}

Construction Of Mini Rpws Scheme With Rcc Water Tank, Dc Solar Motor Pump And 5 Years Om Etc All Complete Job In Block Satgawan Panchayat Tehro Village Gargoyia Under D.W. And S. Div Jmt On Turn Key Basis For The Year 2021-22. , D. W. and S. Division Jhumritelaiya-Jharkhand

Drinking Water And Sanitation Department has published Construction Of Mini Rpws Scheme With Rcc Water Tank, Dc Solar Motor Pump And 5 Years Om Etc All Complete Job In Block Satgawan Panchayat Tehro Village Gargoyia Under D.W. And S. Div Jmt On Turn Key Basis For The Year 2021-22. . Submission Date for this Tender is 31-07-2021. Pump Supply Tenders in D. W. and S. Division Jhumritelaiya Jharkhand. Bidders can get complete Tender details and download the document.




Tender Notice

28570820
Construction Of Mini Rpws Scheme With Rcc Water Tank, Dc Solar Motor Pump And 5 Years Om Etc All Complete Job In Block Satgawan Panchayat Tehro Village Gargoyia Under D.W. And S. Div Jmt On Turn Key Basis For The Year 2021-22.
Open Tender
Indian
Jharkhand
D. W. and S. Division Jhumritelaiya
31-07-2021

Tender Details

Construction Of Mini Rpws Scheme With Rcc Water Tank, Dc Solar Motor Pump And 5 Years Om Etc All Complete Job In Block Satgawan Panchayat Tehro Village Gargoyia Under D.W. And S. Div Jmt On Turn Key Basis For The Year 2021-22.

Key Value

Document Fees
INR 1250 /-
EMD
INR 17000.0 /-
Tender Value
Refer document

BOQ Items

Name of Work :- Construction of GARGOYIAMini Rural Water Supply Scheme with RCC Water tank having utility Room at Ground level and 1 Nos HP DC Solar motor pump set for Tolas / village / areas which is not covbered in MVS/SVS/OTHER Scheme Based on Existing / proposedDrilled Tube well/GPT having potential to supply water and 5 Years Operation and Maintenance under JJMin the state of Jharkhandin the district of Koderma Block - Satgawan, Panchayat - Tehro, Village - Gargoyia under D. W. & S. Division Jhumritelaiya on Turn Key Basis for the year 2021-22
Sl. No. Item Description
1Gargoiya Mini RPWSS
2Solar submersible motor pump (SPV DC Type)
3i) 2 HP (DC Pump) with 900 WP minimum watt P.V. Panel as MNRE pump head Max Shut-off head up to 120 mtrs. For higher or lower head or in between various modules output could be decided on prorates basis. (As per latest guide line of MNRE)
4Carrying out recuperation/Yield Test for ascertaining the discharge of constructed well/ excavated profile as directed by the IEC. The testout by the drawing down water from the well/ profile below normal/subsoil water level up to full depth rise is recorded the normal water level/subsoil water level in the well / profile as well as strainer/level at pump as per design of W.S. scheme shall be recorded prior to the test including cost of all materials, over Load , Labours etc. complete as directed.
5Supplying all labours, tools and equipments for dismantling of head & water tank assembly and taking out 32 mm dia old G.I. Pipe, connecting rod, cylinder assembly the dismantled components after necessary changing for making the T/W in good condition with all transportation including unused taken out materials back in store all complete job as per direction of E/I.
6Provision of solar night lamp.
7RCC Water Tank (4000 Ltr)
8Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil item-B ) and disposal of excavated earth as obtained to a distance up to 50 m including all lifts,levelling,ramming the foundation trenches, removing roots of trees shrubs all complete as per approved design, building specification and direction of E/I.
9Providing P.C.C.M-150 in nominal mix of (1:2:4) in foundation with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M 2.5 to 3 including screening, mixing cement concrete in mixer and placing in position,vibrating,curing,taxes and royalty all complete as per building specification direction of E/I.
10Providing and laying in situ Cement concrete of trap/granite/quartzite/ gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, "plywood form work, bully/steel propups, compaction, finishing andcuring, etc, complete. (By weigh batching and mix design for M-250only. Use of L & T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (excluding M.S. or Tor reinforcement) Section-G-Plain and Reinforced Cement Concrete-item 10 b
11Providing and casting in situ Cement Concrete of trap/granite/quartzite/ gneiss metal of approved quality for RCC work as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, "plywood formwork, bully/steel prop-ups, compaction, finishing the formed surfaces with CM 1:3 of sufficient minimum thickness if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C. C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted) (excluding M.S, or Tor reinforcement) For RCC M-250 grade Column Section-G-Plain and Reinforced Cement Concrete-item 11 b +11 c
12A. Column Utility Room. Roofto 2nd bracing M-25
13Providing and casting in situ Cement Concrete of trap/granite/quartzite/ gneiss metal of approved quality for RCC work as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, "plywood formwork, bully/steel prop-ups, compaction, finishing the formed surfaces with CM 1:3 of sufficient minimum thickness if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C. C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted) (excluding M.S, or Tor reinforcement) For RCC M-250 grade Beams/Braces/Lintels -Section-G-Plain and Reinforced Cement Concrete-item 13 C
14Beam of Tank Floor M-30
15Providing and casting in situ Cement Concrete of trap/granite/quartzite/ gneiss metal of approved quality for RCC work as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, "plywood formwork, bully/steel prop-ups, compaction, finishing the formed surfaces with CM 1:3 of sufficient minimum thickness if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C. C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted) (excluding M.S, or Tor reinforcement) For RCC M-300 grade Slabs / Landings / Vertical Walls
16Tank Roof top M-25 landing
17Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads including cost of materials,labours,royality and taxes all complete as per building specification and direction of E/I.(Mode of measurement-compacted volume)
18Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes royalty all complete as per building specification and direction of E/I.
19Filling in foundation trenches and plinth in layers not exceeding 150mm thick, well watered,rammed,fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50M and lift of 1.5M all complete as per building specifications and direction of E/I.(Mode of measurement-compacted volume)
20Providing designation 75 A Brick work in C.M(1:6) in foundation and plinth with approved quality of clean coarse sand of F.M.2 to2.5 including providing 10mm thick mortar joints, cost of screening,scaffolding,raking out joints to 15mm depth,curing,taxes and royalty all complete as per building specification and direction of E/I.
21Providing designation 75A Brick work in C.M(1:6) in superstructure with approved quality of clean coarse sand of F.M 2 to 2.5 including providing 10mm thick mortar joints, cost of screening,scaffolding,raking out joints 15mm depth,curing,taxes and royalty all complete as per bldg. specification and direction of E/I.
22Providing R.C.C.M-150 in nominal mix of (1:2:4) in lintel with approved quality of stone chips (20mm to 6mm size) graded and clean coarse of F.M 2.5 to 3 including screening, centering, shuttering, mixing cement concrete in mixer and placing in position, vibrating striking, curing(but excluding the cost of reinforcement),taxes and royalty all complete as per building specification and direction of E/I. BCD-5.3.08
23Providing av.63 mm thick R.C.C M-200 in nominal mix of (1:1.5:3) chhajja with approved quality of stone chips (20mm to 6mm size) graded and clean coarse sand of F.M 2.5 to 3 including in mixer and placing in position,vibrating,striking,6mm cement plaster(1:4) in ceiling and sides of chhajja with sand of F.M 1.5, curing(but excluding the cost of reinforcement) taxes, and royalty all complete as per building specification and direction of E/I.
24Providing T.M.T steel reinforcement of different dia rods as per approved design and drawing including carriage of M.S bars to work site, cutting bending and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I.
25Supplying, fitting and fixing M.S grill made of 20*6 mmM.S flats as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I. Window
26Providing and fixing fan hooks of 16 mm dia M.S.bar & 1 meter long bent to required size and shape, placed in position and fixed in the R.C.C. slab/beam at the time ofcasting all complete as per building specification and direction of E/I.
27Supplying, fitting and fixing 20 gauge G.C.I sheet gate fitted on M.S angle frame of size60*60*6 mm including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in C/C(1:2:4) blocks of required size, applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I.
28Providing 12 mm cement plaster (1:4) with clean coarse sand of F.M 1.5 including cost of screening, curing with all leads and lifts of water,scaffolding,taxes and royalty all complete as per building specification and direction of E/I.
29Providing 12 mm cement plaster (1:6) with clean coarse sand of F.M 1.5 including cost of screening, curing with all leads and lifts of water,scaffolding,taxes and royalty all complete as per building specification and direction of E/I.
30Providing 6 mm cement plaster (1:4 ) in ceiling with clean coarse sand of F.M 1.5 including cost of screening, curing with all leads and lifts of water,scaffolding,taxes and royalty all complete as per building specification and direction of E/I.
31Providing 12 mm cement plaster (1:3) with clean coarse sand of F.M 1.5 with floating coat of neat cement in skirting including rounding of junctions with floor,curing,taxes and royalty all complete as per building specification and direction of E/I.
32Providing 19 mm water proof cement plaster (1:3) with clean coarse sand of F.M 1.5 with 5% cico or any other approved water proofing compound including cost of screening, curing with all leads and lifts of water,scaffolding,taxes and royalty all complete as per building specification and direction of E/I.
33Providing 1.5 mm cement punning including curing, carriage of water with all leads and lifts as per building specification and direction of E/I.
34Providing two coats of snowcem of approved shade and make over old surface including washing, cleaning, sand papering the wall,scaffolding,curing and taxes all complete as per building specification & direction of E/I.
35Extra for each coat of cement wash, distemper paint or snowcem over exterior surface for each consecutive floor above first floor including scaffolding etc all complete as per building specification & direction of E/I.
36Providing two coats of synthetic enamel paint of approved shade and make over steel surface throughly,scaffolding and taxes all papering including cost of scaffolding and taxes all complete as per building specification & direction of E/I.
37Providing and fixing G.I. pipe railing having 1.0 M height consisting 50 x 50 x 6 mm thick M. S. angles as verticals at 1.5 M c/c, and additional posts at every corner with 3 rows of 25 mm dia G.I. pipes of medium class variety as horizontal and painting 3 coats of oil paint over 1 coat of anticorrosive paint of approved colour and shade including cost of all labour, transporting bends to curved shape, etc. complete. Section-H-Miscellaneous Works 48 item -1
38Providing and fixing in position M.S. ladder 0.50 M wide consisting of 75 x 10 mm M.S. flats as stringers and 16 mm dia M.S. bars in double rows as steps placed at 25 cm c/c including cost of material and labour involved, welding, anchoring and applying 3 coat of anti-corrosive paint, etc. complete as directed by Engineer-in-charge. Section-K-ANCILLARY ITEMS FOR RESERVOIRS 225 Item No-5
39Carriage of Materials
40Cement & rod 5km
41Sand 10 KM
42Stonechips Lead 20KM
43Bricks Lead30 KM
44Distrubtion and Rising work
45Earth work in excavation in foundation trenches in hard soil (Vide classification soil item B) do-doall complete as per approved design, specification and direction of E/I.
46Providing and Supplying Blue MDPE pipes conforming to ISO 4427:1996 manufactured from virgin resin PE 80 Food grade compounded Raw Material having Blue Colour only with quality assurance certificate from quality agencies like WRC /CIPET (India) /DVGM /KIWA /SPGN etc. for usage in Drinking Water system. The cost shall include testing of all materials, Inspection charges, transportation up to store, transit insurance, loading, as specified and directed, unloading, stacking excluding GST levied by GOI & GOM in all respect, etc. complete as specified and directed PN12.5
4763 mm HDPE pipe
4850 mm HDPE pipe
4932 mm HDPE pipe
5020 mm HDPE pipe
51RISING
52Manufacture, supply and Delivery offollowing Nominal dia UPVC column pipes including PVC socket (Coupler),
5365mmdia -Density of pipe 1.38 to 1.43 Gm per Cm3 OD:74.5 to 75.2mm wall Thickness End:9mm to 10.7mm, Barrel 9mm to 10.7 mm, Length: 3Mtrs.Rising main
5450 mm dia -Density of pipe 1.38 to 1.43 Gm per Cm3 OD:87.5 to 88.2mm wall Thickness End:9 .8 mm to 11.9mm, Barrel 7.3mm to 9 mm, Length: 3Mtrs. Delivery Pipe
55Providing & Supply of Electro Fusion Fittings in accordance with BS EN12201: Part-3 suitable for drinking water with in black/ blue colour manufactured from compounded PE80/ PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rating SDR11 with min PN12.5 rated for water application and shall be inclusive of all cost such as testing, inspection charges, transportation up to store, transit insurance, loading, unloading, stacking excluding GST levied by GOI & GOM in all respect, etc. complete.
56ELBOW-63 mm dia.
57ELBOW- 50 mm dia.
58ELBOW- 32 mm dia.
59TEE PLAIN 63mm Dia
60TEE PLAIN -50 x 50 xmm
61TEE PLAIN -32 mm
62REDUCING SOCKET-63 mm x 50mm
63REDUCING SOCKET- 63mm x 32mm
64REDUCING SOCKET-50 mm x 32mm
65PLUG- 63 mm
66PLUG- 50 mm
67PLUG- 32 mm
68Reducing Tee 63 x 63 x 50
69Reducing Tee 63 x 63 x 32
70Reducing Tee 50 x 50 x 32
71SOCKET- 63 mm
72SOCKET- 50 mm
73SOCKET- 32 mm
74Lowering, Laying and Jointing H. D. P. E./ M. D. P. E. pipes in proper positionetc. all complete as per direction of E/I. labours as directed by engineer in charge.
7563 mm HDPE pipe-
7650 mm HDPE pipe-
7732 mm HDPE pipe
7820 mm HDPE pipe
79Hydraulic testing of H. D. P. E./ M. D. P. E. pipe line do-do all complete as per direction of E/I.position.
8063 mm HDPE pipe
8150 mm HDPE pipe
8232 mm HDPE pipe
8320 mm HDPE pipe
84Providing and fixing Gun Metal full way valve of approved quality, all complete, as per specification and direction of E/I.
8532 mm dia and weight not less than 700 gms.
8650 mm dia and weight not less than 1.5 Kg.
8765 mm dia Full way valve
88Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design. With common burnt clay F.P.S.(non modular) bricks of class designation 7.5.
89Full WayValve Chamber
90Providing brick masonry chamber ofinner size 600 x 600 x 450 mm deep for bore well protection having 125 mm thick wall and 75 mm R.C.C cover including cement plaster of exposed surface, etc all complete job
91Earth work in back filling the trenchage after laying different type and size of pipes do-do all complete as per direction of E/I.
92House Connection
93Earth work inexcavation in foundation trenches in hard soil vide classification item-B do-do as per specifications and direction ofE/I.
94Providing coarse clean sand in filling in foundationdo-doall complete as per building specification and direction of E/I.
95Providing P C C M-150 in nominal mix of (1:2:4)in foundation with approved quality of stone chips 20mm to 6mm size do-do all complete as per building specification and direction of E/I.
96Earth work in back filling the trenchage do-do as per specification and direction of E/I. Same as pipe of Sl No.(1)
97Providing 12 mm thick cement plaster (1:3) with clean coarse sand do-do all complete as per building specification an direction of E/I.
98Providing and supplying G.I. pipes(Tata and euivalent make) for usage in drinking water etc. complete as specified and directed.
9915 MM
100Supplying labours and tools for fixing G.I.Pipes with red lead and yarn do-doall complete as per specification and direction of E/I.
10115 MM
102Supplying and fixing of G.M. ferrule do-doall complete as per specification and direction of E/I.
103Providing and fixing of G.M. Fullway valve of approved quality all complete as per specification and direction of E/I.
104Providing and fixing of male ended C.I.Body brass spindle valve and seat Bib cock of approved quality with extra socketall complete as per specification and direction of E/I.
105Supplying and fixing G.I.fitting of approved make all complete as per specification and direction of E/I.
10620 mm diaElbow
10715 mm diaElbow
10820mm dia R/Socket
10920mm dia Nipple
11015mm dia Nipple
11120mm dia Union/Socket
11215 mm dia Socket
11320mm dia Socket
114Providing fitting and fixing 32 mm to 50 mm service HDPE saddle all complete job, as per approved design, specification and direction of E/I.
115Dismantling pucca brick or lime work including stacking serviceable materials in countable stacks within 15m- Lead and disposal of unserviceable materials with leads all complete as per direction of E/I.
116Providing P.C.C. M-150 in nominal mix of (1:2:4) in foundation with approved quality of stone chips do-doall complete as per building specification and direction of E/I.
117Carriage of materials-
118Cement upto 10 KM Lead
119Sand upto 10 KM Lead
120Stoneupto 10 KM Lead
121O&M
122O &M cost for 1st Year (Excluding Repair Charge)
123O &M cost for 2ndYear
124O &M cost for 3rdYear
125O &M cost for 4th Year
126O &M cost for 5thYear
127Provision of One No SIM Card its recharging for RMC
128Add GST @ 12 % of Estimated Cost
129Add Labour Cess 1 %
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail