|
| 1 | Cutting in earth work in all heights/depths and in all kinds of soil, such as kankar, moorum, shingle and composed or soft rock, hard rock including their intermediate classification and chiselling/wedging out rock where blasting is prohibited including saturated soil and fillings in embankments site level etc., where ever necessary, by manual / machinical means as per Technical specification clause 1603.1, including disposal of all excavated unserviceable material in all leads and lifts at approved dumping site. All useful materials such as stones, aggregate and slates etc. shall be sorted out and stacked along, the road side which shall not be less than 164.44 Cum. In case of failure to do so, the recovery for the same shall be affected @350/-per Cum Any damage to the private/public property during execution will be restored by the contractor what-soever the nature of the same may be. The serviceable materials will be stacked in specified dimensions in all leads and lifts as per the direction of the Engineer-in-charge. |
| 2 | Excavation in earth work and filing in 15 cm layers in foundation and plinths including ramming watering and consolidating upto a lead of 20 metres and lift upto a 1.5 metres Spade work,Pick work, including carriage of materialswithin all leads and liftsand other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. |
| 3 | Excavationin foundation trenches etc. in earth work in all heights anddepth in all kinds of soils, including saturated soil comprising of pick work, jumper work, and blasting work both in soft and hard rock with chisellingand wedging out of rock (where blasting is prohibited) andtheir intermediate classificationof soilsincluding, dewatering wherever required, settingout to required lines,levels as shown on the drawing and directed by the Engineer -in-Charge at site. according to the HP.PWD. specification of 1990 (one thousand nine hundred ninety) volume-I (one) and sorting out useful and un- useful material and transportation of the un -useful material for disposing at approved dumping site or otherwise and including payment of prescribed charges of dumping to the owner of dumping site (to be arranged by the contractor) satisfaction of Engineer- in -Charge through all modes of transportation including head load, animal load or mechanical means along with its leveling fine dressing and with all kinds of labour ,machineries, tools equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour (if required ). |
| 4 | Providing and laying of boulder apron laid in wire crates with 4 mm dia GI wire conforming to IS:280 and IS:4826 in 100 mm x 100 mm mesh (woven diagonally) including 10 per cent extra for laps and joints laid with stone boulders weighing not less than 25 kg each as per drawing and technical specifications Clause 1301including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges. |
| 5 | Hiring of vibrating roller cum soil compactor 80-100 KN for compacting of ordinary soil @ 100 cum/Hour.and entire satisfactionand directions of the Engineer-in-charge |
| 6 | Providing and laying plain cement concrete 1:5:10 (one cement; threesand : sixgradedcrushed stone aggregate 40mm(twenty millimeters) nominal sizemixed and vibrated mechanicallyand curing completeinorunderwater including pumping or bailing out water /dewatering removalofslushwhich may arise at thetime of laying under water complete excluding the cost of form workin foundation and plinth in all depths/ heights as per HP.PWD.Specifications, approved drawings, designsand entire satisfactionand directions of the Engineer-in-chargeincluding carriage of materialswithin all leads and liftsand other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government.. |
| 7 | Stone filling behindretaing wall , with in all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government |
| 8 | Providingform work with steel plates 3.15mm(threepoint one fivemillimeters) thick,welded with angle iron in frame30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finishincluding centering ,shuttering, strutting andpropping etceterawith wooden battens and ballies, height of propping and centering in all heights belowsupporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete workin foundation, footing, basis of column etcetra . and massconcrete complete as per HP.PWD.Specifications, approved drawings, designsand entire satisfactionand directions of the Engineer-in-chargeincluding carriage of materialswithin all leads and liftsand other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government |
| 9 | Providingform work with steel plates 3.15mm(threepoint one fivemillimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finishincluding centering ,shuttering, strutting andpropping etceterawith wooden battens and ballies, height of propping and centering in all heights belowsupporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in Beams, cantilevers, girders and lintels, sides of soffits of beams, beams haunchings, girders, cantilevers, bressumers and lintels uptoanydepth /heights upto all floor levelas per HP.PWD.Specifications, approved drawings, designsand entire satisfactionand directions of the Engineer-in-charge including carriage of materialswithin all leads and liftsand other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government |
| 10 | Providingform work with steel plates 3.15mm(threepoint one fivemillimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finishincluding centering ,shuttering, strutting andpropping etceterawith wooden battens and ballies, height of propping and centering in all heights belowsupporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in Columns, pillars post and struts (square rectangular or polygonal in plain in any heights / thickness/depths etcetera upto all foor level as per HP.PWD.Specifications, approved drawings, designsand entire satisfactionand directions of the Engineer-in-chargeincluding carriage of materialswithin all leads and liftsand other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government |
| 11 | Providingform work with steel plates 3.15mm(threepoint one fivemillimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finishincluding centering ,shuttering, strutting andpropping etceterawith wooden battens and ballies, height of propping and centering in all heights belowsupporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete workin flat surfaces such as soffits of suspended floors, roofs, landings , shelves andthe like floor etcetra .upto anythicknessupto all floor level as per HP.PWD.specifications, approved drawings, designsand entire satisfactionand directions of the Engineer-in-chargeincluding carriage of materialswithin all leads and liftsand other incidentals..The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government |
| 12 | P/L reinforced cement concrete M20 Design Mix1:1½:3 ( one cement : one and half sand : threegraded crushed hard stone aggregate 20 mm (twenty milimeter) nominal size) ,mechanically mixed vibrated and curing complete excluding cost of form work and reinforcement for reinforced concrete work as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government inFoundations,footings bases of columns and the like and mass concrete. |
| 13 | P/L reinforced cement concreteM20 Design Mix 1:1½:3( one cement : one and half sand : threegraded crushed hard stone aggregate 20 mm (twenty milimeter) nominal size) ,mechanically mixed vibrated and curing complete excluding cost of form work and reinforcement for reinforced concrete work as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. inColumns, pillars posts and struts upto floor two level. |
| 14 | P/L reinforced cement concreteM20 Design Mix 1:1½:3( one cement : one and half sand : threegraded crushed hard stone aggregate 20 mm (twenty milimeter) nominal size) ,mechanically mixed vibrated and curing complete excluding cost of form work and reinforcement for reinforced concrete work as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges. in Suspended Floor roofs, landing and shelves and their support balconies,beams, girders,bressumers and contilever upto floor two level. The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. |
| 15 | Providing and laying cement concrete 1:3:6 (one cement: three sand: six graded stone aggregate 20mm(twenty milimete) nominal size) and curing complete excluding cost of form work in walls including butress plaster and their caps course etc as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. |
| 16 | Providing Tor steel reinforcement of TATA Tiscon/SAIL/Rashtria Ispat incluiding cost of binding wire for R.C.C. work including cutting, bending, binding and placing in position complete in all floor levels inall heights including carriage of materialsthrough all modes of transportations with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. |
| 17 | Brick work using Second class common burnt clay building bricks in super structure above plinth level in all floors up to all heights and levels in cement mortar 1:6(One cement isto Six sand) as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government |
| 18 | Providing and fixing panelled glazed or panelled & glazed shutters for doors windows and clerestory windows including black enamelled iron butt hinges with necessary screws2nd class deodar wood 35 mm thick. including carriage of material in all leads & lifts.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. |
| 19 | Providing wood work in frames of doors, windows, clerestory, windows and other frames wrought, framed and fixed in position within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. 2nd class deodar wood.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. |
| 20 | Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etc. complete. within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge.300 x 16mm.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. |
| 21 | Providing and fixing aluminium tower bolts (berrel type) anodized trans parent or dyed to required shade and colour with screws etc. complete. .including carriage of material in all leads and lifts.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. (a) 200x10 mm |
| 22 | Providing and fixing aluminium handles anodized transparent or dyed to required colour and shade with necessary screws etc. complete.100 mm with in all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. |
| 23 | Providing and fixing 100mm bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness completeas as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment |
| 24 | Steel work welded in builtTATA SAIL and RASHTRIYA ISPAT up sections trusses and framed work including cutting hoisting fixing in position and applying a priming coat of red lead paint In beams joists channels angles tee flats with connecting plates or angle cleats as in main and cross beams hip and jack rafters purlins connected to common rafters and the like within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. |
| 25 | 15 (Fifteen) millimeters thick cement plaster in single coat on the rough side of brick/concrete/ stone walls for interior plastering up to all heights including arises. Internal rounded angles, chamfers and/or rounded angles not exceeding 80 (Eighty) millimeters in girth and finished even and smooth in cement mortar 1:6(One cement: Six sand)as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. |
| 26 | 15 (Fifteen) millimeters thick cement plaster in single coat on the fair side of brick/concrete/ stone walls for interior plastering up to all heights including arises. Internal rounded angles, chamfers and/or rounded angles not exceeding 80 (Eighty) millimeters in girth and finished even and smooth in cement mortar 1:6(One cement: Six sand)as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. |
| 27 | Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete.with in all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. |
| 28 | Distempering (one coat) with oil bound washable distemper of approved brand and manufature and of required shade on decorated wall surfaces to give an even shade after thoroughly brushing the surface clean of all grease dirtloose pieces of scales andalso includingpreparing the surface even and sand papered smooth, with in all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. |
| 29 | Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surface (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc.with in all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. |
| 30 | Applying priming coat over new wood and wood based surfaces after and including prepering the surface by thoroughlycleaning oil,grease,dirt and other foreign matter) sand papering and knotting. With Readymixed paint brushing with white lead for priming including carriage of materials in all leads and liftsas per direction / satisfaction of the Engineer-in-charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. |
| 31 | Painting two coats(excluding coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt,dust and other foreign matter,sand papering & stoping with white enamel paint. including carriage of materials in all leads and liftsas per direction / satisfaction of the Engineer-in-charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. |
| 32 | Painting two coats (excluding) priming coat on new steel and other metal surface with enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foregin matters :Enamelpaint.other then white. including carriage of material within all leads and lifts as per direction of Engineer-in-charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. |
| 33 | Providing and fixing 0.60mm thick prepainted steel sheet ofTATA (Durashine) of approved shade and design in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5microns primer coating to back coat of polyster of 5microns over 5 microns primer coating including fixing with G.I. self drilling screws of required sizes / prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. |
| 34 | Providing and fixing ridges or hips 60 cm overall with 0.60mm thick prepainted steel sheets of TATA Durashine in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washerscomplete as per HP.PWD., Specifications of 1990 volume-I includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. |
| 35 | Providing and fixing M.S. BP Sheet2mm thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely) complete as per HP.PWD., specifications of 1990 volume-I includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. |
| 36 | Stone soling properly hand packed filling interstices with Kharanja stone and consolidating by rammingmanually to the required gradient and camber including spreading ,watering and rolling of binding materials moorum or earth etc. within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. |
| 37 | Providing and laying mechanically mixed vibrated cement concrete 1:4:8 (1 cement :4 sand :8 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of form work in Foundation and plinth. within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. |
| 38 | Cement concrete flooring 1: 2:4(1 cement :2 sand :4 graded stone aggregate 20mm nominal size ) laid in one layer finished with a floating coat of neat cement(a) 40mm thick, with in all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. |
| 39 | Providing and laying water drainage pipes 160 mm dia for drainage, including all accessories and fitting etc, with in all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. |
