|
| 1 | Operation & running of Pump/ Motor & valve checking of overhead tank in three shifts as per instruction of Engineer-In-Charge |
| 2 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : |
| 3 | 15 mm to 40 mm nominal bore |
| 4 | Above 40 mm nominal bore |
| 5 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : |
| 6 | 20 mm nominal bore |
| 7 | 25 mm nominal bore |
| 8 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 9 | 25 mm nominal bore |
| 10 | 40 mm nominal bore |
| 11 | 50 mm nominal bore |
| 12 | 80 mm nominal bore |
| 13 | Providing and fixing gun metal non- return valve of approved quality (screwed end) : |
| 14 | 65 mm nominal bore-Horizontal |
| 15 | 80 mm nominal bore-Horizontal |
| 16 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : |
| 17 | 15 mm nominal bore |
| 18 | 20 mm nominal bore |
| 19 | 25 mm nominal bore |
| 20 | 40 mm nominal bore |
| 21 | 65 mm nominal bore |
| 22 | 50 mm nominal bore |
| 23 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. EXTERNAL WORK |
| 24 | 15 mm nominal outer dia Pipes |
| 25 | 20 mm nominal outer dia Pipes |
| 26 | 25 mm nominal outer dia Pipes |
| 27 | 40 mm nominal outer dia Pipes |
| 28 | 50 mm nominal outer dia Pipes |
| 29 | Providing and fixing PTMT stop cock of approved quality and colour.15 mm nominal bore, 86 mm long, weighing not less than 88 gms |
| 30 | Providing and fixing brass stop cock of approved quality :15 mm nominal bore |
| 31 | Providing and fixing PTMT pillar cock of approved quality and colour-15 mm nominal bore, 107 mm long, weighing not less than 110 gms |
| 32 | Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour.15 mm nominal bore with 45 cm length |
| 33 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps |
| 34 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.10 litre capacity - White |
| 35 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:Stainless Steel AISI-304(18/8) Wash basin 530x345 mm with single 15 mm C.P. brass pillar tap |
| 36 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings :Flat back wash basin of size 630x450 mm |
| 37 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.Circular tank |
| 38 | Providing and fixing uplasticised PVC connection pipe with brass unions :45 cm length-20 mm nominal bore |
| 39 | Providing and fixing PTMT, push cock of approved quality and colour.15 mm nominal bore, 98 mm long, weighing not less than 75 gms |
| 40 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : |
| 41 | 25 to 40 mm nominal bore |
| 42 | 50 to 80 mm nominal bore |
| 43 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 44 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. |
| 45 | Providing and fixing white vitreous china water closet squatting pan (Indian type) :Orissa pattern W.C. pan of size 580x440 mm |
| 46 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore |
| 47 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
| 48 | Laying and fixing of GI pipe with fittings including trenching & refilling etc. complete as direction of Engineer-In-Charge |
| 49 | 20 mm Nominal bore |
| 50 | 25 mm Nominal bore |
| 51 | 40 mm Nominal bore |
| 52 | 50 mm Nominal bore |
| 53 | 80 mm Nominal bore |
| 54 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 55 | Total impact of GST for the purpose of CTC |
