Public Health Engineering Department-PHED has published Fixing Of Rate Contract For Repairs / Replacement To Electrical Equipment Installed At Different Wsss Of Phe Mechanical Sub-Division Pampore ( District Pulwama ) -1 Providing, Fitting And Testing Of Copper Thimbles At Site 2 1. 10 Sq. M. Submission Date for this Tender is 26-08-2021. Wrenches and Drivers Tenders in Awantipora Jammu And Kashmir. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Providing, fitting and testing of Copper thimbles at site |
2 | 1. 10 Sq. mm |
3 | 2. 16 Sq. mm |
4 | 3. 25 Sq. mm |
5 | 4. 50 Sq. mm |
6 | 5. 90 Sq. mm |
7 | 6. 120 Sq. mm |
8 | 7. 150 Sq. mm |
9 | Providing, fitting and testing of Aluminum thimbles at site |
10 | 1. 10 Sq. mm |
11 | 2. 16 Sq. mm |
12 | 3. 25 Sq. mm |
13 | 4. 50 Sq. mm |
14 | 5. 90 Sq. mm |
15 | 6. 120 Sq. mm |
16 | 7. 150 Sq. mm |
17 | Providing, fitting of below mentioned item for repairs to 25KVA to 50 KVA Voltage Stabilizer including extraction of damaged items, transportation, loading, unloading, shifting back and then fitting and successful testing on no and full load at site. |
18 | Copper wire of specific gauge for fabrication of primary / secondary coil |
19 | Bush rod with porcelain insulator and packing |
20 | Rewinding/Re-taping /re-insulation of coils |
21 | T-Oil |
22 | Copper strip |
23 | Filtration / dehydration of T-oil |
24 | Cost of scrap copper dismattled windings |
25 | Cost of damaged lamination |
26 | Providing, fitting of below mentioned item for repairs to 50KVA -100 KVA Voltage Stabilizer including extraction of damaged items, transportation, loading, unloading, shifting back and then fitting and successful testing on no and full load at site. |
27 | Copper wire of specific gauge for fabrication of primary / secondary coil |
28 | Bush rod with porcelain insulator and packing |
29 | Rewinding/Re-taping /re-insulation of coils |
30 | T-Oil |
31 | Copper strip |
32 | Filtration / dehydration of T-oil |
33 | Cost of scrap copper dismattled windings |
34 | Cost of damaged lamination |
35 | Providing, fitting of below mentioned item for repairs to 100 KVA - below 150 KVA Voltage Stabilizer including extraction of damaged items, transportation, loading, unloading, shifting back and then fitting and successful testing on no and full load at site. |
36 | Copper wire of specific gauge for fabrication of primary / secondary coil |
37 | Bush rod with porcelain insulator and packing |
38 | Rewinding/Re-taping /re-insulation of coils |
39 | T-Oil |
40 | Copper strip |
41 | Filtration / dehydration of T-oil |
42 | Cost of scrap copper dismattled windings |
43 | Cost of damaged lamination |
44 | Providing, fitting of below mentioned item for repairs to 150 KVA Voltage Stabilizer including extraction of damaged items, transportation, loading, unloading, shifting back and then fitting and successful testing on no and full load at site. |
45 | Copper wire of specific gauge for fabrication of primary / secondary coil |
46 | Bush rod with porcelain insulator and packing |
47 | Rewinding/Re-taping /re-insulation of coils |
48 | T-Oil |
49 | Copper strip |
50 | Filtration / dehydration of T-oil |
51 | Cost of scrap copper dismattled windings |
52 | Cost of damaged lamination |
53 | Providing, fitting of below mentioned item for repairs to 200KVA Voltage Stabilizer including extraction of damaged items, transportation, loading, unloading, shifting back and then fitting and successful testing on no and full load at site. |
54 | Copper wire of specific gauge for fabrication of primary / secondary coil |
55 | Bush rod with porcelain insulator and packing |
56 | Rewinding/Re-taping /re-insulation of coils |
57 | T-Oil |
58 | Copper strip |
59 | Filtration / dehydration of T-oil |
60 | Cost of scrap copper dismattled windings |
61 | Cost of damaged lamination |
62 | Providing, fitting of below mentioned item for repairs to 250KVA Voltage Stabilizer including extraction of damaged items, transportation, loading, unloading, shifting back and then fitting and successful testing on no and full load at site. |
63 | Copper wire of specific gauge for fabrication of primary / secondary coil |
64 | Bush rod with porcelain insulator and packing |
65 | Rewinding/Re-taping /re-insulation of coils |
66 | T-Oil |
67 | Copper strip |
68 | Filtration / dehydration of T-oil |
69 | Cost of scrap copper dismattled windings |
70 | Cost of damaged lamination |
71 | Providing, fitting of below mentioned item for repairs to Voltage regulator (plate type switch) including extraction of damaged items, transportation, loading, unloading, shifting back and then fitting and successful testing on no and full load at site. |
72 | 1. 150mmx150mm |
73 | 2. 225mm x 225mm |
74 | 3. 200mm x 200mm |
75 | 4. 250mm x 250mm |
76 | 1. 300mmx300mm |
77 | 2. 350mm x 350mm |
78 | 3. 400mm x 400mm |
79 | 4. 450mm x 450mm |
80 | Providing, fitting of below mentioned item for repairs to Voltage regulator (drum type switch) including extraction of damaged items, transportation, loading, unloading, shifting back and then fitting and successful testing on no and full load at site. |
81 | 1. 32A |
82 | 2. 63A |
83 | 3. 100A |
84 | 4. 200A |
85 | Providing, fitting and testing of Voltmeters at site |
86 | Analog 0-200V |
87 | Analog 0-500V |
88 | Digital 0-500V |
89 | Providing, fitting and testing of Ammeters at site |
90 | 1. 0-50A with CT ratio of 5/50 Analog |
91 | 2. 0-100A with CT ratio of 5/100 Analog |
92 | 3. 0-150A with CT ratio of 5/150 Analog |
93 | 4. 0-200A with CT ratio of 5/200 Analog |
94 | 0-200A Digital |
95 | Providing, fitting and testing of post type drop out set including extraction of damaged ones, transportation, loading, unloading, fitting and successful testing on no and full load at site. |
96 | Suitable for 25KVA SS |
97 | Suitable for 63KVA SS |
98 | Suitable for 100KVA SS |
99 | Suitable for 250KVA SS |
100 | Suitable for 400KVA SS |
101 | Providing, fitting and testing of link set including extraction of damaged ones, transportation, loading, unloading, fitting and successful testing on no and full load at site. |
102 | Suitable for 25KVA SS |
103 | Suitable for 63KVA SS |
104 | Suitable for 100KVA SS |
105 | Suitable for 250KVA SS |
106 | Suitable for 400KVA SS |
107 | Providing, fitting and testing of submersible copper cables of below mentioned specifications including extraction of damaged ones, transportation, loading, unloading, fitting and successful testing on no and full load at site. |
108 | 1. 10 sq mm |
109 | 2. 16 sq mm |
110 | 3. 25 sq mm |
111 | 3. 35 sq mm |
112 | Providing, fitting and testing of copper cables of below mentioned specifications including extraction of damaged ones, transportation, loading, unloading, fitting and successful testing on no and full load at site. |
113 | 1. 19/0.0064 |
114 | 2. 37/0.083 |
115 | 3. 61/0.093 |
116 | 4. 19/0.044 |
117 | 7/16.00 |
118 | Providing, fitting and testing of 3.5 core XLPE aluminum conductor of below mentioned specifications including extraction of damaged ones, transportation, loading, unloading, fitting and successful testing on no and full load at site. |
119 | 1. 35 Sq. mm |
120 | 2. 50 Sq. mm |
121 | 3. 70 Sq. mm |
122 | 3. 95 Sq. mm |
123 | 4. 120 Sq. mm |
124 | 5. 185 Sq. mm |
125 | Providing, fitting and testing of 11KV post type lightening arrestor including extraction of damaged ones, transportation, loading, unloading, fitting and successful testing on no and full load at site. |
126 | Providing, fitting and testing of G.O.D set including extraction of damaged ones, transportation, loading, unloading, fitting and successful testing on no and full load at site. |
127 | Providing, fitting and testing of Cross arms including extraction of damaged ones, transportation, loading, unloading, fitting and successful testing on no and full load at site. |
128 | 1. Channels 75x40 AND Channels 100 x 50 |
129 | 2. Angle iron support |
130 | 3. F-top |
131 | 4. U Clamps |
132 | 5. Guy-wire with turn buckle |
133 | 6. Guy-Insulator |
134 | Providing, fitting and testing of ACSR Conductor including extraction of damaged ones, transportation, loading, unloading, fitting and successful testing on no and full load at site. |
135 | 1. 0.03 |
136 | 2. 0.05 |
137 | Providing, fitting and testing of MCCBs (04 Pole) including extraction of damaged ones, transportation, loading, unloading, fitting and successful testing on no and full load at site. |
138 | 63 Amps |
139 | 100 Amps |
140 | 125 Amps |
141 | 160 Amps |
142 | 200 Amps |
143 | 250 Amps |
144 | 320 Amps |
145 | 400 Amps |
146 | 630 Amps |
147 | Providing, fitting and testing of MCCBs (03 Pole) including extraction of damaged ones, transportation, loading, unloading, fitting and successful testing on no and full load at site. |
148 | 63amps |
149 | 100amps |
150 | 125amps |
151 | 160amps |
152 | 200Amps |
153 | Providing, fitting and testing of Change over switch including extraction of damaged ones, transportation, loading, unloading, fitting and successful testing on no and full load at site. |
154 | 63 A |
155 | 100 A |
156 | 200 A |
157 | 300 A |
158 | 400 A |
159 | 630 A |
160 | Providing, fitting and testing of Combined volt-ammeter for MU-G starters |
161 | 30A |
162 | 60A |
163 | 75A |
164 | 100A |
165 | 125A |
166 | Providing, fitting and testing of 415V Indicating lamps |
167 | Red/Yellow/Green |
168 | Providing, fitting and testing of 415V Single phase preventor |
169 | Providing, fitting and testing of ML contactors for starters |
170 | ML 1.5 |
171 | ML 2 |
172 | ML 3 |
173 | ML 4 |
174 | ML 6 |
175 | ML 10 |
176 | ML 12 |
177 | Providing, fitting and testing of Power contactors for FASD starters |
178 | LCIF 400 |
179 | LCIF 650 |
180 | LCIF 350 |
181 | CK 95 BE-300 |
182 | MNX 185 |
183 | MNX 325 |
184 | AC3-25A |
185 | AC3-32A |
186 | AC3-40A |
187 | AC3-50A |
188 | MC X 70 |
189 | AC3- 60A |
190 | AC3- 63A |
191 | AC3- 80A |
192 | AC3- 100A |
193 | AC3- 115A |
194 | AC3- 125A |
195 | AC3- 150A |
196 | AC3- 185A |
197 | AC3- 200A |
198 | Providing, fitting and testing of ML relays |
199 | ML1 range 4-6.5 |
200 | ML1 range 6-10 |
201 | ML1 range 10-16 |
202 | ML2/ML3 9-14 |
203 | ML2/ML3 13-21 |
204 | ML2/ML3 20-32 |
205 | ML2/ML3 28-42 |
206 | Providing, fitting and testing of FASD Panel accessories |
207 | Electronic timer 0- 30Sec |
208 | Electronic timer 0- 60Sec |
209 | Single Phase Preventer(Three phase type ) |
210 | Overload relay 4A-6A |
211 | Overload relay 5A-8A |
212 | Overload relay 6A-9A |
213 | Overload relay 7A-10A |
214 | Overload relay 9A-13A |
215 | Overload relay 12A-16A |
216 | Overload relay 14A-22A |
217 | Overload relay 17A-25A |
218 | Overload relay 23A-32A |
219 | Overload relay 30A-40A |
220 | Overload relay 37A-50A |
221 | Overload relay 48A-65A |
222 | Overload relay 55A-70A |
223 | Overload relay 63A-80A |
224 | Overload relay 80A-93A |
225 | Overload relay 85A- 105A |
226 | Overload relay 80A- 115A |
227 | Overload relay 125A- 200A |
228 | Overload relay 160A- 250A |
229 | Overload relay 200A- 315A |
230 | Replacement of damaged 1 Sq mm copper power wiring |
231 | Providing, fitting and testing of ATS star Delta starter |
232 | Pneumatic timer (on delay/off delay) |
233 | Electromagnetic power contactor assembly (10A-250A) |
234 | Providing, fitting and testing of Contact points for star/delta starters |
235 | 20HP |
236 | 30HP |
237 | 40HP |
238 | 50HP |
239 | Providing, fitting and testing of Terminal block |
240 | 30A-5 way |
241 | 60A-3way |
242 | 60A-6 way |
243 | 100A-3 way |
244 | 120A-3 way |
245 | Providing, fitting and testing of Power contactor for MU-G starters |
246 | MU-G10 |
247 | MU-G15 |
248 | MU-G20 |
249 | MU-G30 |
250 | MU-G40 |
251 | MU-G50 |
252 | MU-G75 |
253 | Providing, fitting and testing of Overload relay/under voltage relay/single phase preventer/Timer for MU-G starters |
254 | MU-G10 |
255 | MU-G15 |
256 | MU-G20 |
257 | MU-G30 |
258 | MU-G40 |
259 | MU-G50 |
260 | MU-G75 |
261 | Providing, fitting and testing of single phase preventer/Timer for MU-G starters |
262 | MU-G10 |
263 | MU-G15 |
264 | MU-G20 |
265 | MU-G30 |
266 | MU-G40 |
267 | MU-G50 |
268 | MU-G75 |
269 | Providing and fitting of Air Circuit breaker 800 amp Manual Draw out type |
270 | Providing and fitting of Multi-Function Meter Square Dial type |
271 | Providing, fitting and testing of Motor protection circuit breakers with thermal adjustable ranges from 0-100 amp |
272 | 0-32 Amp (16 steps) |
273 | 28-63 Amp (03 steps) |
274 | 55-100 Amp (03 steps) |
275 | Nuts and bolts of different size |
276 | Selector Switch |
277 | Providing, fitting of below mentioned item for repairs to 10KVA to 50KVA Servo Stabilizer including extraction of damaged items, transportation, loading, unloading, shifting back and then fitting and successful testing on no and full load at site. |
278 | Copper wire of specific gauge for fabrication of primary / secondary coil |
279 | Bush rod with porcelain insulator and packing |
280 | Rewinding/Re-taping /re-insulation of coils |
281 | T-Oil |
282 | Copper strip |
283 | Filtration / dehydration of T-oil |
284 | Cost of scrap copper dismattled windings |
285 | Replacement of digital micro controlled processor based control card |
286 | Replacement of AC syncronous servo motor |
287 | Replacement of copper wound motorized auto transformer |
288 | Replacement of buck and boost series transformer |
289 | Providing, fitting of below mentioned item for repairs to 50KVA to 100KVA Servo Stabilizer including extraction of damaged items, transportation, loading, unloading, shifting back and then fitting and successful testing on no and full load at site. |
290 | Copper wire of specific gauge for fabrication of primary / secondary coil |
291 | Bush rod with porcelain insulator and packing |
292 | Rewinding/Re-taping /re-insulation of coils |
293 | T-Oil |
294 | Copper strip |
295 | Filtration / dehydration of T-oil |
296 | Cost of scrap copper dismattled windings |
297 | Replacement of digital micro controlled processor based control card |
298 | Replacement of AC syncronous servo motor |
299 | Replacement of copper wound motorized auto transformer |
300 | Providing, fitting of Outdoor type LED Lamp |
301 | 25Watt |
302 | 45Watt |
303 | 48Watt |
304 | 50Watt |
305 | 60Watt |
306 | 90Watt |
307 | 100Watt |
308 | 120Watt |
309 | Repairs to LED lights at site by way of replacing strips |
310 | 25Watt |
311 | 45Watt |
312 | 48Watt |
313 | 50Watt |
314 | 60Watt |
315 | 90Watt |
316 | 100Watt |
317 | 120Watt |
318 | Erection of MS tubular 9m/11m tilted pole by way of excavation of new trench and concrete bottoming including fitting/fixing of Departmental ACSR conductor on the insulators |
319 | Repairs to VT Motor with rating above 50HP to 150HP) Dismantling of the VT motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items. |
320 | Copper wire used in rewinding the motor. |
321 | Rewinding,Skilled labor, insulated paper and sleeves used during rewinding and testing of motor at site. |
322 | Cost on account of associated/consumable items like crimpled paper, sleeves, PVC paper, bamboo sticks, thread, varnish etc |
323 | Cost of scrap copper dismanttled windings |
324 | Repairs to horizontal Motor with rating from 5HP to 50HP Dismantling of the horizontal motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items. |
325 | Copper wire used in rewinding the motor. |
326 | Rewinding,Skilled labor, insulated paper and sleeves used during rewinding and testing of motor at site. |
327 | Providing/fitting of connection platefor Horizontal motors from 05HP to 50 HP |
328 | Cost on account of associated/consumable items like crimpled paper, sleeves, PVC paper, bamboo sticks, thread, varnish etc |
329 | Cost of scrap copper dismanttled windings |
330 | Repairs to horizontal Motor with rating above 50HP to 100HP) Dismantling of the horiontal motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items. |
331 | Copper wire used in rewinding the motor. |
332 | Rewinding,Skilled labor, insulated paper and sleeves used during rewinding and testing of motor at site. |
333 | Providing/fitting of connection platefor Horizontal motors from 05HP to 50 HP |
334 | Cost on account of associated/consumable items like crimpled paper, sleeves, PVC paper, bamboo sticks, thread, varnish etc |
335 | Cost of scrap copper dismanttled windings |
336 | Repairs to borewell submersible Motor with rating from and above 5HP to 25HP Dismantling of the submersible motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items. |
337 | Copper wire used in rewinding the motor. |
338 | Rewinding,Skilled labor, insulated paper and sleeves used during rewinding and testing of motor at site. |
339 | Cost on account of associated/consumable items like crimpled paper, sleeves, PVC paper, bamboo sticks, thread, varnish etc |
340 | Cost of scrap copper dismanttled windings |
341 | Cost for replacement of thrust bearing Racer Ratchet |
342 | Cost on account of replacement of gun metal bushes |
343 | Repairs to borewell submersible Motor with rating from and above 25HP to 50HP Dismantling of the submersible motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items. |
344 | Copper wire used in rewinding the motor. |
345 | Rewinding,Skilled labor, insulated paper and sleeves used during rewinding and testing of motor at site. |
346 | Cost on account of associated/consumable items like crimpled paper, sleeves, PVC paper, bamboo sticks, thread, varnish etc |
347 | Cost of scrap copper dismanttled windings |
348 | Cost for replacement of thrust bearing Racer Ratchet |
349 | Cost on account of replacement of gun metal bushes |
350 | Repairs to borewell submersible Motor with rating from and above 50HP to 75HP Dismantling of the submersible motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items. |
351 | Copper wire used in rewinding the motor. |
352 | Rewinding,Skilled labor, insulated paper and sleeves used during rewinding and testing of motor at site. |
353 | Cost on account of associated/consumable items like crimpled paper, sleeves, PVC paper, bamboo sticks, thread, varnish etc |
354 | Cost of scrap copper dismanttled windings |
355 | Cost for replacement of thrust bearing Racer Ratchet |
356 | Cost on account of replacement of gun metal bushes |
357 | Repairs to open well submersible Motor with rating from and above 5HP to 25HP Dismantling of the submersible motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items. |
358 | Copper wire used in rewinding the motor. |
359 | Rewinding,Skilled labor, insulated paper and sleeves used during rewinding and testing of motor at site. |
360 | Cost on account of associated/consumable items like crimpled paper, sleeves, PVC paper, bamboo sticks, thread, varnish etc |
361 | Cost of scrap copper dismanttled windings |
362 | Cost for replacement of thrust bearing Racer Ratchet/ Mechanical Seal |
363 | Cost on account of replacement of gun metal bushes/Bearings |
364 | Cost of Cooling Oil |
365 | Repairs to open well submersible Motor with rating from and above 25HP to 50HP Dismantling of the submersible motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items. |
366 | Copper wire used in rewinding the motor. |
367 | Rewinding,Skilled labor, insulated paper and sleeves used during rewinding and testing of motor at site. |
368 | Cost on account of associated/consumable items like crimpled paper, sleeves, PVC paper, bamboo sticks, thread, varnish etc |
369 | Cost of scrap copper dismanttled windings |
370 | Cost for replacement of thrust bearing Racer Ratchet/ Mechanical Seal |
371 | Cost on account of replacement of gun metal bushes/Bearings |
372 | Cost of Cooling Oil |
373 | Replacing of damages illumination single core multistranded copper wiring |
374 | Providing/fitting of AVR Relayto DG set as per sample (25 KVA to 62.5KVA) |
375 | Providing/fitting of AVR Relay to DG set as per sample (62.5 KVA to 162.5KVA) |
376 | Repair and rewinding of DG set cooling fan |
377 | Minor Repair to wiring of DG Set |
378 | Providing/fitting of Battery connection leads with copper connectors |
379 | Replacing of damages illumination single core multistranded copper wiring |
380 | Replacement of damaged electrification and electrification of pump house including cost of channels/conduits, fitting charges, transportation and testing on load at site |
381 | Lighting points in 1.0mm2 copper wire including 5W LED lamp |
382 | Heating points in 2.5 mm2 copper wire including 16Amp SS combined |
383 | Providing of 5W/7W LED lamp |
384 | Providing/fitting of Steel coupling for submersible motors from 05HP to 50 HP including cotter |
385 | Repairs to the rotor/body, fan, shield of Horizontal motor |
386 | Repairs to self / Dynamo of DG set |
387 | Note: The Scrap Value mentioned above shall be deducted from the total valve of BOQ to arrive at value without scrap. The value thus attained shall be again deducted by total scrap value to get the effective amount on BOQ for ascertainingoverall L1. Unless specified, the old material shall be returned to divisional/sub divisional store |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail