Maintenance Of Various Colonies Of Nazul A / C-Ii Under Dwarka Zone. Maintenance Of Office Complex Of Hd-3 And Hd-8, Dda At B2b, Janakpuri.
Tender Value
27.68 Lakhs
Estimated cost
Bid Submission
26 Jul 2021
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Janakpuri → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Maintenance Of Various Colonies Of Nazul A / C-Ii Under Dwarka Zone. Maintenance Of Office Complex Of Hd-3 And Hd-8, Dda At B2b, Janakpuri.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. a) For thickness of tiles 10 mm to 25 mm |
| 2 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approvedmake, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of stepsand dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 3 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS : 15622 , of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. a) Size of Tile 800x800 mm |
| 4 | Providing & fixing of Sheer-dim-out blind in sheer & semi opaque / translucent shades in 100% polyester range ensure adequate darkening & privacy of room , revet shade width of70mm solid color & Sheer mesh 50 mm ,woven sheer /mesh & solid fabric horizontal drapes shall be of radiant 35mm X 25mm; polyester thickness of dual fabric min. of 0.34mm -0.43mm(+5%); weight : 110 -145 GSM. fabric composition is 100% polyester with colour fastness to light ( 4 to 5) grade for radiant,topaz range, of fabric in ivory, Beige ,radiant brown & black in customize sizes with the following specification of hardware mounting with a top roller tube of high strength extruded aluminium alloy anodized of 38mm-40mm OD(+-5%),with a minimum wall thickness of 1.0mm duly & Cassette Casing pelmet of size ( 3.5\" X 3.5\") with operative chain. Bottom rail comprises of triangular aluminium powder coated in white & off-white as a universal colour & fabric shall be pasted or enclose in the suitably created pocket along with the rolling tube.Note:- Brand will be approved by the Engineer-in-charge. |
| 5 | Providing roller blinds in a blackout fabric, & composition of fabric 100% polyster & vinyl coated or acralic coated openness factor/ light Transmission : 0% Opaque, Roller blinds in 100% polyester range of Blackout 3pass foam coating on back side ensure adequate darkening. Fabric thickness min.-0.40mm, weight of fabric: min-390GSM,Tensile Strength (Warp/Weft): WARP: 80DEN Twisted SD ;WEFT 300 DEN. With warranty Certificate. Degree of opacity 100% black out, Tearing Strength / color fastness to light -12kgf/5 Fire resistance certification of NFPA 701, BS 5867 Part 2,of required size and including head rails with fixed movement chain,PVC hook,caps,top channel,bottom roller etc. all complete whenever required as per direction of enginner in charge.Note:- Brand will be approved by the Engineer-in-charge. |
| 6 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: a) Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). |
| 7 | Providing and fixing 25 mm thick shutters for cup board etc. : Panelled or panelled & glazed shutters :Second class teak wood including ISI marked anodised aluminium butt hinges with necessary screws |
| 8 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: a)35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
| 9 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : a) 125 mm |
| 10 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : a) 250x10 mm |
| 11 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. a)Twin rubber stopper |
| 12 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. |
| 13 | Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. a)With semi perforated 12 mm thick micro tegular edged GRG false ceiling tiles. |
| 14 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.a)In cement mortar |
| 15 | Brick work with clay fly ash F.P.S (non modular) bricks of class designation in foundation & Plintha) Cement mortar 1:6 (1Cement: 6 Coarse Sand) |
| 16 | 12 mm cement plaster of mix : a) 1:6 (1 cement: 6 coarse sand) |
| 17 | 15 mm cement plaster on rough side of single or half brick wall of mix : a)1:6 (1 cement: 6 coarse sand) |
| 18 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : a)1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20 mm nominal size) |
| 19 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 20 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete |
| 21 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ litre. of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. a) Two coats. |
| 22 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. a)Two coats. |
| 23 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : a)Two or more coats on new work. |
| 24 | b)One or more coats on old work. |
| 25 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings andfixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. |
| 26 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :a)One urinal basin with 5 litre white P.V.C. automatic flushing cistern |
| 27 | Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead. |
| 28 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.a)Hot finished welded type tubes |
| 29 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 30 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
AI Tender Summary
Tender Timeline
Jul 16, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedJul 26, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 27, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender