Housing Urban and Rular Development Government Departments Closing in 0 days TDR #28514918

Construction Of Science Lab Building At Govt. Senior Secondary School Kanaid Tehsil Sundernagar, Distt Mandi ( Hp ) ( Sh-C / O Building Portion And W.S. And S.I ) .

Issued by Government Departments · Gohar, Himachal Pradesh
Tender Value
1.01 Crore
Estimated cost
Bid Submission
22 Jul 2021
0 days left
EMD
2.02 Lakhs
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Gohar → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Construction Of Science Lab Building At Govt. Senior Secondary School Kanaid Tehsil Sundernagar, Distt Mandi ( Hp ) ( Sh-C / O Building Portion And W.S. And S.I ) .

BOQ

Name of Work: Construction of Science Lab Building at Govt. Sen. Sec. School KanaidTehsil Sundernagar, Distt. Mandi (HP) (SH:- Construction of building portion withW.S. & S.I.)
Sl. No. Item Description
1Excavationinfoundations,trenches etc. in earthworkinall kindsofsoils suchas pickwork,jumperwork,blastingworkand chiselling / wedging out of hard or soft rock uptoall heights stackingtheexcavatedsoilnotmore than 3 (Three) meteresclearfrom theedge ofexcavationandthanreturningthe stacked soilin15 cms(fifteen centimeter) layers,whenrequiredintoplinths, sidesoffoundations etc.consolidating each deposited layer by ramming and wateringand then disposing of all surplus excavated earth including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
2Excavation in earth work and disposal of all excavated/earth upto a lead of 20 (Twenty)Meters and lift upto 1.50 (one point five zero)Meters, disposed earth to be levelled and neatly dressed, pick work. including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
3Filling in plinth withsand underfloorsincluding watering,ramming,consolidating anddressing including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
4Providing formwork with steel plates 3.15mm (three point one five milimeter) thick welded with angle iron frames 30x30x5mm (thirty in to thirty in to five milimeter) so as to give a fair finish includingcentering, shuttering, strutting andpropping, etc. with wooden battens and ballies heights ofpropping andcentering below supportingfloor toceilingin allheightsandremovalof thesame forin-situ reinforcedconcreteandplainconcreteworkincluding carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
5Foundation footings, bases of columns and the like and mass concrete.
6Flat surfaces such as soffits of suspended floors, roofs, landings and the like: Floors, etc. upto any thickness.
7Columns pillars, posts, and struts square, rectuangular or polygonal in plan
8Staircases with slopping or stepped soffits including risersand stringers excluding landing.
9Beams, cantilevers, girders and lintels.sides and soffits ofbeams,beam haunchingcantilivers,girders,bressumers andlintels upto any in depth. & upto all heights from floor.
10Edges of slab and breaks in floors and walls under 20cm (twenty centimetre) wide.
11Providing and laying cement concrete 1:4:8 (one cement: four Sand:8graded stone agregate 40mm (forty nilimeter) nominal size) and curing complete excluding cost of form work in foundation and plinth.including carriage of material in all leads and lifts and other incidentialscuring complete and as per the entire satisfaction and direction of Engineer-in-Charge.
12Providing and laying cement concrete 1:6:12(one cement: six sand: twelve graded stone aggregate 40mm (forty milimeter) nominal size) in Foundatio & Plinth ncluding carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
13Providing and laying reinforced cement concrete design mix M-25 (Twenty five) grade mechanically mixed and vibrated and curing complete excluding cost of form work and reinforcement for reinforced cement concrete work. The mix shall be designed as per requirement of I.S. code and P.W. D specification. The design mix will be got approved from the Engineer-in-Charge prior to the casting . The theoreticalconsumption of cement for the item shall be out as per approved design mix as per I.S code.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
14Foundation ,footings,basis of columns and mass concrete.
15Suspended floor, roofs, landings, shelves and their supports, balconies,cantilevers Slabsin Beams,Girders, bressumers and cantilevers,beams in all floor height.
16Stair cases (except spiral stair cases) excluding landing but including preparing the surface and finishing of nosingupto all floors level including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
17Providing and laying reinforced cement concrete design mix M-20 (Twenty ) grade mechanically mixed and vibrated and curing complete excluding cost of form work and reinforcement for reinforced cement concrete work. The mix shall be designed as per requirement of I.S. code and P.W. D specification. The design mix will be got approved from the Engineer-in-Charge prior to the casting . The theoreticalconsumption of cement for the item shall be out as per approved design mix as per I.S code in string courses, copings, bed plates, anchor blocks, plain window sills and the likesuincluding carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
18Coloumns pillarspost and struts upto floorfloor all level
19Providing Tor steel /TMT Steel reinforcement for R.C.C. workincludingbending, binding and placing in position completeincludingcostofbindingwireuptoallheights including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
20Brick work using Second class common burnt clay building bricks infoundation and plinth in cementmortar 1:6 (one cement : six sand) including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
21Brick work using Ist class common burnt clay building bricks rat trap masonaryinuperstructurea bove plinth level upto all floor level in cementmortar 1:6 (one cement : six sand)including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.upto all floorlevel.
22Half brick masonry using Second class commonburnt claybuildingbricks in superstructure above plinth level upto all floor level in cement mortar 1:4 (one cement: four sand) including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. upto all floor level
23Providing & fixing of Door Frames with single rebate made with 75x40x5 mm (seventy five into forty into five milimeter)and 35x10 mm (thirty five into ten milimeter) MS flat cutting & welding in the shape as the designing of the Door Frames provided by the Site In Charge and fixed in theposition MS Channel 75x40x5 mm (seventy five into forty into five milimeter)including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
24Providing& fixing of Window Frames with Double rebate made with 125x50x5 mm(one hundred twenty five into fifty into five milimeter) and 45x10 mm (forty five into ten milimeter) MS flat cutting & welding in the shape as the designing of the Door Frames provided by the Site In Charge and fixed in thepositionMS Channel 125x50x5 mm (forty five into ten milimeter) including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
25Providing and fixing flush door shutters interior grade, commercial type, core of black-board construction with frame of first class hard wood and well matched commercial ply veneering withvertical grains of cross bands and face veneers on both faces of shutters. 35 mm (thirty five) thick including blackenamelled M.S. butt hinges. including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
26Providing and fixing 40mm (forty milimeter) thick Second class Deodarwood panelled, glazed or panelled and glazed shutters for doors, windowsandclearstoreywindows including bright finished/black enamelled ironbutthingeswithnecessary screws including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
27Supplying and fixing plain glass 5.5mm (five point five milimeter) thick with putty, glazing clips/glazing pins & I/c chamfered edged beading 20x12mm (twenty into twelve milimeter) size of 2nd class deodar woodetc. including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
28Providing and fixing wire guage shutters using galvanised MS wire guage of IS guage designation 85 G. with wire of dia 0.56mm (zero point fifty six) for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws40mm (forty milimeter) thick 1st class deodar wood.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
29Providing and fixing 40x3 mm (forty into three milimeter) flat iron hold fast 40cm long including fixing to frame with 10mm(ten milimeter) dia Meters bolts , nuts and wooden plug and embeding incement concrete block 30x10x15 cm (thirty into ten into fifteen centimeter) 1:3:6(one cement : three sand : six graded stone aggregate 20mm (twenty milimeter) nominal size ) including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge..
30Providing and fixingAluminium anodizedbrasssliding door bolts anodized to required of material in all leads and lifts. colour and shadewith bolts andnuts, screws etc.300 x 16mm. (three hundred sixteen milimeter) including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
31Providing and fixing Aluminiumtower bolts( berrel type) anodized transparent or dyedto requiredshade and colour with screws etc. including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
32250x10mm ( two hundred fifty into ten milimeter)
33150X10mm. ( one hundred fifty into ten milimeter)
34Providing and fixing Aluminiumhandles anodized transparent ordyed to required colour or shade with necessary screws including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
35125mm ( one hundred twenty five milimeter)
36100 mm ( one hundredmilimeter)
37Providing and fixing 100mm (one hundred milimeter) bright finished brass floor door stopper with rubber cusion screws etc. to suit shutter thickness completeincluding carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
38Providing and fixing bright finished hand drawn hooks and eyes (a) 150 mm (one hundred fifty milimeter)completeincluding carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
39Providing and fixingBrassHydraulic doors springincluding carriage of material in all leads and lifts . completeincluding carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
40Providing and fixinggrills of required pattern in wooden /steel /pressed steel chowkhats of window etc.with M.S.flats,square or round bars with round headed bolts and nuts or screws or by welding complete of any design plain grills including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
4112 mm (twelev milimetere)Thick Green Chalk Board ( Non- Magnetic) with superior Quality Framing Specialy Anodised Aluminium Profile 20x15 mm(twenty into fifteen milimetre) with corners of black surfaces shall be Non Porous ceramic partical on the top on the Green Surface for the writing with Chalk over 11 mm (eleven milimetre) thick particale board which shall have backing material of Galvanised sheet 0.28 mm(zero point two eight) apprx.the board shall be fixed on the wall with J clamps including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
42Providing and fixing 6 mm (six milimetre) thick Fiber Cement Board tiles 600mmx600mm (six hundred into six hundred milimetre) size fixed exposed in the T gridas per reqired pattern in ceiling including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
43Providing and fixing 600x600x4 mm (six hundred into six hundred into four milimetre) thick E- Board pannel ceiling as per reqired pattern in ceiling and as perthe direction of Engineer in charge excluding the cost of frame work including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
44Providing 19 mm (nineteen milimetre ) Boiling proof hard wood board the cabinets below the Working counter top of the Labs and dark rooms shall be painted from both side after applying the Priming and anti- termite coat on the board including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
45Providing and fixing 75mm x60mm (seventy five into sixty milimetre)moulded hand rails in straight length complete 1st class indian teak wood including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
46Precast terrazzo tiles hydraulic compressed 20 mm (twenty milimeter) thick with marble chips of specified sizes laid in floors, treads of steps and landings on a bed of 25 mm (twenty five milimeter) average thickness of cement mortar 1:6 (one cement :six sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles(wherever required) incliding rubbing and polishing complete with tiles of 75% (seventy five persent) in White& 25 % (twenty five persent)in Grey marble Chips inWhite, Green & Yellow with B & 2B size 50% (fifty persent)each. including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
47White
48Grey
49Providing and laying 300x300x10 mm (three hundred into three hundred into ten milimetre) tiles ofAnti- Skid and stain, alkali resistant tiles manufactured of floor tilescement mortar 1:3 (one cement :tree sand) jointed with cement slurry mixed with pigment tomatch the shade of tiles as required including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
50Kota stone slab 20 mm (twenty milimetre ) thick in risers of steps,skirting dado and in floorsshall be laid on 12 mm(tweleve milimtre) (average)thick cement mortar 1:4 (onecement: four sand) and jointed with greycement slurry mixed with pigment tomatch the shade of the slabs including rubbing and polishing completed any thickness including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
51Kota stone slab 25 mm (twenty five milimtre)thick in risers of steps,skirting dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (one cement : three sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
52Providing and fixing 20 mm (twenty milimtre)thick asid proof tile of sixe 300x300 mm ( three hundred into three hundred milimtre)of specified shade manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm (tweleve milimtre )thick cement mortar 1:3 (onecement :three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
53Providing and laying spartic ceremic tiles 5.5 mm (five point five milimtre ) .thick in flooring(300 x300mm. size (three hundred into three hundred milimetre )treads of steps laid on a bed of 12mm. (twelve milimetre)thick cement mortar 1:3(one cement: three sand) finished with flush pointing in white cement. including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
54Providing and laying granite stone in flooring 20mm (twenty milimter ) (average)thickness base of cement mortar 1:3(one cement: three sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete. 20mm (twenty milimetre ) thick including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
55Providing and fixing glazed tiles 6 mm (six milimeter ) thick (any size and any colour i/c cutting the tileswhere ever required) in skirting riser of steps and dado 12mm (twelve milimter) thick cement mortar 1:3 (one cement : threesand) and jointed with white cement slurry including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
56Providing and fixing on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqm including filling the joints with approvedadhesive complete 150mm (one hundred fifty milimter) dia pipes including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
57Providing and fixing MS holder bat clamps of approved design to CI or SCI pipes embeded in and including cement concrete blocks 10x10x10 cms of 1:2:4 mix(one cement: two sand: four graded stone aggregate 20 mm (twenty milimter) nominal size) and cost of cutting holes and making good the walls etc. 100 mm (one hundered )diameter for CI pipe including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
58Providing and fixing on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
59PVC Plain bend 150mm (one hundred fifty milimter)dia
60PVC shoe 150mm(one hundred fifty milimter)dia
61Providing and fixing 0.60mm (zero point six zero milimeter)thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 (twenty )microns over 5 (five)microns primer coating to back coat of polyster of 5 (five) microns over 5 (five) microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six milimter)dia Meter with prepainted limpet and rubber washers complete with all accesoriees as required including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
62Providing and fixing ridges or hips 60cm (sixty centimeter) overall with 0.60 mm (zero point six zero milimeter)thickprepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 (twenty )microns over 5(five) microns primer coating + back coat of polyster of 5 (five)microns over 5 (five)microns primer coating i/c fixing with prepainted iron J or L hooks, bolts &and bitumen washers complete with all accessories as required including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
636 mm (six milimeter)thickeverest board flase ceiling (595X595 mm ) case cade in power coated GI frame work as per detailincluding carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
64Steel work welded in built up sections, trusses and framed work, including cutting,hoisting, fixing in position and applying a priming coat of red lead paint includingcarriage of material in all leads and lifts: common rafters and the like. including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
65In beams, joists, channels angles, tees, flats with connecting plates or anglecleats in mainandcrossbeams, hip and jack rafters, purlinsconnection.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
66In gratings, framed guards, bars, ladders, railings, brackets and similar works including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
676 mm (six milimeter ) cementplaster twoceilingincementmortar 1 : 3 (onecement : threesand) including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
6815 mm(fifteen milimeter) cement plaster in single coat on fair side of brick/concrete/stone walls for interiorplasteringuptoallheightsincludingarises, Internalrounded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even andsmoothincementmortar 1:5 ( one cement : five sand)including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
6915 mm (fifteen milimeter)cement plaster insinglecoat onrough side of brick / stone masonry forinteriorplasteringuptoallheightsincluding arises,nternalroundedangles,champhers and / or rounded anglesnotexceeding 80 mm ingirthsand finished even and smoothin cement mortar 1:6 (onecement : sixsand) uptofloor all level including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
70Painting un-decoratedceiling and / or sloping roofs surfaces(two coats) with acrlic paint to give aneven shadeincludingthoroughlybrooming the surface to remove all dirt, dust, mortardirt andother foreign matter texture paint including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
71Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
72Applying one coat of Acrylic primer (Spectrum or equivalent of Superior quality) on new concrete/masonry/plastred surfacesafter and including preparing the surface by thoroughly brushing thesurface free from mortar droppings and other foreign matters, sand papering the surface smooth including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
73Applying one coat of AcrylicWashable emulsion Spectrum quartz king or equivalent finish for interior paintingwith brushes plain smooth finish composed of acrylic polymere inemulsion inorganic/special pigment siliceous aggregate anti fungicides anti-rusting & foaming in two coat i/cnecessary putty to give smooth even surface, sand papered smooth including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
74Finishing Outer surface ofWalls in locally availabel GARSA stone cladding in 200x100 x5mm in size in cobination of two colour as per the design shall be fixed properly on the rough wall / on directly brick wall base mortor shallbe 1:4 and tiles shall be fised with cement slurry/ paste on the tiles. the groove of 8 mm shallbe provided in the Slate tiles and filled with the grout to match shade of the tiles including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
75Applying priming coat over new wood and wood based surfaces after and including preparing the surface by throughly cleaning oil grease dirt and other foreign matter sand papering and knotting. readymixed paint brushing wood primer pink including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
76Painting two coats (excluding priming coat) on new wood and wood basedsurface with enamel paint to give an even shade including cleaningthesurface of all dirt, dust and other foreign matter, sand papering and stopping:with enamel paint other than white. including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
77Painting two coats (excluding priming coat) on steel or metalsurfaceswith enamel paint to give an even shade including cleaningthesurface of all dirt,dust and other foreign matter, sand papering and stopping:(a) Withwhite enamel paint or other than white. including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
78Providing under layer for plinth protection of 75 mm(seventy five milimeter) thick ( unconsolidated) bed of dry bricks/stone aggregate 40 mm (forty milimeter ) nominal size well rammed and consolidatedand groutedwithfinesandincludingpreparationofgroundincluding carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
79Providing plinth protection 50 mm (fifty milimeter) thick in cement concrete 1:3:6 (one cement: three sand: six graded stone aggregate 20 mm (twenty milimeter )nominal size) including finishing thetop surface of concrete smooth including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
80Providing & laying in trenches galvanised mild steel tubes (medium grade), tube fittings (earth work in trenches to be measured and paid for seperately) includingcarriage of material in all leads & lifts. (confirming to BIS Specifications)20mm (twenty milimeter )nominal bore. including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
81Providing & fixing to wall ceiling and floor galvanised mild steel tubes (medium grade) tube fittings and clamps including making good the wall, ceiling and floor (confirming to BIS Specifications)including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
8215mm (fifteen milimeter)nominal size
8320mm (twentymilimeter) nominal size.
84Making connection of galvanised steel distribution branch with galvanised mild steel main 20mm (twentymilimeter)to 40mm (forty milimeter)nominal bore by providing and fixing tee including testing and threading the pipesincluding carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
85Providing and fixing polythene water storage tank for storage of water up to all heights keeping water hygenic and safe for drinking etc.moulded to seamless perfection from FDA approved grades ofpolythene (LDPE / HDDE / CIDPE) confirming to BIS- 12701-1989 with 40 mm ( forty milimeter) nominal bore galvanised steel scoure tube with fittings 25mm(twenty five milimeter)nominal bore galvanised miled steel over flow tubes with fittings and mosquito proof coupling of mosquito approved of municipal,design,15mm(fifty milimeter)nominal bore ball valve and as per direction of Engineer-in- charge (i) 1000 liters capacity including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
86Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
8775 mm(seventy five milimeter) nominal size
88110 mm (one hundred ten milimeter) nominal size
89Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
9075 mm(seventy five milimeter) nominal size
91110 mm (one hundred ten milimeter) nominal size
92Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
9375 mm(seventy five milimeter) nominal size
94110 mm (one hundred ten milimeter) nominal size
95Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
9675 mm(seventy five milimeter) nominal size
97110 mm (one hundred ten milimeter) nominal size
98Providing and fixing PVC single equal branch plain ISI marked including fixing with approved adhesive etc. including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
9975 mm(seventy five milimeter) nominal size
100110 mm (one hundred ten milimeter) nominal size
101Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
10275 mm(seventy five milimeter) nominal size
103100 mm (one hundredmilimeter) nominal size
104Providing and fixing cast iron cowlISI marked including fixing with approved adhesive etc. including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
10575 mm(seventy five milimeter) nominal size
106110 mm (one hundredmilimeter) nominal size
107Providing and fixingPVC floor trap ISImarked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc.110 mm X 75 mm. including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
108Providing and fixing vitreous China wash down, water closet (European type. W.C. pan) with integral \"P\" or \"S\" trap including jointing the trap with soil pipe in cement mortar 1:1(one cement : onesand) (Seat and over to be measured and paid for separately):- (ii) Angle Indian Universal closet including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
109Providing and fixing 10.00 (ten) litres low level cistern with apair of C.I or mild steel bracket complete with fittings such as lead valve less syphon 15 mm (fifteen milimter) nominal size brass ball valve completer with polythene float, C.brass handle union and couplings forconnection with inlet, outlet and over flow pipes 40(forty milimeter) mm dia C.P flush bend including cutting holes in walls and making good the same and connection the flush bends with cistern and closet (over flow pipe to be measured and paid seprately) . (confirming to BIS specification 1st quality) including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
110Providing and fixing plastic seat (Solid / Hollow type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers : SOLID TYPEBlack plastic seat and cover. including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
111Providing and fixing vitreous China bowl pattern urinal including connection the urinal with waste pipe by means of white lead mixed with chopped hemp (waste pipe to be measured and paid for separately Flat back type of size 430mm x 260mm x 350mm.(four hundred thirty into two hundred sixty in to three hundted fifty milimeter ) including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
112Providing and fixing PTMT Coloured / white automatic flushing cistern with a pair of PVC / C.I. or M.S. bracket complete with fittings including PVC syphonic apparatus, mosquito proof lid, PVC union and coupling for connections with inlet, outlet and over flow pipes including cutting holes and making good the same ( over flow pipe to be measured and paid for separately)..i) 5 (five)litres net capacity. including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
113Providing & fixing C.P brass flush pipe / Spreaders for urinal withfitting such as unions, clamps etc. (all in C.P. brass) including cutting holes and making good the same 15 mm (fifty milimeter) nominal bore (confirming to BIS Specifications) including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
114Providing and fixing vitreous China wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings:- (ii) 550mmx400mm (five hundred fifty into four hundred milimeter) including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
115Providing and fixing Vitreous China clay Labrotary sink single bowl without drain board (confirming to BIS Specifications Ist quality) ( size 46x 93.5cms code No. Rek 3618) iincluding carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
116Providing and fixing C.P. Brass waste for wash basin or sink32mm (thirty two milimeter) dia including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
117Providing and fixing M.I. Union for wash basin or sink32mm (thirty two milimeter) dia including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
118Providing & fixing P.V.C. plastic waste pipe for wash basin or sink including carriage of material in all leads & lifts (confirming to BIS Specifications) (a) 32 mm(thirty two milimeter) dia
119Providing and fixing 600mm x 450 mm(six hundred into four hundred fifty milimeter ) bevelled edge mirror of superior glass mounted on 6mm thick A.C. Sheet or plywood sheet and fixed to wooden plugs with C.P. Brass screws and washers. including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
120Providing and fixing C.P. Brass Towel rail complete with C.P. Brass brackets fixed to wooden plugs with C.P. Brass screws600mm x 20mmm(six hundred into twentymilimeter )including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
121Providing and fixing 600mm x 120 mm (six hundred into fone hundred twentymilimeter ) glass shelf with C.P. Brass bracket and guard rail complete, fixed to wooden plugs with C.P. Brass screws including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
122Providing and fixing brass bib tap (Superior or heavy type) 15mm (fifteen milimeter) dia including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
123Providing and fixing C.P Brass pillar tap with Capstan head 15mm (fifteen milimeter) dia including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
124Providing and fixing C.P. brass angle valve 15mm (fifteen milimeter) without Nuts and pipe. including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
125Providing & fixing C.P.stop cocks 15mm (fifteen milimeter)dia including carriage of material in all leads & lifts (confirming to BIS Specifications). including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
126Providing and fixing Division Plate for Urinals 600mm x 300. (six hundred into threehundred milimeter )Vitreous China including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
127Providing and fixing P.V.C connection with brass unions15mm (fifteen milimeter) nominal bore including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
128Providing and fixing brass full way valve with wheel including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
12915 mm (fifteen milimeter)nominal bore.
13020mm(twentymilimeter)nominal bore.
131Providing and fixing G.I./M.I Union of following sizes (where not included in the items) including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
13215 mm (fifteen milimeter)dia
13320mm(twentymilimeter)dia
134Providing and fixing stoneware gully trap grade \"A\" complete with C.I grating, brick masonry chamber in cement mortar 1:5 (one :cement five; send)and water tight C. I. cover with frame of 300mmx300mm (three hundred in to three hundred milimeter ) size (inside) the weight of cover to be not less than 4.53kg (four point five three kilogram) and frame to be not less than 2.72kg. (two point seven twokilogram)I Square Mouth Traps :(i) 100mmx100mm(one hundred in to onehundred milimeter )size P type including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
135Constructing man hole with RCC top slab in 1:2:4 mix (one cement: two sand: four graded stone aggregate 20mm nominal size) foundation concrete1:4:8 (one cement : four sand : eightgraded stone aggregate 40mm nominal size) inside plastering 15mm thick with cement mortar 1:3 (1cement 3 sand) finished with a floating coat of neat cement and making channels in concrete 1:2:4 mix (one cement : twosand : fourgraded stoneggregate 20mm nominal size) finished smooth complete including curing and testing: Inside size 800mm x 800mm and 500mm deep including C.I cover with frame. (Light duty single seal pattern - 1) 455 mmx610mm internal dimensions total weight of cover and frame to be not less than 38kg. (Weight of cover 23 kg and weight of frame 15 kg.) (a) With 200mm thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3 (onecement : threesand) including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.

AI Tender Summary

OUR REF NO 28514918
AUTHORITY Government Departments
TENDER VALUE 1.01 Crore
LAST DATE 22-07-2021
Authority
Authority Name Public Works Department
Work Description Construction Of Science Lab Building At Govt. Senior Secondary School Kanaid Tehsil Sundernagar, Distt Mandi ( Hp ) ( Sh-C / O Building Portion And W.S. And S.I ) .
Basic Detail
Tender No 3147-62 dt. 9/7/2021
Bidding Type Tender
Location
City Gohar
State Himachal Pradesh
Key Dates
Publish Date 14 Jul 2021
Submission Date 22 Jul 2021
Open Date 23 Jul 2021
Finance
Tender Value 1.01 Crore
Tender Fee 5000
EMD 2.02 Lakhs
Exemption Not Available
Document List
b3d4c8f3-f82f-4fe8-9cdd-1c7804ac993d.html
2.pdf
BOQ_74590.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 14, 2021
11:30 IST

Tender Published

Tender notice published.

Completed
Jul 22, 2021
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Jul 23, 2021

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

b3d4c8f3-f82f-4fe8-9cdd-1c7804ac993d.html

pdf

2.pdf

xls

BOQ_74590.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender