Rate Contract For Supply Of Consumables And Non Consumables Rate Contract For Supply Of Consumables And Non Consumables For The Department Of Emergency Medicine And Trauma Care For 2021 22 , Consumable Items , Raney Clips , Rust Remover And Lubrican, Jipmer Puducherry-Puducherry

TDR : 28697339

Tender Notice
BOQ

Expired

Jipmer Puducherry , Puducherry

Tender Brief : Rate Contract For Supply Of Consumables And Non Consumables Rate Contract For Supply Of Consumables And Non Consumables For The Department Of Emergency Medicine And Trauma Care For 2021 22 , Consumable Items , Raney Clips , Rust Remover And Lubrican

Document Fees
₹ 590 /-

EMD
Refer document

Tender Value
Refer document

Submission Date
30-08-2021

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	CONSUMABLE ITEMS
2	Raney clips
3	Rust remover and lubricant low pressure spray canister400ml
4	Eshmarch tourniquette10 cm x2 metres & 15 cm x 3 metres
5	Skin Graft Blade
6	Disposable bull dogs [small size ]
7	Cannulated drill bit 4.5x 200
8	Cannulated drill bit 4.5x 250
9	Cannulated drill bit 3.2x170mm
10	Cannulated drill bit 2.5/2.7x150
11	Cannulated drill bit 2.5/2.7x170
12	Solid drill bit 4.5x180
13	Solid drill bit 4.5x200
14	Solid drill bit 4.5x250
15	Solid drill bit 3.2x170
16	Washers[for 6.5 mm screws]
17	Washers[for 4.0 mm screws ]
18	SS wires16guage
19	SS wires18 guage
20	SS wires20 guage
21	SS wires22 guage
22	Non threaded double ended k wires 1.8x 12”
23	Non threaded double ended k wires 2 x 12”
24	Non threaded double ended k wires 2.5 x 12”
25	Non threaded double ended k wires 1 x 10”
26	Non threaded double ended k wires 1.2 x 10”
27	Non threaded double ended k wires 1.5 x 10”
28	Non threaded double ended k wire 3x10\"
29	Non threaded double ended k wire 3.5x10\"\"
30	Threaded double ended k wires 1.8x 12”
31	Threaded double ended k wires 2 x 12”
32	Threaded double ended k wires 2.5 x 12”
33	Steinmen pins 3.5mmx150, 3.5mmx200 each
34	Steinmen pins 4mmx150, 4mmx200 each
35	Steinmen pins 4.5mmx150, 4.5mmx200 each
36	Durhams pins 3.5mmx150, 3.5mmx200
37	Durhams pins 4mmx150, 4mmx200
38	Durhams pins 4.5mmx150, 4.5mmx200
39	3.5mm Cortical screws 12 mm
40	3.5mm Cortical screws 14 to 44 mmsize: 14,16,18,20,22,24,26,28,30,32,34,36,38,40,42,44 mm
41	3.5mm Cortical screws 46 to 60 mmsize: 46,48,50,52,54,56,58,60 mm
42	4.5mm Cortical screws 18 to 40 mmsize: 18,20,22,24,26,28,30,32,34,36,38,40 mm
43	4.5mm Cortical screws 42 to 60 mm Size : 42,44,46,48,50,52,54,56,58,60 mm
44	2.4 mm drill type Beath pin (10 inch long)
45	Gigli saw wire Thick
46	Gigli saw wire Thin
47	2 mm Guide wire beaded -200cm
48	2 mm Guide wire non-beaded - 200cm
49	DHS
50	DHS short barrel3H
51	DHS short barrel4H
52	DHS short barrel5H
53	DHS short barrel 6H
54	DHS short barrel7H
55	DHS short barrel 8H
56	DHS short barrel9H
57	DHS short barrel10H
58	DHS long barrel 3H
59	DHS long barrel 4H
60	DHS long barrel 5H
61	DHS long barrel 6H
62	DHS long barrel 7H
63	DHS long barrel 8H
64	DHS long barrel 9H
65	DHS long barrel 10H
66	Richard screw with compression screw 60 mm
67	Richard screw with compression screw 65 mm
68	Richard screw with compression screw 70 mm
69	Richard screw with compression screw 75 mm
70	Richard screw with compression screw 80 mm
71	Richard screw with compression screw 85 mm
72	Richard screw with compression screw 90 mm
73	Richard screw with compression screw 95 mm
74	Richard screw with compression screw 100 mm
75	Richard screw with compression screw 105 mm
76	EX FIX ITEMS
77	Tubular rods for external fixators size: 100,150,200,250mm
78	Tubular rods for external fixators size: 300,350 mm
79	Tubular rod for external fixatorssize: 400,450mm
80	A.O Single pin clamp
81	Metaphyseal win pin clamp
82	Tube to tube clamp
83	Twin clamps
84	25 mm Threaded pointed trochar tip scahnz pin (4mmx150)
85	32 mm Threaded pointed trochar tip scahnz pin (4mmx150)
86	25,32,40mm Threaded pointed trochar tip scahnz pin 4mmx170
87	25,32,40mm Threaded pointed trochar tip scahnz pin 4mmx200
88	25,32,40mm Threaded pointed trochar tip scahnz pin 4.5x170
89	25,32,40mm Threaded pointed trochar tip scahnz pin 4.5x200
90	30 mm Cancellous threaded pointed trochar tip scahnz pin (4.5mmx150)
91	20 mm, 30 mm, 40 mm Threaded pointed trochar tip scahnz pin (5mmx200)
92	20 mm, 30 mm, 40 mm Threaded pointed trochar tip scahnz pin (5mmx170)
93	30 mm, 40 mm Cancellous threaded pointed trochar tip scahnz pin (5mmx200)
94	25 mm, 40 mm, 60 mm Conical tapered threaded pointed trochar tip scahnz pin (6mmx200)
95	25 mm, 40 mm, 60 mm Cancellous threaded pointed trochar .tip scahnz pin (6mmx200)
96	Double loaded suture anchor i) should be made of titanium ii) suture should be non absorbable and of high tensile strength iii) sutures should have needle attachedsize: 3mm and 5 mm
97	ILLIZAROV ITEMS
98	Tubular rods for external fixators size: 100,150,200,250mm
99	Tubular rods for external fixators size: 300,350 mm
100	Tubular rod for external fixatorssize: 400,450mm
101	A.O Single pin clamp
102	Metaphyseal win pin clamp
103	Tube to tube clamp
104	Twin clamps
105	25 mm Threaded pointed trochar tip scahnz pin (4mmx150)
106	32 mm Threaded pointed trochar tip scahnz pin (4mmx150)
107	25,32,40mm Threaded pointed trochar tip scahnz pin 4mmx170
108	25,32,40mm Threaded pointed trochar tip scahnz pin 4mmx200
109	25,32,40mm Threaded pointed trochar tip scahnz pin 4.5x170
110	25,32,40mm Threaded pointed trochar tip scahnz pin 4.5x200
111	30 mm Cancellous threaded pointed trochar tip scahnz pin (4.5mmx150)
112	20 mm, 30 mm, 40 mm Threaded pointed trochar tip scahnz pin (5mmx200)
113	20 mm, 30 mm, 40 mm Threaded pointed trochar tip scahnz pin (5mmx170)
114	30 mm, 40 mm Cancellous threaded pointed trochar tip scahnz pin (5mmx200)
115	25 mm, 40 mm, 60 mm Conical tapered threaded pointed trochar tip scahnz pin (6mmx200)
116	25 mm, 40 mm, 60 mm Cancellous threaded pointed trochar .tip scahnz pin (6mmx200)
117	Double loaded suture anchor i) should be made of titanium ii) suture should be non absorbable and of high tensile strength iii) sutures should have needle attachedsize: 3mm and 5 mm
118	italian arch16090 degree
119	italian arch160 120 degree
120	italian arch18090 degree
121	italian arch180 120 degree
122	Male post1h,2h,3h,4h,5h
123	Oblique support
124	Olive wires
125	Rods ,110,130,150mm
126	Rods 220,240,260,280,300,320,340,360,380,400 mm
127	Schanz pin holding clamp
128	Trocar wires 1.5 mm
129	Trocar wires 1.8 mm
130	Twisted plates1h,2h,3h,4h,5h
131	Antegrade Femur nail (For Detailed Specification refer Tender Document)
132	Interlocking femur nail 9 x 32, 9 x 44, 9 x 46
133	Interlocking femur nail 10 x 32, 10 x 44, 10 x 46
134	Interlocking femur nail 11 x 32, 11 x 44
135	Interlocking femur nail 11 x 46
136	Interlocking femur nail 9 x 34, 9 x 36, 9 x 38, 9 x 40
137	Interlocking femur nail 9 x 42
138	Interlocking femur nail 10 x 34, 10 x 36, 10 x 38, 10 x 40
139	Interlocking femur nail 10 x 42
140	Interlocking femur nail 11 x 34, 11 x 36, 11 x 38, 11 x 40
141	Interlocking femur nail 11 x 42
142	Interlocking femur nail 12 x 32, 12 x 34, 12 x 36, 12 x 38
143	Interlocking femur nail 12 x 40, 12 x 42, 12 x 44, 12 x 46
144	Tibial interlocking nail (For Detailed Specification refer Tender Document)
145	Interlocking tibial nail 8 x 28, 8 x 30, 8 x 32
146	Interlocking tibial nail 9 x 28, 9 x 30, 9 x 32
147	Interlocking tibial nail 10 x 28, 10 x 30, 10 x 32
148	Interlocking tibial nail 8 x 34, 8 x 36, 8 x 38
149	Interlocking tibial nail 9 x 34, 9 x 36, 9 x 38
150	Interlocking tibial nail 10 x 34, 10 x 36, 10 x 38
151	LONG PFNUNIT(For Detailed Specification refer Tender Document)
152	Long PFN ( Right & Left )9 x 32, 9 x 42, 9 x 44
153	Long PFN ( Right & Left ) 10 x 32, 10 x 42, 10 x 44
154	Long PFN( Right & Left ) 11 x 32, 11 x 42, 11 x 44
155	Long PFN( Right & Left )9 x 34, 9 x 36, 9 x 38, 9 x 40
156	Long PFN ( Right & Left ) 10 x 34, 10 x 36, 10 x 38, 10 x 40
157	Long PFN ( Right & Left )11 x 34, 11 x 36, 11 x 38, 11 x 40
158	MONOAXIAL SPINE PEDICLE SCREWS(For Detailed Specification refer Tender Document)
159	Monoaxial screws 4.5 x 25
160	Monoaxial screws 4.5 x 30
161	Monoaxial screws 4.5 x 35
162	Monoaxial screws 5.5 x 30
163	Monoaxial screws 5.5 x 35
164	Monoaxial screws 5.5 x 40
165	Monoaxial screws 5.5 x 45
166	Monoaxial screws 6.5 x 30
167	Monoaxial screws 6.5 x 35
168	Monoaxial screws 6.5 x 40
169	Monoaxial screws 6.5 x 45
170	POLYAXIAL SPINE PEDICLE SCREWS(For Detailed Specification refer Tender Document)
171	Polyaxial screws 4.5 x 25
172	Polyaxial screws 4.5 x 30
173	Polyaxial screws 4.5 x 35
174	Polyaxial screws 5.5 x 30
175	Polyaxial screws 5.5 x 35
176	Polyaxial screws 5.5 x 40
177	Polyaxial screws 5.5 x 45
178	Polyaxial screws 6.5 x 30
179	Polyaxial screws 6.5 x 35
180	Polyaxial screws 6.5 x 40
181	Polyaxial screws 6.5 x 45
182	5.5mm Titanium rod for use with spine pedicle screw (400 mm)
183	4.5 MMLOCKING PLATES (For Detailed Specification refer Tender Document)
184	4.5mm NarrowLCP 5H, 6H, 8H, 10H
185	4.5mm NarrowLCP 12,14,16 HOLE
186	4.5mm Broad LCP 5H, 6H, 8H, 10H
187	4.5mm Broad LCP 12,14,16 HOLE
188	RECON LCP 4H,6H,8H,10H,12H,14H,16H
189	Proximal Femur Locking LCP i) unit: 1 unit consists of plate-1 no. along with appropriate type and number of screws as per the plate holes. ii)plate head should have atleast five locking screw holes and should be a combination of 6.5/7 mm and 4.5/5 mm and shaft should have combi holes iii) supplier should supply the complete set of instruments including drill bit, tap, depth gauge, threaded drill sleeve, screw driver, aiming device/guiding block on loaner basis till stocks lastiv) inventory with all screw sizes should be maintained in jipmer v) supplier should be ready to exchange unused implants for required sizesvi) Prices quoted should be inclusive of screw costsvii) Implants should be made of surgical grade stainless steelviii) Sizes required:left : 6 h,8h,10h,12h,14h right : 6h,8h,10h,12h,14h
190	DIstal Femur Locking LCPi) unit: 1 unit consists of plate-1 no. along with appropriate type and number of screws as per the plate holes. ii) plate head should have atleast six locking screw holes and should be a combination of 6.5/7 mm and 4.5/5 mm and shaft should have combi holesiii) supplier should supply the complete set of instruments including drill bit, tap, depth gauge, threaded drill sleeve, screw driver, aiming device/guiding block on loaner basis till stocks lastiv) inventory with all screw sizes should be maintained in jipmer v) supplier should be ready to exchange unused plates for required sizes distal femur locking lcp vi) Prices quoted should be inclusive of screw costsvii) Implants should be made of surgical grade stainless steel viii) Sizes required: left: 5h,6h,8h,10h,12h,14h right: 5h,6h,8h,10h,12h,14h
191	3.5mm Medial Proximal Tibial Locking LCP i) unit: 1 unit consists of plate-1 no. along with appropriate type and number of screws as per the plate holes. ii) plate head should have atleast four locking screw holesand shaft should have combi holes iii) supplier should supply the complete set of instruments including drill bit, tap, depth gauge, threaded drill sleeve, screw driver, aiming device/guiding block on loaner basis till stocks last iv) inventory with all screw sizes should be maintained in jipmerv) supplier should be ready to exchange unused plates for required vi) Prices quoted should be inclusive of screw costs vii) Implants should be made of surgical grade stainless steelviii) sizes requiredleft: 3h,4h,6h,8h,10hright: 3h 4h,6h,8h,10h
192	3.5 mm Lateral Proximal Tibial Locking LCP i) unit: 1 unit consists of plate-1 no. along with appropriate type and number of screws as per the plate holes.ii) plate head should have atleast five locking screw holesand shaft should have combi holes iii) supplier should supply the complete set of instruments including drill bit, tap, depth gauge, threaded drill sleeve, screw driver, aiming device/guiding block on loaner basis till stocks last iv) inventory with all screw sizes should be maintained in jipmerv) supplier should be ready to exchange unused plates for required sizes vi) Prices quoted should be inclusive of screw costs vii) Implants should be made of surgical grade stainless steelviii) Sizes Required left:3h,4h,6h,8h,10h right: 3h,4h,6h,8h,10h
193	4.5mm Lateral Proximal Tibial Locking LCP i) unit: 1 unit consists of plate-1 no.,4/5/6.5 mm locking screws- 4 nos. for plate head, 4.5/5 mm locking cortical screws - 4 nos. for plate shaftii) plate head should have atleast four locking screw holesand shaft should have combi holes.iii) supplier should supply the complete set of instruments including drill bit, tap, depth gauge, threaded drill sleeve, screw driver, aiming device/guiding block on loaner basis till stocks last iv) inventory with all screw sizes should be maintained in jipmerv) supplier should be ready to exchange unused plates for required sizes left:3h,4h,6h,8h,10h,12h,14h Right: 3h,4h,6h,8h,10h,12h,14h
194	3.5 mm Postero Mdial Proximal Tibial Locking LCPi) unit: 1 unit consists of plate-1 no. along with appropriate type and number of screws as per the plate holes. ii) plate head should have atleast four locking screw holesand shaft should have combi holes iii) supplier should supply the complete set of instruments including drill bit, tap, depth gauge, threaded drill sleeve, screw driver, aiming device/guiding block on loaner basis till stocks lastiv) inventory with all screw sizes should be maintained in jipmer v) supplier should be ready to exchange unused implants vi) Prices quoted should be inclusive of screw costs vii) Implants should be made of surgical grade stainless steel viii)Sizes required sizes 2h,4h,6h
195	3.5/4mm Antero lateral distal tibial anatomical locking LCP i) unit: 1 unit consists of plate-1 no. and screws as per number and type of plate holes ii) price quoted should be inclusive of screwsiii) plate head should have atleast five locking screw holesand shaft should have combi holesiv) suppliershould supply the complete set of instruments including drill bit, tap, depth gauge, threaded drill sleeve, screw driver, aiming device/guiding block on loaner basis till stocks last v) inventory with all screw sizes should be maintained in jipmer vi) supplier should be ready to exchange unused plates for required sizes as and when need arises vii) Plate sizes required left: 4h,6h,8h,10h,12h right: 4h,6h,8h,10h,12hviii) Plate and screws should be made of surgical grade stainless steel
196	3.5/4 mm medial distal tibial anatomical locking LCPi) unit: 1 unit consists of plate-1 no. and screws as per number and type of plate holesii) price quoted should be inclusive of screws iii) plate head should have atleast five locking screw holesand shaft should have combi holes iv) suppliershould supply the complete set of instruments including drill bit, tap, depth gauge, threaded drill sleeve, screw driver, aiming device/guiding block on loaner basis till stocks last v) inventory with all screw sizes should be maintained in jipmervi) supplier should be ready to exchange unused plates for required sizes as and when need arisesvii) Plate sizes required left: 6h,8h,10h,12h right: 6h,8h,10h,12hviii) Plate and screws should be made of surgical grade stainless steel
197	Antero lateral distal tibial lcp 4h to 8hole
198	SHORT PFNUNIT(For Detailed Specification refer Tender Document)
199	Short PFN 9 X 240 MM
200	Short PFN 10 X 240 MM
201	Short PFN 11 X 240 MM
202	3.5 MM SYSTEM PLATES
203	3.5mm System Plates DCP 4H
204	3.5mm System Plates DCP 5H
205	3.5mm System Plates DCP 6H
206	3.5mm System Plates DCP 7H
207	3.5mm System Plates DCP 8H
208	3.5mm System Plates DCP 9H TO 14 HOLE
209	3.5mm Calcaneal perimeter plate
210	LCDCP 5 HOLE TO 8 HOLE
211	LCDCP 9 HOLE TO 14 HOLE
212	1/3 TUBULAR PLATES 4H, 9H, 10H, 11H, 12HOLE
213	1/3 TUBULAR PLATES 5H, 6H, 7H, 8H
214	T PLATES 3H
215	T PLATES 4H
216	T PLATES 5H
217	T PLATES 6H
218	T PLATES 7H
219	T PLATES 8H
220	OBLIQUE T PLATES [RT] 3H
221	OBLIQUE T PLATES [LT] 3H
222	OBLIQUE T PLATES [RT] 4H
223	OBLIQUE T PLATES [LT] 4H
224	OBLIQUE T PLATES [RT] 5H
225	OBLIQUE T PLATES [LT] 5H
226	OBLIQUE T PLATES [RT] 6H
227	OBLIQUE T PLATES [LT] 6H
228	OBLIQUE T PLATES [RT] 7H
229	OBLIQUE T PLATES [LT] 7H
230	OBLIQUE T PLATES [RT] 8H
231	OBLIQUE T PLATES [LT] 8H
232	4.5mm System Plates Narrow DCP 4H
233	4.5mm System Plates Narrow DCP 5H
234	4.5mm System Plates Narrow DCP 6H
235	4.5mm System Plates Narrow DCP 7H
236	4.5mm System Plates Narrow DCP 8H
237	4.5mm System Plates Narrow DCP 9H
238	4.5mm System Plates Narrow DCP 10H
239	4.5mm System Plates Narrow DCP 12H
240	4.5mm System Plates Narrow DCP 14H
241	4.5mm System Plates Narrow DCP 16H
242	4.5 MM System Plates Broad DCP 4,5,6,7,8,9,10 HOLE ( Each 50)
243	4.5 MM System Plates Broad DCP 12 AND 14 HOLE
244	4.5mm RECON PLATES 4,5,6,7,8,9,10,11,12 HOLE
245	4.5mm T BUTRESS Plates [3H, 4H, 5H, 6H, 7H, 8H]
246	4.5mm L BUTRESS Plates [RT & LT : 4H, 5H, 6H, 7H, 8H]
247	3.5mm LOCKING LCP 4H, 6H, 8H, 10H, 12H, 14H, 16 HOLE (Each size 50Nos) - Supplier should supply the complete set of instruments including drill bit, threaded drill sleeve , screw driver with compatible screws
248	RECON LOCKING PLATES 4H, 6H, 8H, 10H, 12H, 14H, 16 HOLE
249	2.4/2.7/3.5 ANATOMICAL LOCKING PLATES
250	Proximal Humerus LCPi) unit: 1 unit consists of plate-1 no. along with appropriate type and number of screws as per the plate holes. iii) plate head should have eight locking screw holes and shaft should have combi holesiii)supplier should supply the complete set of instruments including drill bit, tap, depth gauge, threaded drill sleeve, screw driver, aiming device/guiding block on loaner basis till stocks last iv) inventory with all screw sizes should be maintained in jipmer v) supplier should be ready to exchange unused plates for required implants vi) Prices quoted should be inclusive of screw costs vii) Implants should be made of surgical grade stainless steelviii)Required sizes:left: 3h,4h, 5h,6h,7h,8h,9h,10h right: 3h,4h,5h,6h,7h,8h,9h,10h
251	Dital Humerus Medial LCP i) unit: 1 unit consists of plate-1 no. along with appropriate type and number of screws as per the plate holes.ii) plate head should have atleast three locking screw holes and shaft should have combi holesiii) supplier should supply the complete set of instruments including drill bit, tap, depth gauge, threaded drill sleeve, screw driver, aiming device/guiding block on loaner basis till stocks lastiv) inventory with all screw sizes should be maintained in jipmerv) supplier should be ready to exchange unused plates for required implantsvi) Prices quoted should be inclusive of screw costs vii) Implants should be made of surgical grade stainless steelviii) Required sizes left: 3h,4h,5h,6hright: 3h,4h,5h,6h
252	Dital Humerus Postero lateral LCP i) unit: 1 unit consists of plate-1 no. along with appropriate type and number of screws as per the plate holes. ii) plate head should have condylar extension and atleast five locking screw holes and shaft should have combi holes iii) supplier should supply the complete set of instruments including drill bit, tap, depth gauge, threaded drill sleeve, screw driver, aiming device/guiding block on loaner basis till stocks last iv) inventory with all screw sizes should be maintained in jipmer v) supplier should be ready to exchange unused plates for required implantsvi) Prices quoted should be inclusive of screw costsvii) Implants should be made of surgical grade stainless steelviii) Required sizes left: 3h,4h,5h,6hright: 3h,4h,5h,6h
253	Distal Humerus Extra Articular Anatomical Locking Plate i) unit: 1 unit consists of plate-1 no. along with appropriate type and number of screws as per the plate holes.ii) plate head should be anatomical to posterior contour of lateral condyle, atleast five locking screw holes and shaft should have combi holes .iii) supplier should supply the complete set of instruments including drill bit, tap, depth gauge, threaded drill sleeve, screw driver, aiming device/guiding block on loaner basis till stocks last iv) Iventory with all screw sizes should be maintained in jipmerv) supplier should be ready to exchange unused plates for required implnatsvi) Prices quoted should be inclusive of screw costs vii) Implants should be made of surgical grade stainless steelviii) required sizes left: 4h,5h,6hright: 4h,5h,6h
254	2.4/2.7/3.5mm Proximal ULNA Locking i) unit: 1 unit consists of plate-1 no. along with appropriate type and number of screws as per the plate holes. ii) plate head should have atleast four locking screw holes and shaft should have combi holes iii) supplier should supply the complete set of instruments including drill bit, tap, depth gauge, threaded drill sleeve, screw driver, aiming device/guiding block on loaner basis till stocks last iv) inventory with all screw sizes should be maintained in jipmerv) supplier should be ready to exchange unused plates for required implants vi) Prices quoted should be inclusive of screw costs vii) Implants should be made of surgical grade stainless steelviii)Required sizes 3h,4h,5h
255	2.4/2.7 mm Dual column Distal Radius Volar Locking Plate unit: i) unit: 1 unit consists of plate-1 no. along with appropriate type and number of screws as per the plate holes.ii) plate head should have atleast eight locking screw holes and shaft should have combi holes iii) supplier should supply the complete set of instruments including drill bit, tap, depth gauge, threaded drill sleeve, screw driver, aiming device/guiding block on loaner basis till stocks lastiv) inventory with all screw sizes should be maintained in jipmerv) supplier should be ready to exchange unused plates for requiredvi) Prices quoted should be inclusive of screw costs vii) Implants should be made of surgical grade stainless steel viii)sizes Required3h, 4h, 5h
256	2.4/3.5 mm Lateral End Cavicle Locking Platei)unit: 1 unit consists of plate-1 no. along with appropriate type and number of screws as per the plate holes.ii) plate head should have atleast five locking screw holes and shaft should have combi holes iii) supplier should supply the complete set of instruments including drill bit, tap, depth gauge, threaded drill sleeve, screw driver, aiming device/guiding block on loaner basis till stocks last iv) inventory with all screw sizes should be maintained in jipmerv) supplier should be ready to exchange unused plates for required implants vi) Prices quoted should be inclusive of screw costs vii) Implants should be made of surgical grade stainless steel viii) Sizes required left: 3h,4h,5h right: 3h,4h,5h
257	TITANIUM ELASTIC NAIL(For Detailed Specification refer Tender Document)
258	Titanium elastic nail2 mm
259	Titanium elastic nail2.5 mm
260	Titanium elastic nail 3 mm
261	Titanium elastic nail 3.5 mm
262	Titanium elastic nail 4 mm
263	6.5/7 mm partially threaded/fully threaded cannulated cancellous Screws 1. Should be made of surgical grade titanium 2. Screws should be supplied with equal number of compatible washers 3. The complete set of necessary instruments required for screw insertion (including compatible threaded guide wires(10 nos) should be supplied on loaner basis iv) Sizes required in increments of 5 mm: 75 mm to 95 mm - 10 each (50) , 100 mm to 120 mm - 15 each (75) , 125mm to 135 mm - 5 each (15)
264	Reconstruction femoral nail 1. Should be made of surgical grade stainless steel or titanium 2. Nail should be compatible with antegrade piriform fossa entry3. Proximal nail should have options for recon bolts, descending trochanteric bolts and lateral to medial standard interlocking bolt (2 each)4. Distal nail should atleast two locking holes 5. The complete set of instrumentation required for nail and locking bolt insertion should be supplied on loaner basis6. One nail along with all the requisite bolts will be considered as one unit7.Prices quoted should be inclusive of screw costs 8. Sizes required: 9mm x 38, 40, 42 - 4 units each10mm x 38,40,42 - 8 units 11mm x 38,40,42 - 8 units each
265	Supracondylar nail with blade1. Should be made of surgical grade stainless steel or titanium 2. Nail should be compatible with retrograde intercondylar notch entry 3. Proximal nail should have atleat two antero posterior locking holes and distal nail should have at least 3 medio lateral locking holes of which one should accomodate a blade type locking bolt4. The complete set of instrumentation required for nail and locking bolt insertion should be supplied on loaner basis5. One nail along with all the requisite bolts will be considered as one unit 6. Prices quoted should be inclusive of screw costs 7. Sizes required: 9 mm x 30,32,34 - 2 units each10 mm x 30,32,34,36,38 - 2 units each 11 mm x 30,32,34,36,38 - 2 units each
266	EXPERT Tibial nail for Metaphysial - Diphysial fractures.i) UNIT: Each tibial interlocking nail unit consist of tibial interlocking nail - 1 No along with appropriate type and number of locking bolts ii)Proximal part of nail should have 5 locking options, 3 oblique and 2 medio- lateral.Distal part of nail should have 4 locking option in multiple directions (assorted sizes) iii) Supplier should be ready to exchange unused implants for required sizesiii) Implants should be made of surgical grade stainless steel iv) Complete instrumentation set should be supplied on loaner basisPrice should be quoted for complete unit vi) Supplier should be ready to exchange unused implants for required sizes vii) Sizes required 8,9,10 x 28,30,32,34 - 2 each
267	2.4 mm radial head locking LCP i) UNIT -1 unit consists of anatomical radial head locking plate 1 no along with appropriate type and number of screws as per plate holes ii) Plate head should have atleast 5 screw holes and shaft should have combi holesiii) supplier should supply the complete set of instruments including drill bit, tap, depth gauge, threaded drill sleeve, screw driver, aiming device/guiding block on loaner basis till stocks lastiv) inventory with all screw sizes should be maintained in jipmerv) supplier should be ready to exchange unused plates for required implantsvi) Prices quoted should be inclusive of screw costs vii) Implants should be made of surgical grade stainless steel viii)Required sizes:2h,3h,4h
268	Disposable monopolar cable compitable toAlan Diathermy
269	Resuable bipolar cablecompitable toAlan Diathermy
270	Bipolar forceps straighttip with cable compitable toAlan Diathermy
271	Bipolar forceps bayonet nonstick with cablecompitable to Alan Diathermy
272	Disposable cautery plate adult compitable to Alan Diathermy
273	Disposable cautery plate paediatric compitable toAlan Diathermy
274	Scratch pad for cautery pencil tip cleaning
275	Disposableimpervious surgeon gown
276	Craniotomy impervious drape
277	Impervious lamino spinal drape with transparent povidone iodine impregnated incisional adhesive drape in the centre
278	Transparent povidone iodine impregnated incisional adhesive drape size:60 x 75 cm
279	Disposable ‘c’ arm drape [should completely cover the c arm”should have adhesive surfaces or adhesive tapes to fasten to the c arm Suitable for SIMENS (Sir Moblie Compact ) and Skanray
280	Trolley impervious drape 150 x100
281	Trolley impervious drape 65x62
282	Laparatomy drape
283	Diposable impervious bed sheets83x48\"
284	NON CONSUMABLE ITEMS
285	Adson Non Toothed Forceps 4\"
286	Artery forceps Long Curved
287	Artery forceps Medium Curved
288	Balfour Retreactor
289	Battery operated orthopedic drill
290	Battery operated orthopedic saw
291	Bayonet Biopsy Forceps
292	Bayonet Forceps
293	Bonepunch horse shoe curved
294	Bonepunch horse shoe stright
295	Bone cutter medium
296	Bone cutter small
297	Bone file 150 mm
298	Bone Graft Punches LARGE 254 MM, HEAD DIA 12X18MM STRAIGHT & ANGLED
299	Bone Graft Punches SMALL 254 MM, HEAD DIA 9X15MM STRAIGHT & ANGLED
300	Bone hook
301	Bone impactor
302	Bone nibbler fine (angled & stright)
303	Bone nibbler RT Angled 3mm
304	Bone nibbler RT Angled 4mm
305	Bone nibbler RT Angled 5mm
306	Bone tap 3.5mm , 4.5mm
307	Brain retractor (malleable)
308	Bristo periostal elevator
309	Bull dog clamps micro
310	Bull dog curved
311	Cheatle forceps
312	Clamp holder 6\"
313	Cobbs elevator all sizes ( each 5nos)
314	Counter sink (3.5mm, 4.5mm, 5mm, 6mm )
315	Cross action towel clips
316	Debakey’s Forceps 4”
317	Debakey’s Forceps 6”
318	Debakey’s Forceps 8”
319	Dural guide
320	Fine cross clamp 4”
321	Fine suction nozzle [ size 3]
322	Fine suction nozzle [ size 4]
323	Fine suction nozzle [ size 5]
324	Fine tip right angled double action nibbler medium size
325	Finochette retractor [adult]
326	Finochette retractor [paediatric]
327	Forceps jar
328	Gigli saw handle ( set of 2nos )
329	Guide pin (1.0,1.2,1.5,1.8) x 20 cms, 2.0 mm x 30 cm
330	Guide wire aiming and repositioning devicei) should allow 5 degree angulation and 5 mm offset insertion ii). Should accommodate guide wires upto 3.2 mm
331	Universal Hand Drill with Keyless Chuck
332	Higgs retractor
333	Hinterman Retractor - Large
334	Hinterman Retractor - small
335	Howath dissector
336	Hudson brace full set (perforator, burr points and attachments)
337	Humbys knife handle
338	Jewellers forceps curved4\"
339	Knifehandle no-3
340	Knifehandle no-7
341	Laminectomy self retaining retractor
342	Langenberg retractor
343	Lumbar self retaining retractor big size
344	Malleable retractor 15x 1cm
345	Mallot big
346	Mallot small
347	Mayo scissors straight 8\"
348	MC Donald dissector
349	Medzenbalm Curved scissor 8\"
350	Medzenbalm scissors 8” inch curved
351	Medzenbalm scissors 8” inch straight
352	Micro dissector 4\"
353	Micro forceps toothed 6\"
354	Micro scissors [curved] 4\"
355	Micro scissors [straight] 6\"
356	Mollisons mastoid retractor medium size
357	Morrios reteratot medium size
358	Mosquito artery forceps curved 4\"
359	Mosquito artery forceps straightv 4\"
360	Needle holder 10\"
361	Needle holder 8\"
362	Needle holder castroveijo 6\"
363	Needle holder rider 6\"
364	Nerve hook 90 degrees
365	Nerve hook retractor8\"
366	Pellvic reduction instrumentation compelete set
367	Periosteal elevator - parabeuf6inch ,10inch
368	Periosteal elevator - parabeufforearm
369	Periosteal elevator [bristo ]
370	Periosteal elevator small with woooden handle
371	Pliers
372	Pointed reduction clamps [big ]
373	Pointed reduction clamps [medium]
374	Pointed reduction clamps [small ]
375	Potts scissor 8\"
376	Raney clip applicator 6\"
377	Renolds scissor 4\"
378	Renolds scissor 5\"
379	Renolds scissor 6\"
380	Reverse potts scissor 8\"
381	Rod cutter zimmer
382	Self retaining retractor medium size
383	Screw drivers cannulated 3.5
384	Screw drivers cannulated 6.5
385	Sponge holder
386	Sponge holding forceps
387	Suction regulator
388	Suture tying forceps 6\"
389	Tenotomy scissor 4\" curved
390	Tenotomy scissor 6\" curved
391	Tetra towel clips
392	Thumb forceps toothed
393	Tongue depressor
394	Universal‘T’handle (should have been designed to hold drill bits or schanz pins of upto 10mm diameter and should be cannulated)
395	Universal T handle with keyless chuck
396	Vertebral spreader
397	Vessel Dilator
398	Volkmans double ended currete 10 inch
399	Wire Puller
400	Wire Twister
401	Wooden handle scoop 2, 4, 5, 6, 8, 10, 12 mm
402	Yankauers suction nozzle
403	Gardner - Wells Skull Tongs along with Traction Pulley and 10kg weights (1kg - 6 Nos., 2kg - 2 Numbers) The skull tongs should have spring loaded pins.Adult -2NosPaediatric-2Nos
404	Mayfield Swivel Horse Shoe Head rest adult- Vertical and Lateraladjustments, adjustable Pad base, fluid resistant Gel Pads, pulley Rod attachment for Skeletal Traction.
405	Microprocessor Controlledcontinous Horizontal band ceiling machine withincrease /decrease in sealing temperature and sealing speadwith three years warranty
406	Mayfield Pediatric Horse Shoe Headrest- Vertical and Lateral adjustments, adjustable Pad base, fluid resistant Gel Pads.

Also Visit

Tenders

Puducherry Tenders

Apparel and Personal Care Tenders

Footwear Tenders

Footwears Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Rate Contract For Supply Of Consumables And Non Consumables Rate Contract For Supply Of Consumables And Non Consumables For The Department Of Emergency Medicine And Trauma Care For 2021 22 , Consumable Items , Raney Clips , Rust Remover And Lubrican, Jipmer Puducherry-Puducherry

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Rate Contract For Supply Of Consumables And Non Consumables Rate Contract For Supply Of Consumables And Non Consumables For The Department Of Emergency Medicine And Trauma Care For 2021 22 , Consumable Items , Raney Clips , Rust Remover And Lubrican, Jipmer Puducherry-Puducherry

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us