Maintenance . Of Road From Sabroom Baishnabpur Road Near Channa Banik House To Kathalchari Nbcc Road ( L 1.400 Km. ) S.H Patch Sollingpatch Metalling, Patch Carpetting, Carpatting, Seal Coat Etc. During The Year 2021 2022 Mtc. Of Road From S
Tender Value
14.32 Lakhs
Estimated cost
Bid Submission
05 Aug 2021
0 days left
EMD
14321
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sabroom → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Maintenance . Of Road From Sabroom Baishnabpur Road Near Channa Banik House To Kathalchari Nbcc Road ( L 1.400 Km. ) S.H Patch Sollingpatch Metalling, Patch Carpetting, Carpatting, Seal Coat Etc. During The Year 2021 2022 Mtc. Of Road From Sabroom Baishnabpur Road Near Channa Banik House To Kathalchari Nbcc Road ( L 1.400 Km. ) S.H Patch Sollingpatch Metalling, Patch Carpetting, Carpatting, Seal Coat Etc. During The Year 2021 2022
BOQ
| Sl. No. | Item Description |
| 1 | Maintenance of bituminous surface road using Jhama brick aggregateRepair to pot holes by removal of failed material, trimming the sides to vertical and levelling the bottom, cleaning the same with compressed air or any appropriate method, filled with B.M (using jhama brick aggregate & bitumen of VG-30), after applying prime coat at the bottom and tack coat on sides and on bottom (using bitumen emulsion) and compacting, trimming & finishing the surface to form a smooth continuous surface, all as per MoRD technical specification Clauses 1900, 502, 503 and 504. |
| 2 | Flat Brick Soling.Providing and laying flat brick soling layer on prepared subgrade according,filling joints with Earth free from clay with a plasticity index not execeding 6,watering and rolling the same with three whecled road roller 80-100 Km as per MoRD Technical Specifical Clause 412. |
| 3 | Brick edging laid length wiseProviding and laying brick edging laid lengthwise on prepared subgrade according to lines, grades and cross-section shown on the drawing, filling joints with Earth, free from clay with a Plasticity Index not exceeding 6, watering and rolling the same with three wheeled road roller 80-100 KN as per MoRD Technical Specification Clause 412. |
| 4 | 1) WBM Grading 3 :Providing, laying, spreading and compacting 63 mm to 0.075 mm jhama brick aggregates to water bound macadam specification including spreading in uniform thickness, hand picking rolling with three wheel roller 80-100 KN in stage to proper grade and camber, applying and brooming and binding materials to fill up the interstices of coarse aggregate , watering and compacting to the required density Grading 2 as per MoRD Technical Specification Clause 405. (A) By manual means |
| 5 | Tack Coat:II) Tack Coat Using hot straight run bitumin of grade VG-30 on W.B.M Providing and applying tack coat Using hot straight run bitumin of grade VG-30 including heating the bitumen, spreaying the bitumen cleaning andpreparing the existing road surface as per Specification on W.B.M @ 0.75 kg/sqm.502. |
| 6 | Tack coat using hot straight run bitumen of grade VG-30 on bituminous surface Providing and applying tack coat using hot straight run bitumen of grade VG-30, including heating the bitumen, spraying the bitumen, cleaning and preparing the existing road surface as per specifications: On bituminous surface @ 0.50 Kg/ Sqm. |
| 7 | 20mm thick open –graded premix carpet using Bituminous (penetration grade / Modified bitumen) binder.Providing & laying rolling of open –graded carpet of 200mm thickness composed of 13.2mm to 5.6mm aggt.Either using penetration grade bitumen of emulsion to required line, grade & level to serve as wearing course on a previously prepared base in/c. mixing in a suitable plants, laying & rolling with a three wheel 80-100km static roller capacity, finished to required level & grades to be followed by seal coat of either type A or type B C or type D as per MoRD technical specification clauses 508.1) By Manual means Means.I) Bitumen VG-30 |
| 8 | Seal CoatProviding & laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade & cross fall using type A or B type C or D as per MoRD technical specification clauses 510.1) By Manual Means.Case-iv : Type D ( Premix with fine sand )I) Bitumen VG-30 |
AI Tender Summary
Tender Timeline
Jul 22, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedAug 05, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 06, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender