Tender For Construction Of Rooms Alongwith Purchase And Establishment Branch Tender For Construction Of Rooms Alongwith Purchase And Establishment Branch
Tender Value
Ref. Documents
Estimated cost
Bid Submission
26 Jul 2021
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
100
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Work → Haryana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Construction Of Rooms Alongwith Purchase And Establishment Branch Tender For Construction Of Rooms Alongwith Purchase And Establishment Branch
BOQ
| Sl. No. | Item Description |
| 1 | Work construction of Rooms |
| 2 | Earth work in excavation in foundations, trenches, etc. in all kinds ofsoils, not exceeding 2 metres depth including dressing of bottom andsides of trenches, stacking the excavated soil, clear from the edge ofexcavation and subsequent filling around masonry, in 15 cm layers with compaction, including disposal of all surplus soil, as directed within a lead of 30 metres.(HSR 6.6) |
| 3 | Cement concrete 1 : 4 : 8 with stone aggregate 40 mmNominal size in foundation and plinth.(HSR10.39) |
| 4 | First class brick work laid in cement sand mortar 1:6 in foundation and plinth.(HSR 11.2) |
| 5 | Damp proof course 40 mm thick of cement concrete 1:2:4 using stone aggregate 20 mm nominal size with 2 coats of bitumen 20/30 penetration, at 1.65 kg per sqm laid hot and sanded.(HSR10.114) |
| 6 | 11.43 cm thick brick wall laid in cement(HSR11.48) |
| 7 | First class brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level.(HSR 11.7) |
| 8 | Cement concrete 1:1.5:3 with stone aggregate20 mm nominal size for reinforced concrete work in slabs with inclination not exceeding 25 degree with horizontal, excluding steel reinforcement, but including centering and shuttering , laid in position, complete in allrespects.(HSR10.82+10.95a) |
| 9 | Cement concrete 1:1.5:3 with stone aggregate 20 mm nominal size for reinforced concrete work for walls exceeding 20 cm thickness (straight and curved) beams, girders, stairs, columns, (square or rectangular) battens and lintels etc. excluding steel reinforcement but including centering and shuttering, laid in position, complete in allrespects.(10.86+10.95) |
| 10 | 15 mm thick cement plaster 1:6 on the rough side of single of half brick wall (HSR 15.12) |
| 11 | 12mm thick cement plaster 1:6 on the brick wall (HSR 15.7) |
| 12 | 10 mm thick cement plaster 1:4 (HSR 15.52) |
| 13 | Base course of floors consisting of 100 mm thick cement concrete 1:8:16 and 100 mm sand or stone filling.(HSR14.1) |
| 14 | Flooring conglomerate floor 40mm thick cement conc. Topping 1:2:4.(HSR 14.09) |
| 15 | Terracing consisting of tiles 22.86 cm X 11.43 Cm X 3.81 cm laid over 87.50 mm mud filling on a layer of 25 mm mud plaster and on other layer of mud mortar for laying the tiles,including two coats of bitumen laid hot at 1.65 kg per sqm on top of R.C.C slab including grouting with cement sand mortar 1:3 and top surface to be left clean etc.(HSR 13.13) |
| 16 | Cement concrete 1:2:4 gola 10 cm X 10 cm quardrantalong junction of roof with parapet wall finished smooth, where specially specified.(HSR 13.64) |
| 17 | Top khurra 0.6 m X 0.6 m for rain water pipe in 25 mm thick cement concrete 1:2:4 over 50 mm thick cement concrete 1:8:16.(HSR 13.50) |
| 18 | Providing & fixing PVC Rain Water pipe 6 kg, pressure of ISI mark in cement mortar during masonry work. (HSR 13.89) |
| 19 | Providing & fixing 100 mm dia PVC Bend ISI Mark (HSR 13.90) |
| 20 | Distempering with washable oil bound distemper (of approved manufacture two coats excluding priming coat . HSR 16.57 |
| 21 | Finishing walls with exterior decorative cement based paints such as snowcem,Robbiacem etc. on new work, two coats to give an even shade.(HSR 16.61) |
| 22 | Fe 500 EQR steel bars for R.C.C. works, where not included in the complete rate of R.C.C including bending, binding and placing in position complete. (HSR 18.22) |
| 23 | Dismantling Brick Work, Tile Masonry or Tile Lining and Tile Terracing (in cement) (HSR 8.5 b) |
| 24 | Factory manufactured paneled and glazed door shutters of commercial hard wood, such as hollock, champ, chikrassy and chaplash, etc. ( non-coniferous timber other than teak, conforming to I.S specification No. 1003, kiln-seasoned) with 100 mm wide vertical styles, 150 mm wide lock rail, 200 mm wide bottomrail and 100 mm wide other rails, with panels of 12 mm thick, commercial veneered both side particle board or plywood of B.W.R. grade, hot pressed including cost of iron hinges, screws, chock/cleats, stops and nails etc. complete fixedin position .35 mm thickHSR 17.91 |
| 25 | Factory manufactured solid flush door shutter with block board core as per I.S No. 1659-1969 bonded with water proof type phenol formaldehyde synthetic resin, hot pressed, conforming to I.S part 1 and screw, chocks/cleats and stop etc.35 mm thickHSR 17.93 |
| 26 | Pressed steel frames (Chowkats) consisting of 2 mm thick steel sheet of the specified section, including iron lugs (hold fasts) iron hinges, conforming to P.W.D specification, including bolts for fixing stops, locknotch, provision for receiving tower bolts, and finished with one coat of ready mixed paint red lead non-setting primer, of approved quality, fixed in position including the cost of cement concrete 1:3:6 forlugs complete. Door and window frame size 127 mmx150 mm wide double rebate. HSR 18.34 |
| 27 | Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade. HSR 16.3 |
| 28 | Preparation of ply wood surface for painting including sand papering the surface and applying filling with approved quality filler consisting of white lead, linseed oil, varnish and chalk mitti includingfinishing the surface of required finish complete.HSR 16.1 |
| 29 | Applying pink primer or aluminum priming coat on wood work including preparation of surface, knotting andstopping etc. HSR 16.2 |
AI Tender Summary
Tender Timeline
Jul 15, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedJul 26, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 26, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender