Military Engineer Services-MES has published Repair And Rewinding Of Ceilling Fan Exhaust Fan Kitchen Equipments In South Complex Repair And Maint Of Summer And Winter Appliances In North Complex At Ima Dehradun Repair And Rewinding Of Ceilling Fan Exhaust Fan Kitchen Equipments In South Complex R. Submission Date for this Tender is 14-08-2021. Kitchen Equipment Tenders in GE IMA Dehradun Uttarakhand. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 05-Aug-2021 | Amendment to NIT | Other | 07-08-2021 |
2 | 07-Aug-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 14-08-2021 |
Sl. No. | Item Description |
1 | Taking down Ceiling fan 1200 to 1400 mm sweep of any make and set aside in safe custody for rewinding at local workshop and fixing the same complete all as specified and directed. |
2 | Taking down exhaust fan/cabin fan/ wall mounted fan of any sweep and set aside in safe custody for rewindingat local workshop and fixing the same complete all as specified and directed |
3 | Rewinding of ceiling fan of any make with super enameled copper wire of same size including necessary varnishing of new winded coil insulation etc complete all as specified and directed of following sweeps:- |
4 | 1200 mm sweep ceiling fan |
5 | 1400 mm sweep ceiling fan |
6 | Re-winding of exhaust fan of any make with super enameled copper wire of same gauge as original including necessary varnishing to new winding coil insulation packing, overhauling, cleaning, greasing, reassembling and testing complete all as specified and directedfor the following sizes:- |
7 | 250 to 300 mm sweep |
8 | 350mm to 450 mm sweep |
9 | Re-winding of cabin fan/table fan upto 450mm sweep of any make with super enameled copper wire of same gauge as original including necessary varnishing to new winding coil insulation packing, overhauling, cleaning, greasing, reassembling and testing complete all as specified and directed |
10 | Gun metal bushes as per sample fixed in repair complete all as specified and directed |
11 | Capacitor 2.5 mfd 230 volt AC 50 HZ suitable for ceiling fan/ exhaust/cabin/table fan of any sweep fixed in repair complete all as specified and directed. |
12 | Capacitor 3.5 mfd 230 volt AC 50 HZ suitable for ceiling fan/ exhaust/cabin/table fan of any sweep fixed in repair complete all as specified and directed. |
13 | Capacitor 04 mfd 230 volt AC 50 HZ suitable for ceiling fan/ exhaust/cabin/table fan of any sweep fixed in repair complete all as specified and directed. |
14 | Capacitor 1/1.5 mfd 230 volt AC 50 HZ suitable for ceiling fan/ exhaust/cabin/table fan of any sweep fixed in repair complete all as specified and directed. |
15 | Ball bearings of ceiling fan of any sweep fixed in repair complete all as specified and directed of following sizes:- |
16 | Ball bearing No 6201 |
17 | Ball bearing No 6202 |
18 | Ball bearing No6203 |
19 | Ball bearing No 6204 |
20 | Ball bearing of suitable size of exhaust fan 300 to 450mm sweep fixed in repair complete all as directed. |
21 | Ball bearing of suitable size of wall mounted fan 600mm sweep fixed in repair complete all as specified and directed. |
22 | Taking down and Preparation of old painted body and blades of ceiling fan 1200 mm to 1400 mm sweep, cleaning foreign material, filling cavities etc and painting with one coat of synthetic enameled paint by spray painting and marking MES No with paint and hanging complete all as specified and directed. |
23 | Taking down and Preparation of old painted body and blades of exhaust fan 300 mm to 450 mm sweep, cleaning foreign material, filling cavities etc and painting with one coat of synthetic enameled paint by spray painting and marking MES No with paint and hanging complete all as specified and directed |
24 | Reel insulator of hard rubber of suitable size for ceiling fan fixed in repair complete all as specified and directed |
25 | PVC canopy of the ceiling fan with screwof any sizefixed in repair complete all as specified and directed |
26 | Down rod clamp in one piece or two piece with split pin, bolt , nut and washer as per sample fixed in repair complete all as specified and directed |
27 | Fan regulator electronic 100 watts, 5 step type 230 volts AC fixed in repair complete all as specified and directed. |
28 | Litedimmer type 1000 watt. Make:- Legrend Cat Part No 572740 or equivalent of Havels/ Anchor/Bajaj/Crompton/Usha |
29 | Fan regulator modular type, electronic 120 watts, step type, 230 volts as per sample complete fixed in repair complete all as specified and directed. |
30 | Nuts, bolts and washerset, 10mm dia, 75 mm long as per sample fixed in repair complete all as specified and directed |
31 | Down rodof rigid steel cunduit of 15mm dia 60cm long for hanging fan with two cut in end of one side pipe approx length 1/2" to 2" and two holes for entering flexible cable both side fixed in repair complete all as specified and directed |
32 | Down rodof rigid steel cunduit of 15mm dia 90cm long for hanging fan with two cut in end of one side pipe approx length 1/2" to 2" and two holes for entering flexible cable both side fixed in repair complete all as specified and directed |
33 | Down rodof rigid steel cunduit of 15mm dia 120cm long for hanging fan with two cut in end of one side pipe approx length 1/2" to 2" and two holes for entering flexible cable both side fixed in repair complete all as specified and directed |
34 | MS clamps with 40mmx4mm thick flat iron bent to shape any type having center two holes, nuts & bolts for hanging light fittings complete fixed in repair complete all as specified and directed |
35 | Exhaust fan blade metal/plasticset suitable for 250 to 300mm sweep as per samplefixed in repair complete all as specified and directed |
36 | Exhaust fan/wall mounted fan blade metalicset suitable for 450/600mm sweep as per samplefixed in repair complete all as specified and directed |
37 | Taking down ceiling fan and overhauling/servicing, cleaning, greasing, reassembling, hanging and testing of ceiling fan of any sweep 1200mm to 1400mm including cleaning and greasing material complete all as specified and directed |
38 | Taking down exhaust fan and overhauling/servicing, cleaning, greasing, reassembling and testing of Exhaust fans/wall mounted fans of any sweep (i.e. 250mm to 600mm) including cleaning and greasing/replacing any worn out part complete all as specified and directed. Note :-(i) For servicing purpose Machine oil/grease should be used of apprpriate make only duly passed by the Engineer - in-Charge.(ii)replacement of any worn out part like bearing/ bush/shaft will measured & paid separately) |
39 | Split pin of suitable size fixed on nuts & bolts complete all as specified and directed |
40 | Louvers for exhaust fan of 300mm sweep fixed in repair on wall complete all as specified and directed |
41 | Louvers for exhaust fan of 450mm sweep fixed in repair on wall complete all as specified and directed |
42 | Blade screws of suitable size or as per site requirement complete with washer complete all as specified and directed |
43 | Metal ceiling fan blade suitable for 1200 to 1400 mm sweepas per samplefixed in repair complete all as specified and directed |
44 | Shaft suitable for ceiling fan of any type/sizeas per sample complete fixed in repair complete all as specified and directed |
45 | Sheet metal enclosure, triple pole and neutral withthree pin and earth plug and socket with and including one single pole MCB 20. Amps, 240 volts,10 KAcomplete fixed in repair complete all as specified and directed. |
46 | Supply and fix in replacement of ceiling fan 1200 mm sweep, 230 volts 5h Hz, energy saving model single phase, copper wound motor, five star, pearl white in colour complete with blade, down rod , canopy and connected with ceiling rose etc complete all as specified and directed. Make:- ES40 Premium ofHavells & equivalent of Baja/Usha |
47 | Supply and fix in replacement of metal body exhaust fan 300 mm sweep, 900 rpm230 volts 5h Hz, energy saving model single phase copper wound motor, grey in colour complete with blade, box type louvers etc complete all as specified and directed. Make:- Turbojet SP of Havells and equivalent of Bajaj/Usha. |
48 | Supply and fix in replacement of plastic body exhaust fan 300 mm sweep, 1000 rpm230 volts 5h Hz, energy saving model single phase copper wound motor, grey in colour complete with blade, box type louvers etc complete all as specified and directed. Make:- Model No-Maxima DX 5 blade of Bajaj and equivalent of Havells/Usha. |
49 | Taking down unserviceable heating Element gas chullahof any size/capacity and S&F heating element 3KW 230 volts tria flangewith check nut 40 mm dia as per sample suitable for baine marry complete all as specified and directed |
50 | Taking down unserviceable heating Element gas chullahof any size/capacity and S&F heating element 5KW 230 volts tri flange with check nut 40 mm dia as per sample suitable for baine marry complete all as specified and directed |
51 | Taking down unserviceable thermostate any size and S&F thermostate thermal cut out single phase 240 volts as per sample suitable for baine marry complete all as specified and directed |
52 | Taking down unserviceable cutting blade any size and S&F cutting blade for bread cutting machine approximate length 30 to 35 cm as per samplecomplete all as specified and directed |
53 | Taking down unserviceable copper pipe 8mm dia and S&F copper pipe 8mm diasuitable for cooking range as per sample complete all as specified and directed. |
54 | Taking out existing defective starting capacitor and S&F, starting capacitor 8-30 MFD as per sample complete all as specified and directed. |
55 | Taking out existing defective starting capacitor and S&F, starting capacitor 30-50 MFD as per sample complete all as specified and directed. |
56 | Taking down unserviceable thermostat and S & F thermostat cut out 3 phase 415 volts suitable for dishwashing machine complete all as specified and directed. |
57 | Taking down unserviceable B type burnor any size and S&F B type burner 2 to 3 inch dia ISI marked as per sample complete all as specified and directed. |
58 | Taking down unserviceablepilot burner any size and S&F pilot burner 5mm to 20mm dia ISI marked as per sample complete all as specified and directed. |
59 | Taking down unserviceable rubber castors and S&F rubber castors with ball bearing 6 to 8 inch, capacity 500 Kgs suitable for food service trolly complete all as specified and directed. |
60 | Taking down unserviceable fan belt and S&F fan belt suitable for exhaust system complete all as specified and directedof following size:- |
61 | B-73 |
62 | B-69 |
63 | B-23 |
64 | Taking down unserviceableburner and S&F burner small size T-35 as per sample complete all as specified and directed. |
65 | Taking down unserviceable burner and S&F burner medium size T-35 as per sample complete all as specified and directed. |
66 | Taking down unserviceable burner and S&F burner big size G-8 as per sample complete all as specified and directed |
67 | Taking down unserviceable Chinese burner and S&F Chinese burner as per sample complete all as specified and directed |
68 | Taking down unserviceableLPG gas, regulator and S&F LPG gas high pressure regulator industrial screw type ISI marked complete all as specified and directed |
69 | Taking down unserviceableRotary switch of gas burner and S&F rotary switch single phase 240 volts 3 step (pole) 32 amps as per sample complete all as specified and directed. |
70 | Taking down unserviceable LPG gas connection pipe and S&F LPG gas connection pipe ISI Marked fibre thread bedded industrial type including GI clip on both ends complete all as specified and directed |
71 | Disconnecting the electric connection opening cutting the burnt wire from motor and clean slots for rewinding with new copper wire of same size varnishing, drying complete and refixing in the original position complete all as specified and directed of following size of exhaust system of kitchen motor:- |
72 | 1 HP motor single phase |
73 | 2 HP motor single phase |
74 | 7.5 HP motor 3 phase |
75 | 10 HP motor 3 phase |
76 | Replacement of canvas cloth of exhaust and fresh air system (as per existing sample) including frame & revetting work complete all as specified and directed. |
77 | Ball bearing (FK-207) with cover for blower shaft suitable for exhaust system as per sample, complete fixed in repair all as specified and directed. |
78 | Servicing of wet grinder machines of capacity 5 ltr including Greasing & replacement ofbearings, fan belts, nut bolts as per direction of Engineer-in-Charge complete all as specified and directed. |
79 | Servicing of wet grinder machines of capacity 15 ltr including Greasing & replacement ofbearings, fan belts, nut bolts as per direction of Engineer-in-Charge complete all as specified and directed. |
