Construction Of Icds Centre Awc No 19328150832 At Beech O D Munda Line 429 Bich Tg Mouza Within Malangi Gp Under Kalchini Block
Tender Value
8.17 Lakhs
Estimated cost
Bid Submission
09 Aug 2021
0 days left
EMD
16350
Bank guarantee accepted
Document Fee
800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
KALCHINI → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Icds Centre Awc No 19328150832 At Beech O D Munda Line 429 Bich Tg Mouza Within Malangi Gp Under Kalchini Block
BOQ
| Sl. No. | Item Description |
| 1 | Supply of cement approved quality at site |
| 2 | Supply of 1st class brick of all charges at site |
| 3 | Supply of tor steel of approved quality at site |
| 4 | Supply of sand including royalty and stacked at site |
| 5 | Course sand |
| 6 | Silver sand |
| 7 | Supply of coarse aggregate including royalty and stack at site, lead 25 km |
| 8 | 37.5 mm shingles |
| 9 | bazree 22.4 mm down |
| 10 | Supply of shuttering for hire chargeses at site |
| 11 | Supply of sal timber of approved quality at site |
| 12 | Supply of Gamar wood of approved quality at site |
| 13 | supply of steel window at site including all necessary fitting complete |
| 14 | 1.80m x 1.2 m |
| 15 | 0.9mx 1.2m |
| 16 | Supply of MS grill at site |
| 17 | Supply, fitting and fixing MS clamp for door and window frame made flat bent bar |
| 18 | Supply of Iron butt hinge of approved quality fitted and fixed complete. 100mmx 58mmx 1.9mm |
| 19 | Supply of anodised aluminium tower bolt of approved quality fitted and fixed complete (A) 150mm long x 10 mm dia for door |
| 20 | Supply of iron hasp bolt of approved quality fitted and fixed complete with 60mm dia road 200 mm long |
| 21 | Supply of anodised aluminium D- type handle of approved quality fitted and fixed complete (a) with continuous base plate 100 mm gripx 10mm dia rod |
| 22 | Supply of 16 gauge anneled wire site |
| 23 | Supply of polythin sheet at site |
| 24 | Supply of lime coloring material gum at site (payment to be made as per voucher) |
| 25 | supply of primer of approved quality at site (payment to be made as per voucher) |
| 26 | Supply of ready mixed paint of approved quality for timber and metal surface at site (payment to be made as per voucher) |
| 27 | Hire charged for mixture machin and vibrator (payment to be made as per voucher) |
| 28 | Supplying, Fitting & Fixing Factory made prelaminated P.V.C. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm Prelaminated PVC sheet miter cut at two corners and joined with two nos of 1.5 mm long brackets of 15 mm x15 mm M.S. square tube. The two vertical door profiles are to be reinforced with 19 mmx 19 mm M.S. Square tube of 19 gauge, weather seal to be provided through out the frame. The door frame shall be fixed with the wall using 65/100 mm M.S. Screws through the frame by using P.V.C fasteners. A minimum of 4 Nos of screws to be provided for each vertical member and minimum 2 Nos for horizontal member etc. complete as per Manufacturer?s specification and direction of Engineer-in-Charge |
| 29 | Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer\"s specification In Ground floor: (iii) Two coats |
| 30 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (A) Floor With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m (a) Area of each tile upto 0.09 Sq.m (ii) Other than Coloured decorative including white |
| 31 | Precast pierced concrete jally work as per design and manufacturer\"s specification including moulding etc. with stone chips and necessary reinforcement shuttering complete including fitting, fixing in position in all floors,(b) 37.5 mm thick panels |
| 32 | Supplying and laying chequered tiles of any shade & of approved quality with (1:1½:3) cement concrete laid in panels or patterns as directed in pavement, footpath etc. including necessary underlay 25 mm thick [avg]cement mortar (1:3) complete in all respect with all labour and materials. [Using cement slurry @ 4.4 kg/Sq.m at back side and @2.4 kg/Sq.m for joint filling], Red Variety,(i) 25 mm. thick |
| 33 | Galvanised Iron pipe outlet for water with bevelled end at outlet, supplied fitted and fixed complete including painting two coats to the exposed portion, (c) 40 mm. Dia |
| 34 | Hire and labour charges for 75 mm dia bamboo railing on Jhau/Eucalyptus or other approved timber posts 1.4 m above G.L. and 0.60 m below G. including tying strongly with coir ropes and boring holes for posts in any soil/ concrete surface/Bituminious surface packing the sides etc including cost of carriage of all materials and labour complete including cost of restoration to the damages of the ground to its original condition as per direction of Engineer in charge after removing the barricade. (Cost of restoration would be paid separately.) (a) 75mm. dia bamboo railing & 125mm. dia Jhau/Eucalyptus/other approved timber posts @ 1.60m apart, (i) Railing with 4 rows |
| 35 | Supply of UPVC pipe (B-type) and fitting conforming to IS-13592-1992 (A) (i) single socketed 3 m lingth |
| 36 | upplying fitting and fixing P.V.C. door shutter of approved quality & shade in position, the style & rail of the P.V.C. door shutter will be made of rigid P.V.C. multicavity hollow chamber of suitable size and section with 2.0 mm (+/-0.2 mm) wall thickness, the section will have 2nos. built in beads, horizontal & vertical section shall be fixed to each other by self tapping screws and 2 nos. of solid plastic or M.S. tubular galvanised brackets of length 200mmx80mm and other100mmx100mm both 1.20 mm in each corner of the shutter frame for placing hinges. Polymer based multicavity hollow section of 105 mm x37mm with 2.0 mm (+/- 0.2 mm) wall thickness will be fitted in the middle as lock rail reinforced by solid polymer bar of 200 mm long at both ends abd screws from both sides. The section frame will then be fitted in by PVC panels of size 100 mmx20 mm with wall thickness of 1.2 mm (+/- 0.2 mm) and 2 nos. of 6 mm dia and screws from both sides 6mm dia bright rod will be inserted horizontally with both side check and nut system and stretches where fixing of hinges / hasp bolt / tower bolt / door ring are required to be strong enough to with stand wear and tear. The rate is inclusive of cost of all materials, labour, and hire of tools and plants and appliencies. Carriage of all materials taxes and all other incidental chargescomplete.The rate is exclusive of cost of hinges, hasp bolt, tower bolt,door ring etc. In ground floor. |
| 37 | Sanitary & plumbing work (Work will be done as per PWD sanitary & plumbing work schedule and bill will be done accordingly) |
| 38 | Installation of hand tube well(Work will be done as per PWD sanitary & plumbing work schedule and bill will be done accordingly) |
| 39 | Display boaed and photography |
| 40 | Cost for child friendly Design & Drawing (Bala model) |
AI Tender Summary
Tender Timeline
Jul 23, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedAug 09, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 12, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender