Construction Of Cow Sanctuary At Kangain Tehsil Jaisinghpur Distt. Kangra H.P. ( Sh - C / O 2 Nos. Sheds, Fencing Of Cow Sanctuary, C / O Office Cum 4 Nos. Quarters With Toilets And Kitchen For Cow Sanctuary And C / O Water Tank ) ( Sub Work - C /
Tender Value
16.47 Lakhs
Estimated cost
Bid Submission
24 Jul 2021
0 days left
EMD
33000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaisinghpur → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Cow Sanctuary At Kangain Tehsil Jaisinghpur Distt. Kangra H.P. ( Sh - C / O 2 Nos. Sheds, Fencing Of Cow Sanctuary, C / O Office Cum 4 Nos. Quarters With Toilets And Kitchen For Cow Sanctuary And C / O Water Tank ) ( Sub Work - C / O Office And 4 Nos. Quarters With Toilets An Kitchen At Cow Sanctuary At Village Kangain
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundation and trenches in all heights and depths and in all kinds of soil including saturated soils comprising of pick work, jumper work, pick jumper work, blasting work both in soft and hard rock, chiseling / wedging out of rock (Where blasting is prohibited) or any other mixed variety of soil including shoring, strutting, de-watering and pumping or bailing out water (surface and sub soil water) up to any heights / depths or any quantum of water including slush which may arise during de-watering, removal of slush and stacking the serviceable and un-serviceable material clear from the edges of excavation and then returning the stacked soil in 15cm (fifteen centimeter) layers where required into plinth and side of foundation etcetera, consolidating each deposited layer by ramming & watering and then disposing of all surplus un-serviceable excavated earth as directed within all leads and lifts, by head-load, mechanicaltransportation or by any other mode of transportation with all cost of labours, machineries and disposed of material to be neatly dressed and leveledas per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government. |
| 2 | Filling in plinth with sand under floors including watering, ramming, consolidating and dressing completeas per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government. |
| 3 | Stone filling with hard stone of approved quality dry hand packed tightlyunder floor. as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government. |
| 4 | Providing and laying mechanically mixed and vibrated plain cement concrete 1:6:12 (one cement is to six sand is to twelve graded crushed stone aggregate 40 mm (forty millimeter) nominal size) and curing complete excluding the cost of form work in foundation and plinth as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government. |
| 5 | Providing and laying mechanically mixed and vibrated plain cement concrete 1:4:8 (one cement is to four sand is to eight graded crushed stone aggregate 40 mm (forty millimeter) nominal size) and curing complete excluding the cost of form work in foundation and plinth as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government. |
| 6 | Providing and laying mechanically mixed and vibrated plain cement concrete 1:4:8 (one cement is to four sand is to eight graded crushed stone aggregate 40 mm (forty millimeter) nominal size) and curing complete excluding the cost of form work in Walls including attached buttresses pilasters and their caps and bases and string courses etc. upto floor two level.as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government. |
| 7 | Providing form work with steel plates 3.15 mm (three point fifteen millimeter) thick welded with angle ironframe 30 X 30 X 5 mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centering below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Flat surfaces such as soffits of suspended floors, roofs, landings and the like floor etcetera upto any thicknessas per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government. |
| 8 | Providing and laying cement concrete work of grade M-20 ( M-twenty)design mix to obtained the minimum compressive strength of 20N /mm2 (Twenty newton per square millimeter) withcement contents not less than 320 kg (three hundred twenty kilogram) per cubic metre to give an even smooth surface mechanically mixed and vibrated including curing complete excluding cost of form work and reinforcement for reinforced concrete work insuspended floor ,roofs , landings , shelves and their supports balconies, beams ,girders , bressumers and cantilevers up to all floor levelas per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government. |
| 9 | Providing Tor steel reinforcement of TATA/TISCO/SAIL for RCC work including bending, bindingand placing in position completeup to all floor levels with cost of binding wire including carriage of materialwithin all leads, lifts and other incidental andas per the direction of the Engineer-In-Charge .The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government. |
| 10 | Square rubble masonary coursed with hard stone of approved quality in foundation and plinth in Retaining walls/Breast walls including rakingout joints in:- Cement Mortar 1:6 (1 Cement: 6 Sand) as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government. |
| 11 | Second class brick work usingcommon burnt clay building bricks in super structure in cement mortar 1:6 (one cement is to six sand) as perspecifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government. |
| 12 | Half brick masonry using second class common brunt clay building bricks insuper structure above plinth level to floor all levels in cement mortar 1:4 (one cement is to four sand) as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government. |
| 13 | Providing and fixingfactory made flush door shutter 35mm thick (thirty five millimetre), commercial both side i.e. non decorative, (Phenol bounded,termite resistant and water proof) core of block board construction with full frame of first class hard woodwell matched commercial 3 (three) ply veneer with vertical grain or cross bend & face veneer on both sides of flush door ISI marked No. IS2202 of kit ply/Alpro including black enameled M.S. butt hinges, Screws etcetera complete .As perspecifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government. |
| 14 | Providing and fixing M.S.( Mild Steel) plain grills of required pattern in window frames etcetera with M.S.Flats,20x5mm ( twenty into five millimeter) and 8 x 8 mm ( eight into eight millimeter) solid square or round bars, fixing to frames with round headed bolts and nuts or by screws or weldingas perspecifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government. |
| 15 | Providing and fixing M.S. sliding door bolt anodized transparent or dyed to required colour and shade with bolts and nuts screws etcetera complete 300 X 16 mm (three hundred into sixteen millimetre) size as per specifications approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. |
| 16 | Providing and fixing M.S tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etcetera complete as per specifications, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government. |
| 17 | 200 X 10 mm (two hundredinto ten millimeter) size |
| 18 | 150 X 10 mm (one hundred fifty into ten millimeter) size |
| 19 | 100 X 10 mm (one hundred fifty into ten millimeter) size |
| 20 | Providing and fixing M.S. handles anodized transparent or dyed to required colour and shadewith necessary screws etcetera complete as perspecifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government. |
| 21 | 125 mm (one hundred twenty five millimeter) size |
| 22 | 100mm (One hundred Millimetre) size |
| 23 | Providing and fixing oxidized 250mm size M/S. hooks and eyes complete in all respectcomplete as perspecifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government. |
| 24 | Providing and fixing angle iron door frames (Double rebate) manufctured from M.S angle section of 35x35x4mm and M.S. flat 50x4mm as design and drawing including jamb, lock jamb, beed and if required angle threshold of M.S. angles 50x5mm welded or regidly fixed by mnechanical means lugs with spitends to each jamb includng steel butt hinges 2.5mm thick with a provision of locking arrangment and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surfaces. as perspecifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government. |
| 25 | Providing and fixing steel glazed doors, windows and ventilators of standard rolled steel sections joints mitred and weldedand including iron fitting, including providing and fixing of glass pans with glazing clips and special metal sash putty of approved make complete including applying a coat of read lead paints within all leads, lifts of materials and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government. |
| 26 | Fixed steel window |
| 27 | Top hung windows. |
| 28 | Providing and fixing 40 mm (Forty millimetre) thick second class Deodar wood wire gauge shutters using galvanized MS wire gauge of IS gauge designation 85G with wire of dia 0.56 mm (Zero decimal five six millimetre) for doors, windows and clear story windows including bright finished black enameled iron hings with necessary screws as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government. |
| 29 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partition etc with PVC/neoprens gasket etc. complete as per the architectural drawings and the directions of Engineer-In_charge (cost of aluminium snap beading shall be paid in basic item.) Glazing with glass panes of 5.50mm thickness (weight not less than 13.75 kg/ sqm.) completeas per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government. |
| 30 | Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint of Asian/ Nerolac brushing to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matters with enamel paint of approval shade as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government. |
| 31 | Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil,grease,dirt and other foreign matterssand papering and knottingas required with ready mixed paint of Asian / Nerolac brushing wood primer as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government. |
| 32 | Painting two coats(excluding priming coat) on new wood and wood based surface with ready mixed enamel paint of Asian / Nerolac brushing to give an even shade including cleaning the surface of dirt, dust and other foreign matters sand paperingandKnotting with enamel paint other than white complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government. |
| 33 | 6mm (Six millimeter) thick cement plasters in ceiling with cement mortar 1:3 (One cement: Three sand) for all heights as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government. |
| 34 | 15 mm (Fifteen milimetre) thickcement plaster in single coat on rough side of brick/concretes/ stone walls for interior plastering up to all floorlevel including arises, internal angles, chamfers and /or rounded angles not exceeding 80mm (Eighty milimetre)in girth and finished even and smooth with cement mortar 1:6 (One cement isto six sand) as perspecification approved drawing , design, as per the entire satsifaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government. |
| 35 | Providing under layer for plinth protection of 75mm (seventy five millimetre) thick (unconsolidated) bed of dry brick / stone aggregate 40mm (forty millimetre) nominal size well rammed and consolidated and grouted with fine sand including preparation of ground as perspecifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. |
| 36 | Providing plinth protection 50mm (fifty millimetre) thick in cement concrete 1:3:6 (one cement is to three sand is to six graded stone aggregate 20mm(twenty millimetre) nominal size) as perspecifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana,toll tax, GST and all type of other taxes imposed by the Government. |
| 37 | Providing separately. and fixing vitreous China wash down, water closet squatting pan (Indian type W.C pan) size 580mm (Earth work, bed concrete, foot rest and trap to be measured and paid for separatelyas per approved specification and entire satisfaction of Engineer in charge.The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government. |
| 38 | Providing and fixing 10 to 12.50/15.00 ltr. (Ten to Twelve decimal Five zero/ Fifteen Litres) P.V.C. low level flushing cisternNo. 502 ISI marked 7231 of prayag in white shade of CERA with a pair of C.I. or M.S. brackets complete with fitting such as lead valve less syphon Dual flushing system 15mm ( fifteen millimetre) nominal size brass ball valve with polythene float C.P. brass handles Unions and couplings for connection with inlet outlet and over flow pipes 40mm (Forty millimetre) diameters C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately). as per specifications, approved drawing , design or as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana,toll tax, GST and all type of other taxes imposed by the Government. |
| 39 | Providing and fixing PVC100mm ( One hundred millimetre) P or S trap for water closet (squatting Pan) including jointing the trap with the Pan and soil pipe with approved adhesive as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkanatoll tax, GST and all type of other taxes imposed by the Government. |
| 40 | Providing and fixing in position with clamps etc; 32mm nominal size internal diameters galvanized steel tubes flush pipe for high/low level flushing cistern including connecting the flush pipe with cistern and closet and making good the walls and floors complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkanatoll tax, GST and all type of other taxes imposed by the Government. |
| 41 | Providing and fixingplastic seat (Solid type)and cover ofCERA for wash down water closet with C.P. brass hinges and rubber buffers solid type ( white plastic seat and cover) complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. |
| 42 | Providing and fixing ISI mark No 1025of CERA in white shadeflat back 550x400 (Five hundred fifty into four hundred millimetres) vitreous china wash basin white shade with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holesand making good the same but excluding fittings as perspecifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. |
| 43 | Providing and fixing 600x450x150mm size stainless steel kitchen sink with drain board super deluxe 6321 with C.I. or M.S. brackets painted white including cutting holes in walls and making good the same but excluding the cost of fitting as perspecifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. |
| 44 | Providing and fixing vitreous china padestal for wash basin complete recessed at the back for the reception of pipes and fittings: In white colour as perspecifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.: |
| 45 | Providing and fixing 32mm nominal size diameter rubber plug for wash basin (Heavy duty ).The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government. |
| 46 | Providing and fixing (32mmnominal size) diameters M.I. union for wash basin or sink .The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government. |
| 47 | Providing and fixing 32mm diameters P.V.C. waste pipe Supreme/finolex/prince waste pipe for wash basin or sink including brass check nut. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government. |
| 48 | Providing and fixing 100mm diametres C.P. Grating of Jal/Jaguar /ESS-ESS (Heavy duty makes ISI marked ) for gully / floor or Nahni trap including fitting in all respect The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government. |
| 49 | Providing and fixing C.P.(chromium plated) brass towel rail having size 600x20 mm of Jal/Jaguar/ ESS ESS / cera/ hindware complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws etcetra complete. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government. |
| 50 | Providing and fixing 600x120mm glass shelf (Heavy duty makes ISI marked IS No. 8931 & 8934) with C.P. brass brackets and guard rail complete fixed to wooden plugs with C.P. brass screws etcetra complete. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government. |
| 51 | Providing and fixing PVC water storage tankof syntax(marked triple layer)1000 ( One thousand) Liters net capacity with 40mm (forty millimetre) nominal size bore galvanized mild steel scour tube25mm (twenty five millimetre) nominal bore galvanized mild steel over flow pipe, G.I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground levelcomplete in all respect as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. |
| 52 | White washing with lime on undecorated wall surfaces and ceiling two coats to give and even shade including thoroughly bromming the surface to remove all dirt, dust mortar dirt and other foreign matter as per the direction of the Engineer-in Charge within all leads and lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government. |
| 53 | White washing with lime on decorated wall surfaces and ceiling one coats to give and even shade including thoroughly bromming the surface to remove all dirt, dust mortar dirt and other foreign matter as per the direction of the Engineer-in Charge within all leads and lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government. |
| 54 | Providing and fixing high pressure PVC spigot and socket, of supreme / Kishan / astral class \"B\" confirming to BS-13592 soil, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete.within all leads, liftsand other incidentals as per approved specifications drawing, design and as directed by the Engineer- in-charge.The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government. |
| 55 | 110mmnominal bore/diameter. |
| 56 | 75mm nominal bore/diameter |
| 57 | Providing and fixing P.V.C accessories Supreme/ prince/ Finolexfor Sewerage pipe conforming to IS No. 14735-99 P.V.C. Plain bendincluding carriage of material with in all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government. |
| 58 | P.V.C. Plain bend 110mmnominal bore/diameter. |
| 59 | P.V.C. Plain shoe 75mmnominal bore/diameter. |
| 60 | Providing and fixing PVC tees (Medium class) ISI marked including fixing with approved adhesive etc. complete as per approved drawing & design.including carriage of material with in all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government. |
| 61 | 110mm nominalsize/diameter. |
| 62 | 75mm nominal size/diameter. |
| 63 | Providing and fixing PVC heal rest Supreme/ prince/ Finolex including fitting the joints with approved adhesive mixure complete The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.. |
| 64 | 100mmnominal bore/diameters. |
| 65 | 75mm nominal bore/diameters |
| 66 | Providing and fixing P.V.C. coller of Supreme/prince/ Finolex including fixing with approved adhesive etcetra.complete The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government. |
| 67 | 110mmnominal bore/diameter |
| 68 | 75mm nominal bore/diameter |
| 69 | Providing and fixing PVC Cowl ISI marked i/c fixing with approved adhesive etc; complete within all leads, lift and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.. |
| 70 | 110mmnominal bore/diameters. |
| 71 | 75mm nominal bore/diameters |
| 72 | Providing and fixing 110mm (one Hundred ten milimetre) diameter on wall face P.V.C. (D-plast) rain water pipes 2.2mm ( Two decimal Two millimeter) thick of supreme/Finolex/Prince/ Relpipe/Relianceworking pressure not less than 4/6 kgs /cm2 (Four /Six kilogram) per square centimeter including filling the joints with approved adhesive complete as perspecifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government. |
AI Tender Summary
Tender Timeline
Jul 17, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedJul 24, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 26, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender