General-Plan Scheme-Construction Of Smart Village Office At Vandanmedu-General Civil Work-1, Vandanmedu-Kerala

TDR : 28509830

Tender Notice
BOQ

Expired

Vandanmedu , Kerala

Tender Brief : General-Plan Scheme-Construction Of Smart Village Office At Vandanmedu-General Civil Work-1

Document Fees
₹ 2760 /-

EMD
₹ 50000.0 /-

Tender Value
₹ 35.26 Lakhs /-

Submission Date
23-07-2021

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Work Name:GENERAL-plan scheme-Construction of Smart Village office at Vandanmedu-General Civil Work-1
1	1	Earth works
2	1.001	2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil	BI01010001010000000000000515BI0100001114	42.421	cum
3	1.002	2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil	BI01010001010000000000000515BI0100001115	22.839	cum
4	1.003	2.25:Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.	BI01010001010000000000000515BI0100001116	45.491	cum
5	2	Concrete and aligned works
6	2.001	4.1.5:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)	BI01010001010000000000000515BI0100001118	4.976	cum
7	2.002	4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)	BI01010001010000000000000515BI0100001119	13.046	cum
8	2.003	5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size	BI01010001010000000000000515BI0100001120	17.478	cum
9	2.004	5.2.2:Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)	BI01010001010000000000000515BI0100001121	3.78	cum
10	2.005	5.3:Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 150 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).	BI01010001010000000000000515BI0100001122	29.307	cum
11	2.006	5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete	BI01010001010000000000000515BI0100001123	43.68	sqm
12	2.007	5.9.5:Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers	BI01010001010000000000000515BI0100001124	205.564	sqm
13	2.008	5.9.6:Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts	BI01010001010000000000000515BI0100001125	50.4	sqm
14	2.009	5.9.3:Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform	BI01010001010000000000000515BI0100001126	158.558	sqm
15	2.01	5.9.16.1:Centering and shuttering including strutting, etc. and removal of form for:\nEdges of slabs and breaks in floors and wallsUnder 20 cm wide	BI01010001010000000000000515BI0100001127	99.54	metre
16	2.011	5.22A.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more	BI01010001010000000000000515BI0100001128	4888.83	kg
17	3	Masonry works
18	3.001	50.6.1.4:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand ) etc complete	BI01010001010000000000000515BI0100001130	2.322	cum
19	3.002	50.6.1.5:Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete	BI01010001010000000000000515BI0100001131	28.944	cum
20	3.003	50.6.2.2:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete	BI01010001010000000000000515BI0100001132	5.179	cum
21	3.004	OD7132/2021-2022:Dry Rubble Masonry for foundation and superstructure including all cost of materials, Labour charges , Conveyance etc.. completed.\r\n	BI01010001010000000000000515BI0100001133	14.28	cum
22	4	Finishing works
23	4.001	13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)	BI01010001010000000000000515BI0100001135	433.71	sqm
24	4.002	13.11:18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 ( 1 cement : 6 fine sand).	BI01010001010000000000000515BI0100001136	15.744	sqm
25	4.003	13.27:Extra for lining out plaster to imitate stone or concrete blocks walling.	BI01010001010000000000000515BI0100001137	15.744	sqm
26	4.004	13.80:Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.	BI01010001010000000000000515BI0100001138	105.15	sqm
27	4.005	13.16.1:6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand)	BI01010001010000000000000515BI0100001139	138.051	sqm
28	4.006	13.7.1:12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand)	BI01010001010000000000000515BI0100001140	158.414	sqm
29	4.007	13.46.1:Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)	BI01010001010000000000000515BI0100001141	639.249	sqm
30	4.008	13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work	BI01010001010000000000000515BI0100001142	22.815	sqm
31	4.009	13.50.1:Applying priming coat:With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)	BI01010001010000000000000515BI0100001143	22.815	sqm
32	4.01	13.52.1:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work	BI01010001010000000000000515BI0100001144	22.56	sqm
33	5	Flooring works
34	5.001	11.37:Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.	BI01010001010000000000000515BI0100001146	27.828	sqm
35	5.002	11.36:Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.	BI01010001010000000000000515BI0100001147	38.646	sqm
36	5.003	8.2.2.2:Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 sqm	BI01010001010000000000000515BI0100001148	0.84	sqm
37	5.004	OD8470/2021-2022:Providing and laying full body vitrified floor tiles with matt finish in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), excluding grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x1200 mm	BI01010001010000000000000515BI0100001149	97.778	sqm
38	5.005	8.5:Extra for providing opening or required size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar location in marble/granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.	BI01010001010000000000000515BI0100001150	1	each
39	5.006	8.13.1:Providing and laying Polished Granite stone flooring in required design and\npatterns, in linear as well as curvilinear portions of the building all complete as\nper the architectural drawings with 18 mm thick stone slab over 20 mm (average)\nthick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with\ncement slurry and pointing with white cement slurry admixed with pigment of\nmatching shade including rubbing , curing and polishing etc. all complete as\nspecified and as directed by the Engineer-in-Charge.Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or\r\nequivalent.	BI01010001010000000000000515BI0100001151	7.71	sqm
40	5.007	OD8482/2021-2022:Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg). including filling /grouting and finishing complete as per direction of Engineer-in-charge.Size of Tile 600x1200mm	BI01010001010000000000000515BI0100001152	97.778	sqm
41	5.008	8.3.2:Providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer -in-Charge.Granite work	BI01010001010000000000000515BI0100001153	10.6	metre
42	5.009	22.5:Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg /sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.	BI01010001010000000000000515BI0100001154	24.33	sqm
43	6	Joinery works
44	6.001	50.9.1.1:Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood	BI01010001010000000000000515BI0100001156	0.309	cum
45	6.002	50.9.2.1:Providing and fixing paneled and glazed shutters for doors, windows and clerestory windows, 35 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineerin - charge using Anjili/ Jack wood	BI01010001010000000000000515BI0100001157	6.92	sqm
46	6.003	50.9.4.1:Providing and fixing paneling or paneling and glazing in paneled or paneled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured) paneling for paneled or paneled and glazed shutters 25 mm to 40 mm thick using good quality Anjili/ Jack wood	BI01010001010000000000000515BI0100001158	3.539	sqm
47	6.004	9.53:Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)	BI01010001010000000000000515BI0100001159	24	each
48	6.005	9.63.2:Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete:200x10 mm	BI01010001010000000000000515BI0100001160	8	no
49	6.006	9.66.2:Providing and fixing ISI marked oxidised M.S. handles conforming to IS : 4992 with necessary screws etc. complete:100 mm	BI01010001010000000000000515BI0100001161	8	no
50	6.007	OD7089/2021-2022:Providing Pad Lock 65 mm or nearest size (7 lever)	BI01010001010000000000000515BI0100001162	4	each
51	6.008	OD8626/2021-2022:Supplying and fixing 200 mm stainless steel Aldrop	BI01010001010000000000000515BI0100001163	4	each
52	6.009	9.121:Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminated shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.	BI01010001010000000000000515BI0100001164	15.2	metre
53	6.01	9.122.1:Providing and fixing to existing door frames.30 mm thick Glas Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS : 14856, including fixing to frames.	BI01010001010000000000000515BI0100001165	4.8	sqm
54	7	Sanitary and Water Supply Works
55	7.001	17.2.1:Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid	BI01010001010000000000000515BI0100001167	2	each
56	7.002	17.1.1:Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litter low level white P.V.C.flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever require:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests	BI01010001010000000000000515BI0100001168	1	each
57	7.003	OD7091/2021-2022:Providing and fixing under counter oval shape wash basin 515x420 mm or nearest size with C.I. brackets, 15 mm C.P. brass pillar taps including connecting pipes with all fittings 32 mm dia rubber plugs 32 mm dia CP brass waste coupling, etc. complete as directed by the Engineer-in-charge.	BI01010001010000000000000515BI0100001169	1	each
58	7.004	17.7.6:Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Angle back wash basin size 400x400 mm with single 15 mm C.P. brass pillar tap	BI01010001010000000000000515BI0100001170	3	each
59	7.005	17.22A:Providing and fixing CP Brass 32mm size Bottle trap of approved quality & make and as per the direction of Engineer in charge.	BI01010001010000000000000515BI0100001171	4	no
60	7.006	18.51.1:Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore	BI01010001010000000000000515BI0100001172	5	each
61	7.007	18.62.3:Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P / H.P.H.D plastic ball.25 mm nominal bore, 152 mm long, weighing not less than 440 gms	BI01010001010000000000000515BI0100001173	3	no
62	7.008	18.53.1:Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore	BI01010001010000000000000515BI0100001174	8	each
63	7.009	50.18.8.3.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 25 mm pipe 10kgf /cm2	BI01010001010000000000000515BI0100001175	25	metre
64	7.01	50.18.7.3.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia 10Kgf/ cm2- Internal work- Exposed on wall	BI01010001010000000000000515BI0100001176	20	metre
65	7.011	50.18.7.6.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing . This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 6 Kgf/cm2 - Internal work- Exposed on wall	BI01010001010000000000000515BI0100001177	5	metre
66	7.012	50.18.8.6.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 50 mm pipe 6 kgf/cm2	BI01010001010000000000000515BI0100001178	10	metre
67	7.013	50.18.9.20.7:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia vent cowl	BI01010001010000000000000515BI0100001179	1	no
68	7.014	50.18.9.17.1:Providing and fixing PVC pipes including fixing the pipe with clamps/ clip at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 6 Kgf/cm2 - External work - Exposed on wall	BI01010001010000000000000515BI0100001180	20	metre
69	7.015	50.18.8.7.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work including cutting chases and making good the wall etc. 63 mm pipe 6 Kgf/cm2	BI01010001010000000000000515BI0100001181	20	metre
70	7.016	50.18.9.14.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 6 Kgf/cm2 - External work - Exposed on wall	BI01010001010000000000000515BI0100001182	20	metre
71	7.017	50.18.9.16.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 6Kgf/cm2 - External work - Exposed on wall	BI01010001010000000000000515BI0100001183	5	metre
72	7.018	50.18.8.9.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chased and making good the wall etc. 110 mm pipe 6kgf/cm2	BI01010001010000000000000515BI0100001184	20	metre
73	7.019	50.18.9.19.1:Providing and fixing PVC pipes including fixing the pipe with clamps/ clips/ at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 mm dia 6 Kgf/cm2 - External work- Exposed on wall	BI01010001010000000000000515BI0100001185	20	metre
74	7.02	50.18.9.7.1:Providing and fixing PVC pipes includings of pipes with one step PVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer in Charge. 63 mm dia 6Kgf/cm2	BI01010001010000000000000515BI0100001186	15	metre
75	7.021	50.18.9.9.1:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2	BI01010001010000000000000515BI0100001187	15	metre
76	7.022	50.18.9.20.10:Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63x50 mm dia Reducer	BI01010001010000000000000515BI0100001188	3	no
77	7.023	50.18.9.20.1:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Elbow	BI01010001010000000000000515BI0100001189	5	no
78	7.024	50.18.9.20.2:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement -63 dia 45 degree Elbow	BI01010001010000000000000515BI0100001190	3	no
79	7.025	50.18.9.20.4:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Bend	BI01010001010000000000000515BI0100001191	3	no
80	7.026	50.18.9.20.5:Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes including jointing with PVC solvent cement - 63x63x63 mm dia Tee	BI01010001010000000000000515BI0100001192	3	no
81	7.027	50.18.9.22.1:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia Elbow	BI01010001010000000000000515BI0100001193	5	no
82	7.028	50.18.9.22.2:Providing and fixing PVC moulded fittings / accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia 45 degree Elbow	BI01010001010000000000000515BI0100001194	5	no
83	7.029	50.18.9.22.3:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement-110 mm dia Door Elbow	BI01010001010000000000000515BI0100001195	3	no
84	7.03	50.18.9.22.4:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement- 110 mm dia Bend	BI01010001010000000000000515BI0100001196	3	no
85	7.031	50.18.9.22.5:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes including jointing with PVC solvent cement 110x110x110 mm dia Tee	BI01010001010000000000000515BI0100001197	3	no
86	7.032	50.18.9.22.6:Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110x110x110 mm dia Door tee	BI01010001010000000000000515BI0100001198	3	no
87	7.033	OD7090/2021-2022:supplying and fixing 125 mm SS gratings	BI01010001010000000000000515BI0100001199	3	each
88	7.034	50.17.1.1:Supplying and fixing Stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.	BI01010001010000000000000515BI0100001200	4	no
89	7.035	50.17.1.2:Supplying and fixing CP Towel rod 45cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.	BI01010001010000000000000515BI0100001201	3	no
90	7.036	50.17.1.4:Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge.	BI01010001010000000000000515BI0100001202	2	no
91	7.037	18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.	BI01010001010000000000000515BI0100001203	1000	Litre
92	8	Steel ,Aluminium and upvc works
93	8.001	10.26.1:Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approves steel primer.M.S. tube	BI01010001010000000000000515BI0100001205	322.56	kg
94	8.002	21.1.1.1:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):\nFor fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15)	BI01010001010000000000000515BI0100001206	226.17	kg
95	8.003	50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	BI01010001010000000000000515BI0100001207	540	kg
96	8.004	21.1.2.1:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Anodised aluminium ( anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15)	BI01010001010000000000000515BI0100001208	42.63	kg
97	8.005	21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness	BI01010001010000000000000515BI0100001209	40.047	sqm
98	8.006	9.83:Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.	BI01010001010000000000000515BI0100001210	3	no
99	8.007	21.2.1:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side	BI01010001010000000000000515BI0100001211	14.175	sqm
100	8.008	9.48.1:Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding	BI01010001010000000000000515BI0100001212	396.27	kg
101	8.009	9.147D.1:Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 +/- 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately)\nNote: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Two track two panels sliding window made of (small series) frame 52 x 44 mm &\r\nsash 32 x 60 mm both having wall thickness of 1.9 +/- 0.2 mm and single glazing\r\nbead of appropriate dimension. (Area of window upto 1.75 sqm)	BI01010001010000000000000515BI0100001213	21.75	sqm
102	8.01	OD9185/2021-2022:od52191/2019_2020 : Providing and fixing stainless steel (Grade 304) three dimension English Letters or Numbers , 22 gauge front side and projection 24 gauge including buffing, polishing and and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the Letters to the wall with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc. as per approval of Engineer-in-charge, 30.00 cm height SS 3D letters	BI01010001010000000000000515BI0100001214	28	each
103	9	Furnishing works
104	9.001	OD8155/2021-2022:Providing and fixing Pre-laminated High density fiber board IS :14587 : 1998 marked, with both side decorative lamination Grade-1 (exterior grade ) in shelves with screws and fittings wherever required, edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand ( fittings to be paid separately). Pre laminated with decorative lamination one Grade I HDF Board 18mm thick confirming.	BI01010001010000000000000515BI0100001216	106.41	sqm
105	9.002	OD9093/2021-2022:Providing and fixing Pre-laminated High density fiber board IS :14587 : 1998 marked, with both side decorative lamination Grade-1 (exterior grade ) in shelves with screws and fittings wherever required, edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand ( fittings to be paid separately). Pre laminated with decorative lamination one Grade I HDF Board 12 mm thick confirming.	BI01010001010000000000000515BI0100001217	67.47	sqm
106	9.003	9.100.1:Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:125 mm	BI01010001010000000000000515BI0100001218	20	no
107	9.004	OD8159/2021-2022:Supplying and providing in position etching sticker as per the design and drawing including cost and conveyance of all materials, labour charges etc complete.	BI01010001010000000000000515BI0100001219	34.65	sqm
108	9.005	9.115:providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per directions of Engineer -in-charge.	BI01010001010000000000000515BI0100001220	16	set
109	10	Consruction of bore well
110	10.001	OD8595/2021-2022: Conducting Geo physical Survey for Ground water Exploration	BI01010001010000000000000515BI0100001222	1	L.S
111	10.002	OD8596/2021-2022:Supplying and erecting PVC casing pipe of 180 mm dia 6 kg/cm2	BI01010001010000000000000515BI0100001223	12	metre
112	10.003	OD8597/2021-2022: Supplying and fixing 180 mm PVC end cap	BI01010001010000000000000515BI0100001224	1	each
113	10.004	OD8598/2021-2022:Boring / drilling bore well of required dia for casing / strainer pipe, by suitable method prescribed in IS: 2800 ( part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools plants & machineries required for the job, all complete as per direction of Engineer - in- Charge, . All types soil/Rock 150 mm dia	BI01010001010000000000000515BI0100001225	167	metre

Need a Bussiness Loan? Apply Now!
Buy Digital Signature
Bidding Support

Also Visit

Tenders

Kerala Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

General-Plan Scheme-Construction Of Smart Village Office At Vandanmedu-General Civil Work-1, Vandanmedu-Kerala

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

General-Plan Scheme-Construction Of Smart Village Office At Vandanmedu-General Civil Work-1, Vandanmedu-Kerala

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us