Public Administrative Department Local Bodies Closing in 0 days TDR #28556415

Construction Work Of Pump House No 03 Under Area Of Nagar Palika Parishad Seohara

Issued by Local Bodies · SEOHARA, Uttar Pradesh
Tender Value
6.11 Lakhs
Estimated cost
Bid Submission
06 Aug 2021
0 days left
EMD
61151
Bank guarantee accepted
Document Fee
2450
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
SEOHARA → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Construction Work Of Pump House No 03 Under Area Of Nagar Palika Parishad Seohara

BOQ

Name of Work:C/O WORK OF PUMP HOUSE NO 03 UNDERAREA OF NAGAR PALIKA PARISHAD SEOHARA
Sl. No. Item Description
1Dismantling RCC ansd RB work stacking of dismantled materials as directed by the engineer-in-charge with in a distence of 60 meter (200 Feet)
2Dismantling brick work orstone work or cement mortar and including stacking of dismantled materials as directed by the engineer-in-charge with in a distence of 60 m(200 Ft)
3Earth work in foundation inordinary soil (Loam clay or sand) including lift upto 1.50M and leadupto 30 M and led upto 30M and including filling watering and ramming of excavted earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the engineer in charge upto a distence of 30M from thefoundation trenches.
4Concrete with 4cm guage apporved stone ballast coarse sand and cement in proportion of 10:5:1 including supply of all materials labour and T&P etc . Required for proper completion of work.
5R.C.C. Work with cement approved coarse sand and 2cm gauge apporved stone grit in proportion of 1:1.5:3 for slab excluding supply of rainforcement and its bending but including its fixing and binding the same with 24B.W.G.I. binding wire and including all amterials,labour and T&P etc required for proper completion of work. bonding wire of supplied by the contractor free of cost . in RCC raft Foundation and footing with 4 cm Gauge stone ballaest
6Mild steel or iron work in plain work such as reinforced cincrete or reinforced brick work (when not include in over all rate) wrought to required shape as necessary including bending for proper complection of the work and also including supply of all steel and labour
7M-150 brick work in 1:3 (one cement and three coarse sand mortar) in foumdation and plinth including supply of all material, labour and T&P etc required for proper completion of work.
8R.C.C. Work with cement approved coarse sand and 2cm gauge apporved stone grit in proportion of 1:1.5:3 for slab excluding supply of rainforcement and its bending but including its fixing and binding the same with 24B.W.G.I. binding wire and including all amterials,labour and T&P etc required for proper completion of work. bonding wire of supplied by the contractor free of cost. but in lighter beam having span up to 6 m
9Mild steel or iron work in plain work such as reinforced cincrete or reinforced brick work (when not include in over all rate) wrought to required shape as necessary including bending for proper complection of the work and also including supply of all steel and labour
10R.C.C. Work with cement approved coarse sand and 2cm gauge apporved stone grit in proportion of 1:1.5:3 for slab excluding supply of rainforcement and its bending but including its fixing and binding the same with 24B.W.G.I. binding wire and including all amterials,labour and T&P etc required for proper completion of work. bonding wire of supplied by the contractor free of cost. but in RCC column
11Mild steel or iron work in plain work such as reinforced cincrete or reinforced brick work (when not include in over all rate) wrought to required shape as necessary including bending for proper complection of the work and also including supply of all steel and labour
12M-150 brick work in 1:3 (one cement and three coarse sand mortar) in foumdation and plinth including supply of all material, labour and T&P etc required for proper completion of work.
13R.C.C. Work with cement approved coarse sand and 2cm gauge apporved stone grit in proportion of 1:1.5:3 for slab excluding supply of rainforcement and its bending but including its fixing and binding the same with 24B.W.G.I. binding wire and including all amterials,labour and T&P etc required for proper completion of work. bonding wire of supplied by the contractor free of cost. but in lighter beam having span up to 6 m
14Mild steel or iron work in plain work such as reinforced cincrete or reinforced brick work (when not include in over all rate) wrought to required shape as necessary including bending for proper complection of the work and also including supply of all steel and labour
15R.C.C. Work with cement approved coarse sand and 2cm gauge apporved stone grit in proportion of 1:1.5:3 for slab excluding supply of rainforcement and its bending but including its fixing and binding the same with 24B.W.G.I. binding wire and including all amterials,labour and T&P etc required for proper completion of work. bonding wire of supplied by the contractor free of cost
16Mild steel or iron work in plain work such as reinforced cincrete or reinforced brick work (when not include in over all rate) wrought to required shape as necessary including bending for proper complection of the work and also including supply of all steel and labour
17Earth work in cutting or in embankment in ordinary soil, excavation to be form of regular pits not exeeding 1/2 meter (20\"\") depth and earth work in embankment to be in 20cm (8\"\") layers including ramming and dressing the surface to required levels and slopes and also including 1.50 M (5ft) lifts and 30 M (100ft) lead. The earth from cutting to be used in making embankment or to be deposited as spoil banks with in 30 M (100ft) distance as directed by the engineer in charge. Cartage of earth or yly ash when added to schedule item no. 253(a), 231(a) 1st km if lead distance is beyond 1/2 km for departmental work. (Upto 5 km)
1812mm thich plaster with one part of cement and three part of apporved coarse sand including supply of all materials, labour and completion of work.
19Concrete with 4cm guage apporved stone ballast coarse sand and cement in proportion of 10:5:1 including supply of all materials labour and T&P etc . Required for proper completion of work.
20Concrete with 2cm guage apporved stone ballast coarse sand and cement in proportion of 4:2:1 including supply of all materials labour and T&P etc . Required for proper completion of work.
21Providing wall putty on new surface with approvel quality material of berger/JK/Birla or similar make 2Coats
22Providing cement primer on new surface with approvel quality material including all cost of labour material T&P etc…..
23Finishing walls with superior quality water proof cement paint/snowcerm of apporved make and quality of new work with two coats to give even shade including preparing surface by the throughty cleaning and sand preparing and supply of allall cost of labour material T&P etc…..
24Mild steel or iron work in heavy sizes such as trusses, built up gates, door, frames, record racks roof work, gates etc wrought to required form including drilling holes, rivetting or welding where necessary, and also including supply of steel, bolts, nuts and all cost of labour material T&P etc.....
25Supply and fixing of flush door commercial quality conforming to I.S. 2202 part 1(1983) i/c fixing of wooden cleats and stoppers and i/c fixing of hinges bolts lockshandels springs fitting with necessary screws to be supplied 35 mm thick
26Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete100x58x1.90 mm
27Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete 150x10 mm
28Providing and fixing ISi marked oxidised M.S. door latches conforming to IS:5930 with screws etc. complete 250x20x6 mm
29Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete 125mm
30Applying primer coat over new steel and other metal surface before paint including preparing the surface by throuhly cleaning oil grease dirt and other foreign matter and scoured with wire bruses fine steel scrappers sand papering and knotting including coat of all and supply ofall cost of labour material T&P etc…..
31Painting first coat over priming coat on steel and other metal surface with superoio synthetic enamel paint of standered make brushing to givve an even shade and finished and including cleaning the surface all durt dust and other foreing metter sand paparing and strippinfg including cost matter and scoured with wire bruses fine steel scrappers sand papering and knotting including coat of all and supply ofall cost of labour material T&P etc…..
32Applying primer coat over new steel and other metal surface before paint including preparing the surface by throuhly cleaning oil grease dirt and other foreign matter and scoured with wire bruses fine steel scrappers sand papering and knotting including coat of all and supply ofall cost of labour material T&P etc…..
33Painting first coat over priming coat on woodmetal surface with superoio synthetic enamel paint of standered make brushing to givve an even shade and finished and including cleaning the surface all durt dust and other foreing metter sand paparing and strippinfg including cost matter and scoured with wire bruses fine steel scrappers sand papering and knotting including coat of all and supply ofall cost of labour material T&P etc…..
34Extra Labour charge and supply of cuttout 200 amp ampire meeter volt metter change over istarter fitting 16mm copper multi stand cabel fans bulb soket MCB main board i/c all complete……..
35R.C.C. Work with cement approved coarse sand and 2cm gauge apporved stone grit in proportion of 1:1.5:3 for slab excluding supply of rainforcement and its bending but including its fixing and binding the same with 24B.W.G.I. binding wire and including all amterials,labour and T&P etc required for proper completion of work. bonding wire of supplied by the contractor free of cost. but in RCC column
36Mild steel or iron work in plain work such as reinforced cincrete or reinforced brick work (when not include in over all rate) wrought to required shape as necessary including bending for proper complection of the work and also including supply of all steel and labour
37M-150 brick work in 1:3 (one cement and three coarse sand mortar) in foumdation and plinth including supply of all material, labour and T&P etc required for proper completion of work.
3812mm thich plaster with one part of cement and three part of apporved coarse sand including supply of all materials, labour and completion of work.
39Providing wall putty on new surface with approvel quality material of berger/JK/Birla or similar make 2Coats
40Providing cement primer on new surface with approvel quality material including all cost of labour material T&P etc…..
41Finishing walls with superior quality water proof cement paint/snowcerm of apporved make and quality of new work with two coats to give even shade including preparing surface by the throughty cleaning and sand preparing and supply of allall cost of labour material T&P etc…..
42extra labour charge for shuttering for dismantling existing RB slab and painting with oil paintsupply of allall cost of labour material T&P etc…..
43Concrete with 2cm guage apporved stone ballast coarse sand and cement in proportion of 4:2:1 including supply of all materials labour and T&P etc . Required for proper completion of work.
44add l.cess
45Add GST

AI Tender Summary

OUR REF NO 28556415
AUTHORITY Local Bodies
TENDER VALUE 6.11 Lakhs
LAST DATE 06-08-2021
Authority
Authority Name Nagar Palika Parishad
Work Description Construction Work Of Pump House No 03 Under Area Of Nagar Palika Parishad Seohara
Basic Detail
Tender No 580/E-TENDER/NPPS/2021 DATE 01.07.2021
Bidding Type Tender
Location
City SEOHARA
State Uttar Pradesh
Key Dates
Publish Date 16 Jul 2021
Submission Date 06 Aug 2021
Open Date 09 Aug 2021
Finance
Tender Value 6.11 Lakhs
Tender Fee 2450
EMD 61151
Exemption Not Available
Document List
d7e15b05-2a55-4604-a179-efbd70a194b2.html
BOQ_933590.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 16, 2021
11:30 IST

Tender Published

Tender notice published.

Completed
Aug 06, 2021
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Aug 09, 2021

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

d7e15b05-2a55-4604-a179-efbd70a194b2.html

xls

BOQ_933590.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders