Procurement Of Testing Equipments For Upgradation Of Laboratory P.- 1 Shade card winding machineIt should have following specifications:?Completely automatic, with digital display.? Single geared motor with traverse mechanism.? 10 Bobbin at a time can b

Sharing tender

Procurement Of Testing Equipments For Upgradation Of Laboratory P.- 1 Shade card winding machineIt should have following specifications:?Completely automatic, with digital display.? Single geared motor with traverse mechanism.? 10 Bobbin at a time can be used.? Provided with stand to accommodate 10 baby cones.?Has digital counter to set the number of rotations?Rust proof coating? At least 500 empty cards shall be providedOther requirements:All accessories as required (Pl Provide list of the accessories with Technical Bid)Note: Calibration certificate should be provided 2 Universal Tensile Strength Tester To determine Tensile strength and elongation of fabric, carpet and thread as per CRE principle . It should have following specifications: Instrument Detail : The instrument should be digital with window based software having automatic control of unit , user friendly interface and presentation of test reports together with data storage and retrieval with following features - Capacity -20 KN Type of loading : Axial Load cell capacity 20 KN ( measuring range 20 N to 18 KN as per DIN EN ISO 7500 ) Accuracy of load cells : Both 0.5 % & 1% as per DIN EN ISO 7500-1 Breaking Force of load cell : 300 % of the maximum load capacity of the load cell Digital Servo Drive system Page 18 of 29 IICT/Tender/Document/2020-21 Speed of the machine : 0.001 mm/min to 500 mm/min ( step less variable ) Safety Features : In built protection / control in the machine for following conditions - Load cell overall protection via software limit switch - Both hardware & software limit switch for over travel of traversing crosshead in both direction (Up & down ) - Automatic stopping & return of the machine to the original position with a click of a button - Emergency switch - Suitable Grips for testing of fabric , carpet and thread strength : Test Software : Window based software for testing , data acquisition and representation of result for CRE tests .The software should have following featureso Preparation of Test o Carrying out of test o Full statistical Analysis o Real time Graphical display o Real Time Test Results o Data Acquisition Accessories Required: All standard accessories Reference Standards : ASTM D 2256, ASTM D 5034 / IS 1969 Other requirements: All accessories as required (Pl Provide list of the accessories with Technical Bid) Note: Calibration certificate should be provided 3 Crock MeterThe instrument should conform to IS: 766/ AATCC-8/ISO X-12standards. It should have following specifications:? Diameter of the Rubbing Finger : 16 mm & 25 mm? Load on the Finger : 9 N & 20 N? Length of the Traverse : 100 ±5 mm? Counter (Re-settable) : 4-Digit Counter? Rubbing cloths: 500 pieces? Motor driven auto stopOther requirements: All accessories as required (Pl Provide list of the accessories with Technical Bid)Note: Calibration certificate should be provided 4 Pile Thickness GuageElectronic Hand operated micrometer with following specifications :? Measuring Range : 0-30 mm ? Accuracy : 0.02 mm ? Head Diameter( Pressure Foot) : 12 mm ? Lower Plate diameter(Anvil):50mm&75mm( interchangeable) ? Test Pressure : 0.5 , 1 , 2 , 5 , 10 & 20 KpaPage 21 of 29 IICT/Tender/Document/2020-21Other requirements: All accessories as required (Pl Provide list of the accessories with Technical Bid)Note: Calibration certificate should be provided 5 Tuft withdrawl TesterIt should have following specifications:? Micro-computer control, large LCD display, automatic data processing.? Professional carpet tufting clamp.? Maximum load range=120N? Power supply =AC220v+_ 10%,50HZOther requirements: All accessories as required (Pl Provide list of the accessories with Technical Bid)Note: Calibration certificate should be provided 6 Industrial Heater PressIt should have following specifications:? Laboratory model with press head size approximately 2.5 Inch X 2.5 inch? For label fusing purpose on carpet ? Digital Temperature control ? Digital Timer? Adjustable Pneumatic PressureOther requirements: All accessories as required (Pl Provide list of the accessories with Technical Bid)Note: Calibration certificate should be provided