Construction Of Civil Cadwm Works Of Baghabasa Minor Irrigation Projects In Betonati Block Of Mayurbhanja District
Tender Value
Ref. Documents
Estimated cost
Bid Submission
01 Sep 2021
0 days left
EMD
2.92 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Betonati → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Civil Cadwm Works Of Baghabasa Minor Irrigation Projects In Betonati Block Of Mayurbhanja District
BOQ
| Sl. No. | Item Description |
| 1 | Name of Work: Baghabasa MIP, in Batonati Block of Mayurbhanja District. |
| 2 | Clearing and grubbing jungles including uprooting tank vegetation, grass bushes, shrubs, saplings and trees of girth up to 300mm, removal of stumps of trees cut earlier and disposal of unserviciable material and stacking of useful materials with supply of all labour T & P and all taxes as per prevailing norm etc. complete as directed by the Engineer-in-charge. |
| 3 | Excavation of foundation to proper profile in all kinds of soil with all leads and lifts including dressing and leveling the bed to proper slope and level and making it fit for laying concrete and depositing the excavated materials clear of work site within all leads and lifts etc including dewatering from foundation if necessary etc with supply of all labour, all taxes as per prevailing norm and T&P required for the work etc complete in all respects as directed by the Engineer-in-charge. |
| 4 | Earth work in excavation in all kinds of soil with all leads and lifts to proper slope and profile as per the requirement including the rough dressing and breaking clods to a maximum 5 to 7 cm and laying in layers not exceeding 0.23 m in depth in proper slope and profile alongwith supply of all labour and tools & plants, all materials, labourincluding all taxes as per prevailing norm & supervision charges to complete the item of work as per design, drawing and specification and as per the direction of the Engineer-in-charge. (Measurement will be taken in the finished approved level section) 1/6th volume will be deducted towards settlement for embankment only.(if mechanical excavation is done rate accordingly reduced) |
| 5 | Earth work in excavation desilting of soil with all leads and lifts to proper slope and profile as per the requirement alongwith supply of all labourincluding all taxes as per prevailing norm & supervision charges to complete the item of workas per the direction of the Engineer-in-charge. (if mechanical excavation is done rate accordingly reduced) |
| 6 | Filling foundation & plinth with excavated materials including watering & ramming to all heights with all leads & lifts with supply of all labour, all taxes as per norm and T&P required for the work etc complete in all respects as directed by the Engineer-in-charge. |
| 7 | Filling in foundation and plinth with sand well watered and rammed in layers of 23.5cm thick including cost, conveyance of materials and supply of all labour,taxes as per prvailing norm and T&P, dewatering if required for the work etc. complete and as directed by Engineer-in-charge. |
| 8 | Excavation, loading, unloading and carriage by mechanical means of all kinds of soil including stony earth, gravel and moorum etc. interspread with boulders up to 1/2 cum size with alllifts and delifts including dressing of slopes and bed to design level & section ( benching& stripping of Dam )and depositing the excavated materials away from the work site as per the specificationfrom the place of excavation including supply of all labour, all taxes as per norm, construction & maintaining haul roads required for the work etc. complete as directed by the Engineer-in-charge. |
| 9 | Providing Cement Concrete M15 grade with nominal reinforcement (excluding cost of M.S. rod, carriage and labour for cutting, bending, binding and fixing of M.S. rod) using 20mm and down, graded, crusher broken hard granite stone aggregates of approved quality quarried, free from weathered skin, quarry debris and foreign materials, using clean and sharp sand of approved grading and quality confirming to the design specifications including hoisting & lowering to all heights, watering & dewatering, laying the concrete in position to proper slope and level, compacting in layers with vibrators and finishing the exposed surface smooth, curing for required time, providing beads and grooves wherever necessary including cost, conveyance, royalty and other taxes of all materials,with all cost of tools and plant, cost and carriage of wateretc, with supply of all labour,taxes as per prvailing normand supervision Charges including mobilisation & de-mobilisation of men & machineries, T&P with all incidental Charges required for the work complete in all respect as directed by the Engineer-in-Charge. |
| 10 | Providing Reinforced Cement Concrete M20 grade for RCC works on approved surface or shape and size using 20mm and down graded crusher broken hard granite stone aggregates of approved quality quarried, free from weathered skin, quarry debris and foreign materials, clean and sharp sand of approved grading and quality confirming to the design specifications including hoisting & lowering to all heights, watering & dewatering, laying the concrete in position to proper slope and level, compacting in layers with vibrators and finishing the exposed surface smooth, curing for required time, providing beads and grooves including cost, conveyance, royalty and other taxes of all materials, ( excluding cost, carriage of M.S. rodand labour for cutting, bending, binding and fixing of M.S. rod)with all cost of tools and plant, cost and carriage of wateretc, with supply of all labour and supervision Charges including mobilisation & demobilisation of machineries, T&P with all incidental Charges required for the work complete in all respect as directed by the Engineer-in-Charge. |
| 11 | Providing rigid, smooth centering & shuttering for concrete works including false work and including cost, conveyance, royalty & other taxes of all materials required for the work complete in all respect and dismantling the same after casting and curing with water for specified period including depositing the debris clear of work site with all leads & lifts, delfts including supply of all labour, all tases as per prevailing norm and T & P required for the items etc. complete in all respect as directed by Engineer-in-charge.(for foundation & plinth)(Form work included in concrete item) |
| 12 | Supplying, fitting & placing HYSD barsreinforcement and tying the grills as per approved design & drawing and placing in position including cost, conveyance, royalty and other taxes binding wires of 18 to 20 gauge with supply of all labour,taxes as per prvailing norm and T&P required for the work etc, complete in all respect as directed by the Engineer-in-Charge. (Weight of the binding wire will not be included in the measurement for payment) |
| 13 | Fine dressing of earth work in slope of Dam & canalembankment including trimmed to required profile and turfing with best compacted dub grass sods with all leads and lifts including periodical watering with labour, all other taxes as per prevailing norm and T & P till survival of the turf etc. complete in all respect as directed by the Engineer-in-Charge. (Measurement and Payment will be made on survival of the turf. ) |
| 14 | Dismantling brick or stone masonry in clay, lime or cement mortar including stacking the useful materials for reuse and removing the debris with all leads & lifts including all labour, taxes as per prvailing norm, T & P etc. required for the item & as per direction of engineer-in-charge. |
| 15 | Dismantling and removing cement concrete including stacking the useful materials for reuse and removing the derbies with all leads & lifts including all labour, taxes as per norm, T & P etc. required for the item & as per direction of engineer-in-charge. |
| 16 | Providing weep holes in plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipes, extending through the full width of the structure with slope 1V : 20H towards draining face including cost, carriage, royalties and taxes of all materials, supply of all labour and T & P and supervision charges required for the item etc. complete in all respect as per approved design, drawing, specificiton and as per the direction of the Engineer-in-Charge. |
| 17 | Rough Stone Dry packing in approns and revetments to all height, profile and level using hard granite broken stone of 30 cm. and above size (one man stone) and above of approved quality, quarried, free from weathered skin including filling the interstices with small stone wedges including cost, conveyance, royality and other taxes of all materials, labour, all taxes as per prevailing norm and T&P alongwith supply of all labour required for the work complete in all respects as directed by the Engineer-in-Charge. |
| 18 | Supplying and laying RCC spun pipes including cost, conveyance, royalties andall taxes of RCC spun and including supply of all labour,taxes as per prvailing norm and T&P etc. to complete the work or as directed by the Engineer-in- charge. 100 MM Dia |
| 19 | Supplying and laying RCC spun pipes including cost, conveyance, royalties andall taxes of RCC spun and including supply of all labour,taxes as per prvailing norm and T&P etc. to complete the work or as directed by the Engineer-in- charge. 150 MM Dia |
| 20 | Supplying and laying RCC spun pipes including cost, conveyance, royalties andall taxes of RCC spun and including supply of all labour,taxes as per prvailing norm and T&P etc. to complete the work or as directed by the Engineer-in- charge. 300 MM Dia |
| 21 | Supplying and laying RCC spun pipes including cost, conveyance, royalties andall taxes of RCC spun and including supply of all labour,taxes as per prvailing norm and T&P etc. to complete the work or as directed by the Engineer-in- charge. 900 MM Dia |
| 22 | Removing 600mm to 900mm dia RCC hume pipe and stacking withall leads, supply of labour including earth work and dismantling of masonry work including T&P, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material complete as directed by Engineer incharge. |
| 23 | Providing 6mm thick cement plaster in cement motar (1 : 4) over cement concrete surfaces finished smooth including closed deep chipping and slury treatmentto all height,curing for required periods including cost, conveyance, royality and other taxes of all materials, labour, all taxes as per prevailing norm and T&P alongwith supply of all labouretc. complete as per the direction of the Engineer-in-charge. |
| 24 | Removing old revetment and approns and repacking with old stoneswith supply of all labour , T&P with all incidental Charges required for the work complete in all respect as directed by the Engineer-in-Charge. |
| 25 | Supply, transportation, erection, fitting and fixing approved type of moulded measuring devices (Cut Throat Flumes) of 16(sixteen) cusecs discharge capacity made out of fiberglass reinforced Plastic mould (FRP) at the specified location with \"hold fasts\" embedded in M-20 grade of concrete including curing of concrete till it attains required strength etc. as per the direction of the Engineer-in-Charge. |
| 26 | ProvidingRectangular reinforced Cement Concrete channels of sizes 30 cm x 30 cm or 40 cmx 40 cm for command area development (CAD-WM) in Cement Concrete M15 grade using 20mm down graded crusher broken hard granite stone aggregate of approved quality quarried, free from weathered skin surface and any deleterious materials using clean and sharp sand of approved grading and quality confirming to the design specifications including hoisting & lowering to all heights, watering & dewatering laying the concrete in position to proper slope and level as per the standard size and specification & model section with keys, bends, turnouts, providing contraction joints and filling with approved sealing materials including use of AEA (air entraining agent) in the concrete mix and supply of all materials, labour and machineries, compacting with plate/needle vibrator and finishing the concrete surface including excavation of channels on the approved alignment and fixing & re-fixing of alignments for the channel for laying the CAD-WM channel alongwith trimming, dressing, watering and compacting to the spoil banks to proper sectioning, providing beads and grooves etc, cutting trenches for the channels, keys as indicated in theapproved drawing, curing the concrete for the required time with supply of all materials including cost, conveyance, royality, all labour and T&P complete as directed by Engineering - in-Charge. |
AI Tender Summary
Tender Timeline
Jul 31, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedSep 01, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 01, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender