Construction Of Signal Room Over Existing Deputy Commandant Residential Quarter At District Jail Baramulla ( Sre ) Signal Room Over Existing Deputy Commandant Residential Quarter At District Jail Baramulla ( Sre )
Tender Value
14 Lakhs
Estimated cost
Bid Submission
02 Aug 2021
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
1500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
District_Jail_Baramulla → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Signal Room Over Existing Deputy Commandant Residential Quarter At District Jail Baramulla ( Sre ) Signal Room Over Existing Deputy Commandant Residential Quarter At District Jail Baramulla ( Sre )
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of Temporary Truss work of the Depty Commandants quarter and Staking of the serviceable material within the lead of 50 mt and disposal of unserviceable material beyound the jail limits . |
| 2 | Centering and shuttering including strutting, propping etc. and removal of formfor suspended floors, roofs, landings, balconies and access platforms. using 12mm ply including all carriages. |
| 3 | Providing and laying Reinforced cement concrete 1:1.5:3 (1 Cement: 1.5 coarse sand: 3 graded Stone aggregate 20mm nominal size) (crushed) in suspended floors, beams, columns, roofs, lintels balconies, landings and staircase excluding cost of centering and shuttering all work up to floor V level including all carriages and cost of materials involved up to site of work complete. |
| 4 | Reinforcement for RCC works including straightening, cutting, bending placing in position and binding all complete. Thermo Mechanically Treatedbars. including all carriages . |
| 5 | Brick work with common burnt clay FPS non modular bricks of class designation 75 upto floorV level in cement mortar 1:6 (1 cement :6 coarse sand)including all carriages. |
| 6 | Providing wood work in frames of doors, windows, clesrestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately)imported kail wood including all carriages.. |
| 7 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarses and : 6 graded stone aggregate 20mm nominal size). |
| 8 | Providind and fixing 32 mm thickpanelled or panelled and glazed shutters for doors,windows and clerestory windows including ISI marked M.S prepared butt hinges bright finished of required size with necessary screws excluding panelling/glazing which will be paid separetely ,all complete including carriages as per direction of engineer-in-charge First class importedkail wood |
| 9 | Providing and fixing 32 m thick wire guaze shutters using galavanised M.S wire guaze of average width for aperture 1.4 mm in both direction with wire of dia 0.63 mm for doors,windows and clerestory windows with ISI marked M.S pressed bright finished butt hinges with b necessary screws of required size including carriages complete First class importedkail wood . |
| 10 | Providing and fixing 32 mm thick panelled or panelled and glazed shutters for doors including cost of black enameledM.S pressed Butt hinges bright finished of required size with necessary screws including panels of 12 mm thick block board and 32 mm thick cornice on both sides ( First classimported Kail wood) including all carriages. |
| 11 | 15 mm Cement plaster on the rough side of single or half brick wall of mix: 1:6(1 cement:6 coarse sand) including all carriages complete. |
| 12 | Providing and laying vitrified floor tiles in 600X600 mm size (thickness to be specified by the manufacturer) with waterabsorption less than 0.08% and conforming to 13:15622of approved make in all colours and shades, laid on 20mmthick cement mortar 1:4 (I cement :4 coarse sand)including grouting the joints with white cement andmatching pigments etc. including all carriages complete |
| 13 | Providing and fixing of plain eaves boarding300mm x 35 mm (nominal size)importedkail wood incl cost of nails complete. |
| 14 | Providing and fixing glass panes 3.5mm thickness as per specification with wooden beading . |
| 15 | Providing and fixing first quality ceramic glazed wall tiles conforming to IS:13753 of minimum thickness of 10mmof approved make like SOMANY or equilant make in all colour shades except bergundy, bottle green ,black of any size as approved by engineer Incharge in skirting , risers of steps and dados over 12mm thick of cement Mortar(1 cement: 3coarse sand ) including the joints with grey cement slurry @ 3.30 kg/sm includingpointing in whitecement mixed with pigment of matching shade complete. 300 x 450mm |
| 16 | Providing and fixing first quality ceramic floor tiles conforming to IS:13753 of minimum thickness of 5mmof approved make like NITCO, KAJARIA,SOMANY or equivalent make over 20mm thick of cement bed(1 cement: 3coarse sand ) including the joints with grey cement slurry @ 3.30 kg/sm includingpointing in white cement mixed with pigment of matching shade complete. 300 x 300mm |
| 17 | Providing and applying white cement basedputty (Birla or equivalent )of 2mm thickness over plastered surface to prepare the surface even and smooth including all carriages complete |
| 18 | Distempering with oil bound washable distemper of approved quality one or more coats on new work and including priming coat with cement primer |
| 19 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work including Applying priming coatwith ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) including all carriages. |
| 20 | Finishing walls with weather resistant exterior Epoxy paint of approved brand,manufacture and shade(two or more coat on new work) over and incl:base coat of water proofing cement primer including all carriages. |
| 21 | Providing and fixing of aluminum Hardware fittings i/c cost of necessary screws |
| 22 | T. Bolt (6 \") |
| 23 | Handle (5\") |
| 24 | T. Bolt (4\") |
| 25 | L- Drop (250 mm) |
| 26 | Providing and fixing water closet squatting pan ( Indiantype W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level P.V.C. flushing cistern (of approved make) with manually controlled device (handle lever) conforming to IS:7231, with all fittings C.I/M.S. brackets, 32mm diameter flush pipe with fittings and clamps, over flow arrangement with specials and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required white vitereous china W.C. pan of size 580 mm including carriages(Hindustan or equivalent) |
| 27 | Providing and fixing wash basin with pedastal (Jaguar/Hindware/Cera/Essal or equivalent)and making good the walls wherever required white vitrous china washbasin size 630*450including all carriages |
| 28 | Providing and fixing of 50 ltr water heater gyser (Venus/Recold/Jaguar or equivalent make including nuts and bolts and necessary fittings including all carriages complete job. |
| 29 | Providing and placing on terrrace (at all floor levels) polyethene water storage tank ISI:12701 marked indicating the BIS License No with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fittings and base support for tank(Sintex,Electroplat,Star,Lotus or equivalent having valid ISI license) including all carriages. |
| 30 | Constructing brick masonry manholes of size 18\"*18\" in cement mortar1:4 ( 1 cement : 4 coarse sand) , foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement: 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finsihed with a floating coat of neat cement complete as per standard design including PVC frame with cover complete job including all carriages and costs. |
| 31 | Providing and fixing of PVC soil/waste/ventellating pipes of Prince/Phenolex or equivalent make(Type-B) of following size as directed by the site Engineer including all carriages. |
| 32 | 100 mm dia pipes |
| 33 | 75 mm dia pipes |
| 34 | Providing and fixing of PVC pipe fittings of Prince/Phenolex or equivalent make of following size to soil/waste/ventellating pipes as directed by the site Engineer including all carriages. |
| 35 | 100 mm dia door tee |
| 36 | 100 mm dia plain bend |
| 37 | 100 mm dia collar |
| 38 | 75 mm dia door bend |
| 39 | 75 mm dia plain bend |
| 40 | 75 mm dia collar |
| 41 | 75 mm dia Floor trap |
| 42 | Reducer (75X100 mm) |
| 43 | Providing and fixing of 12mm thick imported wooden panelling for soffits incl. c/o 50mm x 40mm wooden frame work of ist class budloo wood . |
| 44 | Providing and fixing of GI pipe lines to walls/ceilings/floors (Light grade of specified mass )Prakash Surya /Jindal or equivalent including jointing,testing and making good the surface as directed by the site engineer including all carriages complete job |
| 45 | 15 mm dia concealed |
| 46 | 20 mm dia |
| 47 | Providing and fixing GI pipe fittings of specified brand (ISI mark UNIK/Nike/Princeor equivalent including testing and commissioning and all carriages complete. |
| 48 | 20 mm tAnk nipple |
| 49 | 15 mm Ball value |
| 50 | 15 mm dia Union |
| 51 | 15 mm Tani Nipple |
| 52 | Providing and fixing of CP fixtures of Jaguar /Hindware /Cera / Essel/Parko or equivalent make including jointing testing and making good to surfaceas directed by the site Engineer including all carriages. |
| 53 | pvcconections 24\" |
| 54 | 100mm dia c. p. grating |
| 55 | Looking mirror |
| 56 | soap case |
| 57 | waste pipe |
| 58 | c.p. cup |
| 59 | C.P. Angle valve. |
| 60 | C.P. BibCock |
| 61 | C.P. wall Mixer . |
| 62 | C.P. Basin Mixer . |
| 63 | Towel Rod . |
| 64 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. This Excludes ConduitMake:-/Anchor/finolex/polycab or Equivalent |
| 65 | Wiring for heatingpoint with 2.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. This Excludes ConduitMake:-/Anchor/finolex/polycab or Equivalent |
| 66 | Providing Installation testing and commissioning ofCeiling Fans of approved brands with connections etc as required Make:- Anchor/Indoasian/havells 0r equivalent |
| 67 | Supplying and fixing two module Stepped type electronic Fan Regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.Make:- Anchor/Indoasian/havells 0r equivalent |
| 68 | Supply & Fixing63 Amp MCB DP |
| 69 | Supplying and fixing of 5 amps to 32 amps rating 240/415 volts \"C\" curve, miniature circuit breaker suitable for inductive loadin the existing MCB DB complete with connections, testing and commissioning etc. as required of Approved Brand. Make:- Anchor/Indoasian/havells 0r equivalent |
| 70 | Supplying and fixingof 10way horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) Make:- Anchor/Indoasian/havells 0r equivalent |
| 71 | P/F of 7/36 wire |
| 72 | Structural steel work weldded in built up sections, and framed work i/c cutting , hoisting , fixing in position in frames of windows/ doors and shutters with angle iron ,flat ,square or round bars , M.S sheetsetc fixed to opening /wood frames with rawal plug screws.and applying a priming coat of approved steel primer all complete. |
| 73 | Fixing of already Dismantelled Temporary Truss work of the Depty Commandants quarter with the Material Available at sitei/c providing of new material which will be defecit due to the unseviceable material obtained from the dismantelling of the truss berfore execution of work |
AI Tender Summary
Tender Timeline
Jul 23, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedAug 02, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 03, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender