Institute Of Medical Sciences-IOMS has published Repairing And Renovation Of Paediartic Ward 1. Providing And Laying Tiles For Nicu 2. Renovation Of Mothers Room 3. Providing And Fixing Aluminum Partition With Doors 4. Extension Of Changing Room , Store And Laundry 5. Painting Of Neonatology Ward Repair. Submission Date for this Tender is 02-08-2021. Tile Flooring Tenders in As Per Tender Document Manipur. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Demolition below G.L.upto 1m depth and disposal of unserviceable materials within 50 m lead. |
| 2 | Unreinforced cement concrete upto 15 cm thickness. |
| 3 | Demolition of brick work above G.L. upto floor two level including stacking of serviceable materials and disposal of unserviceable materials within 50 m lead. |
| 4 | Filling in plinth with sandy soil under floors including watering ramming, consolidating and dressing complete. |
| 5 | Earthwork in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m |
| 6 | loose / soft soil |
| 7 | Providing and laying cement concrete in foundation and plinth excluding the cost of centering and shuttering in |
| 8 | g) 1 :4:8 (1 cem :4 c/sand :8 graded stone aggregate 40 mm nom size) |
| 9 | 2nd class (local first class) brick work in foundation and plinth in cement mortar 1:3 (1 cement: 3 fine sand) |
| 10 | Half brick masonry 2nd class (local 1st class) in cement mortar 1:3 (1 cement : 3 coarse sand) in superstructure. |
| 11 | Providing and laying in position specified grade of reinforced cement concrete,excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : |
| 12 | 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size). |
| 13 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. up to floor five level excluding cost of centering,shuttering, finishing and reinforcement : |
| 14 | 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size). |
| 15 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases up to floor five level excluding the cost of centering,shuttering, finishing and reinforcement, with |
| 16 | b) 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size). |
| 17 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete |
| 18 | Thermo-Mechanically Treated bars |
| 19 | Providing form works i/c centering and shuttering so as to give a rough finish, strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 m and removal of the same for in-situ reinforced concrete and plain concrete work in |
| 20 | ii) Sides and soffits of beams, beam haunchings, cantilevers, girders, bressumers and lintels exceeding 1m in depth. |
| 21 | Providing and fixing aluminium works for doors windows, Ventilators and partions woth extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fiixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up gaps at junctions, at top, bottom and side with required EPDM rubber/Neoprene gasket etc. Aluminium snap beading for glazing /panelling, C.P. brass/ Stainless steel screws, all complete as per architectural drawing and the directions of Engineer-in-charge.(Glazing and panelling to be paid for separately): |
| 22 | For shutters of doors, windows & ventilators including, providing and fixing hinges/ pivots and making provision for fixing of fitting wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately). |
| 23 | Anodised aluminium (anodised transparent or dyed to required shade according to IS:1868, Minimum anodic coating of grade AC 15) |
| 24 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade 1 Type II in panelling fixed in aluminium doors, windows shutters and partition frames with C.P brass/stainless steel screws etc. complete as par architectural drawing and directions of engineer-in-charge. |
| 25 | Pre-laminated particle board with decorative lamination on both |
| 26 | Providing and fixing glazing in aluminium door, windows, ventilator shutters and partitions etc. with EPDM rudder/neoprene gasket etc. complete as per the architectural drawing and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item): |
| 27 | With float glass panes of 4mm thickness |
| 28 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4(1 cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete. |
| 29 | Size of Tile 600x600 mm ( Single charged) |
| 30 | Branded |
| 31 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. |
| 32 | Size of Tile 600x600 mm ( Single charged) |
| 33 | Branded |
| 34 | Repairing to plaster i/c cutting & the patch in propershape & preparing the surface of the wall complete |
| 35 | With cement mortar 1:4 (1 cement: 4 fine sand) |
| 36 | 12 mm cement plaster 1:3 (1 cem : 3 f /sand ) |
| 37 | Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 38 | Applying one coat of cement primer of approved quality on wall surface. |
| 39 | Painting (two or more coats) with plastic emulsion paint of approved quality on new work except walls to give an even shade. |
| 40 | Painting (two or more coats) with synthetic enamel paint of approved quality of black or chocolate colour on old work to give an even shade. |
| 41 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.l.brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: |
| 42 | W.C. pan with ISI marked white solid plastic seat and lid |
| 43 | Providing and fixing laboratory sink white glazed vitreous china (Indian make) with R.S. or C.I. brackets painted white a pair of 12.5 mm C.P. brass pillar tap 323 mm rubber plugs and C.P. brass chain 32 mm C.P. brass waist of standard pattern 32 mm diameter M.I./C.P. brass traps and unions complete i/c cutting and making good the walls Indian fittings. |
| 44 | With overflow. |
| 45 | 530x430x180 mm |
| 46 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. type/ wash down type) water closet pan. |
| 47 | Providing and fixing grating of approved quality for Nahni trap. |
| 48 | Stainless Steel |
| 49 | 125 mm nominal diameter with 25 mm waste hole |
| 50 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 51 | Providing and fixing 600 x 20 mm C.P. brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C.P.brass screws (Hook type ) |
| 52 | Providing and fixing liquid soap container of glass with C.P. lid and brackets fixed to wooden cleats with C.P. brass screws. |
| 53 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. |
| 54 | 20 mm nominal outer dia Pipes |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
