | Supplying and erecting porcelain shackle type LT medium insulator 50 x 89 mm dia. with G.I. (Shackle) strips, nuts and bolts, complete. CSR 20-21 Item no. CSR 20-21 Item no.8-6-3 |
| 18 | Supplying and erecting G.I. stay set for poles, including loop insulators at inaccessible height complete with anchor plate 300 x 300 x 6 mm., straining screws, G.I. stay wire 7/10 SWG, G.l. stay rod 20 mm x 1.8 m length and pole clamps duly erected in provided cement concrete foundation.CSR 20-21 Item no.8-7-1 |
| 19 | Supplying and erecting porcelain disc type insulator with necessary hardware suitable for 11kV line, complete as per specification no. OH-INS/DI CSR 20-21 Item no.8-6-6 |
| 20 | Supplying and erecting porcelain pin type insulator with G.I. pin suitable for 11kV line, complete as per specification no. OHINS/PNCSR 20-21 Item no.8-6-9 |
| 21 | Supplying and erecting G.I. stay set for poles, including loop insulators at inaccessible height complete with anchor plate 300 x 300 x 6 mm., straining screws, G.I. stay wire 7/8 SWG, G.l. stay rod 20 mm x 1.8 m length and pole clamps duly erected in provided cement concrete foundation. CSR 20-21 Item no.8-7-2 |
| 22 | Supplying & erecting single pole cut point channel set of for 11 kV HT OH line, two channel of size 100 x 50 x 6 mm 1.6 m long having stud angle of size 50 x 50 x 6 mm 1.5 m long long with necessary clamps, nut bolts etc. complete. CSR 20-21 Item no.8-4-17 |
| 23 | Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with all materials as per specification no. EAEPCSR 20-21 Item no.9-1-4 |
| 24 | Supplying and erectingsteeltubular swaged pole 139.7 x 114.3 x 88.9 mm. dia with 4.5x3.65x3.25 mm thickness (4.5 + 1.75 + 1.75 m) length respectively and total 8 m long with pole cap, base plate in provided foundation.(weight 101 kg.) as per specification no. OH-PL/STPCSR 20-21 Item no.8-1-1 |
| 25 | Supplying anderectingsteel tubular swagedpole 165.1 x 139.7 x 114.3 mm.dia with4.5 x 4.5 x 3.65 mm thickness ( 5 + 2 + 2m ) length respectivelyandtotal9 m long with pole cap, base plate in provided foundation (weight 147 kg) as per specification no.OH-PL/STPCSR 20-21 Item no. 8-1-3 |
| 26 | Supplying and erecting steel tubular swaged pole 165.1 x 139.7 x 114.3 mm dia with 4.5 x 4.5 x 3.65 mm. thickness (5 + 2.5 + 2.5 m) length respectively and total 10 m long with pole cap, base plate in provided foundation (weight 160 kg) as per specification no. OH-PL/STPCSR 20-21 Item no.8-1-4 |
| 27 | Making cement concrete foundation including excavation(60x 60 x 150) cm deep in 1:3:6 cement concrete 20 x 25 mm stone metal, (45x 45x 45) cm /45 cm dia. x 45 cm height plinth duly plastered,with necessary curing and finishing complete. (above 6 m to 9 m poles)CSR 20-21 Item no.16-3-3 |
| 28 | Makingcement concrete foundation including excavation(60 x 60) cm x deep 1/6 of pole length in 1:3:6 cement concrete 20 x 25 mm stone metal,45 cm x 45 cm x 45 cm /45 cm dia. x 45 cm. height plinth duly plastered, with necessary curing and finishing complete. (for above 9 m poles) CSR 20-21 Item no.16-3-4 |
| 29 | Supplying, erecting & terminating XLPE armoured cable 2 core 4 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL CSR 20-21 Item no.7-1-4 |
| 30 | Supplying, erecting & terminating XLPE armoured cable 2 core 6 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL CSR 20-21 Item no.7-1-5 |
| 31 | Supplying, erecting & terminating XLPE armoured cable 2 core 10 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/ALCSR 20-21 Item no.7-1-6 |
| 32 | Supplying, erecting & terminating XLPE armoured cable 4 core 6 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/ALCSR 20-21 Item no.7-1-27 |
| 33 | Supplying, erecting & terminating XLPE armoured cable 4 core 10 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL CSR 20-21 Item no.7-1-28 |
| 34 | Supplying, erecting & terminating XPLE armoured cable 4 core 16 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL CSR 20-21 Item no.7-1-29 |
| 35 | Supplying, erecting & terminating XLPE armoured cable 4 core 35 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no.CB-LT/ALCSR 20-21 Item no.7-1-31 |
| 36 | Supplying, erecting & terminating XLPE armoured cable 3½ core 95 sq. mm. aluminium conductor with continuous 8.35 sq. mm. (10 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/ALCSR 20-21 Item no.7-1-19 |
| 37 | Supplying, erecting & terminating XLPE armoured cable 3½ core 120 sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL CSR 20-21 Item no.7-1-20 |
| 38 | Supplying, erecting & terminating XLPE armoured cable 3½ core 150 sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/ALCSR 20-21 Item no.7-1-21 |
| 39 | Supplying, erecting & terminating XLPE armoured cable 1100 V. 3½ core 185 sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL CSR 20-21 Item no.7-1-22 |
| 40 | Supplying and erecting Street light bracket for erection of Single fitting made from 40 mm. dia ‘B’ class G.I. pipe 1.0 m in length along with pole cap of 300 mm length 100 mm dia duly welded as per specification no. FG-BKT/BPCCSR 20-21 Item no.2-9-5 |
| 41 | Supplying and erecting Street light bracket for erection of Double fitting made from 40 mm. dia ‘B’ class G.I. pipe 1.0 m in length along with pole cap of 300 mm length 100 mm dia duly welded as per specification no. FG-BKT/BPC CSR 20-21 Item no.2-9-6 |
| 42 | Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth completeCSR 20-21 Item no.7-6-9 |
| 43 | Supplying & erecting G.I. pipe ‘A’ class 50 mm dia. erected for enclosing XLPE armoured cable on wall/pole as per specification no. CB-CECSR 20-21 Item no.7-6-3 |
| 44 | Supplying & erecting FRP box of size 250 x 200 x 100 mm, 2.7 mm thick complete on pole/wall as per specification no. CB-SB CSR 20-21 Item no.7-8-9 |
| 45 | Supplying, erecting & marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification no. SW-SWR/MCB CSR 20-21 Item no.5-3-3 |
| 46 | Supplying and erecting mains with ISI mark WP 2 x 4 sq. mm. 1100 V grade aluminium PVC insulated and PVC sheathed wires on G.I. bearer wire No. 8 SWG complete erected with required size of porcelain reel insulators and 16 SWG G.I. binding wire.CSR 20-21 Item no.1-4-2 |
| 47 | Supplying and erecting mains with ISI mark WP 2 x 6 sq. mm. 1100 V. grade aluminium PVC insulated and PVC sheathed wires on G.I. bearer wire No. 8 SWG complete erected with required size of porcelain reel insulators and 16 SWG G.I. binding wire. CSR 20-21 Item no.1-4-3 |
| 48 | Supplying & erecting crimping type copper lugs for cable up to 16 sq. mm. complete as per specification no. CB-CL/CUCSR 20-21 Item no.7-9-1 |
| 49 | Supplying & erecting crimping type copper lugs for cable 35 sq. mm. complete as per specification no. CB-CL/CU CSR 20-21 Item no.7-9-2 |
| 50 | Supplying & erecting crimping type copper lugs for cable 95 sq. mm. complete as per specification no. CB-CL/CUCSR 20-21 Item no.7-9-6 |
| 51 | Supplying & erecting crimping type copper lugs for cable 120 sq. mm. complete as per specification no. CB-CL/CU CSR 20-21 Item no.7-9-7 |
| 52 | Making cement concrete foundation including excavation(60x 60x 150) cm deep in 1:3:6 cement concrete, (20 to 25) mm stone metalwith necessary curing and finishing complete.(for stay).CSR 20-21Item no.16-3-6 |
| 53 | Supplying & erecting FRP box of size 150 x 125 x 100 mm, 2.7 mm thickcomplete on pole/wallas per specification no. CB-SBCSR 20-21 litem no.7-8-10 |
| 54 | Supplying & erecting crimping type aluminium lugs for cable up to 16 sq. mm. completeas per specification no. CB-CL/A CSR 20-21 litem no.7-10-1 |
| 55 | SupplyinganderectingISI mark G.I. pipepole ‘B’ grade80 mm dia 6 m longwith pole cap, base plate in provided foundation as per specification no. OH-PL/GIP csr 20-21 item no.8-1-16 |
| 56 | Providing and erecting galvanised 1000mm single arm sword type bracket with FRP domeand ball as per specification no. OH-PL/PBKT csr 20-21 item no.8-3-30 |
| 57 | Providing and erecting galvanised 1000mm double arm sword type bracket with FRP domeand ball as per specification no. OH-PL/PBKT csr 20-21 item no. 8-3-31 |
| 58 | Supplying & erectingMS pole bracket for guarding/LT OH Line, fabricated from angle iron 50x50x6 mm and 550 mm long for necessary nos. of provided insulators and erecting on pole with 50x6mm clampcomplete as per specification no. OH -PL/BKT csr 20-21 item no.8-4-1 |
| 59 | Supplying & erectingMS pole bracket for guarding/LT OH Line, fabricated from angle iron 50x50x6 mm and 1100mm long for necessary nos. of provided insulators and erecting on pole with 50x6mm clampcomplete as per specification no. OH -PL/BKT csr 20-21 item no.8-4-2 |
| 60 | SupplyinganderectingG.I.fly stay set for pole including straining screw, G.l. stay wire, 7/10 SWG (for to 15mtr. long) with pole clamp, made of 50 x 6 mm MS flat,completeerectedon provided RSJ pole. (Add. Rs. 25/- per m for extra length beyond 15 m)csr 20-21 item no. 8-7-3 |
| 61 | Supplyinganderecting G.l. self stay setforpole, includinganchorplate 300x 300 x 6mm.strainingscrew, loop-insulator, G.I. stay wire 7/10 SWG, G.I. stay rod 20 mm x 1.8 m long, erected with poleclampsalong with angle iron bracket of 50 x 50 x 6 mm andonemeter longfixed to pole at suitable heightwith suitable MS clamps duly erectedin provided C.C. foundations.csr 20-21 item no. 8-7-4 |
| 62 | Supplying and erecting \"C\" type (half) clamps for polemadefrom50 x 6 mm flatfor fixing cross arms by means of 15 mm dia. bolts andnutspaintedwith one coat ofredoxideandtwocoats of aluminium paint. csr 20-21 item no. 8-7-13 |
| 63 | Supplying and erectingaluminium strip of required sizes used for earthing on wall and/or any other purpose with necessaryaluminiumclampsfixed on wall painted with bituminous paint in an approved manner with joints required. As per specification no EA-EP. csr 20-21 item no. 9-2-1 |
| 64 | Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessarycopperclampsfixed on wall painted with bituminous paint in an approved manner with joints required. As per specification no. EA-EP.csr 20-21 item no.9-2-2 |
| 65 | Supplying and erecting Annealed bare copper wireof high purity of different sizesused forearthing onwall with necessarycopperclampsfixedon wall/cable/conduitwithscrews in an approved manner.Csr 20-21 item no.9-2-4 |
| 66 | Supplying and erecting GI earth wire of high purity of different sizes used for earthing or any other purposes on wall with necessary G. I. Clamps fixed on wall/cable/ conduit with screws in an approved manner.Csr 20-21 item no.9-2-5 |
| 67 | Making cement concrete foundation including excavation ( 45x 45x 120 ) cm deep in 1:3:6 cement concrete, 20 to 25 mm stone metal, (45x 45x 45) cm / 45 cm dia. x 45 cm height plinth duly plastered,with necessary curing and finishing complete. (for 6 m pole) csr 20-21 item no.16-3-2 |
| 68 | Making cement concretefoundationin 1:3:6 cement concrete,(20 to 25) mm. stone metal duly plastered with necessary curing forcomplete. (pole muffing or any other purpose). Csr 20-21 item no.16-3-7 |
| 69 | Painting of steel tubular / rail / RSJ pole above 6.0 m length along with street light pole brackets, clamps etc by scrapping the existing paint complete. Specification no CW -PTG/PTP.csr 20-21 item no.16-4-3 |
| 70 | Supplying and erecting 9m (clear height) fixed type High Mast (Top-100mm, Bottom- 200mm) with hexagonal/round bracket and foundation bolts suitable for max. 4 nos floodlight fixtures on provided foundation as per specification no. OH-PL/OPL (excluding luminaries).csr 20-21 item no.8-3-8 |
| 71 | Providing earthing with copper earth plate size 30 x 30 x 0.315 cm complete with all materials, testing & recording the results asper specification no. EA-EP csr 20-21 item no. 9-1-2 |
| 72 | Supplying & erecting crimping type copper lugs for cable 185 sq. mm. complete as per specification no. CB-CL/CUCSR 20-21 Item no.7-9-9 |
| 73 | MakingM- 20 grade reinforced cement concretefoundation byconsidering the safe soil bearing capacity at site as 10 T/sq.mat 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 9m & 10m high octagonal /conical GI pole).csr 20-21 item no.16-3-10 |
| 74 | Supplying and erecting guarding loop usingG.l. wire no.8 SWGfor L.T. overhead line of horizontal formation completeerectedwith20 SWG GI wireasbindingwireand50mm. section on each side, complete.csr 20-21 item no.8-7- 8 |
| 75 | Dismantling the existing overhead line including G.I. wires of all sizes withoutdamaging & makingthecoilsinsuitablesizes. Csr 20-21 item no.8-8-3 |
| 76 | Dismantling existing pole mounted distribution transformer safely without any damages.CSR 20-21 Item no.10-3-1 |
| 77 | Supplying and erecting fibre/ PVC spacers for LT overhead line 3 to 5 conductors complete erected.csr 20-21 item no.8-7-9 |
| 78 | Dismantling the existing pole above 6 m height with brackets, clamps, insulators, stay from the cement concrete foundation and making the site clear by refilling the pits with excavated materials and bringing it to the ground level.CSR 20-21 Item no.8-8-2 |
| 79 | Supplying and erecting PVC insulated PVC round sheathed 1.5 sq.mm (30 no. x 0.25 mm dia.) 3 core flexible multi strandedcopper Industrial cable for voltage grade up to 1.1 kV csr20-21 item no.1.3.27 |
