|
| 1 | Supply of following Standard Solutions as per Direction of Engineer-In-Charge |
| 2 | Supply of Non ratio Turbidity Standards,NIST Traceable, Calibration kit set for TN100IR (0.02, 20, 100, 800 NTU), NIST Traceable(4X100ml = 1 unit) |
| 3 | Supply of Non Ratio 0.2 NTU Turbidity Standard, NIST Traceable(100ml = 1 unit) |
| 4 | Supply of Non Ratio 20 NTU Turbidity Standard, NIST Traceable(100ml = 1 unit) |
| 5 | Supply of Non Ratio 100 NTU Turbidity Standard, NIST Traceable(100ml = 1 unit) |
| 6 | Supply of Non Ratio 800 NTU Turbidity Standard, NIST Traceable(100ml = 1 unit) |
| 7 | Supply of Calcium Standard Solution traceable to SRM from NIST Ca(NO3)2 in HNO3 0.5mol/L Ca(100 ml = 1 unit) |
| 8 | Supply of Iron Standard Solution traceable to SRM from NIST Fe(NO3)3 in HNO3 0.5mol/L1000 mg/L Fe(100 ml = 1 unit) |
| 9 | Supply of Magnesium Standard Solution traceable to SRM from NIST Mg(NO3)2 in HNO3 0.5mol/L1000 mg/L Mg(100 ml = 1 unit) |
| 10 | Supply of Arsenic Standard Solution traceable to SRM from NIST H3AsO4in HNO3 0.5mol/L1000 mg/L As(100 ml = 1 unit) |
| 11 | Supply of Manganese Standard Solution traceable to SRM from NIST Mn(NO3)2in HNO3 0.5mol/L1000 mg/L Mn(100 ml = 1 unit) |
| 12 | Supply of Chloride Standard Solution traceable to SRM from NIST NaCl in H2O 1000 mg/L Cl(500 ml = 1 unit) |
| 13 | Supply of Nitrate Standard Solution traceable to SRM from NIST NaNO3 in H2O 1000 mg/L NO3-(500 ml = 1 unit) |
| 14 | Supply of Sulfate Standard Solution traceable to SRM from NIST Na2SO4 in H2O 1000 mg/L SO4-2(500 ml = 1 unit) |
| 15 | Supply of Potassium Dichromate solution for absorbance according to NIST-traceable(8 X 10 ml = 1 Unit) |
| 16 | Supply of Potassium Chloride solution for Stray Light Testing according to NIST-traceable(3 X 10 ml = 1 Unit) |
| 17 | Supply of Buffer Solution forpH, pH 4.0(500 ml = 1 Unit) |
| 18 | Supply of Buffer Solution forpH, pH 7.0(500 ml = 1 Unit) |
| 19 | Supply of Buffer Solution forpH, pH 10.0(500 ml = 1 Unit) |
| 20 | Supply of Conductivity Standard 1413 µS/cm, NIST Traceable (500 ml= 1 Unit) |
| 21 | Supply of Sodium carbonate volumetric standard, secondaryreference material for acidimetry, traceable to NIST (80 gm= 1 Unit) |
| 22 | Supply of Sodium Chloride volumetric standard, secondaryreference material for acidimetry, traceable to NIST (80 gm= 1 Unit) |
| 23 | Supply of Calcium carbonate volumetric standard, secondaryreference material for complexometry, traceable to NIST (50 gm= 1 Unit) |
| 24 | Supply of following Chemicals as per Direction of Engineer-In-Charge |
| 25 | Supply of Zirchonium (IV) Oxide Chloride octahydrate for analysis (100 gm = 1 unit) |
| 26 | Supply of Mac Conkey Broth, Double Strength with Neutral red (500 g = 1 unit) |
| 27 | Supply of Sodium Borohydride for analysis (500 gm = 1 unit) |
| 28 | Supply ofHydrogen Peroxide Solution for analysis (1 lit = 1 unit) |
| 29 | Supply of Spectroquant Iron Test, Range 0.005-5.00 mg/l Fe+2for analysis(1000 tests per set) |
| 30 | Supply of Silver Diethyl dithio carbamate(SDDC)(Reagent for Arsenic) for analysis(1 Unit= 5 gm) |
| 31 | Supply ofBarium Chloride dihydrate for analysis(1 Unit= 1 Kg) |
| 32 | Supply of Zinc granular extra pure, particle size approx 3-8 mm for analysis (1 Unit= 1 Kg) |
| 33 | Supply of Merckoquant Arsenic (highly sensitive) Range/graduation0.005-0.010-0.025-0.05-0.1-0.25-0.5 mg/l As3+/As5+(100 tests per set) |
| 34 | Supply of Sodium Chloride for analysis(1 Unit= 500 gm) |
| 35 | Supply of Glacial Acetic Acid 99-100 % for analysis(1 Unit= 5 Kg) |
| 36 | Supply of Ammonium Acetate for analysis(1 Unit= 5 Kg) |
