Construction Of Kissan Bhawan At Manali, Dist. Kullu, H.P Sh Providing Electrical Installation Work Thereof.
Tender Value
11.56 Lakhs
Estimated cost
Bid Submission
28 Jul 2021
0 days left
EMD
23150
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Manali → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Kissan Bhawan At Manali, Dist. Kullu, H.P Sh Providing Electrical Installation Work Thereof.
BOQ
| Sl. No. | Item Description |
| 1 | Wiring for light point/fan point/exhaust fan/call bell point with 1.5 Sq. Mm PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit and earthing the light point with 1.5 Sq.mm HRFRLS/PVC insulated single core copper conductor cable as required Group C as per direction and satisfaction of the Engineer-in-charge. |
| 2 | Wiring for twin control light point with 1.5Sq. mm PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit with 2-way 5/6 amps piano type switch and earthing the light point with 1.5 Sq. mm HRFRLS/PVC insulated single core copper conductor cable as required Grup C. as per direction and satisfaction of the Engineer-in-charge. |
| 3 | Wiring for circuit/sub-main with following sizePVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same for earthing as per direction and satisfaction of the Engineer-in-charge. 2x1.5. Sq. mm |
| 4 | Wiring for circuit/sub-main with following sizePVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same for earthing as per direction and satisfaction of the Engineer-in-charge. 2x4. Sq. mm |
| 5 | Wiring for circuit/sub-main with 4x10 Sq. Mm PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 2 No. 10 Sq. mm (4x10+2x10) HRFRLS/PVC insulated single core copper conductor cable for earthing as required as per direction and satisfaction of the Engineer-in-charge. |
| 6 | Providing laying and fixing of one No. Aluminium conductor, PVC inslated and PVC sheathed armoured/XLPE power cable working voltage 1100 volts grade on surface etc. Of the required size. Armoured cable 35 sq. Mm 3.5 (core) |
| 7 | Wiring for circuit/sub-main with 4x4 Sq. Mm PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 2 No. 4 Sq. mm (4x+2x4) HRFRLS/PVC insulated single core copper conductor cable for earthing as required as per direction and satisfaction of the Engineer-in-charge. |
| 8 | Supplying and drawing following size of PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface/recessed steel/PVC conduit 3x1.5 Sq.mm as per direction and satisfaction of the Engineer-in-charge. |
| 9 | Supplying and fixing of following sizes of PVC conduit along with the accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required, 25 mm dia, as per direction and satisfaction of the Engineer-in-charge. |
| 10 | Supplying and fixing metal box of 100 mm x 100 mm x 60 mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 5 pin 5/6 amps socket outlet and 5/6 amps piano type switch connections painting etc as required. |
| 11 | Supplying and fixing metal box of 180 mm x 100 mm x 60 mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 6 pin 15/16 amps socket outlet and 15/16 amps piano type switch connections painting etc. as required. |
| 12 | Supplying and fixing sheet metal bus-bar chamber suitable for 100 AMP. 415 volts capacity with 4 No. Copper strip bus-bars each of length 300 mm & cross-sectional area (25.4 mm x 3.17mm) enclosure made from 1.6 mm thick M.S sheet having overall dimensions (380mmx400mm x150mm) nominal with all accessories including connections earthing the body etc. as required,as per direction and satisfaction of the Engineer-in-charge. |
| 13 | Supplying and fixing sheet metal bus-bar chamber suitable for 200 AMP. 415 volts capacity with 4 No. Copper strip bus-bars each of length 300 mm & cross-sectional area (25.4 mm x 4.75 mm) enclosure made from 1.6 mm thick M.S sheet having overall dimensions (380mmx450mm x150mm) nominal with all accessories including connections earthing the body etc. as required,as per direction and satisfaction of the Engineer-in-charge. |
| 14 | Providing and fixing TP &N switch disconnector fuse unit cubical type 415/500 volts with 3 No. HBC/HRC fuses in sheet steel enclosure including drilling holes on the board connections earthing the body etc. 100 Amp. Category-A as required, as per direction and satisfaction of the Engineer-in-charge. |
| 15 | Providing and fixing TP &N switch disconnector fuse unit cubical type 415/500 volts with 3 No. HBC/HRC fuses in sheet enclosure including drilling holes on the board connections earthing the body etc. 200 Amp. Category-A as required, as per direction and satisfaction of the Engineer-in-charge. |
| 16 | Supplyinganderection of 6amps. to 32 amps. rating, 10 KA breaking capacity, 240volts, \"C\" curves, miniaturecircuit breaker of following poles in the existing MCB DB complete with connections etc. as per direction and satisfaction of the Engineer-in-charge. a) Single pole. Cat-A. |
| 17 | Supplying and erection of 40/50/63 amps rating 10 KA breaking capacity 240 volts \"C\" curves miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required , as per direction and satisfaction of the Engineer-in-charge.a) Double pole Cat A. |
| 18 | Supplying and erection of 40/50/63 amps rating 10 KA breaking capacity 240 volts \"C\" curves miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required ,Triple pole & Neutral Cat-A as per direction and satisfaction of the Engineer-charge. |
| 19 | Supplying and fixing following rating double pole (single phase & neutral) 240 volts residual current circuit breaker (RCCB) having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections testing and commissioning etc. as required, as per direction and satisfaction of the Engineer-charge. |
| 20 | Supplying and fixing of following way triple pole and neutral sheet steel MCB distribution board 415 volts on surface/recess with provision for 4--pole MCB/ Isolator/RCCB/RCBO as incomer and SP MCBs as outgoing complete withtinned copper bus-bar wire set neutral link earth bar din-bar detachable gland plate cable identification labels interconnections phosphatized and powder painted including earthing etc. as required, as per direction and satisfaction of the Engineer-charge. Double door 12 way (8+36) horizontal type . |
| 21 | Earthing with G.I. Earth pipe 4.5 mtr. long and 40 mm dia including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal ofr coke and salt) compltee as required, as per direction and satisfaction of the Engineer-in-charge. |
| 22 | Extra for using salt and charcoal for pipe earth electrode complete as required as per direction and satisfaction of the Engineer-in-charge. |
| 23 | Supplying and laying 6 SWG G.I. Wire at 0.50 mtr. below ground level for earth electrode conductor including soldering etc. As required, as per direction and satisfaction of the Engineer-in-charge. |
| 24 | Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers includig embedding of expansion-bolts in the wall providing and fixing of Non-return valve Dead weight safety valve 2 No C.P. connection rods 18\" long making good the damages electrical connections safety valve connections testing and commissioning etc. as required, as per direction and satisfaction of the Engineer-in-charge. |
| 25 | Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Non-return valve, Dead weight safety valve, 2 No C.P. connection rods 18\" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc.25 Liter capacity water heater (Cat-A) |
| 26 | Providing and installation of exhaust fan of following sizes in the existing opening including making the hole to suit the size of the above fan making good the damages connections testing and commissioning etc. as required. Exhaust Fan Light duty, (Domestic) 300 mm sweep as per direction and satisfaction of the Engineer-in-charge. |
| 27 | Supplying and fixing Ding-Dong/Electronic musical bell make anchor bajaj havells or equivalentsuitable for D.C/A.C. Single phase 230 volts complete as required, as per direction and satisfaction of the Engineer-in-charge. |
| 28 | Supplying and fixing following rating piao type switch/socket on the existing switch box/cover i/c connection etc. As required, TV socket outlet piano type. |
| 29 | Supplying and fixing following rating piao type switch/socket on the existing switch box/cover i/c connection etc.Telephone socket outlet piano type. |
| 30 | Supplying and fixing of fancy wall bracket containing thread type CFL lamp holder (s) of all sizes and shapes, complete with all accessories but excluding CFL lamp including making connections, testing etc. Fixed type wall bracket 150 dia single lamp(Category-A) as per direction and satisfaction of the Engineer-in-charge. |
| 31 | Supplying and fixing of fancy wall bracket containing thread type CFL lamp holder (s) of all sizes and shapes, complete with all accessories but excluding CFL lamp including making connections, testing etc. Mirror light 460 mm single lamp (Category-A) as per direction and satisfaction of the Engineer-in-charge. |
| 32 | Supplying and erection of street light bracket made of G.I. Pipe \"A\" class of suitable length and dia the pipe bended to give an angle of 100 to 110 degree fitted with bolt & nuts at the top of existing pole or wall including painting the pipe with two coatsof approved paint over priming coat complete in all respects as required,as per direction and satisfaction of the Engineer-in-charge. 40 mm & G.I pipe heavy class. |
| 33 | Supplying & FIXING down light 6 W light with aluminium housing complete with all accessories connections testing and commissioning etc. As required complete in all respects and to the best satisfaction of Engineer-in-Charge. Makes Jaquar NERO SURFACE ROUND (Cat no LNRO02R006SC) C&S/Crompton/bajaj or Equivalent make. |
| 34 | Supplying & fixing 25 watt LED Street light in aluminium pressure die cast housing with toughened glass cover (IP66 rating) complete with all accessories connections testing and commissioning etc. as required complete in all respets and to the best satisfaction of Engineer in charge. Makes Jaquar (LED Street light) (Cat no LSRT01S025Xw) C&S/Crompton/bajaj or Equivalent make. |
| 35 | Supplying and fixing 20 watt LED High qualitydesign PC battenwith decorative end caps complete with all accessories connections testing and commissioning etc, as required complete in all respets and to the best satisfaction of Engineer in charge. Make:- Jaquar (Glaze LED Batten PC) Cat No. LGLZPCXW) C&S/Crompton/bajaj or Equivalent. |
AI Tender Summary
Tender Timeline
Jul 14, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedJul 28, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 30, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender