Supply, Fixation And Commissioning Of Fabricated Structure And Uv Stablized Poly-Carbonated Sheet - Padum Zanskar Supply, Fixation And Commissioning Of Fabricated Structure And Uv Stablized Poly-Carbonated Sheet - Padum Zanskar , Padum Block , 1. Specif, Kargil-Jammu And Kashmir

Supply, Fixation And Commissioning Of Fabricated Structure And Uv Stablized Poly-Carbonated Sheet - Padum Zanskar Supply, Fixation And Commissioning Of Fabricated Structure And Uv Stablized Poly-Carbonated Sheet - Padum Zanskar , Padum Block , 1. Specification Of Proposed Green House ( Size32x18’ ) :A )   Door : Rectangular Iron Door Frame, Inner Door Dimension;5 X 2.8’ Approx; Uv Stabilized Triple Layer 16Mm Polycarbonate Sheet Panel With Hook For Supporting Extra Protective Covering For Winter.B )  Window: 3 Nos ( 2’ X 2’ Approx ) , ( 02 On Metal Frame, 1 One Side Wall ) .C ) Above Ground Metallic Frame; Ms Rectangular Hollow Pipe ( 80X25x3mm, At Approx 4’.6”-5’ Distance Between Angle To Angle Horizontally And 3’2”-3’6” Distance Vertically As Per Width Of The Polycarbonate Sheet; Joints Welded / Nut Bolt; Pipes Paint With Red Oxide And Enameled Coating. D )     Supporting Poles: Two Nos Of Metallic Supporting Poles ( 50Mm Ms Pipes ) Approx 9’ Length Above Ground; 1’ Below Ground ) To Support Gi Roof. Wielding / Nut Bolts Of Joints; Base Supporting Angles Properly Nut Bolt With Anchor Bolt; Foundation Of The Supporting Poles Should Be Of Cement Concrete, Poles To Be Fixed On Foundation Plate With Nut Bolts; Metallic Pipes Paint With Red Oxide And Enameled Coated. E ) Roofing: Roof Made Of Coloured Pre-Painted Gi Sheet Of Size 10’ X 4’ X 0.6-0.7Mm Properly Anchored And Covered With Mud Or Soil Of 5Inches Thick. Roof To Be Given Support With Truss Of Ms Pipes ( 50Mm ) . F )  Cladding Material:- Uv Stablized Triple Layer Polycarbonate Sheet, 16Mm Thick, Anti Uv Protected On Both Sides, Clear White ( Approx 64 Sq Mtr Area ) On Above Ground Metallic Frame With Extra Support Of Aluminum T Beading ( 20X3mm Width ) Fixed With Nuts And Bolts And Silicon Sealing Gaps ( If Any ) . Polycarbonate Joints Should Be On The Metallic Frame. G ) A Metallic Pipe ( 50Mm, Approx 3 Feet Length, Bend At One Side ) On One Side Of The Wall At Ground Level For Irrigation Purpose. , 2.Specification Of Proposed Green House ( 60Ft X24ft ) :A ) Door: - Rectangular Iron Door Frame, Dimension 6’X 2’8” Approx, Uv Stabilized Triple Layer16mm Polycarbonate Sheet Panel With Hook For Supporting Extra Protective Covering For Winter.B ) Window: - 4 No’S ( One No 2’X2’ Approx On Side Wall ( Three Nos 2’X2’ On Metal Frame ) With Provision For Opening.C ) Above Ground Metallic Frames:- Ms Rectangular Hollow Pipe ( 80X25x3mm ) Duly Bended In Required Shape At Approx 4.5’-5.00’ Distance Horizontally And 3.2’-3.6’ Vertically As Per Width Of The Polycarbonate Sheet, Joints Welded / Nuts Bolts: Pipes Paints With Red Oxide And Enameled Coated.D ) Vertical Poles:- Two Nos Of 50Mm Ms Supporting Poles Of Approx Size 63’ Each To Support The Roof E ) Supporting Poles:- Four Nos Of Metallic Supporting Poles Of Approx ( 50Mm Ms Pipe ) To Support Theroof ( Approx 9-10’ Height Above Ground And 1’ Underground ) And Four Nos Of Support Pole In Middle Of The Green House Structure ( Approx 6-7.5’ Height Above Ground And 1’ Underground. Welding / Nut Bolt Of Joints Base Supporting Angles Properly Bolt With Anchor Bolt.F ) Foundation Of Supporting Should Be Cement Concrete, Poles To Be Fixed On Foundation Plate With Nuts Bolts. G ) Metallic Pipes Paint With Red Oxide And Enameled Coated.H ) A Metallic Pipe ( 50Mm Approx 3 Ft Length Bend At One Side ) On One Side Of The Wall At Ground Level For Irrigation Purpose. I ) Roofing: - Roof Made Of Coloured Pre Painted Gi Sheet Of Size 10’X4’X0.6-0.7’Mm Properly Anchored And Covered With Mud Or Soil Of 5 Inches Thick Roof To Be Given Support With Truss Of Ms Pipe ( 50Mm ) .J ) Cladding Material:- Uv Stablised Triple Layer Polycarbonate Sheet 16Mm Thick Anti Uv Protected On Both Sides Clear White ( Approx 110 Sq Mtr Area ) On Above Ground Metallic Frame With Extra Support Of Aluminum T Beading ( 20X3 Mm Width ) , Fixed Nuts And Bolts And Silicon Sealing Of Gap ( If Any ) : Poly Carbonate Joints Should Be On The Metallic Frame

INR 500 /-

Refer document