}

Redevelopment Of Sector 6 And Sector 14 Market Under Smart City Mission, Karnal-Haryana

Smart City Development Corporation Limited has published Redevelopment Of Sector 6 And Sector 14 Market Under Smart City Mission. Submission Date for this Tender is 06-08-2021. Civil Work Tenders in Karnal Haryana. Bidders can get complete Tender details and download the document.




Tender Notice

28673299
Redevelopment Of Sector 6 And Sector 14 Market Under Smart City Mission
Open Tender
Indian
Haryana
Karnal
06-08-2021

Tender Details

Redevelopment Of Sector 6 And Sector 14 Market Under Smart City Mission

Key Value

Document Fees
INR 15000 /-
EMD
INR 185000.0 /-
Tender Value
Refer document

BOQ Items

Name of Work: Redevelopment of sector 6 & 14 market under Smart City Mission (call 2)
Sl. No. Item Description
1Supply of following size XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I)3.5C x 50sqmm Al Ar cable
2Supply of following size XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I)3.5C x 35sqmm Al Ar cable
3Supply of following size XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I)4C x 16sqmm Al Ar cable
4Supplying and erecting Outdoor Stand Mounted Feeder Pillar for highmast of the same manufacturer with 63A TPN MCB incomer, single dial timer switch, 45A TP contactor for automatic switching of luminaries, 2 nos 9A contactors and raise/lower push buttons complete.(Should be supplied by same Highmast manufacturer)
5Providing and fixing 4 arm lantern carriage suitable for 9mtr height octagonal street light column holding 4nos 250W flood lights
6Supply and Installation of 250W LED flood light luminaire to be mounted on 20m Highmast, LED luminaire having Epoxy powder coated pressure die-cast aluminium housing,Weatherproof gaskets should be provided for LEDs and control gear compartments.Luinaire should be suitable for Side entry mounting for max. 38mm OD pipe bracket.The LED driver acces should be from top for easy maintenance.LEDs should be provided with non-yellowing modular secondary lens optics.LED Used shall be SMD type and fixture should have minimum efficacy at System level (Not Chip Level)>=120lumens/watt, Minimum system Lumens 5400 lm ±10%. Life of fixture 50000hrs@L70% Lumen maintenance, CCT up to 5665K ±355K, CRI>=70, PF>=0.9, THD<10%, and Operating Temperature Range-5 deg C to +45deg C, IP66. Built in Surge Protection of 4KV & external surge protection of 10kVand an operating Voltage Range of 140 to 270V AC,50Hz.Luminaire Weight should not exceed 1.5kg.The driver used is specially designed to have built-in surge voltage, open/short circuit protections.The fixture should comply with the parameters as per IS10322 and IEC60598, EMC / EMI compliance. Similar to Bajaj Cat. Ref BJFL 200W LED WHITE. LUMINAIRE MAKE : Phillips / Bajaj / Surya /Keselec. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM.
7Set stone pavement using cobble stonedriveway ramp :- this issemi grid type of pavement. Stone is set over the layer of lean concrete and crushed stone base. The sub-base should be non frost sussceptible material. Cobble granite stone 75*75 or 90*90 or 100*100 .Stone setsused in any area shall be uniform size. They shall hammer dressed on top to the extent that maximum depression of dressed surface with protected edge. There drerssing on the sides shall be simimilarly carried out.100mm cobbled stone all joints filled with pcc and bedded on 100mm thick pcc on hardcore and compacted earth
8Supply of following size XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I)4C x 25sqmm Al Ar cable
9Supplying and erecting Outdoor Stand Mounted Feeder Pillar for highmast of the same manufacturer with 63A TPN MCB incomer, single dial timer switch, 45A TP contactor for automatic switching of luminaries, 2 nos 9A contactors and raise/lower push buttons complete.(Should be supplied by same Highmast manufacturer)
10Supply and Installation of 250W LED flood light luminaire to be mounted on 20m Highmast, LED luminaire having Epoxy powder coated pressure die-cast aluminium housing,Weatherproof gaskets should be provided for LEDs and control gear compartments.Luinaire should be suitable for Side entry mounting for max. 38mm OD pipe bracket.The LED driver acces should be from top for easy maintenance.LEDs should be provided with non-yellowing modular secondary lens optics.LED Used shall be SMD type and fixture should have minimum efficacy at System level (Not Chip Level)>=120lumens/watt, Minimum system Lumens 5400 lm ±10%. Life of fixture 50000hrs@L70% Lumen maintenance, CCT up to 5665K ±355K, CRI>=70, PF>=0.9, THD<10%, and Operating Temperature Range-5 deg C to +45deg C, IP66. Built in Surge Protection of 4KV & external surge protection of 10kVand an operating Voltage Range of 140 to 270V AC,50Hz.Luminaire Weight should not exceed 1.5kg.The driver used is specially designed to have built-in surge voltage, open/short circuit protections.The fixture should comply with the parameters as per IS10322 and IEC60598, EMC / EMI compliance. Similar to Bajaj Cat. Ref BJFL 200W LED WHITE. LUMINAIRE MAKE : Phillips / Bajaj / Surya /Keselec. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail