Special Repair To Paraclinic Block Building In Dr. R.P. Govt. Medical College At Tanda In Distt Kangra ( Hp ) Dismantling Of Tiles Floors, Providing And Fixing Floor Tiles, Plastering, Painting, Providing Ws And Si Work Etc In Microbiology Practical
Tender Value
23.76 Lakhs
Estimated cost
Bid Submission
28 Jul 2021
0 days left
EMD
43150
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tanda → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Special Repair To Paraclinic Block Building In Dr. R.P. Govt. Medical College At Tanda In Distt Kangra ( Hp ) Dismantling Of Tiles Floors, Providing And Fixing Floor Tiles, Plastering, Painting, Providing Ws And Si Work Etc In Microbiology Practical Lab ( 719-A )
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work above G.L. upto any floor level including stacking of serviceable materials and disposal of un-serviceable materials upto any leads in cement mortar complete aas directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals. |
| 2 | Dismantling tiled floors laid in mortar upto floor two level including stacking of serviceable materials and disposal of un-serviceable materials within 20m (Twenty meters) lead (wooden/concrete joists to be measured and paid for separately) for thickness of tiles above 25mm (Twenty five millimeters) and upto 40mm (Forty millimeters) as per directed by the Engineer-in-Charge, including entire carriage of materials within all leads, lifts and other incidentals. |
| 3 | Dismantling wooden trellis work in position including frame work and stacking the serviceable materials with upto any lead complete including entire carriage of materials within all leads lifts and other incidentals and as directed by the Engineer-in-Charge. |
| 4 | Second class brick masonry using common burnt clay building bricks in super-structure upto any floor level in cement mortar 1:6 (One cement: Six sand)including carriage of material as per directed by the Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals. |
| 5 | Providing second class half brick masonry in common burnt clay building bricks in cement mortar 1:3 (One cement : Three sand) , as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals. |
| 6 | Providing and laying cement concrete work 1:2:4 (One Cement : Two Sand : Fopur graded stone aggregate 20 mm (Twenty millimetres) nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in suspended floors, roofs, landings, shelves their supports balconies, beams, girder, bressumers and cantilevers, including carriage of materials within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. |
| 7 | Providing Tor steel reinforcement for reinforced cement concrete work including bending, binding and placing in position complete including cost of binding wires complete and other incidentals due for its completion for all floors,including carriage of material as per directed by the Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals. |
| 8 | Providing form work with steel plates of 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimeters), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors roofs, landings windows sills, cornices, arches, moulding, corbelling including curved surfaces where ever required as per Architectural drawing, design and specifications and the like floor etcetera including carriage of materials within all leads, lifts and other incidentals and as directed by the Engineer-Incharge. |
| 9 | 15mm (Fifteen milimetres) thick cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto all floor levels including arises internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth with cement mortar 1:6 (One cement: Six sand) including entire carriage of materials within all leads, lifts and other incidentals |
| 10 | Providing and fixing 10mm thick anti skid water proof stain and impect resistent heavy duty vetrified tiles Kazaria or its equivalant 300x300mm (Three hundred into Three hundred millimetres) manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm (Twelve millimetres) thick cement mortar 1:3 (One cement : Three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete, as directed by the Engineer-Incharge, including carriage of materials within all leads, lifts and other incidentals. |
| 11 | Providing and laying matt finished vetrified tiles 605x605x8mm (Six hundred five into Six hundred five into eight millimeters)thick in grey/coloured or of approved shade in skirting, treads of steps and landing laid on a bed of 12mm (Twelve millimeters) thick cement mortar 1:3 (One cement :three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete.including entire carriage of materials within all leads, lifts and other incidentals |
| 12 | Providing and laying 16mm to 20mm (Sixteen milliemetres to Twenty millimeters) thick granite stone in flooring 20mm (Twenty millimeters) (average) thickness base of cement mortar 1:3 (One cement : Three sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete as per approved drawing, design and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. |
| 13 | Providing and fixing anodised aluminium work for door, windows, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading forglazinge/ panelling C.P. brass/stainless steel screws for doors windows and ventilatiors and glazed partitions frames. All complete as per architectural drawings and as directed by the Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals |
| 14 | Providing and fixing anodised aluminium work for door, windows, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading forglazinge/ panelling C.P. brass/stainless steel screws for shutters of doors windows & ventilators including providing and fixing hinges/pivots and making provisions for fixing of fittings where ever required including the cost of PVC/neoprene gaskets as required (fittings and glazing/panelling shall be paid for separately) all complete as per architectural drawings and as directed by the Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals |
| 15 | Providing and fixing 300x16 mm (Three hundered into Sixteen millimetres) nominal sizealuminum oxidizedof IS make sliding door bolts anodized transparent or dyed to required colour and shade with necessary screws etc. including entire carriage of materials within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. |
| 16 | Providing and fixing 200x10mm (Two hundredinto Ten milimetres) size aluminium Tower bolts (Barrel type) anodized transparent or dyed to required colour and shade with necessary screws etc; as directed by the Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals |
| 17 | Providing and fixing 150x10mm (One hundred fifty into Ten milimetres) nominal size aluminium Tower bolts (Barrel type) anodized transparent or dyed to required colour and shade with necessary screws etc;including entire carriage of materialsas per directed by the Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals. |
| 18 | Providing and fixing 125mm (One hundred twenty five milimetres) nominal size aluminium tower bolts (berrel type) anodized trans parent or dyed to required shade and colour with screws etc. complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals. |
| 19 | Providing and fixing 100x58x1.90 mm M.S. pressed butt hinges bright finished with necessary screws etc. complete as directed by the Engineer-in-Charge, including entire carriage of materials within all leads, lifts and other incidentals |
| 20 | Providing and fixing 12mm (Twelve millimetres) thick prelaminated board both side bwp phenol bonded exterior/interior grade panelled shutters including bright finished/black enamelled iron butt hinges with necessary screws complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals. |
| 21 | Supplying and fixing 3.50mm to 4mm (Three point five zero millimetres to Four millimetres) thick Plain Glass panes with putty and nails including removal of broken glass panes wherever necessary complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals. |
| 22 | Supplying and fixing expended metal to wood or steel members in partitions etc. weight exceeding 3kg (Three kilograms) and not exceeding 5kg (Five kilograms) per Sqm. complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals. |
| 23 | Steel work welded in built up sections,trusses and framed work, including cutting, hoisting ,fixing in position and applying a priming coat of red lead paint in beams joists channels, angles, tee ,flats with connecting plates or angle cleats as in main and cross beams,hip and jack rafters,purlins connected to common rafters and the like complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals. |
| 24 | Welding of steel window shutters when required complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals. |
| 25 | Removing dry or oil bound distemper by washing and scraping and sand papering the wall surface smooth including necessary repairs to scratches complete, as directed by the Engineer-Incharge, including carriage of materials within all leads, lifts and other incidentals |
| 26 | Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface as directed by the Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals |
| 27 | Wall painting(Two coats) with plastic emulsion paint of approved brand and manufacture on decorated wall surface to give an even shade including thoroughly brushing the surface clean of all dirt grease,loose pieces of scale and sand papered smooth including applying of putty as required for making the surface complete as per HPPWD technical specifications and as directed by the Engineer-Incharge, including carriage of materials within all leads, lifts and other incidentals |
| 28 | Extra over items 7 for every sub sequent coat of wall paint of approved brand and manufacture as per HPPWD technical specifications and as directed by the Engineer-Incharge, including carriage of materials within all leads, lifts and other incidentals |
| 29 | Providing and fixing to wall ceiling and floor galvanised mild steel tubes (heavy grade) tube fitting and clamps including making good the wall, ceiling and floor including entire carriage of materials within all leads lifts and other incidentals. |
| 30 | 15mm (Fifteen milimetres)nominal bore |
| 31 | 20mm (Twenty milimetres)nominal bore |
| 32 | Providing and fixing 32mm (Thirty two milimetres) diametres M.I. Union for wash basin or sink complete as directed by the Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals. |
| 33 | Providing and fixing 32mm (Thirty two milimetres) diametresPVC waste for wash basin or sinkcomplete as directed by the Engineer- in-Charge including carriage of materials within all leads, lifts and other incidentals. |
| 34 | Providing and fixing 100mm (One hundred milimetres) diametres C.P brass grating for gully floor or Nahni trap ISI make complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals. |
| 35 | Providing and fixing PVC spigot and socketpipes Type-B for soil waste and ventilating pipe, including fixing with approved adhesive etc. complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals. |
| 36 | 110mm (One hundred ten milimetres) diametres |
| 37 | 90mm (Ninety milimetres) diametres |
| 38 | 50mm (Fifty milimetres) diametres |
| 39 | Providing and fixing 600x450x150mm (Six hundred into Four hundred fifty into One hundred fifty millimetres) vitreous china laboratory sink Cera, Jaquuar and Hindware with C.I. or M.S. brackets painted white including cutting holes in walls and making good the same but excluding fittings complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals. |
| 40 | Providing and fixing three way Laboratory metal cock of stainless steel including fitting accessories complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals. |
AI Tender Summary
Tender Timeline
Jul 15, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedJul 28, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 29, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender