| 1 | 1 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m. | BI01010001010000000000000515BI0100001113 | 36.46 | Cu-m |
|---|
| 2 | 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -All work upto plinth level 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). | BI01010001010000000000000515BI0100001114 | 2.4 | Cu-m |
|---|
| 3 | 3 | Random rubble masonry with hard stone in foundation and plinth including levellingup with cement concrete 1:6:12 (1 cement: 6 coarse sand : 12 graded stone aggregate 20mm nominal size) at plinth level with Cement mortar 1:6 (1 cement : 6 coarse sand) | BI01010001010000000000000515BI0100001115 | 18.22 | Cu-m |
|---|
| 4 | 4 | Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) | BI01010001010000000000000515BI0100001116 | 6.43 | Cu-m |
|---|
| 5 | 5 | Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) | BI01010001010000000000000515BI0100001117 | 12.7 | Cu-m |
|---|
| 6 | 6 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) | BI01010001010000000000000515BI0100001118 | 153.97 | Sq-m |
|---|
| 7 | 7 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate\n20 mm nominal size) | BI01010001010000000000000515BI0100001119 | 1.89 | Cu-m |
|---|
| 8 | 8 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size). 5.3 | BI01010001010000000000000515BI0100001120 | 1.86 | Cu-m |
|---|
| 9 | 9 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Mild steel and Medium Tensile steel bars. | BI01010001010000000000000515BI0100001121 | 753.06 | Kg. |
|---|
| 10 | 10 | Centring and shuttering including strutting,ropping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers. | BI01010001010000000000000515BI0100001122 | 24.38 | Sq-m |
|---|
| 11 | 11 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer Using flats 30x6mm for diagonal braces and central cross piece | BI01010001010000000000000515BI0100001123 | 39.38 | Sq-m |
|---|
| 12 | 12 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture | BI01010001010000000000000515BI0100001124 | 92.25 | Sq-m |
|---|
| 13 | 13 | 12 mm cement plaster of mix 1:6 (1 cement : 6 fine sand) | BI01010001010000000000000515BI0100001125 | 438.92 | Sq-m |
|---|
| 14 | 14 | White washing with lime to give an even shade : New work (three or more coats) | BI01010001010000000000000515BI0100001126 | 438.92 | Sq-m |
|---|
| 15 | 15 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate | BI01010001010000000000000515BI0100001127 | 23.62 | Sq-m |
|---|
| 16 | 16 | Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement. 18 mm thick | BI01010001010000000000000515BI0100001128 | 82.12 | Sq-m |
|---|
| 17 | 17 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6graded stone aggregate 20mm nominal size) over 75mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth | BI01010001010000000000000515BI0100001129 | 18.45 | Sq-m |
|---|
| 18 | 18 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | BI01010001010000000000000515BI0100001130 | 347.4 | Kg. |
|---|
| 19 | 19 | Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level whiteP.V.C. flushing cistern, including flush pipe, with manually controlleddevice (handle lever) conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls andfloors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | BI01010001010000000000000515BI0100001131 | 25 | each |
|---|
| 20 | 20 | White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P.brass pillar tap | BI01010001010000000000000515BI0100001132 | 25 | each |
|---|
| 21 | 21 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. internal work - Exposed on wall. 15 mm dia. nominal bore. | BI01010001010000000000000515BI0100001133 | 250 | Rm |
|---|
| 22 | 22 | Providing and fixing PTMT stop cock of approved quality and colour. 15 mm nominal bore, 86mm long, weighing not less than 88 grams. | BI01010001010000000000000515BI0100001134 | 50 | each |
|---|
| 23 | 23 | Providing and fixing PTMT bib cock of approved quality and colour. 15mm nominal bore, 90mm long, weighing not less than 93 grams. | BI01010001010000000000000515BI0100001135 | 50 | each |
|---|
| 24 | 24 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank | | 2500 | litre |
|---|
| 25 | 25 | Constructing masonry Chamber 30x30x50 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) necessary excavation foundation concrete 1:5:10 ( 1 cement :5 fine sand:10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement :3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design : With F.P.S. bricks ( 18.32.1) | | 25 | each |
|---|
| 26 | 26 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter. | | 70 | mtr |
|---|
| 27 | 27 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | | 25 | each |
|---|
| 28 | 28 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes | | 1151.87 | Kg. |
|---|
| 29 | 29 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required | BI01010001010000000000000515BI0100001138 | 99.74 | Sq-m |
|---|
