Drinking Water Related Works Under Panchayat Samiti Chhotisadri , Construction Of Tube-Well Upto 100 Meter Depth And Above In All Type Of Rocks By Dth System And Over Burden, To Accommodate Casing Pipe Of Following Sizes In All Types Of Soils And Over, Chhotisadri-Rajasthan

Drinking Water Related Works Under Panchayat Samiti Chhotisadri , Construction Of Tube-Well Upto 100 Meter Depth And Above In All Type Of Rocks By Dth System And Over Burden, To Accommodate Casing Pipe Of Following Sizes In All Types Of Soils And Over Burden Including Lowering Of Casing Pipes, But Excluding Cost Of Casing Pipes As Per Is:2800 ( Part I & Ii ) 1979 Specifications.The Work Would Be Completed After Obtaining Sand Free Water.The Tube Well Should Have A Throughout Bore As Per Nominal Dia Of Casing Pipe : , 150 Mm Dia Nominal Bore. , 200 Mm Dia Nominal Bore. , Add 15% Extra On Above Items For Drilling Depth Beyone 100 Mtr., If Depth Of Tubewell Is More Than 100 Mtr. , Supply Of Erwm.S. Black Casting Pipe Isi Marked ( Is:4270 / 1992 ) Of Grade Fe 410 Of Following Sizes At Site Of Work. , 150 Mm Nominal Bore , 200 Mm Nominal Bore , P / Laying Isi Marked P.V.C. Insulated Submersible Cable Confirming To Is:694 With Flexible Copper Conductor Including Making Connection Etc. As Required. , 1.5 Sq.Mm 3 Core Flat / Round , 2.5 Sq.Mm 3 Core Flat / Round , 4.0 Sq.Mm 3 Core Flat / Round , 6.0 Sq.Mm 3 Core Flat / Round , 10.0 Sq.Mm 3 Core Flat / Round , Providing Of Synthetic Rope For Submersible Pump Isi Marked ( Is:5175 ) Of Following Sizes. , 12Mm ( Suitable Up To 50 Mm Od Pipe ) , 16Mm ( Suitable Above 50Mm & Up To 75Mm Od Pipe ) , 20Mm ( Suitable For 90 Mm Od Pipe ) , Providing & Fixing Of Hdpe Pipe Isi Mark ( Is:4984 / 95 ) For Water Supply ( Suitable For Submersible & Jet Pump ) With Required Fittings , For Vertical Installation , 40 Mm Od6 Kg / Cm2 , 32 Mm Od6 Kg / Cm2 , 40 Mm Od10 Kg / Cm2 , S & F Tubewell Cover Of M.S. Sheet With Nuts And Bolts Completes For Casing Size 150Mm. , Supply Of Pvc Water Storage Tank With Cover , Fitting Accessories For Pvc Tank ( Upvc, Tee, Elbow, Fta, Tab, Tank Connector And Solvent Etc. ) , Fitting Accessories For Submersimble Motor Pump Set ( Adoptor, Elbow, Hose Nipple Etc. ) , Fabrication & Fixing M.S. Stand Of Specified Class Of Angle Iron L-Shaped Of 50Mm Size With Four Legs Grouted By 300*300*300Mm Cc Block M-15 In The Ground And All Legs Tied Up With Each Other Through Same Size Of Angle Iron Along With Cross Bars To Support The Bottom Of 1000 Ltr. / 2000 Ltr. Pvc Tank Complete In All Respect. , Aluminum Connection Cable 10Mm 2 Core. , Sitc Of Radial / Mixed Flow Submersible Motor Pump Sets Isi Marked ( Is:8034-1989 ) Of Approved Make With Required Accessories Including Making Connection Suitable For T.W. / D.C.B. / Open Well. The Job Includes Lowering Ofriser Pipe, G.I. / H.D.P.E. Pipe With Rope, Cables, Installation Of Complete Fitting And Accessories, Jointing Of Electrical Cables Up To Switch Board. All Labour For Testing Of Submersible Pumps Set And Supply Of Water To Water Mains, Complete In All Respect. , 100 Mm Diameter Submersible Pump Shall Have Following Hp Rating, Phase, Head, Minimum Discharge Respectively. , 1.0 Hp, 1-Ø, ( 30-78 ) Mtr, ( 46-18 ) Lpm , 1.5 Hp, 1-Ø, ( 50-130 ) Mtr, ( 46-18 ) Lpm , 1.5 Hp, 1-Ø, ( 36-71 ) Mtr, ( 100-33 ) Lpm , 2.0 Hp, 1-Ø, ( 45-89 ) Mtr, ( 100-33 ) Lpm , 2.0 Hp, 1-Ø, ( 18-51 ) Mtr, ( 180-60 ) Lpm , 3.0 Hp, 1-Ø, ( 69-125 ) Mtr, ( 110-33 ) Lpm , 3.0 Hp, 1-Ø, ( 33-90 ) Mtr, ( 166-60 ) Lpm , 5.0 Hp, 1-Ø, ( 120-220 ) Mtr, ( 100-38 ) Lpm , 5.0 Hp, 1-Ø, ( 55-150 ) Mtr, ( 166-60 ) Lpm , 3.0 Hp, 3-Ø, ( 69-125 ) Mtr, ( 110-33 ) Lpm , 3.0 Hp, 3-Ø, ( 33-90 ) Mtr, ( 166-60 ) Lpm , 5.0 Hp, 3-Ø, ( 120-220 ) Mtr, ( 100-38 ) Lpm , 5.0 Hp, 3-Ø, ( 55-150 ) Mtr, ( 166-60 ) Lpm , 150 Mm Diameter Submersible Pump Shall Havefollowing Hp Rating, Phase, Head, Minimum Discharge Respectively. , 5.0 Hp, 3-Ø, ( 33-99 ) Mtr, ( 234-84 ) Lpm , 5.0 Hp, 3-Ø, ( 32-52 ) Mtr, ( 400-167 ) Lpm , 7.5 Hp, 3-Ø, ( 65-135 ) Mtr, ( 240-115 ) Lpm , 7.5 Hp, 3-Ø, ( 45-73 ) Mtr, ( 400-280 ) Lpm , 10.0 Hp, 3-Ø, ( 93-200 ) Mtr, ( 240-60 ) Lpm , 10.0 Hp, 3-Ø, ( 64-104 ) Mtr, ( 400-167 ) Lpm , 12.5 Hp, 3-Ø, ( 96-154 ) Mtr, ( 400-120 ) Lpm , 12.5 Hp, 3-Ø, ( 77-125 ) Mtr, ( 380-167 ) Lpm , 15.0 Hp, 3-Ø, ( 90-125 ) Mtr, ( 400-167 ) Lpm , Note - Add 600 / -Rs. For Extra Stage In Single Phase Motor And 1200 / -Rs. For Extra Stage In Three Phase Motor. , Supply And Fixing Of Oil / Air Break Starter Panel Made Out Of Sheet Steelpowder Coated Enclosure Comprising Of Over Load Protection Relay, Short Circuit & Single Phasing Protection, On / Offpush Buttons, Ammeter, Voltmeter, Indicating Lamps Etc. Complete In All Respect Suitable For Following Rating Motors. , For Single Phase Submersible / Monoblockpump , 0.5 Hp To 3.0 Hp , For Three Phase Submersible / Mono Block Pump , 3.0 Hp To 10.0 Hp ( Dol ) , 3.0 Hp To 10.0 Hp ( Star / Delta ) , 12.5 Hp To 17.5 Hp ( Star / Delta ) , 20.0 Hp To 25.0 Hp ( Star / Delta ) , 30.0 Hp To 35.0 Hp ( Star / Delta ) , 40.0 Hp To 50.0 Hp ( Star / Delta ) , Supply And Fixing Of Oil / Air Breakdol / Star Deltastartermade Out Of Sheet Steelpowder Coated Enclosure Withsingle Phasing Protection, On / Offpush Buttons, Etc. Complete In All Respect Suitable For Following Rating Motors. , Dol Starter , 7.5 Hp , 10.0 Hp , 15.0 Hp , 20.0 Hp , Fully Automatic Star / Deltastarter , 3.0 Hp To 10.0 Hp , 12.5 Hp To 17.5 Hp , 20.0 Hp To 25.0 Hp , 30.0 Hp To 35.0 Hp , 40.0 Hp To 50.0 Hp , Labour Charges For Installation Of Submersible Motor Pump Set Including Lowering / Delowering Of Pipes, Cables, Accessories Etc. In Tube-Well / Open Well Complete Including T&P, Transportation Of Tripod, Chain Pulley Block & Any Other Material Required For This Purpose. , Lowering Only , Delowering And Lowering , Column Pipe 40Mm Dia With 28 Kg / Cm2 3Mtr In Length For Vertical Installation

INR 1000 /-

Refer document

Refer document

Name of Work: ??? ?? ??????? ??????? ???? ?????? ????? ?????????

Sl. No.	Item Description
1	Construction of Tube-well upto 100 Meter depth and above in all type of rocks by DTH system and over burden, to accommodate casing pipe of following sizes in all types of soils and over burden including lowering of casing pipes, but excluding cost of casing pipes as per IS:2800 (Part I & II) 1979 specifications.The work would be completed after obtaining sand free water.The tube well should have a throughout bore as per nominal dia of casing pipe :
2	150 mm dia Nominal bore.
3	200 mm dia Nominal bore.
4	Add 15% extra on above items for drilling depth beyone 100 mtr., if depth of tubewell is more than 100 mtr.
5	Supply of ERWM.S. black casting pipe ISI marked (IS:4270/1992) of grade Fe 410 of following sizes at site of work.
6	150 mm nominal bore
7	200 mm nominal bore
8	P/Laying ISI marked P.V.C. insulated submersible cable confirming to IS:694 with flexible copper conductor including making connection etc. as required.
9	1.5 Sq.mm 3 core flat / Round
10	2.5 Sq.mm 3 core flat / Round
11	4.0 Sq.mm 3 core flat / Round
12	6.0 Sq.mm 3 core flat / Round
13	10.0 Sq.mm 3 core flat / Round
14	Providing of synthetic rope for submersible pump ISI marked (IS:5175) of following sizes.
15	12mm (suitable up to 50 mm OD pipe)
16	16mm (suitable above 50mm & up to 75mm OD pipe)
17	20mm (suitable for 90 mm OD pipe)
18	Providing & Fixing of HDPE pipe ISI mark (IS:4984/95) for water supply (suitable for submersible & jet pump) with required fittings
19	for vertical installation
20	40 mm OD6 kg / cm2
21	32 mm OD6 kg / cm2
22	40 mm OD10 kg / cm2
23	S & F Tubewell cover of M.S. Sheet with nuts and bolts completes for casing size 150mm.
24	Supply of PVC water storage Tank with cover
25	Fitting Accessories for PVC Tank (UPVC, Tee, elbow, FTA, Tab, Tank Connector and solvent etc.)
26	Fitting Accessories for submersimble motor pump set (adoptor, elbow, hose nipple etc.)
27	Fabrication & Fixing M.S. stand of specified class of angle iron L-shaped of 50mm size with four legs grouted by 300*300*300mm CC Block M-15 in the ground and all legs tied up with each other through same size of angle iron along with cross bars to support the bottom of 1000 Ltr./2000 Ltr. PVC tank complete in all respect.
28	Aluminum connection cable 10mm 2 core.
29	SITC of radial / mixed flow submersible motor pump sets ISI marked (IS:8034-1989) of approved make with required accessories including making connection suitable for T.W./ D.C.B./ Open well. The job includes lowering ofriser pipe, G.I./H.D.P.E. pipe with rope, cables, installation of complete fitting and accessories, jointing of electrical cables up to switch board. All labour for testing of submersible pumps set and supply of water to water mains, complete in all respect.
30	100 mm diameter Submersible pump shall have following HP Rating, phase, Head, minimum Discharge respectively.
31	1.0 HP, 1-Ø, (30-78)Mtr, (46-18)LPM
32	1.5 HP, 1-Ø, (50-130)Mtr, (46-18)LPM
33	1.5 HP, 1-Ø, (36-71)Mtr, (100-33)LPM
34	2.0 HP, 1-Ø, (45-89)Mtr, (100-33)LPM
35	2.0 HP, 1-Ø, (18-51)Mtr, (180-60)LPM
36	3.0 HP, 1-Ø, (69-125)Mtr, (110-33)LPM
37	3.0 HP, 1-Ø, (33-90)Mtr, (166-60)LPM
38	5.0 HP, 1-Ø, (120-220)Mtr, (100-38)LPM
39	5.0 HP, 1-Ø, (55-150)Mtr, (166-60)LPM
40	3.0 HP, 3-Ø, (69-125)Mtr, (110-33)LPM
41	3.0 HP, 3-Ø, (33-90)Mtr, (166-60)LPM
42	5.0 HP, 3-Ø, (120-220)Mtr, (100-38)LPM
43	5.0 HP, 3-Ø, (55-150)Mtr, (166-60)LPM
44	150 mm diameter Submersible pump shall havefollowing HP Rating, phase, Head, minimum Discharge respectively.
45	5.0 HP, 3-Ø, (33-99)Mtr, (234-84)LPM
46	5.0 HP, 3-Ø, (32-52)Mtr, (400-167)LPM
47	7.5 HP, 3-Ø, (65-135)Mtr, (240-115)LPM
48	7.5 HP, 3-Ø, (45-73)Mtr, (400-280)LPM
49	10.0 HP, 3-Ø, (93-200)Mtr, (240-60)LPM
50	10.0 HP, 3-Ø, (64-104)Mtr, (400-167)LPM
51	12.5 HP, 3-Ø, (96-154)Mtr, (400-120)LPM
52	12.5 HP, 3-Ø, (77-125)Mtr, (380-167)LPM
53	15.0 HP, 3-Ø, (90-125)Mtr, (400-167)LPM
54	Note - Add 600/-Rs. For extra stage in single phase motor and 1200/-Rs. For extra stage in three phase motor.
55	Supply and fixing of Oil / Air break Starter panel made out of sheet steelpowder coated enclosure comprising of over load protection relay, short circuit & single phasing protection, ON / OFFpush buttons,ammeter, voltmeter, indicating lamps etc. complete in all respect suitable for following rating motors.
56	For single phase Submersible / Monoblockpump
57	0.5 HP to 3.0 HP
58	For Three phase Submersible / Mono block pump
59	3.0 HP to 10.0 HP ( DOL )
60	3.0 HP to 10.0 HP ( Star / Delta )
61	12.5 HP to 17.5 HP ( Star / Delta )
62	20.0 HP to 25.0 HP ( Star / Delta )
63	30.0 HP to 35.0 HP ( Star / Delta )
64	40.0 HP to 50.0 HP ( Star / Delta )
65	Supply and fixing of oil / Air breakDOL/ Star DeltaStartermade out of sheet steelpowder coated enclosure withsingle phasing protection, ON / OFFpush buttons,etc. complete in all respect suitable for following rating motors.
66	DOL Starter
67	7.5 HP
68	10.0 HP
69	15.0 HP
70	20.0 HP
71	Fully Automatic Star/ DeltaStarter
72	3.0 HP to 10.0 HP
73	12.5 HP to 17.5 HP
74	20.0 HP to 25.0 HP
75	30.0 HP to 35.0 HP
76	40.0 HP to 50.0 HP
77	Labour charges for installation of submersible motor pump set including lowering/ delowering of pipes, cables, accessories etc. in tube-well/ open well complete including T&P, transportation of tripod, chain pulley block & any other material required for this purpose.
78	Lowering only
79	Delowering and Lowering
80	Column pipe 40mm dia with 28 kg/cm2 3mtr in length for vertical installation