80 | Minor repair and servicing of electric driven single phasemotorin Attakneadingmachineand fixingrotating handlesuch as adjustment, and testing of capacity 2 HP motor,Greasing &replacement of bearings, fan belt, nut bolts if any required complete all as specified and directed. |
81 | Servicing of mincingmachineGreasing & replacement ofbearings, fan belt, nut bolts as required and testingcomplete all as specified and directed |
82 | Maintenance and servicing ofpotato pillar machinewithweaving and fixing new surface in machineincluding, Greasing & replacement of bearings, fan belt, nut bolts as requiredand testing as directed. |
83 | Servicing of Exhaust system & Fresh air system, cleaning of dust with suitbale chemical at both ends including oiling & greasing of motor and attending minor repairs as required complete all as specified and directed. |
84 | Taking down air curtain for repair and servicing and refixing after repair / servicing at its original position complete all as specified and directed (Note- spare parts of air curtain shall be measured and paid saperately under respetive item) |
85 | Rewinding of air curtain blower motor 2 HP single phase with superenameled copper winding wire of existing guagecomplete all as specified and directed. |
86 | Supply only motor ball bearing with cover of blower shaft of existing size. |
87 | Supply only blower fan blades of existing size |
88 | Wall fans 230 Volts single phase oscillating 400 mm sweep suitable for wall mounting complete all as specified and directed. Make:- Havells, Model No. Platina HS or equivalent of Bajaj/Usha. |
89 | Pedestal fan 230 Volts single phase oscillating 400 mm sweep 3 blades with remote free standing complete all as specified and directed. Make:- Havells, Model No. Sprint LED remote or equivalent of Bajaj/Usha. |
90 | Wall fans 230 Volts single phase oscillating 400 mm sweep with remote white suitable for wall mounting complete all as specified and directed. Make:- Havells, Model No. Platina Remote (SKU- FHWPTRCWHT16) or equivalent of Bajaj/Usha. |
91 | Supply and fix in replacement of ceiling fan 1200 mm sweep, 230 volts 5h Hz, energy saving model single phase, copper wound motor, five star, pearl white in colour with remote complete with blade, down rod , canopy and connected with ceiling rose etc complete all as specified and directed. Make:- Havells, Model No. EPlatina Remote (SKU- FHWPTRCWHT16) or equivalent of Bajaj/Usha. |
92 | MCCB,100 Amps, 4 pole, 415 volts with rupturing capacity 16 KA with thermal magnetic release and adjustable overload setting including taking out existing unserviceable MCCB complete all as specified anddirected |
93 | MCCB,125 Amps, 4 pole, 415 volts with rupturing capacity 16 KA with thermal magnetic release and adjustable overload setting including taking out existing unserviceable MCCB complete all as specified anddirected |
94 | Earthing completewith galvanized ironearth plate electrode 600mm x 600mm x 6mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) vertically, with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of MES Schedule Part-I connecting to earthing test point & to main switch board andtesting on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board etc with & including adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded BT stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, internal surface of concrete shall be given 10mm thick plaster in CM 1:4, pre cast RCC (1:2:4)type B-1 (using 20mm graded BTstone aggregate) 40mm thick cover,reinforced with 8mm dia deformed or TMT bars 3 Nos both way with 12mm dia round bar handle, GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 15mm dia GI light grade earth lead protection pipe etc complete all as specified and directed. NOTE: (i) Earth lead wire and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item. (ii) Any joints in earth lead from earth electrode to test point shall not be allowed/permitted. (iii) If the desired earth resistance is not found within permissible limit shall be re done by contractor at no extra cost. |
95 | Taking down unserviceable storage type electric water heater (Geysers) afterisolating electric supply of capacity 25/35litres from site for desclaing the inner container with cleaning solution includingrefixing in same position or where directedcomplete all as specified andas directed. |
96 | Taking down unserviceable storage type electric water heater (Geysers) afterisolating electric supply of capacity 50litres from site for desclaing the inner container with cleaning solution includingrefixing in same position or where directed complete all as specified andas directed. |
97 | Taking down unsv storage type electric water heater (Geysers) any make afterisolating electric supplycapacity 100/150litres from site for desclaing the inner container with cleaning solution includingrefixing in same position or where directedcomplete all as specified andas directed. |
98 | Taking down unserviceable storage type electric water heater (Geysers) from siteof capacity25/ 35/50 ltr for necessary repair of inner tank for water leakage and including with stainless steel weldingand refixingin same position or as directedand testing complete all as specified andas directed. |
99 | Stainless steel inner container (tank) of capacity 25/35 litres and testing complete of make. Pearl, Ditz, Racold, Gilco, Sahasincluding taking down of old unserviceable tank complete all as directed. |
100 | Stainless steel outer container for25/35 litres tank capacity geyser and testing complete of make.Pearl, Ditz, Racold, Gilco, Sahas including taking down old unserviceableouter cover complete all as specified andas directed. |
101 | Stainless steel inner container (tank) of capacity 50 litres and testing complete of make. Pearl, Ditz, Racold, Gilco, Sahasincluding taking down old unserviceable tank complete all as specified andas directed. |
102 | Stainless steel outer container for50 litres tank capacity geyser and testing complete of make.Pearl, Ditz, Racold, Gilco, Sahas including taking down old unserviceableouter cover complete all as specified andas directed. |
103 | Non return valves cast copper alloy 15 mm dia ISImarkcomplete including taking down old existing NRVcomplete all as specified andas directed.. |
104 | Taking down old/unserviceable inlet outlet stainless steelchromium plated assembly ISI marked complete, brazing/ welding and refixing including testing of geyser 25/50litres capacity complete all as specified andas directed. |
105 | Taking down old/unserviceable assemblyofwater heaterof capacity 25/35 ltr&S&F new stainless steelchromium plated assembly ISI marked as per sample suitable forwater heater of capacity 25/35ltrs complete all as specified andas directed. |
106 | Taking down old/unserviceable assemblyofwater heaterof capacity 50 ltr&S&F new stainless steelchromium plated assembly as per sample suitable forwater heater of capacity 50ltrs complete all as specified andas directed. |
107 | Heating element 2 KW 230 volt,ISI marked, round /triangular typeas per sample for storage type electric water heaterincluding taking down existing unserviceable elementcomplete all as specified andas directed. |
108 | Heating element 2.0 KW 230 volt, ISI marked square/rectangular typeas per sample for storage type electric water heaterincluding taking down existing element complete all as directed. |
109 | Heating element 1.5 KW 230 volt, ISI marked square/rectangular typeas per sample for storage type electric water heaterincluding taking down existing element complete all as directed. |
110 | Heating element 3 KW, 230 volts ISI markded Round shape base with provn of Thermostate Racold Model PL-150,ISI Marked including taking down existing element complete all as specified andas directed. |
111 | Thermostat switch 220- 240 volt 16 Amp 0-75° /80° CISI marked as per sample suitable for round including taking down existing complete all as specified andas directed. |
112 | Thermostate switch 220- 240 volt 16 Amp 0-75° / 80° C ISI marked as per sample suitable for square/rectangular type of element including taking down existing complete all as specified andas directed. |
113 | Indicating lamp 230 volt AC for geyserfixed in repairof Green & Red colourcomplete all as specified andas directed.. |
114 | Heavy dutyPVCconnection with 15mm dia 450mm longCP with brass nuts and leads PVC washer 02 Nos on each endsfor geyser connection fixed in repair complete all as specified andas directed |
115 | Heavy dutyPVCconnection with 15mm dia 600mm longCP with brass nuts and leads PVC washer 02 Nos on each endsfor geyser connection fixed in repair complete all as specified andas directed. |
116 | Chromium Plated pipe connection with washer and bolt, size 15mm dia, 450mm long including taking down existing complete all as directed. |
117 | Chromium Plated pipe connection with washer and bolt, size 15mm dia, 600mm long including taking down existing complete all as specified andas directed. |
118 | Metal clad Industrial plug top ISI mark, 3 pin with earth, 230 to 250 Voltsincluding taking down existing complete all as specified andas directed. |
119 | PVC insulated copper cable size 3 core 70/.0076, AC 1100/660 volt including taking down existing unserviceable cable complete all as specified andas directed. |
120 | PVC insulated copper cable size 2 core 23/.0076, AC 1100/660 volt including taking down existing unserviceable cable complete all as specified andas directed. |
121 | Metallic fastener screw 75mm long 6mm dia with bolt for hanging Geyser complete all as directed. |
122 | Multifunction safety valve cast copper alloy 15 mm dia ISI marked complete including taking down existing valve complete all as specified andas directed. |
123 | 3 Pin plug top 15 amps complete ncluding taking down existing top complete all as specified andas directed. |
124 | Sheet metal enclosure, single pole and neutral withtwo pin and earth plug and socket with and including one single pole MCB 20. Amps, 240 volts,10 KAcomplete fixed in repair complete all as specified andas directed. |
125 | MCB SP6 to 40 Amps, 240 volts "C" Curve 10 KA, including connection with suitable size copper lugs complete fixed in repair complete all as specified andas directed. |
126 | MCB SPN 6 to 40 Amps, 240 volts "C" Curve 10 KA, including connection with suitable size copper lugs complete fixed in repair complete all as specified andas directed.. |
127 | MCB TPN63 Amps, 415 volts "C" Curve 10 KA, including connection with suitable size copper lugs complete fixed in repair complete all as specified andas directed. |
128 | MCB TPN100 Amps, 415 volts "C" Curve 10 KA, including connection with suitable size copper lugs complete fixed in repair complete all as specified andas directed. |
129 | Heating element 1.5 KW 230 volt,ISI marked, round /triangular typeas per sample for storage type electric water heaterincluding taking down existing unserviceable element complete all as directed. |
130 | Sub main wiringwith two single core PVC insulated unsheathed FR cable 1100 Volt grade, 10 Sqmm size with multi stranded copper conductor drawing into and including PVC conduit in surface/concealed as required including one run single core PVC insulated unsheathed 10Sqmm cable with multi stranded copper conductor colour code as a earth continuity and connected upto DBcomplete all as specified and directed. NOTE: (i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit. |
131 | Sub main wiringwith two single core PVC insulated unsheathed FR cable 1100 Volt grade, 6 Sqmm size with multi stranded copper conductor drawing into and including PVC conduit in surface/concealed as required in 6 Sqmm cable with multi stranded copper conductor colour code as a earth continuity and connected upto DBcomplete all as specified and directed. NOTE: (i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit. |
132 | Sub main wiringwith two single core PVC insulated unsheathed FR cable 1100 Volt grade, 4 Sqmm size with multi stranded copper conductor drawing into and including PVC conduit in surface/concealed as required including one run single core PVC insulated unsheathed 4Sqmm cable with multi stranded copper conductor colour code as a earth continuity and connected upto DBcomplete all as specified and directed.Make of wire : Finolex, Plaza, Havells, Polycab NOTE: (i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit. |
133 | Sub main wiringwith two single core PVC insulated unsheathed FR cable 1100 Volt grade, 2.5 Sqmm size with multi stranded copper conductor drawing into and including PVC conduit in surface/concealed as required including one run single core PVC insulated unsheathed 2.5Sqmm cable with multi stranded copper conductor colour code as a earth continuity and connected upto DBcomplete all as specified and directed. NOTE: (i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit. |
134 | Water heater (Geyser) storage type, electric,capacity 25 litres five star rated AC SP 230 volts, 50 Hz, vertical mount type, shockproof and rustproof metal body, stainless steel inner container, high efficiency heating element, autocut thermostate, pressure release safety system, fire retardent cable with 3 pin plug top, white colour including fixing accessories like fastensers, nuts, washers complete all as specified and directed. Make: Havells cat part No. GHWAMGTWH025or equivalent in Bajaj/Usha/Recold |
135 | Water heater (Geyser) storage type, electric,capacity 50 litres five star rated AC SP 230 volts, 50 Hz, vertical mount type, shockproof and rustproof metal body, stainless steel inner container, high efficiency heating element, autocut thermostate, pressure release safety system, fire retardent cable with 3 pin plug top, white colour including fixing accessories like fastensers, nuts, washers complete all as specified and directed. Make: Havells cat part No. GHWAMESWH050 or equivalent in Bajaj/Usha/Recold |
136 | Water heater (Geyser) storage type, electric,capacity 100 litres five star rated AC SP 230 volts, 50 Hz, vertical mount type, shockproof and rustproof metal body, stainless steel inner container, high efficiency heating element, autocut thermostate, pressure release safety system, fire retardent cable with 3 pin plug top, white colour including fixing accessories like PCC/Bricks foundation, bolts, nuts, washers and fastensers complete all as specified and directed. Make: Havells cat part No. GHWAMESWH100 or equivalent in Bajaj/Usha/Recold |
137 | Supply only top plug 15 amp, 240 volts, ISI marked. |
138 | Supply only top plug 5 amp, 240 volts, ISI marked. |
139 | Switch piano, flush type, single pole one way 15 Amp fixed in repair complete all as specified anddirected |
140 | Bib tap cast copper alloy with crutch or butter fly handle screwed down 15mm bore including taking down existing tap etc complete all as specified and directed. |
141 | Stop valve cast copper alloy chromium plated screwed down high pressure with crutch or butter fly handle 15mm bore including taking down existing tap etc complete all as specified and directed. |
142 | Circuit/submain wiring withsingle core FRLS PVC insulated copper stranded conductor cable drawing into existing PVC rigid conduitsurface /concealed/ casingcaping as required of following sizes, including taking down unserviceable existing wiring etc complete of following sizes as directed. |
143 | 1.50 Sqmm |
144 | 2.50 Sqmm. |
145 | 4 Sqmm. |
146 | 6 Sqmm. |
147 | Metal clad industrial plug top and porcelain socket 3 pin 20 Amps with earth pin 230 to 250 Volts including taking down existing complete all as specified and directed. |
148 | Supply and fix in repair Pressure release valve 15mm dia for 50 Ltr capacity geyser complete all as specified and directed. |
149 | Supply and fix in repair Rubber gasket for fall plate for 25Ltr capacity geyser complete all as specified and directed |
150 | Supply and fix in repair Rubber gasket for fall plate for 50 Ltr capacity geyser complete all as specified and directed. |
151 | PVC insulated copper cable size 3 core 2.5 sq mm, AC 1100/660 volt including taking down existing unserviceable cable complete all as specified and directed. |
152 | PVC insulated copper cable size 3 core 1.5 sq mm, AC 1100/660 volt including taking down existing unserviceable cable complete all as specified and directed. |
153 | Supply and fix in repair Glass wool for 25/50 Ltr capacity geyser complete all as specified and directed. |
154 | Supply and fix in repair Thermostat for 100/150 Ltrstank capacity geyser of existing pattern as required at site complete all as specified and directed. |
155 | Socket outlet, multipurpose 2 in 1 5 pin, 15 Amp fixed in repair complete all as specified and directed |
156 | Supply only REO Modular AC MCB box protected socket PVC pastic base 3-Model including 25 amps plug top and MCB 25 amp fixed in repair complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail