Restoration Of Considerable Pot Holes By Way Of P/L Of 50Mm Thick Bituminous Macadam And 25Mm Thick Semidense With 6Mm Thick Seal Coat In Patces / Stretches On Panzgam Asthanpora Railway Station Incl . Panzgam Grave Gund Road And Kawni Link ( Bw ) . , Panzgam-Jammu And Kashmir
TDR : 28519303
Tender Notice
BOQ
Expired
Panzgam
Jammu And Kashmir
Restoration Of Considerable Pot Holes By Way Of P/L Of 50Mm Thick Bituminous Macadam And 25Mm Thick Semidense With 6Mm Thick Seal Coat In Patces / Stretches On Panzgam Asthanpora Railway Station Incl . Panzgam Grave Gund Road And Kawni Link ( Bw ) .
Name of Work: Restoration of considerable Pot holes by way of P/L of 50mm thick Bituminous Macadam and 25mm thick semidense with 6mm thick seal coat in Patces / Stretches on Panzgam Asthanpora Railway station incl. Panzgam Grave gund road and kawni link (BW). (to laid mechanically).
Sl.No.
Item Description
Item Code / Make
Quantity
Units
1
1
Providing, laying, spreading and compacting graded stone spacified grading to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site for all leads and lifts laying in uniform layers with mechanical paver finisher sub-base/base course and well prepared surface and compacting with vibratory roller of 8-10 tonne capacity to achieve the desired density (clause 406 of MORTH Specifications)
98.55
Cum
2
2
Providing and applying tack coat using hot straight run bitumen of grade VG-10 including heating the bitumen with spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road the existing road surface to remove all dirt dust, mud etc finally bromming. (Clause 503 of MoRTH Specification).WBM surface @ 0.75 Kg/Sqm
1569.5
sqm
3
3
Providing and laying bituminous macadam 50 mm compacted thick with 100-120 TPH Hot Mix Plant producing an averrage output of 75 tonnes per hour base course with stone agg.of quality size and grading as specified in CPWD specifications and straight run bitumen of grade VG-10 @ 3.3% by weight of total mix including Hot mixing of stone agg. and bitumen in Hot mix plant, transporting mixed material and laying mixed with paver finisher to the required level and grade, rolling with road roller of 8-10 ton capacity to achieve the required compaction and density as per cluse 501.6 and 501.7 (50mm compacted thickness complete) including cost and carriage of all materials involved. (Clause 504 of MORTH Specifications)
78.47
Cum
4
4
Providing, laying 25mm thick (compacted) semidense bituminous concrete using mineral agg. satisfying the gradation set out in specifications with 5% binder content (by weight of total mix) bitumen of grade VG-10 with the aid of Hot mix plant and paver finisher including rolling with 8-10 Ton capacity to achieve the required compaction and density including cost and carriage of all materials involved.(Clause 508 of MoRTH Specification)
1569.5
sqm
5
5
Providing and laying 6mm thick seal coat of premixed fine aggregate (Passing 2.36mm and retained on 180 micron sieve) with bitumen using 128 Kgs of bitumen of grade VG-10 bitumen per cum of fine aggregate (0.768 Kg of bitumen/Sqm) and 0.60 cum of fine aggregate per 100 sqm of road surface incl. rolling and finishing complete including cost and carriage of all materials involved.(Clause 513 of MoRTH Specification)
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
