Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | HSR CIVIL ITEMS |
| 2 | Earth work in rough excavation, banking excavated earth in layers not exceeding 20cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, lead up to 50 m and lift up to 1.5 m HSR 4.8.1 |
| 3 | 4.8.1 All kinds of soil |
| 4 | Providing and injecting chemical emulsion for PRE-CONSTRUCTIONAL anti termite treatment and creating a chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filing junction of wall and floor, along with the external perimetre of building, expansion joints surrounding of pipes and conduit etc, complete (plinth area of the building at ground floor only shall be measured) using Chlorpyriphos/ Lindane emulsifiable concentrate of 20% HSR 4.39 |
| 5 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1: 1.5:3 or richer mix (i/c equivalent cum design mix) HSR 5.23.1 |
| 6 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below HSR 5.29.1 |
| 7 | Dismantling barbed wire or flexible wire rope in fencing including kg making rolls and stacking within 50 metres lead. HSR 5.37 |
| 8 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm HSR 5.43.1 |
| 9 | 5.43.2 For thickness of tiles above 25 mm and up to 40 mm |
| 10 | Providing and laying in position cement concrete of specifiedgrade excluding the cost of centering and shuttering - All workbelow plinth level and up to Floor IV level: |
| 11 | 6.1.6, 1 :4: 8 ( 1 Cement : 4 coarse sand (zone-Ill) : 8 graded cum stone aggregate 40 mm nominal size) |
| 12 | Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centering, shuttering and finishing. 6.3.1 1:1½:3 (1 Cement: 1½ coarse sand(zone-111) graded stone aggregate 20 mm nominal size) HSR 6.3.1 |
| 13 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement-All work up to plinth level: |
| 14 | 6.14.1 1 : 1. 5: 3 ( 1 cement : 1. 5 coarse sand (zone-Ill): 3 cum graded stone aggregate 20 mm nominal size) |
| 15 | Reinforced cement concrete work in beams, suspended floors, cum roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor four level, excluding the cost of centering, shuttering, finishing and reinforcement with 1: 1.5:3 (1 cement : 1.5 coarse sand(zone-111) : 3 graded stone aggregate 20 mm nominal size). HSR 6.16 |
| 16 | Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc. HSR 6.29.2 |
| 17 | Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending,placing in position, binding, wastage, overlaps, welded joints,spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect below plinth level Note:-Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work , excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding & placing shall not bemeasured and cost of these items shall be deemed to be included in the rates for reinforcement.HSR 6.336.33.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 18 | Providing and fixing up to floor four level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, etc., including hoisting and setting in position with cement mortar 1 :3 (1 Cement : 3 coarse sand), cost of required Centering complete. HSR 6.38 6.38.1 1:1.5:3 (1 cement : 1.5 coarse sand(zone-111) : |
| 19 | Providing and fixing in position Stainless steel Grade 304 plate 1.0 mm thick as per design for expansion joints. HSR 6.606.60.2 300 mm wide. |
| 20 | Providing and fixing of expansion joint system related with floor location as per drawings and direction of Engineer-In-Charge. The joints system will be of extruded aluminium base members, self aligning/ self centering arrangement and support plates etc. as per ASTM 9221-02. The system shall be such that it provides floor to floor /floor to wall expansion control system for various vertical location in load application areas that accommodates multi directional seismic movement without stress to it\"s components. System shall consist of metal profiles with a universal aluminium base member designed to accommodate various project conditions and finish floor treatments. The cover plate shall be designed of width and thickness required to satisfy projects movement and loading requirements and secured to base members by utilizing manufacturer\"s pre-engineered self centering arrangement that freely rotates I moves in all directions. The Self - centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminium extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as per the manufactures design and as approved by Engineer -in-Charge. (Material shall confirm to ASTM 6063). HSR 6.61 |
| 21 | 6.61.1 Floor Joint of 100 mm gap |
| 22 | Providing and fixing of expansion joint system related with wall joint (internal/external) location as per drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminium base members, self aligning / centering arrangement and support plates as per ASTM B221- 02. The material shall be such that it provides an Expansion Joints System suitable for vertical wall to wall/ wall to comer application, both new and existing construction in office Buildings & complexes with no slipping down tendency amongst the components of the Joint System. The Joint System shall utilize light weight aluminium profiles exhibiting minimal exposed aluminium surfaces mechanically snap locking the multicellular to facilitate movement. (Material shall confirm to ASTM 6063). HSR 6.62 |
| 23 | 6.62.1 Wall Joint of 100 mm gap |
| 24 | Providing and fixing of expansion joint system of approved make and manufactures for various roof locations as per approved drawings and direction of Engineer-In-Charge. The joints shall be of extruded aluminium base members with, self aligning and self centering arrangement support plates as per ASTM B221-02. The system shall be such that it provides watertight roof to roof/roof to corner joint cover expansion control system that is capable of accommodating multidirectional seismic movement without stress to its components. System shall consist of metal profile that incorporates a universal aluminium base member designed to accommodate various project conditions and roof treatments. The cover plate shall be designed of width and thickness required to satisfy movement and loading requirements and secured to base members by utilizing manufacturer\"s pre engineered self-centering arrangement that freely rotates I moves in all directions. The Self centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminium extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. The Joint System shall resists damage or deterioration from the impact of falling ice, exposure to UV, airborne contaminants and occasional foot traffic from maintenance personnel. Provision of Moisture Barrier Membrane in the Joint System to have water tight joint is mandatory requirement. (Material shall confirm to ASTM 6063). HSR 6.63 |
| 25 | 6.63.1 Roof Joint of 100 mm gap |
| 26 | Providing and laying autoclaved aerated cement blocks masonry with 150mrn/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor IV level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in Charge. (The payment of RCC band and reinforcement shall be made for separately). HSR 7.51 |
| 27 | Providing and fixing of reconstituted stone tile work (IS 3622-2017-Reaffirmed) for wall Cladding up to 10 m height with special adhesive (IS 15477-2019) over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement with an admixture of pigment to match the stone shade. HSR 8.16 |
| 28 | Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with : HSR 8.19 8.19.1 Decorative veneer facings of approved manufacture |
| 29 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. HSR 8.278.27 .1 Marble work |
| 30 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. 8.27.2 Granite work |
| 31 | Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platfonn, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.HSR 8.28 |
| 32 | Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete.HSR 8.29 |
| 33 | Providing & fixing UV stabilised fibreglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated \"J\" or \"L\" hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified.HSR 9.32 9.32.2 2 mm thick flat |
| 34 | 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges 9.47.49.46.5 sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit. HSR 9.47.3 |
| 35 | Providing and laying of screed of 50 mm thick cement concrete 1 :8:16 to be laid below the topping.HSR 10.4 |
| 36 | Providing and fixing of Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 ( 1 cement : 4 coarse sand) : 10.37.1 25 mm thick HSR 10.37 |
| 37 | Providing and fixing of Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. HSR 10.38 |
| 38 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm(average) thick base of cement mortar 1 :4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. HSR 10.50 10.50.1 Polished Granite stone slab jet Black, Cherry Red, Elite Brown,Cat Eye or equivalent. |
| 39 | Providing and fixing 25 mm wooden planking, tongued and grooved in flooring, including fixing with iron screws complete with 10.54.2 Second class deodar wood |
| 40 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1 :4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete. HSR 10.59 |
| 41 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1 :3 (1 cement : 3 coarse sand) and jointing with grey cement slurry@ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. HSR 10.62 |
| 42 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1 :3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. HSR 10.63 10.63.2 Size of Tile 600x600 mm |
| 43 | Extra for grouting the joints of floor tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting/cutting in existing tiles and finishing complete as per direction of Engineer-in-charge. HSR 10.70 10.70.2 Size of Tile 500x500 mm |
| 44 | Providing and laying 100mm thick factory made cement concrete interlocking paver block of M -35 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over (BIS 15658:2006) and including 60mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. HSR 10.78 |
| 45 | 15 mm cement plaster on the rough side of single or half brick wall of mix : HSR 11.6 |
| 46 | 11.6.1 1 :4 (1 cement: 4 fine sand) |
| 47 | 1st storey |
| 48 | 2nd storey |
| 49 | Providing and fixing of chicken wire mesh for avoiding cracks in plaster with necessary nail/screws etc. complete in all respect to the entire satisfaction of engineer-in-charge HSR 11.17 |
| 50 | Providing and applying 12 mm thick (average) premixed formulated one coat gypsum lightweight plaster having additives and light weight aggregates as vermiculite/ per1ite respectively conforming to IS: 2547 (Part - 1 & II) 1976, applied on hacked / uneven background such as bare brick/ block/ RCC work on walls & ceiling at all floors and locations, finished in smooth line and level etc. complete. HSR 11.46 |
| 51 | Providing and applying two coats white cement based putty of approved brand and manufacturer, over plastered surface and grinding the surface smooth with sand paper to get en even and smooth finish including cost and carriage of all material , labour charges, scaffolding, sundries etc. complete HSR 11.58 |
| 52 | Wall painting on a cement plaster surface with acrylic emulsion paint of approved brand and manufacture to give an even shade : 11. 71.1 Two or more coats on new work |
| 53 | Preparation of ply wood surface for painting including sand papering the surface and applying filling with approved quality filler consisting of white lead, linseed oil, varnish and chalk mitti including finishing the surface to required finish complete. HSR 11.76 |
| 54 | Applying pink primer or aluminium priming coat on wood work including preparation of surface, Knotting and stopping etc.HSR 11.77 |
| 55 | Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade.HSR 11.78 |
| 56 | Melamine polishing on wood work (one or more coat).HSR 11.91 |
| 57 | Providing and fixing ISi marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. HSR 12.36 |
| 58 | 12.36.1 35 mm thick including ISi marked Stainless Steel butt hinges with necessary screws |
| 59 | 12.36.3 25 mm thick (for cupboard) including ISi marked nickel plated bright finished M.S. Piano hinges IS 3818 marked with necessary screws |
| 60 | Providing and fixing hard drawn steel wire fabric 75x25 mm mesh of weight not less than 7.75 Kg per sqm to window frames etc. including 62x19 mm beading of second class teak wood and priming coat with approved steel primer all complete.HSR 12.52 |
| 61 | Providing and fixing aluminium sliding door bolts, ISi marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : HSR 12.98 |
| 62 | 12.98.1 300x16 mm |
| 63 | 12.98.2 250x16 mm |
| 64 | Providing and fixing aluminium tower bolts, ISi marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete HSR 12.99 |
| 65 | 12.99.1 300x10 mm |
| 66 | 12.99.2 250x10 mm |
| 67 | 12.99.3 200x10 mm |
| 68 | 12.99.4 150x10 mm |
| 69 | 12.99.5 100x10 mm |
| 70 | Providing and fixing aluminium handles, ISi marked, anodised (anodic coating not less than grade AC 1 O as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete HSR 12.102 |
| 71 | 12.102.1 125 mm |
| 72 | 12.102.2 100 mm |
| 73 | Providing and fixing aluminium hanging floor door stopper, ISi marked, anodised (anodic coating not less than grade AC 1 O as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.HSR 12.103 12.103.2 Twin rubber stopper |
| 74 | Providing and fixing of roller blinds on windows complete with material and abour complete with push up & down arrangement as per approved design / colour and Engineer-in-charge. HSR 12.114 |
| 75 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc.Aluminiumsections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : HSR 12.157.1 |
| 76 | 12.157.1.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 77 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) HSR 12.157.2 |
| 78 | 12.157.2.2 Anodised aluminium (anodised transparent or kg dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) Powder coatedaluminium (minimum thickness of powder coating 50 micron) |
| 79 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): HSR 12.159 |
| 80 | 12.159.2 With float glass panes of 5 mm thickness (weight not less than sqm 12.50 kg/sqm) |
| 81 | Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M .S. Flat 15x3 mm and nuts & bolts complete. HSR 13.9 |
| 82 | 13.9.2 Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4mm aperture on both sides |
| 83 | Supply & fixing Windows frames (Chowkhats) including mullions consisting frame fabricated from sheet roll formed out of 1.2mm thick galvanized sheet as per IS:277 (Base steel as per IS 513) with zinc of 120 gm/sqm & Powder coated with pure Polyester powder up to 50 microns (as per approved colour), 3 Nos. 100mm butt - hinges 2mm thick, 6 Nos. 1.2mm thick CRCA electroplated stiffner, 6 Nos. M.S hold fast with split and tail welded to stiffner plate 200mm long, receiver for aldrop, weld less corner assembly with brackets & screws, M.S tie rod 50mm x 25mm to be fixed at bottom finished with powder coated total thickness of coating 0.6mm of approved shade, fixed in position including the cost of cement concrete for 1 :2:4 for fixing lugs complete in all respects as per drawing, design, specification & entire satisfaction of Engineer-in-charge.HSR 13.21 |
| 84 | 13.21.1 Door Frame of size 80mm x 50mm with 37mm wide single rebate for 35mm door shutter |
| 85 | 13.21.1 Door Frame of size 80mm x 50mm with 37mm wide single rebate for 35mm door shutter |
| 86 | 13.21.2 Door Frame of size 125mm x 60mm with 37mm wide double rebate for 35mm door shutter |
| 87 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.HSR 13.37 |
| 88 | 13.37.2 80x1 .20 mm M.S. laths with 1.20 mm thick top cover |
| 89 | Making holes for HCL soil / Waste pipe by core cutting up to 200 mm thick slabs and sealing with Drip seal sealant complete in all respect. 21.100 |
| 90 | 21.100.1 40 mm dia pipe |
| 91 | 21.100.2 100 mm dia pipe |
| 92 | 21.100.3 125 mm dia pipe |
| 93 | 21.100.4 150 mm dia pipe |
| 94 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement sluny mixed with water proofing cement compound consisting of applying (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofingcement compound@ 0.253 kg/ sqm This layer will be allowed to air cure for4 hours.(b) Second layer of sluny of cement @ 0.242 kg/sqm mixed with waterproofing cement compound @ 0.126 kg/sqm This layer will be allowed to aircure for 4 hours followed with water curing for 48 hours.The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. HSR 28.15 |
| 95 | Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm(b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 1 O cm.(c) third layer of 1.5 mm thickness consisting of sluny of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken up to 30 cm on parapet wall and tucked into groove in parapet all around.(d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately). For the purpose of measurement the entire treated surface will be measured. HSR 28.16 |
| 96 | Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI(solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1 :4 (1 cement : 4 coarse sand) and grouting the joints with mix of Anti shrinkage grout of approved brand up to IV floor level including rubbing and polishing of the surface up to 3 cuts complete, including providing skirting up to 150 mm height along the parapet walls in the same manner. HSR 28.43 |
| 97 | Distempering with 1st quality acrylic distemper (Ready mix) having voe content less than 50 grams/ litre of approved brand and manufacture to give an even shade: 30.25.1 Old work (one or more coats) HSR 30.25 |
| 98 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade HSR 30.38 |
| 99 | 30.38.2 Old work (One or more coats applied @ 0.83 litre/ 10sqm) over existing cement paint surface |
| 100 | 30.54 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: |
| 101 | 30.54.1 Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) |
| 102 | Cautionary sign board 900x900x900mm triangular as per IRC 67- 2012 with retro reflective Sheeting as per ASTM D 4956 09 and as per IRC 67 2012 fixed over 4mm thick aluminium Composite material (ACM) sheeting having aluminium skin thickness of 0.4 to 0.5 mm on both sided and fixing the same with suitable size aluminium alloy rivets @ 200 mm c/c to back support frame of 25x25x3mm angle iron supported on a square hollow steel section post 60x60x3.2mm conforming to IS 4923 without cost of definition plate firmly fixed to ground in foundation concrete M-25 of size 0.45x0.45x0.75m for vertical post complete as per clause 801 of MORT&H specifications. Supplier shall provide a warranty as per clause 6.9 of IRC 67-2012 for retro reflective sheeting & a certified copy of test reports including three year outdoor weathering test report for sheeting tested in India condition from an independent test laboratory conforming to clause 6.7 of IRC 67-2012Reference MORTH (Specs) 408 408 801 801 HSR 34.4 |
| 103 | 34.4.1 Using retro reflective Sheeting Class C as per IRC 67 2012 |
| 104 | 34.4.2 Using high intensity Microprisomatic grade retro reflective Sheeting Class Bas per IRC 67 2012 |
| 105 | Total HSR Civil ITEMS |
| 106 | DSR CIVIL ITEMS |
| 107 | Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron \"Y\" shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately. DSR 16.53 CP -25% |
| 108 | Total DSR CIVIL ITEMS |
| 109 | DSRPH ITEMS |
| 110 | Providing and Fixing white vitreous china extended wall mounting water closet of size 780*370*690 mm of approved shape including providing & fixing white china cistern with dual flush fitting, of flushing capacity 3ltr/6ltr. Including seat cover and cistern fittings , nuts , bolts and gasket complete DSR 2018 / 17.78 CP -20% |
| 111 | P/F white vitreous china battery based infared sensor operated urinal of approx. size 610x390x370 mm having pre & post flusing with water (250 ml & 500 ml consuption), having water inlet from back side, i/c fixing to wall with suitable bracketd all as per manufacturers specification and direction of Engineer In charge DSR 17.80/2018 CP-20% |
| 112 | P/F floor mounted ,white vitreous china single piece,double traps syphonic water closet of approved brand/make,shape,size and pattern i/c integrated white vitreous china cistern of capacity 10 litres with dual flushing system, i/c all fittings and fixtures with seat cover,cistern,fittings,nuts,bolts and gasket etc i/c making connection with the existing P/S trap, complete in all respect as per direction of Engineer in charge DSR 17.81/2018 CP -20% |
| 113 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : DSR 2018 / 18.17 CP -10% |
| 114 | DSR 18.17.1A 20 mm nominal bore |
| 115 | DSR 18.17.1 25 mm nominal bore |
| 116 | DSR 18.17.2 32 mm nominal bore |
| 117 | DSR 18.17.3 40 mm nominal bore |
| 118 | DSR 18.17.4 50 mm nominal bore |
| 119 | Total DSR PH Items |
| 120 | NS CIVIL ITEMS |
| 121 | P/F Aluminium Fittings |
| 122 | Folding Handle 100 mm |
| 123 | I Hook 150 mm long |
| 124 | Pdg & fixing S.S. 20mm dia.hanging rod heavy quality i/cwall to wall clamps of S.S complete in all respect as per direction of Engineer-in-charge.(N.S) |
| 125 | Extra for making hole in working slab for gas pipe etc i/c finishing complete NS 0% |
| 126 | Earth filling with the earth brought from outside the campus irrespective of any lead, including laying in 15cm in layers, watering and consolidating complete in all respect and fully satisfaction of Engineer-in-charge. NS CP 0% |
| 127 | Providing and fixing MS rod 10 mm dia fully threaded with nut bolt and washer inserted in aluminium section window/door shutters complete in all respect |
| 128 | Providing and fixing 25mm thick red sand stone finished both side for cup boards shelves and partition including slightly round edges complete in all respect |
| 129 | P/F Stainless Steel Hinges of Size 100 mm of 304 grade complete in all respect |
| 130 | P/F MS Hollow pipe of various sizes for gate and grills i/c welding,cutting,grinding etc complete as per standard drawings NS |
| 131 | Extra on account of labour for plaster for cornice RCC/Brick work in facia/parapet of various building in any design/ any height NS 0% |
| 132 | P/F Wood Work of modular kitchen with 19 mm ply wood with 0.80 mm thick white sun mica inside i/c SS fitting 304 grade upto a depth of cabin 1\"6\"\" to 2\"00\"\" and 25 mm thick rubber wood shutter NS CP 0% |
| 133 | P/F complete set of cup board with 19 mm ply wood with .80 mm thick white sun mica inside i/c SS fittings and front panel with teak venier of approved make wood i/c fittings etc NS CP 0% |
| 134 | P/F cladding of 4 mm thick flexible ply and 1 mm thick sunmica after making wooden frame with beading on RCC circular columnupto ceiling height complete in all respect NS 0% |
| 135 | Supply of labour for general cleaning purpose NS 0% |
| 136 | Supply of plumber for repair of leakage in bath rooms/toilet NS 0% |
| 137 | Providing JCB for levelling of earth complete in all respect NS 0% |
| 138 | Cement sand grouting using 1:3 mortar on existing tile terracing complete in all respect NS 0% |
| 139 | P/F decorative wall paper of different colour and design etc complete as per entire satisfaction of Engineer in Charge NS 0% |
| 140 | P/F main front sinage of parapet main sinage size 75\" width,5\" height consist of (a) 20 nos of acrylic letters 42\"\" height with golden acrylic on front 3\" depth(b) LED modules with 12 V module supplies(c) ACP Sheet(d) 1.25\"\" square MS iron pipe frame for board (e) 6\"\" square MS pipe for pillar, 4\"\" square MS pipe for support 50x50x6 angle & 6\"\"x2\"\"x2\"\" channels for structure (f) All MS pipe angle & channel will be black painted NS |
| 141 | Total NS CIVIL ITEMS |
| 142 | HSR PH ITEMS |
| 143 | Excavating trenches of required width for pipes, cables, etc, including excavation for sockets, depth up to 1.5 m, including getting out the excavated materials, returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layers by ramming, watering etc., stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50 m: HSR 4.16 |
| 144 | 4.16.1 All kinds of soil |
| 145 | 4.16.1.2 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia |
| 146 | Providing and laying in position cement concrete of specifiedgrade excluding the cost of centering and shuttering - All workbelow plinth level and up to Floor IV level: HSR 6.16.1.3 1 :2 :4 ( 1 Cement : 2 coarse sand (zone-Ill) : 4 graded cum stone aggregate 40 mm nominal size) |
| 147 | Constructing brick masonry inspection Chamber sizes as given below up to 0.60 metre average depth in cement mortar 1 :5 lime concrete with 40 per cent lime mortar 2:3 in foundation cement concrete 1 :2:4 benching 12mm thick cement plaster 1 :2 with a floating coat of 1 mm thick of neat cement R.C.C. 1 :2:4 slab 100 mm thick/cement concrete topping, 50mm thick: with 455mmx455mm / 455mm x610mm inside light duty C.I. inspection chamber cover and frame weight as per 1.5.1. specification painted with 3 coats of black bitumastic superior paint complete as per standard design. HSR 21.84 |
| 148 | 21.84.3 Size 600 mm X900 mm inside (with 455 mm x 455 mm cover and frame light duty single seal weighing 20 kg with R.C.C. slab) |
| 149 | Providing and fixing SFRC MANHOLE COVERS AND FRAMES MARKED WITH IS: 12592 including setting the same to correct lines and levels in 1 :3 cement sand mortar over manhole including carriage loading unloading stacking handling re-handling etc. complete in all respects to the satisfaction to the Engineer-in-charge. HSR 21.93 21.93.1 Type:- Extra Heavy Duty Set (EHD-35) 560MM Clear Opening |
| 150 | Providing salt glazed stone ware pipes grade \"A\" in standard length of 600 mm each pipe marked with IS: 651 and their lowering, cutting, jointing and testing as described in item No. 21.38, 21.39, item 21.40 induding the cost of jointing materials as well as carriage, loading, unloading, stacking, handling, re-handling etc. complete in all respects to the satisfaction of Engineer-in-charge. HSR 21.9421.94.5 300mm i/d |
| 151 | Providing and fixing Stainless Steel A ISi 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required HSR 22.1022.10.1 Kitchen sink with drain board 22.10.1.1 510x1040 mm bowl depth 250 mm |
| 152 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. HSR 22.1422.14.1 Semi rigid pipe22.14.1.1 32 mm dia |
| 153 | 22.14.1.2 40 mm dia |
| 154 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. HSR 22.85 |
| 155 | 22.85.1 15 mm nominal outer dia Pipes |
| 156 | 22.85.2 20 mm nominal outer dia Pipes |
| 157 | 22.85.3 25 mm nominal outer dia Pipes |
| 158 | 22.85.4 32 mm nominal outer dia Pipes |
| 159 | 22.85.5 40 mm nominal outer dia Pipes |
| 160 | 22.85.6 50 mm nominal outer dia Pipes |
| 161 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.HSR 22.86 |
| 162 | 22.86.1 15 mm nominal outer dia Pipes |
| 163 | 22.86.2 20 mm nominal outer dia Pipes |
| 164 | 22.86.3 25 mm nominal outer dia Pipes |
| 165 | 22.86.4 32 mm nominal outer dia Pipes |
| 166 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work.HSR 22.87 |
| 167 | 22.87.3 25 mm nominal outer dia Pipes |
| 168 | 22.87.4 32 mm nominal outer dia Pipes |
| 169 | 22.87.5 40 mm nominal outer dia Pipes |
| 170 | 22.87.6 50 mm nominal outer dia Pipes |
| 171 | 22.87.7 62.50 mm nominal inner dia Pipes |
| 172 | 22.87.8 75 mm nominal inner dia Pipes |
| 173 | 22.87.9 100 mm nominal inner dia Pipes |
| 174 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : HSR 22.94 |
| 175 | 22.94.1 15 mm nominal bor |
| 176 | 22.94.2 20 mm nominal bor |
| 177 | 22.94.3 25 mm nominal bore |
| 178 | 22.94.4 32 mm nominal bore |
| 179 | 22.94.5 40 mm nominal bore |
| 180 | 22.94.6 50 mm nominal bore |
| 181 | 22.94.7 65mm nominal bore |
| 182 | 22.94.8 80 mm nominal bore |
| 183 | 22.101 Providing and fixing Unplasticised PVC connection pipe with brass unions: |
| 184 | 22.101.2 45 cm length |
| 185 | 22.101.2.2 20 mm nominal bor |
| 186 | 22.102 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet: |
| 187 | 2.102.2 150 mm diameter |
| 188 | 22.103 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : |
| 189 | 22.103.3 25 mm nominal bore |
| 190 | 22.104 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 22.104.1 15 mm nominal bore |
| 191 | 22.105 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 22.105.1 15 mm nominal bore |
| 192 | 22.106 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 22.106.1 15 mm nominal bore |
| 193 | 22.107 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 22.107.1 15 mm nominal bor |
| 194 | 22.108 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 22.108.1 15mm nominal bore |
| 195 | 22.109 Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.HSR 22.109 |
| 196 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: |
| 197 | 22.166.1 100x100 mm size P type 22.166.1.1 With common burnt clay non-modular bricks of class designation 7 .5 |
| 198 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fittings and the base support for tank.HSR 22.181 |
| 199 | Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) including Rack Bolt Screw Pair 115mm long without CP fittings complete in all respect. HSR 22.221 22.221.2 Size 550 mm x 400 mm x 815 mm |
| 200 | Providing and fixing in position singel socket SWR UPVC soil waste or antisyph onage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. HSR 22.222 |
| 201 | 22.222.2 Single Socket Type B |
| 202 | 22.222.2.1 160mm old SWR UPVC pipe lines laid complete |
| 203 | 22.222.2.2 110mm old SWR UPVC pipe lines laid complete |
| 204 | 22.222.1.3 90mm old SWR UPVC pipe lines laid complete |
| 205 | 22.222.1.4 75mm old SWR UPVC pipe lines laid complete |
| 206 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with \"S\" or \"P\" trap including dismantling of old we seat and \"S\" or \"P\" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. HSR 30.84 |
| 207 | 30.84.2 Orissa pattern W.C Pan of size 580x440 mm |
| 208 | Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in-charge.HSR 30.89 |
| 209 | Cleaning of terrace/loft water storage tank (inside surface area) up to 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) HSR 30.90 |
| 210 | Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia up to 300mm HSR 30.91 |
| 211 | Cleaning of under ground sump, Over Head R.C.C. Tank (independent staging) including disposal of silt and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:-(i)Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits.(ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water.(iii) Chlorination of RCC internal surface by liquid chlorine.(iv) The treated surface shall be dried using air jetting and allloose particles shall be removal from the surface.(v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge. HSR 30.92 |
| 212 | Total HSR PH ITEMS |
| 213 | NS PH ITEMS |
| 214 | Pdg. & fixingSWR UPVC pipe classic type ‘B’ and specials ISI marked (Kissan, Prince, Finolex make) including fitting joint solvent mixture complete in all respect- |
| 215 | Specials for 110mm dia pipe |
| 216 | i) Cowel |
| 217 | ii) Clamp |
| 218 | iii) Plain Bend |
| 219 | iv) P-trap |
| 220 | v) socket |
| 221 | vi) single junction with door |
| 222 | b)90mm dia pipe |
| 223 | i) Cowel |
| 224 | ii) clamp |
| 225 | iii) Bend |
| 226 | iv) socket |
| 227 | v) single junction with door |
| 228 | vi) Floor trap |
| 229 | Pdg. and fixing in position CP jali ( brass ) of heavy quality,100mm dia of standard make approved by Engineer Incharge, complete in all respect (make, Viking, Chilly, Camry)N.S. |
| 230 | P/F of looking mirror 6 mm thick BEVELLED on side fixing in position with necessary CP stud screws and washers complete (make Saint Gobin) its complete in all respect. |
| 231 | P/F 20 mm dia Tank Nipple of Approved make entire satifaction of Engineer In charge NS |
| 232 | Total PH NS Items |
| 233 | HSR ELECTRICAL |
| 234 | Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:-(HSR - 23.22.5) |
| 235 | 1. 6 amp. to 32 amp Single Pole |
| 236 | 4. 40 amp to 63 amp. Double pole |
| 237 | 6. 40 amp to 63 amp. MCB\"s TRIPLE POLE |
| 238 | 8. 40 amp to 63 amp. MCB\"s FOUR POLE |
| 239 | Providing and fixing Piano type accessories of approved make in existing box and Bakelite sheet including fixing and making necessary connections, complete in all respect. (HSR-23.8.1)12) Bakelite angle/straight button holder large size. |
| 240 | EARTHING AND LIGHTENING ARRESTOR (HSR 24.1) |
| 241 | 1) Earthing with GL earth pipe 4.5 m long and 40 mm dia with masonryenclosures on the top etc. (but without charcoal or coke and salt) asrequired. |
| 242 | 2) Extra for using salt and char coal/coke for pipe earth electrode as required |
| 243 | 6) Supplying and laying 25mm x 3mm G.I. strip at 0.5 metre below ground as strip earth electrode including soldering etc. as required. |
| 244 | Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in existing MS/PVC Conduit etc as required.(HSR-23.5.6 ) |
| 245 | 1) 1 run of Size 1.50 Sqmm(1/1.40mm) |
| 246 | 3) 1 run of Size 4 Sqmm(1/2.24mm). |
| 247 | 5) 1 run of Size 10 Sqmm(1/3.50 mm) |
| 248 | Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. (HSR 23.22.4) |
| 249 | 3) SPN DB Double Door 12 way ( 2 incoming and 10 outgoing) |
| 250 | 9) Vertical TPN DB Double Door 4 way ( 8 incoming and3phase*4 outgoing) |
| 251 | Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. (HSR- 23.8.11) |
| 252 | 1) 5 amp 1 way switch |
| 253 | 3) 15 amp 1 way switch |
| 254 | 4) 5 amp Socket |
| 255 | 5) 15 amp 6 pin Socket |
| 256 | 7)step type Fan Regulator 2 modules 300 watt |
| 257 | 8) Telephone Socket outlet modular type |
| 258 | 10) Blanking plate |
| 259 | 11) RJ 45 Computer DATA socket outlet for CAT 6 or CAT6e cableModular type |
| 260 | Providing and fixing GI concealed sheet metal boxes with inner and outer surface plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. ( HSR - 23.8.10 ) |
| 261 | 1) 1 & 2 Modules including combined plate for Telephone and data |
| 262 | 2) 3 Modules |
| 263 | 4) 6 Modules |
| 264 | 5) 8 Modules |
| 265 | 6) 12 Modules |
| 266 | Supply and Fixing 3 mm thick Bakelite sheet cover on existing MS/PVC junction box/tee etc including fixing with brass screws and washers. (HSR-23.8.12) |
| 267 | MCCB ,DISTRIBUTION BOARDS, MCB\"s, RCCB\"s, CHANGE OVER etc (HSR-23.22) |
| 268 | Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. (HSR- 23.22.1) |
| 269 | 9) 4 pole MCCB 6 amp to 100 amp , 25 KA |
| 270 | 10) 4 pole MCCB 125 to 160 amp, 25 KA |
| 271 | Making suitable hole in the wall suitable for exhaust fan up to 450 mm sweep including finishing the same and fixing of Stainless steel wire mesh 2 mm thick having about 50 meshes per inch at exhaust side complete as required (HSR-23.11) |
| 272 | Supply, erection and fixing of 12 mm thick ply wood board having a circular /rectangular hole etc as required including the cost of making hole, nuts and bolts, painting and other petty material with all labour etc. complete in all respect up to the entire satisfaction of Engineer-in-charge of the work. (HSR-23.13) |
| 273 | Supply and erection of U- PVC Trunking/Channel of following size including cost of fixing on wall, floor and ceiling etc. with required material complete the job in all respect up to entire satisfaction of the Engineer-in-charge of work. (HSR-23.23.5) |
| 274 | 1) 25x 12 mm |
| 275 | 2) 38x 12 mm |
| 276 | Supply and laying of multicore telephone cable conductor size 0.51 mm bright annealed copper conductor PVC insulated and sealed in existing pipe/channel and making necessary connection complete in all respect up to the entire satisfaction of the Engineer-in charge of the work. (HSR- 23.23.8) |
| 277 | 1) 2 pair telephone wire |
| 278 | 2) 4 pair telephone wire |
| 279 | Supplying and drawing of 1 no UTP 4 pair CAT 6 LAN Cable in the existing surface/recess MS/PVC conduit as required (HSR- 23.23.9) |
| 280 | Supply and fixing Galvanised Iron flexible pipe complete with socket nipples and check nuts etc. at both ends (Up to length of one metre):- (HSR-23.23.1) |
| 281 | 1) Size 15 mm dia |
| 282 | 2) Size 25 mm dia |
| 283 | Supply and jointing three core submersible flat cables of approved make with bare bunched copper conductor insulated and sheathed with PVC for submersible pump motors /fountain lights etc with voltage grade 1100 volts marked with IS:694, 1990 including cost of jointing, materials as well as carriage, loading, unloading etc. complete in all respect up to the entire satisfaction of Engineer- in-Charge. (HSR-24.5.1) |
| 284 | 1) Submersible Copper Cable 3 Core 1.5 sqmm |
| 285 | Supply and erection of PVC CONDUIT ISI marked (Medium) recessed in walVceiling etc. including the cost of PVC bends, inspection boxes, iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in-Charge of work. (HSR-23.7.6) |
| 286 | Note: The rates worked out for items 23.1 to 23.7 and their sub-items are by considering recessed conduit wiring. These rates may be reduced by 15% wherever surface conduiting wiring is required to be done as per directions of Engineer-in-Charge. |
| 287 | 1) PVC pipe of 20 mm dia. |
| 288 | 2) PVC pipe of 25 mm dia. |
| 289 | HSR Amount |
| 290 | NS Electrical |
| 291 | Supply and erection of ISImarked propeller type ventilation fans (Exhaust fan)Size 300 mm, 1400 rpm Heavy Duty suitable for single phase A.C. 230 Volts, 50 HZ supply, A.C capacitor run conferming to IS:23/2/67 , complete with mounting ring with four no.s fixing holes without regulator as per rate contract specifications.with all labour and petty material required.(Havell\"s - Make & Model -Torboforce or Cormpton Greaves). model heavy duty |
| 292 | Supply and erection of 300 mm aluminium anodized louver shutter for exhaust fan (Thickness of frame 1.00 mm & blade thickness 0.80 mm) including all labour and other petty material required to complete the job. (Canon, National-Make) |
| 293 | S/E of fresh air fans (Exhaust fan) 250mm sweep PVC body with louver shutter, suitable for single phase A.C. 230 Volts, 50 HZ supply complete with all labour and petty material required to complete the job. (Havell\"s-Make & Model-Ventlair DX / Crompton Greaves-Make & Model-Brisk Air) |
| 294 | Supply and erection of surface/ Recessed mounting, energy efficient LED 6000 K round luminaire, complete with diffuser, HF electronic driver and other material required to complete the job including fixing the same in false ceiling with required material & making necessary connections etc :- Make as per brand list |
| 295 | i) LED 15/18 W Square/Round Fitting |
| 296 | ii) LED 34/36 W 2\"x2\" Square Fitting |
| 297 | S/E of ceiling fan 1200mm of 2 star rating w/oregulator complete with blades, canopies, shackles down rod suitablefor AC 230 V, 50 HZwith petty materials required to complete the job.(Make-Havells & Model 2 Star ES50 NEO White or approved brand list HPHC) |
| 298 | Supply, installation, testing and commissioning of 50/60 watt LED Flood Light luminairewith IP-66 Protection and made in pressure die cast and heat shrink aluminium extrusion with high power LEDs as light sourceto be mount on existing building/ terrace complete in all respect.suitable for operation on 230 volts A.C supply. As per brand list |
| 299 | Supply, installation, testing and commissioning of 10W LED Bulkhead light fixture with necessary driver lamp, connections, wiring & etc. complying to IP 65 class of protectioncomplete as required. Make as per brand list |
| 300 | Supply and erection of surface mounting LED Batten fitting 1x 18 watt, (4 feet long), made of high grade poly carbonate body provided for efficient heat dissipation & integrated electronic driver suitable for single phase A.C. 230 Volts, 50 HZ supply, complete in all respect. Make as per brand list |
| 301 | Supply and erection of surface mounting LED Batten fitting 1x 10 watt, (2 feet long), made of high grade poly carbonate body provided for efficient heat dissipation & integrated electronic driver suitable for single phase A.C. 230 Volts, 50 HZ supply, complete in all respect.Make as per brand list |
| 302 | S/I/T/C of water cooler stainless steel body with 150 ltr /hr and 150 ltr storage capacity (USHA,Sidwal,Voltas Make) complete in all respect i/c all labour and petty material.Make as per brand list |
| 303 | Supply &Erection ofCommercial Mineral RO systemof 40 Ltr/ hr. water Purification Capacityi/c fixing on wall with all petty material and labour reqd. (Make-Kent & Model-Elite-1 mineral RO-1052equivallent make in) Make as per brand list |
| 304 | Supply, installation, testing and commissioning of 70W LED Highbay light fixture with necessary driver, lamp, connections, wiring & etc. complete as required.(Crompton Model - LHB11-70-CDL/60 or equivalent model of Makes as per approved brand list) |
| 305 | Supply, installation, testing and commissioning of 180/200 watt LED Flood Light luminairewith IP-66 Protection and minimum 100 lumes/watt made in pressure die cast and heat shrink aluminium extrusion with high power LEDs as light sourceto be mount on existing building/ terrace complete in all respect.suitable for operation on 230 volts A.C supply. Make as per brand list |
| 306 | Supply & Erection of Post -Top Lantern luninaire with mashroom shape opal diffuser mounted on cast aluminium capsule complete with 45 watt LED, fixed on existing pole including making necessary conneciton, nuts and bolts and labour etc. (NS item)Make as per brand list |
| 307 | Supply, Testing & Commissioning of wall fan 16\" sweep (400mm) Oscillating type complete with built-in regulator (PLATINA-Havells make/ Crompton Greaves Make & Model High FLO-LG white). The fan is to fixed on wall with suitable fixing arrangement including connection from nearest light point with cost of Cu wire required. |
| 308 | EI NS-Total Amount |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
