Local Self Government Department has published Varkala Block Panchayath , Providing Facilities In Manambur Chc For Covid Test . Varkala Block Panchayath , 2021-22 , Providing Facilities In Manambur Chc For Covid Test . . Submission Date for this Tender is 27-07-2021. Civil Work Tenders in CHERUNNIYOOR Kerala. Bidders can get complete Tender details and download the document.
| Work Name:Varkala Block Panchayath ,2021-22,Providing facilities in Manambur CHC for covid test. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | building | BI01010001010000000000000515BI0100001113 | ||
| 2 | 1.001 | 2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil | BI01010001010000000000000515BI0100001114 | 0.297 | cum |
| 3 | 1.002 | 4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001115 | 0.297 | cum |
| 4 | 1.003 | 10.16.1 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | BI01010001010000000000000515BI0100001116 | 800 | kg |
| 5 | 1.004 | 51.20 : Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of\ncorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated\nthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-\n7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.\nSheet should have protective guard film of 25 microns minimum to avoid scratches\nduring transportation and should be supplied in single length upto 12 metre or as desired\nby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of\nsize (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or\ncurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to\nsize and shape wherever required. | BI01010001010000000000000515BI0100001117 | 219.295 | sqm |
| 6 | 1.005 | 12.4.2 : Providing ridges or hips width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.0.63 mm thick with zinc coating not less than 275 gm/m2 | BI01010001010000000000000515BI0100001118 | 9.2 | metre |
| 7 | 1.006 | 11.36 : Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | BI01010001010000000000000515BI0100001119 | 52.8 | sqm |
| 8 | 1.007 | 4.1.4 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 )1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) | BI01010001010000000000000515BI0100001120 | 1.35 | cum |
| 9 | 1.008 | 21.1.1.2 : Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | BI01010001010000000000000515BI0100001121 | 50 | kg |
| 10 | 1.009 | 21.2.1 : Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side | BI01010001010000000000000515BI0100001122 | 36 | sqm |
| 11 | 1.01 | od1293286/2021_2022 : S/F name board of size 75*60 cm installaed in the appropriate place visible to public made of brick wall with granite plaque should be inserted and engraving letters etc. complete as per direction of Deptl. officers. | BI01010001010000000000000515BI0100001123 | 1 | each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
