Tender For Construction Of Main Building Civil Work, Water Supply, Sanitary Work, Compound Wall And Allied Works For The Latur Dcc Bank At Satala Branch, Tq. Ahemadpur, Dist. Latur.
Tender Value
31.74 Lakhs
Estimated cost
Bid Submission
10 Aug 2021
0 days left
EMD
31800
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
SATALA → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Construction Of Main Building Civil Work, Water Supply, Sanitary Work, Compound Wall And Allied Works For The Latur Dcc Bank At Satala Branch, Tq. Ahemadpur, Dist. Latur.
BOQ
| Sl. No. | Item Description |
| 1 | CONSTRUCTIONOF BANK BRANCH BUILDING (MAIN BUILDING WORK) |
| 2 | Cleaning and preparing the the site |
| 3 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical MeansSpec No.Bd.A.1 Page No 259 SSRI.No. 21.02P.No. 131 |
| 4 | Excavation for foundation in Hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift Up to 1.50 m.) By Mechanical Means Spec No.Bd.A.3 Page No 259 SSRI.No. 21.06P.No. 131 |
| 5 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)Spec.No.: Bd.E.1 P. No. 287 SSRI.No. 24.01P.No. 150 |
| 6 | Filling in plinth and floors with Contractors hard Murum in 15 cm. to 20 cm. layers including watering and compaction etc.complete.Spec No.Bd.A.10Page No 262 SSRI.No. 21.37P.No. 134 |
| 7 | Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete.Spec No. : As directed by Engineer in chargeSSRI.No. 21.40P.No. 134 |
| 8 | Providing and laying Cast in situ/Ready Mix cement concrete M-25 oftrap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns andsteel stanchions etc. including bailing out water, Steel centering,formwork,cover blocks, laying/pumping, compaction and curingroughening the surface if special finish is to be provided (Excludingreinforcement and structural steel) etc. complete, with fully automaticmicro processor based PLC with SCADA enabled reversible Drum Typemixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fineaggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Spec.No. Bd.F.3 Page No. 298 and B.7, Page No.38 SSRI.No. 25.13P.No. 153 |
| 9 | Providing and laying Cast in situ/Ready Mix cement concrete M-20of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)Spec.No. Bd.F.5 Page No. 300 and B.7, Page.No. 38 SSRI.No. 25.13P.No. 154 Basemrnt Floor |
| 10 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Spec.No. Bd.F.6 Page No. 300 and B.7, Page No.38 SSRI.No. 25.52P.No. 155 |
| 11 | Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landingsas per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)Spec. No. : Bd.F.8 Page No. 302 and B.7, Page No.38 SSRI.No. 25.72P.No. 156 |
| 12 | Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and rougheningthem if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)Spec. No. : Bd.F.11 Page No. 304 and B.7, Page No. 38SSRI.No. 26.19P.No. 158 |
| 13 | Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks compacting , curing , finishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Spec. No. : Bd.F.9 Page No. 303 and B.7, Page No.38SSRI.No. 26.07P.No. 158 |
| 14 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.Spec. No. : Bd.F.17 Page No. 306 SSRI.No. 26.33P.No.161 |
| 15 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. |
| 16 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete |
| 17 | Providing second class HALF BRICK masonry with conventional/ Indian standard typebricks in c.m.1:4 in superstructure including striking joints, racking out joints, watering, etc. comp. Bd.G.7 Page No. 316Item No. 27.06 |
| 18 | Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete Spec. No. As Directed By Engineer in-Charge SSRI.No. 39.01 P.No.205 Basemrnt Floor |
| 19 | Providing and fixing in positionC.C.T.W. DOUBLE LEAF SHUTTER for doors and windows, incl. all fixtures and fastenings. ( as per specification) As directed by Engineer in charge. ITEM NO. 39.04 |
| 20 | Providing and fixing solid core flush door with commercial ply including painting in 3 coats, in single leaf 35mm thick as perdetailed drawing approved face veneers on both faces with / without glazing and ventetians in the postions shown on the drawings or as directed, all necessary beads, mouldings and lipping, chromium plated fixtures andfastenings on both sides and finishing complete. (without door frame). |
| 21 | Providing and fixing M 40 grade thick vibrated pull cast or similar type concreteframe with chamfer conforming to I.S. 65241983 having 6 mm dia. bars 3 Nos. And stirrups @250mm c/c and fixing in wall with 6 Nos of hold fast primer and oil painting etc, complete)frame size 60 mm x 100 mm .Item No. 39.56(E-DSR 06-11-2017) |
| 22 | Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete.Spec. No. : Bd.U.1 Page No. 537 SSRI.No. 40.01 P.No. 220 |
| 23 | Providing and fixing Mild Steel collapsible deep zinc coating, without/with ventilator, incl. all fixtures, incl. three coats of approved Oil Painting etc. complete. 20 kg/sqmBd.U.1 Page No. 537 Item no. 39.26 |
| 24 | Providing and fixing in position factory made box type steel VENTILATORS with glazed fanlight including steel windows of cold rolled section of 105mm x 60mm x 1.25mm thick frame section filled with cement concrete (1:2:4) and metal pressed steel shutters of 20 gauge (1mm) as per detailed drawing and design or as directed including providing horizontal mild steel 12mm square bars at 10cm center to center, required F-7B section, section 7-6, section 20mm x 5mm mild steel flat for shutter and F4B section for frame, 3mm thick glass of approved quality for fanlight necessary fixtures and fastening etc. complete finishing with one coat of anti-corrosive paint etc.complete |
| 25 | Providing uncoursed rubble masonry of trap/ granite/ quartzite/ gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls/ in plinth of external walls including bailing out water manually, striking joints on un exposed faces and watering etc.complete. |
| 26 | Providing internal cement plaster 20mm thick in single coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete. Item No. 32.04 |
| 27 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. Item No. 32.13 |
| 28 | Providing patti/ band 75mm wide on plastered surface 12mm to 15mm thick in C.M. 1:3 line and level including neat finishing scaffolding curing etc. complete.Item No. 32.23 |
| 29 | Providing and laying vitrified rustic / matt stone finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. Item No. 33.40 |
| 30 | Providing and laying Skirting and Dado vitrified rustic / matt stone finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for Skirting and Dado in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. Item No. 33.41 |
| 31 | Providing and laying Skirting and Dado Colour Glazed tiles decorative type of approved make, shade and pattern for Skirting and Dado in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. Item No. 33.25 |
| 32 | Providing and laying Polished Kotah Stone Trades and Risers of stair case 1:6 mix c.m. including cement float, fitting the joints with neat cement slurry, curing polishing and cleaning etc. complete. Bd.M.22 Page No. 390Item No. 33.18 |
| 33 | Providing and fixing in position (as per 1868 /1982) Alluminium sliding window of three tracks with rectangular pipe 95x38.10x0.90 mm at weight 0.637kg/Rmt. with window frame bottom track section 92x31.75x1.30mm at weight1.070kg/ Rmt.. Top and side track section 92x31.75x1.30 mm at weight0.933kg/Rmt. The shutter should be of bearing bottom 40x18x1.25mm at weight0.417kg/Rmt. Interlocking section40x18x1.10mm at weight 0.469kg/Rmt. and handle and top section 40x18x1.25 mm at weigh to.417kg/Rmt. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5mm thick plain glass and aluminium mosquito net shutter with stainless steel jali with all required screws and nuts etc, complete. With colour Anodising with box |
| 34 | Providing and applying one coat of seal cement primer of approved manufacture andshed internally including scaffolding preparing the surface complete. by cleaning dirt and other foreign matters, scrappingif necessary including scaffolding etc.(As directed by Engineer in charge) Item No. 35.22 |
| 35 | Providing and applying priming coat of seal cement primer of approved manufacture andshed for external surfaceincluding scaffolding preparing the surface complete. by cleaning dirt and other foreign matters, scrappingif necessary including scaffolding etc.(As directed by Engineer in charge) Item No. 35.22 |
| 36 | Providing and applying Pearl/ Luster finish Paint internallyof approved manufacture andshed for external surfaceincluding scaffolding preparing the surface complete. by cleaning dirt and other foreign matters, scrappingif necessary including scaffolding etc.(As directed by Engineer in charge) Item No. 35.22 |
| 37 | Providing and applying three coats of water proof weather shield cement paint of approved manufacture and of approved colour tonew plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete. 35.26 |
| 38 | WATER SUPPLY, SANITARY AND ALLIED WORKS |
| 39 | Providing and fixing on walls/ ceilings/floors in position unplasticized polyvinyl chloride (UPVC) ULTRA VOILET STABILISED 15 MM OUTER Dia plumbing pipe 3mm thick, confirming to I.S.4985-2000 & IS 7834-1987 incl. necessary fitting such as PVC bent, tee, reducers, clamps, plug etc. incl. necessary excavation, trench filling or necessary drilling holes in walls, slabs etc. and making good etc. complete. (prior approval of sample and brand by Architect is necessary before use) |
| 40 | Providing and fixing on walls/ ceilings/floors in position unplasticized polyvinyk chloride (UPVC) ULTRA VOILET STABILISED 25 MM OUTER Dia plumbing pipe 3mm thick, confirming to I.S.4985-2000 & IS 7834-1987 incl. necessary fitting such as PVC bent, tee, reducers, clamps, plug etc. incl. necessary excavation, trench filling or necessary drilling holes in walls, slabs etc. and making good etc. complete. (prior approval of sample and brand by Architect is necessary before use) |
| 41 | Providing and fixing on walls/ ceilings/floors in position unplasticized polyvinyl chloride (UPVC) ULTRA VOILET STABILISED 32 MM OUTER Dia plumbing pipe 3mm thick, confirming to I.S.4985-2000 & IS 7834-1987 incl. necessary fitting such as PVC bent, tee, reducers, clamps, plug etc. incl. necessary excavation, trench filling or necessary drilling holes in walls, slabs etc. and making good etc. complete. (prior approval of sample and brand by Architect is necessary before use) |
| 42 | Providing and fixing on walls/ ceilings/floors in position unplasticized polyvinyl chloride (UPVC) ULTRA VOILET STABILISED 40MM OUTER Dia plumbing pipe 3mm thick, confirming to I.S.4985-2000 & IS 7834-1987 incl. necessary fitting such as PVC bent, tee, reducers, clamps, plug etc. incl. necessary excavation, trench filling or necessary drilling holes in walls, slabs etc. and making good etc. complete. (prior approval of sample and brand by Architect is necessary before use) |
| 43 | Providing and fixing 15 mm. diameter WHEELED/ stop tap of brass including necessarysocket union nut complete. (conforminjg to I.S. 781)Spec. No.: Bd.V. 8 Page No. 554. |
| 44 | Providing and fixing 150mm UPVC Nahani Trap including grating, bend and piece of UPV pipe upto the outside face of the wall complete.(with 45 cm. arm) Spec. No. as directed by engineer in charge |
| 45 | Providing and fixing dressed half turn flushing cock of 25 mm. diameter of good quality with flushing pipe upto W.C. pan etc. complete |
| 46 | Providing and fixing chromium plated long body arm cock including necessary sockets complete. |
| 47 | Providing and fixing chromium plated swan tap cock including necessary sockets, nuts etc. complete. |
| 48 | Providing and fixing 1st class white glazed earthenware \"Orissa type\" W.C. pan 580 mm. x 440 mm. size including \"P\" or \"S\" trap cast iron soil and vent pipe upto the outside face of the wall (1:5:10) cement concrete bedding 50 mm. thick with fitting, inlet pipe with half turn valve 25 mm. Diameter with 25 mm. diameter G.I. flush pipe, with fitting and clamps, painting of the exposed pipes and making good walls and floor etc.complete. Spec. No. As directed by Engineer in charge |
| 49 | Providing and fixing white glazed earthenware wash Hand Basin of 470x575x190mm, size including single cold water pillar tap/ brackets, rubber plugs and brass chain, stop tap and necessary P.V.C. pipe connections including P.V.C. waste pipe and bottled trap upto theoutside face of the wall. Spec. No. Bd.V.30 Page No. 565 |
| 50 | Providing and fixing floor trap connection 75 mm. diameter unplasticized polyvinyl chloride(UPVC) ultra violet stabilized deep seal Nahani trap including P.V.C. grating confirming to I.S. 4985, rubber plug and piece of P.V.C. pipes of suitable diameter and length upto outside face of wall and making all joints water tight with providing rubber socketed packing and sealingwith suitable and durable water tight resins and making holes in masonry / concrete, redoing thesame ith cement mortar 1:4 and curing etc. complete. |
| 51 | Providing and fixing 110 mm. diameter Rain water pipes with lugs including rain water recess with necessary grating and fitting such as bends, off sets and shoe and painting with oil paint etc. complete. |
| 52 | Providing and constructing Brick Inspection Chamber 60cmx45cm and incl 1:4:8 C.C. foundation, 1:2;$ C.C. channels, half round G.S.W. pipes, brick masonry, plastering inside and airtight, 75 mm thick R.C.C. cover, etc. complete. |
| 53 | Providing and fixing reinforced cement concrete cover of size 60cm x 45 cm with frames over inspection chamber etc. complete . (Heavy duty cover having 160 Kg. /per number weight) |
| 54 | Providing and fixing H.D.P. container Syntex or alike one piece moulded water tank made out of High Density Polythuler and builtcorrugated inclusive of delivery up to destination, hoisting and fixing of accessaries such as inlet, outlet, overflow pipe, inclusive of all tanks capacity between 200 to 1000 Litres. |
| 55 | Providing and fixing a group of two white glazed earthenware lipped flat back type Urinal with inlet pipe and stop tap,bracket for fixing the cistern, lead/brass oxidised/ brass chromium plated flush pipe with fittings including lead soil pipe, lead trap and soil pipe connection upto the outside face of wall. (unit of two numbers) (Prior approval of sample and brand alike parryware/Jagwar/ Nitco/Crabtree by Executive Engineer is necessary before use ) Spec. No.:Bd.V.28 Page No. 565 |
| 56 | RWH-Shallow Percolation Pit providing, constructing 2.0m deep shallow depth percolation pit comprising of 1.0m dia precast RCC rings, 300mm thick side filling around outside of RCC rings (annula rspace) with 40mm size boulders including filling of percolation pit upto 0.5m depth (from bottom up) with 25-75mm clean washed gravels followed by 0.5m depth of 10-25mm of cleanwashed stones followed by 0.5m of washed river fine aggregate (naturals and/crushed sand VSI grade finely washed etc.) including netlon mesh between each gravel/ fine aggregate (natural sand/ crushed sand VSI grade finely washed etc.) media layer including covering with RCC slab, man hole frame & cover, PVC rung setc. including arrangement for inlet & outlet pipe, excavation & backfilling as shown in the drawing. The rate shall be inclusive of all labour, material, wastage, scaffolding, transportation, taxes, including all leads, lifts at all levels. All material should be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer in charge |
| 57 | WORK OF COMPOUND WALL AND ALIIED WORKS |
| 58 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area & stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means |
| 59 | Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Mechanical Means |
| 60 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) |
| 61 | Filling in plinth and floors with contractorsmaterial/brought from outside and approved by Engineer inchargein layers of 15cm. to 20cm.including watering and compaction etc. complete. |
| 62 | Providing and laying in situ/Ready Mixcement concreteM-20of trap / granite /quartzite/ gneissmetal for R.C.C. workin foundations like raft, strip foundations, grillage andfootings of R.C.C. columns and steel stanchionsetc. including bailing out water, formwork, laying/pumpingcover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) |
| 63 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) |
| 64 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) |
| 65 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 66 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete |
| 67 | Providing uncoursed rubble masonry of trap/ granite/ quartzite/ gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls/ in plinth of external walls including bailing out water manually, striking joints on un exposed faces and watering etc.complete. |
| 68 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. Item No. 32.13 |
| 69 | Providing and laying Rough Shahabad Stonefor flooring , of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. Item No. 33.01 |
| 70 | Providing and fixing Mild Steel Gate as per draeing and design sizes as per detailed drawing,fabricated from IS sections without hot deep zinc coating, without/with ventilator, incl. all fixtures , incl. three coats of approved Oil Painting, etc. complete. 20 kg/sqmBd.U.1 Page No. 537 Item no. 44.10 |
| 71 | Providing and applying three coats of water proof weather shield cement paint of approved manufacture and of approved colour tonew plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete. 35.26 |
AI Tender Summary
Tender Timeline
Jul 29, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedAug 10, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 12, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender