Supply Of 01 No. New Swing Hammer Type Fibrizer Supply Of 01 No. New Swing Hammer Type Fibrizer , Technical Specification And Scope Of Supply For 01 No New Swing Hammer Type Fibrizerfor The Crushing Season 2021-22 , Factory Requires Onturnkey Basis Sw, Hasanpur-Uttar Pradesh

Supply Of 01 No. New Swing Hammer Type Fibrizer Supply Of 01 No. New Swing Hammer Type Fibrizer , Technical Specification And Scope Of Supply For 01 No New Swing Hammer Type Fibrizerfor The Crushing Season 2021-22 , Factory Requires Onturnkey Basis Swinghammer Type Fibrizer Located At The Head End Ofthe Primarycane Carrier To Suit 1525 Mm Wide Cane Carrier Having 66 Hammersplaced In Six No Of Rows Shall Be Provided. The Hammers Shall Be Mounted On The Rotor With The Help Of Intermediate Star Type Hubs And 02 No End Discs. Weight Of Each Hammer Shall Not Be Less Than 18 Kg Without Carbide Tips. The Hammer Shank Shall Be Cut From Carbon Steel Plate Confirming To Is 2062 Gr. A And Shall Not Be Less Than 50 Mm Thick. Hammers Shall Be Provided With Carbide Tips Of 100Mm X 100 Mm Size With Hardness 58-60 Hrc And Shall Be Duly Reversible Type. Fibrizer Shall Be Capable Of Giving P.I. Of More Than 85 + Measured By Alderic Remar Method. The Rotor Shaft Shall Be Of Existing Shaft Dia 250 Mm At The Hubs And Existing Shaft Dia 200 Mm At The Bearing Journals And Shall Be 45 C8quality Steel As Per Is 1570. The Fibrizer Rotor Shall Be Supported On Heavy Duty Self Aligning Double Row Spherical Roller Bearings 23144K ( Fag Make ) Shalll Be Mounted On Shaft With Adopter / Withdrawal Sleeve. Both Side Plumber Blocks Of Heavy Duty M.S.Fabricatedwater Cooled And Oil Lubricated With Aprovision Of Sight Glass. Tip Diameter Of Hammer Shall Have 1830 Mm Dia When Running At 750 Rpm. The Fibrizer Shall Have Detachable Domite Tips Made Of Special Shock Resistance Alloy Steel And Secured Through 60 Mm Dia S.S. 410 Pins. The Hammer Shank And Fabricated Fibrizer Hubs Shall Have S.S. 409 Bushes To Suit S.S. Pins. Fabricated Carbon Steel Hubs Shall Be Of As Per Is: 2062 Grade “A” And Shall Be Tightly Fitted With Single Keyway On Rotor Shaft. Deflector Plate Made Of M.S. 20 Mm Thick With 2.5 Mm To 3.5 Mm S.S. 409 Lining Shall Be Provided.Side Plate Of M.S. 16 Mm Thick With 2.5 Mm To 3.5 Mm S.S. 409 Lining Shall Be Provided. Anvil Plate Shall Be Pocketed Design Having Wrap Angle 160°. The Base Plate Shall Be Made Of M.S. Having Thickness Of 32 Mm.Hard Facing Of The Anvil Working Surface Shall Be Having Hardness 600 Bhn. Anvil Plate Shall Have Provision For Adjusting The Anvil Clearances At Three Points. The Fibrizer Rotor Shall Be Completely Covered By Reinforced M.S. Fabricated Made Out Of 12 Mm Thick Plate Attached To The Primary Cane Carrier. Frame Work And Shall Be Complete With Deflector Plate, Adjusting Mild Steel Fabricated Anvil Plate, Anvil Suspension Gear. Pressure Lubricating System For Bearings Shall Be Provided. Provision Shall Be Made For 2 No Oil Pumps, 2 No Coolers ( One Each As Standby ) Oil Reservoir, Pressure Gauge, Piping Return Line, Needle Valve Filling Etc And Auto Starting Of Stand By Pump. Fabricated Pedestals Plummer Block Bolts Coupling Guards Shall Be Provided. Two Sets Of Geared Type Coupling Ofmodel No Gc-08 Shall Be Provided. Terms 1. Complete Work On Turnkey Basis, It Includes Design, Drawing, Supply, Erection And Commissioning Including Dismantling Of Existing Fibrizer. 2. All Work In All Respect Is To Be Completed By 30Th September 2021 Positively. 3. Warranty Two Crushing Season I.E. 2021-22 And 2022-23.

INR 590 /-

INR 100000.0 /-

INR 50 Lakhs /-