}

Retrofitting Of Lwss Deori Palach , Lwss Tinda Sharan Bajohi Galoon Laida Tilroo , Aug Wss Dharu Ropa Sharai In Tehsil Banjar Distt Kullu H.P Sh- C/O Of Rcc Nallah Intake , Rcc Sedimentation Tank Rcc Filter Bed , C/O Storage Tank 4 Nos , 10000 Ltrs Capaci, Banjar-Himachal Pradesh

Irrigation And Public Health Department has published Retrofitting Of Lwss Deori Palach , Lwss Tinda Sharan Bajohi Galoon Laida Tilroo , Aug Wss Dharu Ropa Sharai In Tehsil Banjar Distt Kullu H.P Sh- C/O Of Rcc Nallah Intake , Rcc Sedimentation Tank Rcc Filter Bed , C/O Storage Tank 4 Nos , 10000 Ltrs Capaci. Submission Date for this Tender is 05-08-2021. Tanks and Cylinders Tenders in Banjar Himachal Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

28648558
Retrofitting Of Lwss Deori Palach , Lwss Tinda Sharan Bajohi Galoon Laida Tilroo , Aug Wss Dharu Ropa Sharai In Tehsil Banjar Distt Kullu H.P Sh- C/O Of Rcc Nallah Intake , Rcc Sedimentation Tank Rcc Filter Bed , C/O Storage Tank 4 Nos , 10000 Ltrs Capaci
Open Tender
Indian
Himachal Pradesh
Banjar
05-08-2021

Tender Details

Retrofitting Of Lwss Deori Palach , Lwss Tinda Sharan Bajohi Galoon Laida Tilroo , Aug Wss Dharu Ropa Sharai In Tehsil Banjar Distt Kullu H.P Sh- C/O Of Rcc Nallah Intake , Rcc Sedimentation Tank Rcc Filter Bed , C/O Storage Tank 4 Nos , 10000 Ltrs Capacity , Site Development , Approach Road Barbed Fencing Work Etc

Key Value

Document Fees
INR 400 /-
EMD
INR 37450.0 /-
Tender Value
INR 19.96 Lakhs /-

BOQ Items

Name of Work:- Retrofitting of LWSS Deori Palach , LWSS Tinda Sharan Bajohi Galoon Laida Tilroo , Aug. WSS Dhoru Ropa Sharaiin Tehsil BanjarDistt. Kullu (SH:-C/O RCC Nallha intake , RCC Sedimentation Tank , RCC Filter Bed , C/O Storage tank 4 Nos 10000 Ltrs Capacity , Site developement , Approach road& barbedfencing work etc. )Estimated Cost :- 1996637/-Earnest Money :- 37450/- Time :- 2 Months
Sl. No. Item Description
1Cutting in earth work and disposal of excavated earth up to lead of 20 mtrs. in all kinds of soil in pick work, jumper work and blasting work complete in all respect as per the direction and to the entire satisfaction of the Engineer-in-charge in all leads and lifts.
2Excavation in foundation and trenches etc.up to all depths and in all classification of earth work such as pick work, jumper work, saturated soil including bailing or pumping out of water, blasting soft or hard rock or chiselling / wedging out of soft/hard rock , where blasting is prohibited, in all lifts including trimming and dressing of sides, levelling of beds to correct grade including shoring, strutting , planking, timbering and dewatering where ever required. Stacking usable and unusable material /soil seperataly , returning the usable soil in 15cm layers by ramming and watering and then disposing of all surplus excavated soil/ unusable material as directed within all leads/ liftscomplete in all respects within all leads and lifts as per direction of the Engineer-in-charge.
3Providing and laying cement concrete 1:4:8 (1 cement:4 sand:8 graded crushed stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth in all leads and lifts and to the enitre satisfaction of Engineer-in- charge.
4Providing and laying cement concrete 1:5:10 (1 cement:5 sand:10 graded crushed stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth in all leads and lifts and to the enitre satisfaction of Engineer-in- charge.
5Providing and laying cement concrete 1:1.5 :3 ( 1cement: 1.5 sand: 3graded stone aggregate 20 mm nominal size )and curing complete excluding the cost of form work and reinforcement in:-
6I) Foundation and footing bases of column and like the mass concrete with in all height and depth including all leads and lifts.
7ii) Walls(any thickness but ot less than 0.1 mtr thickness) attached pilasters, buttresses, plinth and string courses etc. from top of foundation level up to floor two level.
8In lintels , beam, Girders , bressumers and cantilever upto floor two level.
9Providing and laying cement concrete 1:2:4(1cement:2sand:4graded crushed stone aggregate 20mm nominal size)and curing complete excluding cost of form work and reinforcement for reinforced work in:- suspended floor, roofs landings shelves and their supports balconies, beams, girders ,bressumers and cantilevers etc in all leads and lifts.
10Providing form work with steel plates 3.15mm thick welded with angle ironframe 30x30x5mm so as to give a fair finish including centring,shuttering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling in all heights and removal of the same for insitu -reinforced concrete and plain concrete work in :
11c) Flat surfaces such as soffits of suspended floor, roofs landings and the like floors etc upto 200mm thickness.
12Vertical surfaces such as wall (any thickness but not less than 0.1 m thickness) attached pillasters, buttresses, plinth and string courses, etc.
13Column pillers , posts and struts square , rectangular , polygonal in plan.
14Layingtor steel reinforcement for reinforced cement concrete work including bending binding and placing in position complete including the cost of binding wire in all leads and lifts.
15Providing in R.C.C smooth finishing of the exposed surface with C.M 1:3 (1 cement :3 sand )with in all leads and lifts
16Steel work welded in builtup section trusses and framed work , including cutting hoisting fixing in position and applying a priming coat of red led paint :- In beam ,Joists , Channels , Angles tees , flats with connections plates of angles clear as in main and cross beam hip and jack rafters purlin connected to common rafters & kile including all leads and lifts .
17Laying and jointing of G.I pipe for 50 mm dia( Scour pipe) with in all leads and lifts
18Providing and fixing Brass full way wheel valve50 mm dia with in all leads and lifts
19Providing and laying no fine concrete 1:4 ( 1 cement :4 graded stone aggrigate 40mm & above ) curring complete with weep holes of pours etc)
20Providing and fixing 1.80 m high barbed wire fencing with angle iron posts 2.50 mtrs high 40x40x4, 2.50 m c/c with 9 horizontals rows and 2 diagonal row of barbed wire embeded in C.C 1:4:8 ( 1 Cement :4 sand :8 graded stone agg.20 mm nominal size )with in all leads and lifts
21Providing and fixing SFRC man hole cover made with angle iron 40 x40x 3 mm thick( base frame) & 30x 30x 3 mm thick top frame coveredwith in all leads and lifts
22Providing and placing in horizontal layers filtering media duly graded, screened,cleaned and washed as specified :
23i) Top layer :- fine sand ( Eff. Size of 0.20mmto 0.40 and uniformily coefficient 2.00 to 3.00)
24II) Third layer :- Bajri 3 mm to 6 mm
25III) Third layer :- Bajri 6mm to 20mm
26III) Third layer :- Bajri 20 mm to 25 mm
27III) Bottem layerBroken stone 50mm to 75mm
28Providing and placing precast RCC slab made of Cement concrete 1:2:4 ( 1 Cement ;2 Snad :4 graded stone aggrigate 20 mm nominal size e) for resting of filter mediawithin all leads and lifts as per direction of the Engineer-in-charge.
29Providing and fixing man hole cover made with angle iron 40 x40x 3 mm thick( base frame) & 30x 30x 3 mm thick top frame covered with MS sheet 6 mm thick with locking arrangements to avoid the anti social activities ( lock with a set of 3 keys). ( Weight of man hole cover should not be less than 34 Kg)with in all leads and lifts
30Providing and laying cement concrete 1:6:12 (1 cement:6 sand:12 graded crushed stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth in all leads and lifts and to the enitre satisfaction of Engineer-in- charge.
31Providing and laying cement concrete 1:5:10(1cement:5sand:10 graded stone aggregate of 40mm nominal size) with 15% plum and curing complete excluding cost of form work in retaining walls/breast walls, the size of plums shall usually be 150mm to 300mm as per H.P.P.W.D specification including all leads and lifts
32Boulder filling behind breast wall with in all leads and lifts and to the enitre satisfaction of Engineer-in- charge.
33Providing and fixing steel gate around intake and storage tank.with in all leads and lifts
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail