Upgradation And 5 Years Maintenance Of Diksal To Jamgaon To Harijanwasti Road Km 0 / 000 To 4 / 590 And Nh-61 To Wadgaonamalijamgaon To Dahitanegunjal Road Km 9 / 110 To 13 / 610 Tal.Parner Dist.Ahmednagar
Tender Value
Ref. Documents
Estimated cost
Bid Submission
02 Aug 2021
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
16800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Parner → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Upgradation And 5 Years Maintenance Of Diksal To Jamgaon To Harijanwasti Road Km 0 / 000 To 4 / 590 And Nh-61 To Wadgaonamalijamgaon To Dahitanegunjal Road Km 9 / 110 To 13 / 610 Tal.Parner Dist.Ahmednagar
BOQ
| Sl. No. | Item Description |
| 1 | Upgradation and 5 Years Maintenanceof Road From Diksal to Jamgaon to Harijanwasti (Part- Diksal to Jamgaon), Km 0/000 to 4/590, Taluka -Parner,District:- Ahmednagar Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 milimeter, removal of stumps of such trees cut earlierand disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 meter including removal and disposal of top organic soil not exceeding 150 milimeter in thickness as per Technical Specification Ministry Of Rural Development 2014 Clause 201. By mechnical means (A) In area Non of thorny jungleAnd As Directed by Engineer Incharge |
| 2 | Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 milimeter, removal of stumps of such trees cut earlierand disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 meter including removal and disposal of top organic soil not exceeding 150 milimeter in thickness as per Technical Specification Ministry Of Rural Development 2014 Clause 201.By mechnical means(B) In area of thorny jungle And As Directed by Engineer Incharge |
| 3 | Excavation for roadwork in soil with hydraulic excavator of0.9 cubicmeter bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with a lift upto 1.5 meter and lead more than 100 meter as per Technical Specification Ministry Of Rural Development 2014 Clause 302.3And As Directed by Engineer Incharge |
| 4 | Excavation for roadway in ordinary rock with hydraulic excavator of 0.9 cubicmeter bucket capacity including cutting and loading in tippers, transporting to embankment site with a lift upto 1.5 meter and lead above 100 meter, trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections as per Technical Specification Ministry Of Rural Development 2014 Clause 302.3.5 And As Directed by Engineer Incharge |
| 5 | Excavation for roadway in hard rock (requiring blasting) by drilling, blasting and breaking, trimming of bottom and side slopes in accordance with requirements of lines, grades and cross-sections, loading and disposal of cut rock with a lift upto 1.5 meter and leads upto 1000 meter as per Technical Specification Clause 302.3.5 And As Directed by Engineer Incharge |
| 6 | Excavation for roadway in hard rock (blasting prohibited) with rock breakers including breaking rock, loading in tippers and disposal with a lift upto 1.5 meter and lead upto 1000 metres, trimming bottom and side slopes in accordance with requirements of lines, grades and cross- sections as per Technical Specification Clause 302.3.5 And As Directed by Engineer Incharge |
| 7 | Scarifying existing bituminous surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and leads upto 1000 m as per Technical Specification Clause 301.4. as per Technical Specification Clause 301.4 And As Directed by Engineer Incharge |
| 8 | Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Ministry Of Rural Development 2014 Clause 301.5And As Directed by Engineer Incharge |
| 9 | Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 meter, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 lead more than 250 metre as per Technical Specification Ministry Of Rural Development 2014 Clause 301.5And As Directed by Engineer Incharge |
| 10 | Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 as per Technical Specification Ministry Of Rural Development 2014 Clause 303.1. And As Directed by Engineer Incharge |
| 11 | Loosening, Levelling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 milimeter, mixed with water at optimum moisture content and then compacted by rolling so as to achieve minimum dry density as given in Tables 300.1 and 300.2 for embankment construction as per Technical Specification Clause 301.4.1.And As Directed by Engineer Incharge And As Directed by Engineer Incharge |
| 12 | Construction of Granular sub-base grade -II by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator and compacting with vibretary wheelroller to achieve thedesired density, complete as per Technical Specification Ministry Of Rural Development 2014 Clause 401. And As Directed by Engineer Incharge |
| 13 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with threewheel 80-100 kilonewton static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Water bound macadum Grading 2as per Technical Specification Ministry Of Rural Development 2014 Clause 405. For - By Mechanical Means And As Directed by Engineer Incharge |
| 14 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405 |
| 15 | Providing and applying primer coat with Bitumen emulsion (SS-1)on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.90- 1.2 kg/sqm using mechanical means as per Technical Specification Clause 502. |
| 16 | Providing and applying tack coat with Bitumen emulsion (Rapid setting-1) using emulsion distributor at the rate of 0.20 to 0.25 kilogram per square meter on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503. And As Directed by Engineer Incharge |
| 17 | Providing, laying and rolling of open-graded premix carpet of 20 milimeter thickness composed of 13.2 milimeter to 5.6 milimeter aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kilonewton static roller capacity, finished to required level and grades to be followed by seal coat of either Type Aas per Technical Specification Ministry Of Rural Development 2014 Clause 506. For -Case - IIBy Mechanical MeansBitumen (S-65)Viscosity Grade-30 (1.46 kilogram per squaremeter) And As Directed by Engineer Incharge |
| 18 | Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type Aas per Technical Specification Ministry Of Rural Development 2014 Clause 508 Case - I:Type A Bitumen (S-65)Viscocity grade-30 by Mechanical Means (0.98 kilogram per squaremeter) And As Directed by Engineer Incharge |
| 19 | Construction ofun-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design,laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and etc...and Technical Specification Clause 1501 And As Directed by Engineer Incharge |
| 20 | Earthwork in excavation for structures as per drawing and technical specifications Ministry Of Rural Development 2014 Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 meter, dressing of sides and bottom and backfilling in trenches with excavated suitablematerial. Ordinary soil And As Directed by Engineer Incharge |
| 21 | Earthwork in excavation for structures as per drawing and technical specifications Ministry Of Rural Development 2014 Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 meter, dressing of sides and bottom and backfilling in trenches with excavated suitablematerial. Ordinary rock (not requiring blasting) Upto 3 meter depth And As Directed by Engineer Incharge |
| 22 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitablematerial. Hard rock (blasting prohibited) Upto 3 meter depth And As Directed by Engineer Incharge |
| 23 | Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 Rubble soling with Rubble And As Directed by Engineer Incharge |
| 24 | Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 Plane cement concreate grade M 10 Nominal mix 1:3:6 And As Directed by Engineer Incharge |
| 25 | Providing concrete for plain/reinforced concrete in sub structure complete as per drawings and technical specifications Ministry Of Rural Development 2014 Clause 802, 803, 804, 805, 806, 807, 1202 & 1203, 1204Plain cement concreate grade M 15Nominal mix (1:2.5:5) And As Directed by Engineer Incharge |
| 26 | Filling annular space around footing in rock as per technical specification Clause 1203.4.3. In M15 And As Directed by Engineer Incharge |
| 27 | Providing concrete for plain/reinforced concrete M15 in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 And As Directed by Engineer Incharge |
| 28 | Providing and laying reinforced cement concrete in sub structure as per drawing and technical specifications MORD 2014Clauses 800, 1205.4 and 1205.5 R.C.C grade M 20 For nominal mix 1:1:5:3 And As Directed by Engineer Incharge |
| 29 | Providing and laying reinforced cement concrete in superstructure as per drawing and technical specifications MORD 2014Clauses 800, 1205.4 and 1205.5 R.C.C grade M 25 And As Directed by Engineer Incharge |
| 30 | Backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification MORD 3014 Clause 1204.3.8 with Granular material And As Directed by Engineer Incharge |
| 31 | Dewatering including diversion of stream, providing cofferdams, bunds, etc. as may be necessary for foundation and other parts of the work and bailing out water during and after excavation as required. And As Directed by Engineer Incharge |
| 32 | Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granularmaterial in single row includingfixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1106. B. 1000 milimeter Non pressure 3 Class As per Technical Specification Ministry Of Rural Development 2014 Cluase No. 1100 And As Directed by Engineer Incharge |
| 33 | Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granularmaterial in single row includingfixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1106. D. 600 milimeter Non pressure 3 Class As per Technical Specification Ministry Of Rural Development 2014 Cluase No. 1100 And As Directed by Engineer Incharge |
| 34 | Providing and laying reinforced cement concrete pipe Non pressure2 for culverts on first class bedding of granularmaterial in single row includingfixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1106. D. 600 milimeter Non pressure 2 ClassAs per Technical Specification Ministry Of Rural Development 2014 Cluase No. 1100 And As Directed by Engineer Incharge |
| 35 | Providing and laying cement concrete wearing course M30 grade Excluding reinforcement complete as per drawing and technical specifications Clauses 800 and 1206.3 And As Directed by Engineer Incharge |
| 36 | Supplying, fitting, and placing TMT bar reinforcement in superstructure complete as per drawing and technical specifications Clauses 1002, 1010 and 1202 And As Directed by Engineer Incharge |
| 37 | Supplying, fitting and placing TMT bar reinforcement (Fe 415) in sub structure complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202 And As Directed by Engineer Incharge |
| 38 | Providing and laying 0.90 meter thick metal mat consisting of rubble, oversize metal and normal size metal in specified thickness as per detailed drawing including supplying all materials, hand packing of rubble, spreading metal in layers and hard murum including watering and compaction with power roller etc. complete. And As Directed by Engineer Incharge |
| 39 | Providing Tar paper bearing of approved quality in proper size etc. complete And As Directed by Engineer Incharge |
| 40 | Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade as per drawings and Technical Specification Clause 170 ii) English and Roman( I.No.10.1 II P.No.38 ) As per Technical Specification MORD 2014 Cluase No. 1402. And As Directed by Engineer Incharge |
| 41 | Filler Joint.Providing Expansion Joints with 25 mm thick bituminous pad as per detailed drawing And As Directed by Engineer Incharge |
| 42 | Providing trap/ granite/ quartzite/ gneiss rubble filling behind theabutment, returns or wings. And As Directed by Engineer Incharge |
| 43 | Painting two coats including primer coat after filling the surface with synthetic enamel paint in all shades on new, plastered / concrete surfaces as per drawing and Technical Specification Clause 1701 ( I.No.10.5 P.No.39 ) As per Technical Specification MORD 2014 Cluase No. 1402. And As Directed by Engineer Incharge |
| 44 | Providing weepholes in brick masonry / stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 milimeter dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specificationClauses 614, 709, 1204.3.7 A.C. pipe 100milimeter Dia And As Directed by Engineer Incharge |
| 45 | Providing and laying pitching on slopes laid over prepared filter media as per drawing and technical specifications Clause 1303 And As Directed by Engineer Incharge |
| 46 | Reinforced cement concrete M15grade kilometre stone/local stone of standard design as per Indian Road Congress:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Ministry Of Rural Development 2014 Clause 1703Ordinary Kilometer Stone (Precast) And As Directed by Engineer Incharge |
| 47 | Reinforced cement concrete M15grade kilometre stone/local stone of standard design as per Indian Road Congress:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Ministry Of Rural Development 2014 Clause 1703200 meter stone (precast) And As Directed by Engineer Incharge |
| 48 | Reinforced cement concrete M15 grade boundary pillars/local stone of standard design as per Indian Road Congress:25, fixed in position including finishing and lettering but excluding painting as per drawing and Technical Specification Clause 1704. And As Directed by Engineer Incharge |
| 49 | Providing and fixing a typical Mukhya Mantri Gram Yojana Citizen information board as per specification provided on detailed drawing of National Road Ruler Devlopment Agency having frame size of 2500 x 1150 millimeter with 75 millimeter square or round steel tube for support fixed in a concrete block of 60 x 60 x 75 centimeter size. Information as provided in drawing of National Road Ruler Devlopment Agency shall be displayed on a Galvanised Iron sheet of appropriate thickness and fixed at steel frame with 5 mm steel plate. All lettering and painting arrows border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and coloured as mentioned in detailed drawing. All sections of framed posts and steel tube shall be painted with primer and two coat of epoxy paint as per drawings.Citizen Information Board And As Directed by Engineer Incharge |
| 50 | Providing and fixing of typical Mukhya Mantri Gram Sadak Yojana informatory sign board with Logo as per Ministry Of Rural Development specifications and drawing. Three Mild steel Plates of 1.6 mm thick, top and middle plate duly welded with Mild steelflat iron 25Millimeter x 5meter size on back on edges.The lower plate will be welded with Mild steel angle iron frame of 25 Millimeter x 25 Millimeter x 5 Millimeter. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75Millimeter x 75 Millimeter of 12 Steel wire Gause sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450Millimeter x 450Millimeter x 600Millimeter, 600Millimeter below ground level.The top most diamond plate will be welded to middle plate by 47Millimeter x 47Millimeter of 12 Steel wire Gauge steel plate tube.All Mild steel will be stove enameled on both sides.Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour.All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1\"Logo\" of Mukhya Mantri Gram Sadak Yojana Project And As Directed by Engineer Incharge |
| 51 | Direction and Place identification signs with size up to 0.9 squaremeter size board (Village name board)Semi-Reflective Traffic signs Providing and erecting direction and place identifications of semi reflective sign boards as per IRC:67 made of 2 mm thick Mild steel Sheet duly stove enameled paint in white colour in front and grey colour on back with red reflective border of 70 milimeter width and required message, letters, figures with reflective engineering grade tape as per Ministry Of Rural Development specifications of required shade and colour.Supported and welded on 47 milimeter x 47milimeter of 12 SWG Squaretube of 3050 mm height duly strengthened by 25 milimeter x 5 milimeter M/s flat iron on edges on back firmly fixed to the ground by means of properly designed foundations with M-15 grade cement concrete 450 milimeter x 450 milimeter x 600 milimeter, 600milimeter below ground level as per approved drawing and Technical Specification Clause 1701.And As Directed by Engineer Incharge |
| 52 | Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per Indian Road Congress 67 made of 1.5milimeter thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of Ministry Of Rural Development for Rural Roads of required shade and colour supported and welded on 47milimeter x 47milimeter x 12 Steel wire Gauge sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 grade cement concrete 450x450x600 milimeter, 600 milimeter below ground level as per approved drawing Ministry Of Rural Development 2014 Clause 1701.2.2 a. 600 milimeter equilateral triangular And As Directed by Engineer Incharge |
| 53 | Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per Indian Road congress 67 made of 1.5 milimeter thick Mild steelSheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of Ministry Of Rural Development for Rural Roads of required shade and colour supported and welded on 47milimeter x 47 milimeter x 12 Steel wire gauge sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 grade cement concrete 450x450x600 milimeter, 600 milimeter below ground level as per approved drawing Ministry Of Rural Development 2014 Clause 1701.2.2 c. 600 x 450 milimeter Rectangular And As Directed by Engineer Incharge |
| 54 | Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47 mm x 12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 grade cement concrete 450x450x600 mm, 600 mm below ground level as per approved drawing Clause 1701.2.2 600mm circular And As Directed by Engineer Incharge |
| 55 | Painting lines, dashes, arrows, etc. on roads in two coatson new work with ready mixed road marking paint conforming to IS:164 on bituminous/concrete surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control as per drawing and Technical Specification Clause 1702 And As Directed by Engineer Incharge |
| 56 | STANDARD METAL DELINEATOR Supply and Installation of Road delienators ( Road way Delienators ) as per MORT&H clause 806.The structure shall be manufactured in roll forming process and shall have height not less than 800 mm above the ground, width not less than 100 mm and shall extend not more than 300mm below the ground while being installed in confirmation with IRC:79 1981or as directed by engineer in charge.The delineator shall be painted with powder coat of minimum 40 microns thickness for protection against corrosion, on top of which Type XI retro reflective sheeting shall be pasted on both sides.The delienator shall consist minimum retro reflective unit exposed area of 330 cm2 white color, full cube corner micro prismatic non-metallic retro reflective sheeting on each side conforming with IRC 67 2012 and meeting the coefficient of retro reflection values as per ASTM D 4956 Type XI table specification.The front and back faces of the delineator should be curved with a radius of not more than 200 mm and with delta angle (or central angle of curve) lying between 20o and 30o, to increase the visibility of the delineator for vehicles moving in continuous curves. The delineator shall have grooves across the length to make the reflective sheets vandal-proof. And As Directed by Engineer Incharge |
| 57 | Providing and fixing in position Pipe Railing consisting of IS Rolled steel joist posts designation IS MB 100 (100x75) at 2.5 m interval and three rows of 50 mm dia steel pipes (light) including fixing in position on bridge deck complete as per drawing and technical specifications Clause 1208.2 And As Directed by Engineer Incharge |
| 58 | Painting two coats including prime coat with epoxy paint of approved brand on concrete/steel surfaces after through cleaning of surface to give an even shade as per drawing and Technical Specification Clause 1701 And As Directed by Engineer Incharge |
| 59 | Providing white and colour washing to road side trees in 2 coats in 2 bands of white and one red band at centre of 30 cm height each including preparing the surface, cost of material, conveying etc. complete. And As Directed by Engineer Incharge |
| 60 | A,W : Metal Beam Crash Barrier (Providing and erecting a \"W \"metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip cess, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 810)And As Directed by Engineer Incharge |
| 61 | Providing and laying ofBoulder apron laid in wire crates with 4 mm dia GI wire confirming to IS-280 and IS 4826 IN 100 mm x 100 mm mesh (woven diagonally) including 10 percent extra for laps and joints laid with stone boulders weighing not less than 25 kg each as per drawing and technical specification clause 1301And As Directed by Engineer Incharge |
| 62 | B) Improvement of Road from NH 61 to wadgaon Amali Jamgaon to Dahitane Gunjal,(Part- Jamgaon to Daithane Gunjal) Km 9/110 to 13/610, (proposed 4.5 km) Taluka -Parner,District:- Ahmednagar Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 milimeter, removal of stumps of such trees cut earlierand disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 meter including removal and disposal of top organic soil not exceeding 150 milimeter in thickness as per Technical Specification Ministry Of Rural Development 2014 Clause 201. By mechnical means (A) In area Non of thorny jungleAnd As Directed by Engineer Incharge |
| 63 | Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 milimeter, removal of stumps of such trees cut earlierand disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 meter including removal and disposal of top organic soil not exceeding 150 milimeter in thickness as per Technical Specification Ministry Of Rural Development 2014 Clause 201.By mechnical means(B) In area of thorny jungle And As Directed by Engineer Incharge |
| 64 | Excavation for roadwork in soil with hydraulic excavator of0.9 cubicmeter bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with a lift upto 1.5 meter and lead more than 100 meter as per Technical Specification Ministry Of Rural Development 2014 Clause 302.3And As Directed by Engineer Incharge |
| 65 | Excavation for roadway in ordinary rock with hydraulic excavator of 0.9 cubicmeter bucket capacity including cutting and loading in tippers, transporting to embankment site with a lift upto 1.5 meter and lead above 100 meter, trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections as per Technical Specification Ministry Of Rural Development 2014 Clause 302.3.5 And As Directed by Engineer Incharge |
| 66 | Excavation for roadway in hard rock (requiring blasting) by drilling, blasting and breaking, trimming of bottom and side slopes in accordance with requirements of lines, grades and cross-sections, loading and disposal of cut rock with a lift upto 1.5 meter and leads upto 1000 meter as per Technical Specification Clause 302.3.5 And As Directed by Engineer Incharge |
| 67 | Excavation for roadway in hard rock (blasting prohibited) with rock breakers including breaking rock, loading in tippers and disposal with a lift upto 1.5 meter and lead upto 1000 metres, trimming bottom and side slopes in accordance with requirements of lines, grades and cross- sections as per Technical Specification Clause 302.3.5 And As Directed by Engineer Incharge |
| 68 | Scarifying existing bituminous surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and leads upto 1000 m as per Technical Specification Clause 301.4. as per Technical Specification Clause 301.4 And As Directed by Engineer Incharge |
| 69 | Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Ministry Of Rural Development 2014 Clause 301.5And As Directed by Engineer Incharge |
| 70 | Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 meter, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 lead more than 250 metre as per Technical Specification Ministry Of Rural Development 2014 Clause 301.5And As Directed by Engineer Incharge |
| 71 | Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 as per Technical Specification Ministry Of Rural Development 2014 Clause 303.1. And As Directed by Engineer Incharge |
| 72 | Construction of Granular sub-base grade -II by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator and compacting with vibretary wheelroller to achieve thedesired density, complete as per Technical Specification Ministry Of Rural Development 2014 Clause 401. And As Directed by Engineer Incharge |
| 73 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with threewheel 80-100 kilonewton static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Water bound macadum Grading 2as per Technical Specification Ministry Of Rural Development 2014 Clause 405. For - By Mechanical Means And As Directed by Engineer Incharge |
| 74 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405 |
| 75 | Providing and applying primer coat with Bitumen emulsion (SS-1)on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.90- 1.2 kg/sqm using mechanical means as per Technical Specification Clause 502. |
| 76 | Providing and applying tack coat with Bitumen emulsion (Rapid setting-1) using emulsion distributor at the rate of 0.20 to 0.25 kilogram per square meter on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503. And As Directed by Engineer Incharge |
| 77 | Providing, laying and rolling of open-graded premix carpet of 20 milimeter thickness composed of 13.2 milimeter to 5.6 milimeter aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kilonewton static roller capacity, finished to required level and grades to be followed by seal coat of either Type Aas per Technical Specification Ministry Of Rural Development 2014 Clause 506. For -Case - IIBy Mechanical MeansBitumen (S-65)Viscosity Grade-30 (1.46 kilogram per squaremeter) And As Directed by Engineer Incharge |
| 78 | Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type Aas per Technical Specification Ministry Of Rural Development 2014 Clause 508 Case - I:Type A Bitumen (S-65)Viscocity grade-30 by Mechanical Means (0.98 kilogram per squaremeter) And As Directed by Engineer Incharge |
| 79 | Dismantling Stone Masonry as per Technical Specification MORD 2014 Clause 202. Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of stone masonry, including disposal of unserviceable material and stacking the serviceable material with all lift and lead of 1000 m as per Technical Specification MORD 2014 Clause 202. Rubble Stone Masonry in Cement Mortar And As Directed by Engineer Incharge |
| 80 | Removing all types of Hume pipes and stacking within a lead of 1000 m including Earthwork and Dismantling of Masonry Works as per Technical Specification MORD 2014 Clause 202.Upto 600 mm dia Hume pipeAnd As Directed by Engineer Incharge |
| 81 | Earthwork in excavation for structures as per drawing and technical specifications Ministry Of Rural Development 2014 Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 meter, dressing of sides and bottom and backfilling in trenches with excavated suitablematerial. Ordinary soil And As Directed by Engineer Incharge |
| 82 | Earthwork in excavation for structures as per drawing and technical specifications Ministry Of Rural Development 2014 Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 meter, dressing of sides and bottom and backfilling in trenches with excavated suitablematerial. Ordinary rock (not requiring blasting) Upto 3 meter depth And As Directed by Engineer Incharge |
| 83 | Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 Rubble soling with Rubble And As Directed by Engineer Incharge |
| 84 | Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 Plane cement concreate grade M 10 Nominal mix 1:3:6 And As Directed by Engineer Incharge |
| 85 | Providing concrete for plain/reinforced concrete in sub structure complete as per drawings and technical specifications Ministry Of Rural Development 2014 Clause 802, 803, 804, 805, 806, 807, 1202 & 1203, 1204Plain cement concreate grade M 15Nominal mix (1:2.5:5) And As Directed by Engineer Incharge |
| 86 | Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granularmaterial in single row includingfixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1106. B. 1000 milimeter Non pressure 3 Class As per Technical Specification Ministry Of Rural Development 2014 Cluase No. 1100 And As Directed by Engineer Incharge |
| 87 | Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granularmaterial in single row includingfixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1106. D. 600 milimeter Non pressure 3 Class As per Technical Specification Ministry Of Rural Development 2014 Cluase No. 1100 And As Directed by Engineer Incharge |
| 88 | Providing and laying reinforced cement concrete pipe Non pressure2 for culverts on first class bedding of granularmaterial in single row includingfixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1106. D. 600 milimeter Non pressure 2 ClassAs per Technical Specification Ministry Of Rural Development 2014 Cluase No. 1100 And As Directed by Engineer Incharge |
| 89 | Providing and laying cement concrete wearing course M30 grade Excluding reinforcement complete as per drawing and technical specifications Clauses 800 and 1206.3 And As Directed by Engineer Incharge |
| 90 | Supplying, fitting, and placing TMT bar reinforcement in superstructure complete as per drawing and technical specifications Clauses 1002, 1010 and 1202 And As Directed by Engineer Incharge |
| 91 | Providing and laying pitching on slopes laid over prepared filter media as per drawing and technical specifications Clause 1303 And As Directed by Engineer Incharge |
| 92 | Reinforced cement concrete M15grade kilometre stone/local stone of standard design as per Indian Road Congress:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Ministry Of Rural Development 2014 Clause 1703Ordinary Kilometer Stone (Precast) And As Directed by Engineer Incharge |
| 93 | Reinforced cement concrete M15grade kilometre stone/local stone of standard design as per Indian Road Congress:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Ministry Of Rural Development 2014 Clause 1703200 meter stone (precast) And As Directed by Engineer Incharge |
| 94 | Reinforced cement concrete M15 grade boundary pillars/local stone of standard design as per Indian Road Congress:25, fixed in position including finishing and lettering but excluding painting as per drawing and Technical Specification Clause 1704. And As Directed by Engineer Incharge |
| 95 | Providing and fixing a typical Mukhya Mantri Gram Yojana Citizen information board as per specification provided on detailed drawing of National Road Ruler Devlopment Agency having frame size of 2500 x 1150 millimeter with 75 millimeter square or round steel tube for support fixed in a concrete block of 60 x 60 x 75 centimeter size. Information as provided in drawing of National Road Ruler Devlopment Agency shall be displayed on a Galvanised Iron sheet of appropriate thickness and fixed at steel frame with 5 mm steel plate. All lettering and painting arrows border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and coloured as mentioned in detailed drawing. All sections of framed posts and steel tube shall be painted with primer and two coat of epoxy paint as per drawings.Citizen Information Board And As Directed by Engineer Incharge |
| 96 | Providing and fixing of typical Mukhya Mantri Gram Sadak Yojana informatory sign board with Logo as per Ministry Of Rural Development specifications and drawing. Three Mild steel Plates of 1.6 mm thick, top and middle plate duly welded with Mild steelflat iron 25Millimeter x 5meter size on back on edges.The lower plate will be welded with Mild steel angle iron frame of 25 Millimeter x 25 Millimeter x 5 Millimeter. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75Millimeter x 75 Millimeter of 12 Steel wire Gause sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450Millimeter x 450Millimeter x 600Millimeter, 600Millimeter below ground level.The top most diamond plate will be welded to middle plate by 47Millimeter x 47Millimeter of 12 Steel wire Gauge steel plate tube.All Mild steel will be stove enameled on both sides.Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour.All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1\"Logo\" of Mukhya Mantri Gram Sadak Yojana Project And As Directed by Engineer Incharge |
| 97 | Direction and Place identification signs with size up to 0.9 squaremeter size board (Village name board)Semi-Reflective Traffic signs Providing and erecting direction and place identifications of semi reflective sign boards as per IRC:67 made of 2 mm thick Mild steel Sheet duly stove enameled paint in white colour in front and grey colour on back with red reflective border of 70 milimeter width and required message, letters, figures with reflective engineering grade tape as per Ministry Of Rural Development specifications of required shade and colour.Supported and welded on 47 milimeter x 47milimeter of 12 SWG Squaretube of 3050 mm height duly strengthened by 25 milimeter x 5 milimeter M/s flat iron on edges on back firmly fixed to the ground by means of properly designed foundations with M-15 grade cement concrete 450 milimeter x 450 milimeter x 600 milimeter, 600milimeter below ground level as per approved drawing and Technical Specification Clause 1701.And As Directed by Engineer Incharge |
| 98 | Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per Indian Road Congress 67 made of 1.5milimeter thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of Ministry Of Rural Development for Rural Roads of required shade and colour supported and welded on 47milimeter x 47milimeter x 12 Steel wire Gauge sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 grade cement concrete 450x450x600 milimeter, 600 milimeter below ground level as per approved drawing Ministry Of Rural Development 2014 Clause 1701.2.2 a. 600 milimeter equilateral triangular And As Directed by Engineer Incharge |
| 99 | Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per Indian Road congress 67 made of 1.5 milimeter thick Mild steelSheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of Ministry Of Rural Development for Rural Roads of required shade and colour supported and welded on 47milimeter x 47 milimeter x 12 Steel wire gauge sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 grade cement concrete 450x450x600 milimeter, 600 milimeter below ground level as per approved drawing Ministry Of Rural Development 2014 Clause 1701.2.2 c. 600 x 450 milimeter Rectangular And As Directed by Engineer Incharge |
| 100 | Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47 mm x 12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 grade cement concrete 450x450x600 mm, 600 mm below ground level as per approved drawing Clause 1701.2.2 600mm circular And As Directed by Engineer Incharge |
| 101 | Painting lines, dashes, arrows, etc. on roads in two coatson new work with ready mixed road marking paint conforming to IS:164 on bituminous/concrete surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control as per drawing and Technical Specification Clause 1702 And As Directed by Engineer Incharge |
| 102 | STANDARD METAL DELINEATOR Supply and Installation of Road delienators ( Road way Delienators ) as per MORT&H clause 806.The structure shall be manufactured in roll forming process and shall have height not less than 800 mm above the ground, width not less than 100 mm and shall extend not more than 300mm below the ground while being installed in confirmation with IRC:79 1981or as directed by engineer in charge.The delineator shall be painted with powder coat of minimum 40 microns thickness for protection against corrosion, on top of which Type XI retro reflective sheeting shall be pasted on both sides.The delienator shall consist minimum retro reflective unit exposed area of 330 cm2 white color, full cube corner micro prismatic non-metallic retro reflective sheeting on each side conforming with IRC 67 2012 and meeting the coefficient of retro reflection values as per ASTM D 4956 Type XI table specification.The front and back faces of the delineator should be curved with a radius of not more than 200 mm and with delta angle (or central angle of curve) lying between 20o and 30o, to increase the visibility of the delineator for vehicles moving in continuous curves. The delineator shall have grooves across the length to make the reflective sheets vandal-proof. And As Directed by Engineer Incharge |
| 103 | Providing and fixing in position Pipe Railing consisting of IS Rolled steel joist posts designation IS MB 100 (100x75) at 2.5 m interval and three rows of 50 mm dia steel pipes (light) including fixing in position on bridge deck complete as per drawing and technical specifications Clause 1208.2 And As Directed by Engineer Incharge |
| 104 | Painting two coats including prime coat with epoxy paint of approved brand on concrete/steel surfaces after through cleaning of surface to give an even shade as per drawing and Technical Specification Clause 1701 And As Directed by Engineer Incharge |
| 105 | Providing white and colour washing to road side trees in 2 coats in 2 bands of white and one red band at centre of 30 cm height each including preparing the surface, cost of material, conveying etc. complete. And As Directed by Engineer Incharge |
| 106 | A,W : Metal Beam Crash Barrier (Providing and erecting a \"W \"metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip cess, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 810)And As Directed by Engineer Incharge |
| 107 | Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granularmaterial in single row includingfixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1106. A. 1200 milimeter Non pressure 3 Class As per Technical Specification Ministry Of Rural Development 2014 Cluase No. 1100 And As Directed by Engineer Incharge |
AI Tender Summary
Tender Timeline
Jul 19, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedAug 02, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 04, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender