Maintenance Of Road From Rajibnagar To Rupaichari Via Garifa ( Rupaichari Part ) ( L- 4.00Km ) In Between Ch.2.00Km To Ch.4.00 Km During The Year 2021-22 Sh Patch Metalling, Re Carpeting, Sand Seal Coat, Pucca Drain And Unlined Surface Drain Etc Gr
Tender Overview
Project Description
Maintenance Of Road From Rajibnagar To Rupaichari Via Garifa ( Rupaichari Part ) ( L- 4.00Km ) In Between Ch.2.00Km To Ch.4.00 Km During The Year 2021-22 Sh Patch Metalling, Re Carpeting, Sand Seal Coat, Pucca Drain And Unlined Surface Drain Etc Gr-Ii
BOQ
| Sl. No. | Item Description |
| 1 | WBM Grading 3 :Providing, laying, spreading and compactingjhama brick aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand picking rolling with three wheel roller 80-100 KN in stage to proper grade and camber, applying and brooming and binding materials to fill up the interstices of coarse aggregate , watering and compacting to the required density Grading 3 as per MoRD Technical Specification Clause 405. (A) By manual means |
| 2 | Tack Coat:II) Providing and applying tack coat with bitumen emulsion (RS- 1) using emulsion distributor at the rate of 0.25 to 0.30kg per sqm on the prepared dry & hungry bituminous surface cleaned with hydraulic broom as per MoRD Technical Specification Clause 503. |
| 3 | 20mm thick Open-Graded Premix Carpet using Bituminous (viscosity grade/ modified bitumen) BinderProviding, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80 - 100 KN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C or Type D as per MoRD Technical Specification Clause 508.Case - I By Manual Means(I) Bitumen of VG-30 |
| 4 | Seal CoatProviding & laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade & cross fall using type A or B type C or D as per MoRD technical specification clauses 510.1) By Manual Means.Case-iv : Type D ( Premix with fine sand )I) Bitumen of VG-30 |
| 5 | Road side Pucca DrainsConstruction of road side pucca drain with M10 ( 1:3:6 with jhama brick aggregate)to specified lines, grades, levels and dimensions as per approved design and MoRD Technical Specification Clause 307, 1606. Excavated material to be used in embankment at site. (including centring, shuttering, etc. but excluding reinforcement) (D) U shaped drain ( top clear width 600 mm, bottom clear width 600 mm and clear depth of 600 mmI. In Ordinary Soil |
| 6 | Surface drainConstruction of unlined surface drains of average cross sectional area 0.4 Sqm in ordinary soil to specified lines, grades levels and dimensions. Excavated material to be used in embankment with a lift upto 3m and lead of 50m (average lead 25m) as per MoRD Technical Specification Clause 307a) By manual meansi) Ordinary soil |
| 7 | Maintenance of Earthen shoulder (Stripping of excess soil) Stripping excess soil from the shoulder surface to achieve the approved level and compacting with plate compactor at OMC as per drawing and MoRD technical specification Clause 1903. |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
CompletedBid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender