|
| 1 | Supply and fix in repairs PVC U-Pipe 160 mm having pressure capacity of 10 kgf/cm2 , ISI marked, Class 5 including all accessories like Tee, bends, connectors, End cap, mechanical joints,etc complete including taking down all as specified and directed by Engineer-in-charge. |
| 2 | Supply and fix in repairs PVC U-Pipe 63 mm having pressure capacity of 10 kgf/cm2 , ISI marked including all accessories like Tee, bends, connectors, End cap, mechanical joints,etc complete including taking down as per site requirement and existing site all as specified and directed by Engineer-in-charge. |
| 3 | Supply and fix in repairs U-PVC butterfly/ball valve 63 mm having pressure capacity of 6 kgf/cm2 , ISI markedincluding all accessories like bends, connectors, cap,etc complete including taking down all as specified and directed by Engineer-in-charge. |
| 4 | M&L for lifting the pebbles of size 20mm from the field and placing them safely nearby and again lifting the pebbles and place them evenly on the very field they were taken including placing charcoal near sprinkler as per existing setup complete all as specified and directed by Engineer-in-charge. |
| 5 | Supply and fix in repairs cable PVC isulated and PVC sheathed1100 volt gradecopper conductor 2.5 Sqmm 4 core complete including taking down. |
| 6 | M&L for taking out old corroded/ broken ladder out of sumps and refixing the same after repairing the ladder with the help of Arc/Gas welding,cutting, changing of iron pieces,change of corroded parts with new one, etc after that doing two coats of anti corrosivce bitumious paint over a coat of anti corrosive primer complete all as specified & directed by Engineer-in-charge. |
| 7 | Supply and fix in repairs perforated pre painted M.S cable tray with perforation not more than 17.5 % in convenient sections joined with connectors including nuts, bolts, etc complete including taking down of size 150 mm width and height 50 mm. |
| 8 | M&L dewatering, cleaning of sewage water collection U/G tanks with high pressure jet to remove all mosses, algae and dirt and removal of dirty water along with sludge machines/industrial vacum cleaners and disposal of the same to a safe distance including scrubing of internal surface by steel wire brush, removing the dirt completely using industrial vaccum cleaners and sterilizing the complete internal surface of the tank by using ISI mark Gd I bleaching powder and marking the date of cleaning by using synthetic enamel paint in white colour over black background and letters of height 40 mm height and 30 mm width complete all as directed for the following sizes:- |
| 9 | 15 x 10 x 2 m |
| 10 | 20 x 10 x 2 m |
| 11 | M&L dewatering, cleaning of sewage water collection U/G tanks with high pressure jet to remove all mosses, algae and dirt and removal of dirty water along with sludge machines/industrial vacum cleaners and disposal of the same to a safe distance including scrubing of internal surface by steel wire brush, removing the dirt completely using industrial vaccum cleaners and sterilizing the complete internal surface of the tank by using ISI mark Gd I bleaching powder and marking the date of cleaning by using synthetic enamel paint in white colour over black background and letters of height 40 mm height and 30 mm width complete all as directed for the following size of 50000 Gallons. |
| 12 | M&L dewatering, cleaning of sewage collection U/G tanks (approx depth of tank around 20 m of capacity 1.4 MLD) with high pressure jet to remove all mosses, algae and dirt and removal of dirty water along with sludge machines/industrial vacum cleaners and disposal of the same to a safe distance including scrubing of internal surface by steel wire brush, removing the dirt completely using industrial vaccum cleaners complete and marking the date of cleaning by using synthetic enamel paint in white colour over black background and letters of height 40 mm height and 30 mm width complete all as directed |
| 13 | M&L in replacement of GI pipe medium grade 6\" bore with welded heavy duty flanges at both ends complete including taking down all as specified & directed by Engineer-in-charge |
| 14 | M&L in replacement of GI pipe bend 90 degree medium grade 6\" bore with welded heavy duty flanges at both ends complete including taking down all as specified & directed by Engineer-in-charge°. |
| 15 | M&L for cleaning of STP and surrounding area by surface excavation upto 10 cm depth incl removing shrubs,grass,miniplants and other unwanted materials and levelling complete in soft/loose soil all as specified and directed. |
| 16 | Supply and fix in repairs energy saving envorimental friendly, long life, exclusive innovative die cast aluminium IP 65 food light with high power LED as light source, suitable for 150 watts for high mast fittings including climbing on high mast and wiring complete including taking down all as specified by EIC. |
| 17 | Construction of valve chamber of size 120 x 120 x 120 cm (internal dimensions) with the following specifications :-(i) 15cm thick PCC 1:4:8 type D-2 (using stone aggregate) as in foundation concrete.(ii) PCC solid block masonry 200mm thick using grade C-5 block in CM 1:6(iii)Rendering 15mm thick in CM 1:4 finished even and fair.(iv)PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in coping.(v) 3mm thick MS sheet cover alongwith MS angle iron frame 40 x 40x 6 mm duly embedded in coping concrete with necessary locking arrangement.(vi)Painting MS sheet cover and frame with two coats of synthetic enamel paint over a coat of red oxide primer. |
| 18 | Supply & lay GI tubing \"\"light grade\"\" for protection of cable and fixing to existing pole with flat iron clamp 25x3 mm including nut bolts and washer etc complete including taking down orlaying in trenches of 50 mm bore including taking down the old GI tubing. |
| 19 | Supply and fix in repairs FRP junction box light weight suitable for pole mounting including MCB SP 6 Amps single pole and necasry connector for loop in loop out cable connection and suitable size glands of size 250 x200x100mm Make: Sintex |
| 20 | M&L forscrapping existing deteriorated old aluminium paint by brushingand painting of PCC poles of 8.5/9.0 mtr length with aluminium paint on (two coats) including cross arms, angles, nut, bolts, clamps & junction box all as required on site (pattern will be decided by Engr-in-charge) and directed by Engr-in-Charge. |
| 21 | M & L bore earthing not less than 250 mm dia 16 feet deep filled with black soil up to 7 feet from bottom complete with galvanized iron pipe40 mm bore medium grade 3 meter long tapers at bottom & provided 12 mm holes (staggered) at 75 mm centre to centre up to 2.5 meter of length from bottom , burried directly in ground filled with 45 cm alternate layer of chemical magnisium sulphate & salt up to ground levl connected to galvanized iron strip 25 x 4 mm as earthing lead by means of bolt and nut, check nuts and washer of galvanized iron or steel including brazing workand 40mm dia light grade pipe for earth lead protection and testing on completion complete all as specified and directed. (NOTE:-GI earth strip and protection pipe beyond 7.5m will be measured and paid separately) |
| 22 | M&L for main earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or burried in ground or drawn in conduit /pipe or fixed to pole or any other indicated situation for loop earthing etc of galvanised strip 25x4 mm. |
| 23 | S&Fin repairs Hightly efficient IP 66 and IS-10322/IEC-60598 LED Street light with aluminium presssure dia cast housing to tughened glass in the front and peanut lens for batwing light distribution with integral electronic constant currnet driver, PF= 0.95 and system efficacy =100 and CRI = 70 suitable for 70 wattage complete including taking down all as specifed and directed by Engr-in-Charge.Make : (Make:-Havells Cat Pt No.LHETBXU7PA7B070/Orient/Philips).Note :- LM80 certificate to be produced for the LED fitting at the time of RAR. |
| 24 | S & Fixing in repair security light bracket with GI pipe medium grade of size 40mm dia bent to shape of length 1.2 meterincluding flat iron clamp made of GI 40 mm x 6 mm, nuts, bolts, washers etc duly painted with two coat of synthetic enamel paint over a coat of red oxide primer complete including taking down. |
| 25 | Supply, lay, test connecting and commissioning armoured underground cable LT 1100 volt grade heavy duty XLPE insulated with aluminum stranded conductor complete laid in trenches/fixed to poles /drawn through pipes with suitable size cable glands criping type cable lugs etc including taking up unserviceable underground cable from trench/pole/wall etcall as specified and directed of follwing sizes:- |
| 26 | 16 sqmm 4 core |
| 27 | 25 Sqmm 3.5 core |
| 28 | Supply & fix in replacement timer switch box fabricated out of 16SWG CRCA sheet with mounting arrangement duly power coated consisting of following.(a) Timer FM QT-1 Make L&T/Havells- 01 No(b) Power contactor 80 Amps L&T/Havells- 01 No(c) Connector 100 Amps rating 230 volts -03 Nos(d) MCB 4 pole 100 Amps 415 Volts-01 No( e)Control fuse 2 Amp - 01 Nos |
| 29 | M&L for lifting the Non-clog sewage pumps of size 10 HP - 02 Nos and 7.5 HP- 04 Nos from the sump and placing them safely nearby and again lifting the sewage pumps after required servicing and place them as their respective places with all proper attachments, nuts,bolts,etc and including testing the same for same efficiency of pumps complete all as specifed by EIC. |
| 30 | M&L for servicing of high mast pole and drums of 16 m height including replacement of worn out parts i.e SS wire rope, trailing cable, connector,integral power tool motor, manual handle, junction box,lightening finial.Wiring material,power cables between panel and mast, MCB in base compartment, mounting clamps and bolts , luminary mounting bolts and including main panel of high mast etc complete making functional in all respect including taking down all as specified by EIC.Note: Replacement of LED flood lights is catered here-in-above item. |
| 31 | Supply & Fix in replacement PVC insulted sheathed wire with copper conductor flexible 2 core 2.5 Sq mm complete including taking down. |
| 32 | Design, fabricate, supply, installing, testing and commissioning ofLT distribution panel board outdoor type in replacement, IP 54 and all as per IE rules, prewired, and fabricated out of 3.15 mm thick CRCA sheet double door with aprons, dust, vermin, weather proof duly powder coatedmounted on suitable size MS iron angle frame 50 x 50 x 6 mm welded in shape with two coats of enamel paints over a coat of red oxide primer including necessary grouting in PCC 1:3:6 type C-1 with 20 mm grade stone aggregate complete with legs 30 cm in ground in PCC and 40 cm above ground, including connecting to cable with cable glands, lugs etc. including taking down LT panel and consisting of the following:-(a)Aluminium bus bar 400 Amps - 03 Nos forphases and - 01 No for neutral duly colour sleeved mounted on epoxy insulator - 01 set(b)Incoming MCCB 4 pole 200 Amps 25 KA, 415 V - 01 No(c)Outgoing MCCB 63 Amp 4 pole 16 KA, 415 V - 04 Nos(d)Digital Ammeter 0-400 amps with suitable CT\"s & selector switch - 01 No(e)Digital Voltmeter 0-600 Volts with selector switch - 01 Nos(f) Indicating lamp set R Y B-01 setLED type |
| 33 | Dismantling & taking down centrifugal pump set from plate form and disconnecting suction & delivery pipe line & electrical connections, transport the same to workshop for repair(i.e machining,work, welding, grinding, turning & polishing etc.) and after repairing transporting the pump set from workshop to site, installation at site connecting suction & delivery pipe and electrical connection complete including taking down all as directed by Engineer-in-charge for following pumps capacity .NOTE:-(i)The rate is deemed to be included the cost of providing foundation nuts, bolts & washers gland packing, greasing, oiling and oil sheet gasket. (ii) The spare partswill be measured and paid separately under relevent items of Sch \"A\" as supply only. |
| 34 | (a) 20 HP |
| 35 | Supply only following parts for item No. 33.00 of 20 HP capacity centrifugal pump sets. |
| 36 | Bronze Impeller |
| 37 | Casing Ring |
| 38 | Impeller ringbrass nut |
| 39 | Impeller key |
| 40 | Coupling key |
| 41 | Coupling rubber bushes/ Tyre coupling |
| 42 | Shaft sleeve (Steel) |
| 43 | Bearing |
| 44 | Brass Bush |
| 45 | Gland cap CI |
| 46 | Gland bolt/ nut |
| 47 | Shaft |
| 48 | Taking down the motor from base plate/ pump after disconnecting the electrical connection andtransporting to & from workshop for cutting & taking burn out copper winding complete and cleaning properly. Rewinding the motor with same gauge, best quality copper enamelled winding wire and packing properly with packing materials, varnishings, drying & replacing wornout bearing/terminal plate, reassembling, fixing in original position, testing & commissioning complete of following sizes all as directed by Engineer-in-charge(Note :Supply only bearings and terminal plates will be measured and paid separetely under under respective item of this schedule) |
| 49 | (a) 20 HP |
| 50 | (b) 05 HP |
| 51 | Supply and fix in repairs front ends bearing of same size as existing suitable for motor incl all fiiting and fixtures as directed by Engr-in-charge as following : - |
| 52 | (a) 20 HP |
| 53 | (b)05 HP |
| 54 | Supply and fix in repairs rear ends bearing of same size as existing suitable for motor incl all fitting and fixtures as directed by Engr-in-charge as following : - |
| 55 | (a) 20 HP |
| 56 | (b)05 HP |
| 57 | Taking down carefully copper/aluminium point wiring (light, fan socket or power) complete including PVC Casing Capping and conduit, fixture and fitting such as switches, ceiling roses, pendents, regulators, sockets etcand making good disturbed surface of walls,floors etc all as directed. |
| 58 | Taking down light fitting any type any watt complete all as specified and directed |
| 59 | M&L for point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multistranded copper conductor 1.5 sq mm nominal cross-sectional area , single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No.in and inciuding medium grade, PVC casing caping and accessories on wall/roof/floor etc, ISI marked with mild steel/pressed steel sunken box of 1.8 mm thick and 60 mm deep (with earth dolly) duly painted with two coats of anti corrosive paint/aiuminium paint over a coat of red oxide primer internally. and two coats of black bituminous paint over a coat of red oxide primer externally,covered with 3 mm thick plastic laminated sheet cover for fixing of switches, socket and fan regulators etc, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed by Engineer-in-charge for One light or fan point, controlled by one, one way switch 5 Amps. |
| 60 | S&F in repairs switch piano, flush type, 5 amps, 230 volts, single pole, one way (ISI marked) complete including taking down specified. |
| 61 | S&F repairs ceiling rose, PVC of size 65 mm x 18 mm two to three terminals (ISI marked) all as specified. |
| 62 | Material and labour for dismantling the Blower set (Everest Blower- Twin Lobe Blower , Model-EB6HPM) complete including taking down of up to 15 HP and carrying out repair/replacement for defective parts such as bearing, shaft sleeves, gland plate, impeller, including replacement of worn out nuts, bolts, filling of pump oil heavy grade (Super-90) , greasing of bearing, replacement of gaskit, mechanical seal, rotor job, replacement of belts,etc etc complete including taking down all as directed and reassmebling, testing & commissioning complete including taking down. Note:1. Rates for making arrangement for lifting up blower motor shall be deemed in quoted rates.2. Once the motor set repaired, the contractor shall by default get the bearing, and other necessary parts changed and shall remain responsible for proper functioning of motor pump for complete including taking down one year from the date of repair. No extra cost will be paid to the contractor for any other repair work if at all required within this duration of one year.3. Item Rate Include Alignment of Shaft , Servicing of Motar ,servicing Of Blower ,Servicing of Gear Box,Grease Required at job Work include in unit Rate |
| 63 | Material and labour for dismantling the Sewage suction set (Johnson Pump SPX ) complete including taking down of up to 05 HP and carrying out repair/replacement for defective parts such as bearing, shaft sleeves, gland plate, impeller, including replacement of worn out nuts, bolts, filling of pump oil heavy grade , greasing of bearing, replacement of gaskit, mechanical seal, rotor job, replacement of belts,etc etc complete including taking down all as directed and reassmebling, testing & commissioning complete including taking down. Note:1. Rates for making arrangement for lifting up blower motor shall be deemed in quoted rates.2. Once the motor set repaired, the contractor shall by default get the bearing, and other necessary parts changed and shall remain responsible for proper functioning of motor pump for complete including taking down one year from the date of repair. No extra cost will be paid to the contractor for any other repair work if at all required within this duration of one year.3. Item Rate Include Alignment of Shaft , Servicing of Motar ,servicing Of Blower ,Servicing of Gear Box,Grease Required at job Work include in unit Rate |
| 64 | Supply and float suspended plastic carriers (as available on site) with large protected surface areas for the growth of bacteria and proper decomposition of sludge in all three tanks complete all as specified and directed by Eng-In-Charge. |
| 65 | Supply and lay M S Pipes heavy grade with all fittings including taking down old MS pipes laid in floors or fixed to walls and ceilings/Sewage well etc of sizes as shown for bore dia of pipes.Note: i. Fixing/laying includes welding works as per the need of site.ii.The rates of proper welding in and including flanges and smoothing the surface deemed in quoted rates. |
| 66 | (a) 100 mm bore size |
| 67 | (b) 150 mm bore size |
| 68 | M & L for scrapping/cleaning of outer surfaces of Pipes of any size and any type and Headers and spray painting with two coats of best qualitiy MS sythetic anticorrosive bitumin paint over one coat of red oxide primer(colour as per colour code) complete including marking and writing details all as directed by Engr-In-Charge. |
| 69 | S & F in repairs butterfly valve, high pressure with crutch or butterfly handle for iron pipe or for unions (P.N 1.6) of follwing sizes complete including taking down all as specified. (Note:- The contractor shall bring the valves as per site requirement and site dimensions taking prior permission from EIC). Make: Audco/SIR/Apollo |
| 70 | (a) 40 mm bore. |
| 71 | (b) 80 mm bore. |
| 72 | (c) 100 mm bore. |
| 73 | M&L for painting of following capacity monoblock/centrifugal from foundation (base plate to be scratched and painted) painting (all as per colour code specified) by synthetic enameled paint one coat after cleaning and preparing surface for painting, reinstalling and testing complete at site on full load all as directed by Engr-in-Charge. |
| 74 | (a) 05 HP |
| 75 | (b)15/20 |
| 76 | Supply, lay, test connecting and commissioning underground cable LT 1100 volt grade heavy duty XLPE insulatedwith aluminum stranded conductor armoured complete laid in trenches/fixed to poles /drawn through pipes with suitable size cable glands criping type cable lugs etc all as specified and directed of size 6 Sqmm 4 core including taking out old unsv cable. |
| 77 | M & L in replacement for preparation of lighted glow sign board of Size (2X1X0.2) metre with writeup as specified by EIC in bold letters with aluminium housing on three sides of proper thickness and writeup on Acrylic sheet of suitable thickness having 2X18 W LED fitting with prewired and arrangement for giving supply to sign board complete including taking down with fixed on angle iron structure of 50X50X4mm complete including taking down with PCC in ground and sign board bottom about 3 feet above ground level complete including taking down all as specified and directed by Engr-In-Charge. Note:Dimensions of sign board to be discussed with Engr-In-Charge before placing order. |
| 78 | S&F in repair, bldg security light fittings Wall mounted LED light 20 Watt including bracket made out of GI pipe (medium grade) 40mm, 1.20 metre long made to shape and fixed outside of the building by means of 2 No FI 40x6 mm clamps with suitable size of nuts, bolts, washers and connecting with three core copper flexible cable of size 1.50 Sq mm complete including taking down all as directed by Engineer-in-charge. (Make:- Havells Cat No. LHETAXU7PA6S020 or EQUIVALENT MAKE IN CROMPTON, PHILIPS, BAJAJ, Wipro and Syska etc) |