| 1 | 1 | M&L for PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in surface channel and drain and including demolition complete all as specified and directed.\n | | 15 | Cum |
|---|
| 2 | 2 | M&L cement concrete 1:2:4 type B1, (using 20 mm graded crushed stone aggregate) as in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, benching, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating and including necessary formwork & demoliton complete all as specified and directed.\n | | 3.5 | Cum |
|---|
| 3 | 3 | Use and Waste of formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter for rough finished flat surfaces of concrete complete all as specified and directed.\n | | 38 | Sqm |
|---|
| 4 | 4 | M&L precast cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) in landing, cover slabs (for manholes etc), chullah hoods, chajja, water troughs, mangers, shelves and similar articles with plain faces and set in cement mortar 1:4 including necessary forms, moulds etc. & demoliton complete all as specified and as directed.\n | | 3 | Cum |
|---|
| 5 | 5 | M&L mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.\n | | 250 | Kg |
|---|
| 6 | 6 | All as per Sl item No.5 above but 6 to 8 mm dia.\n\n | | 100 | Kg |
|---|
| 7 | 7 | M&L mild steel round bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.\n | | 1100 | Kg |
|---|
| 8 | 8 | M&L brick work with sub class 'B' brick, straight or curved on plan exc. 6 m mean radius built in CM 1:6 including demolition complete all as specified and directed.\n | | 12 | Cum |
|---|
| 9 | 9 | All as per Sl item No. 8 above but except bricks.\nNote:- Serviceable quantity of bricks obtained from demolition shall be reused under this item.\n | | 1.5 | Cum |
|---|
| 10 | 10 | M&L brick work with sub class 'B' bricks straight or curved on plan to any radius, built in CM 1:4 as in half brick thick wall / drain including demolition complete all as specified and directed.\n | | 375 | Sqm |
|---|
| 11 | 11 | M&L brick work with fly ash brick, straight or curved on plan exc. 6 m mean radius built in CM 1:6 and including demolition complete all as specified and as directed.\nMake :- ICL Concrete Industries / Vaishnodevi Buildcon Private Ltd / Koshi Brick Industries Pvt Ltd / Shankar Oil & Saw Mills\n | | 15 | Cum |
|---|
| 12 | 12 | M&L flush pointing to brick walls in cement mortar 1:3 complete all as specified and directed.\n | | 120 | 10 Sqm |
|---|
| 13 | 13 | M&L 15 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth using extra cement complete all as specified and directed.\n | | 235 | Sqm |
|---|
| 14 | 14 | M&L 75 mm thick, PCC 1:3:6, type C-1 (using 20 mm graded crushed stone aggregate) as in floors, paths, plinth protection, hardstanding etc. including demolition complete all as specified and directed.\n | | 850 | Sqm |
|---|
| 15 | 15 | M&L vitrified paver tiles of size 300 x 300 mm and 8 to 10 mm thick (square / rectangular) as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15 mm thick in CM 1:4 and dismantling complete all as specified and directed. \nMake:- M/s Asian Granito India Ltd. / M/s Somany Ceramics Limited / M/s Varmora Granito Pvt Ltd / M/s OASIS Vitrified Pvt Ltd / M/s Sunshine Tiles Co (P) Ltd (Tiles)\nOrient Bell Ltd / H & R Johnson India Ltd\n | | 180 | Sqm |
|---|
| 16 | 16 | M&L cement concrete chequered tiles 300 x 300 x 25 mm thick with grey cement with pigment, set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces as in floors laid over and including 15 mm thick screed bed in CM 1:4 and dismantling complete all as specified and directed. \nMake : Lovely / Anjali / Ultra / Bansal / Nitco / Multiwyn\n | | 570 | Sqm |
|---|
| 17 | 17 | M&L 60 mm thick machine pressed precast concrete interlocking coloured paver block of any shape and size confirming to IS 15658-2006, M-35 grade, set with grey cement and pigment, laid over and including 25 mm thick sand cushioning complete all as specified and directed. \nMake :- Lovely / Anjali tiles / Ultra tiles Pvt Ltd / Terra Firma / Ecco Scope / Mehtab tiles\n | | 220 | Sqm |
|---|
| 18 | 18 | S&F in repairs PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints laid in trenches or in floorscomplete all as specified and as directed. \nMake:- Supreme / M/s Fusion Industries Ltd / M/s Skipper Ltd / M/s HIL Limited\n | | 80 | RM |
|---|
| 19 | 19 | Dismantling posts or struts (wood, steel or R.C.C.) any section, embedded in natural ground including taking out embedded portion and making good disturbed ground complete all as specified and directed.\n | | 803 | RM |
|---|
| 20 | 20 | M&L PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete including demolition complete all as specified and directed.\n | | 27 | Cum |
|---|
| 21 | 21 | M&L for mild steel work in hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc,) and including all necessary drilling, bolting or riveting, etc, and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.\n\n | | 5550 | Kg |
|---|
| 22 | 22 | S&F mild steel screw bolts diameter of neck 11 to 15 mm (machine made) with hexoganal or square heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut, exc. 10 cm but not exc. 15 cm long complete all as specified and directed.\n | | 50 | Kg |
|---|
| 23 | 23 | Supply only chain link MS galvanized fencing, any size or type complete all as specified and directed.\n | | 2850 | Kg |
|---|
| 24 | 24 | Fixing only chain link fencing including line wires, any mesh, size and type of standards, rails, straining bolts, etc, and including provision of binding wire complete all as specified and directed.\n | | 1188 | Sqm |
|---|
| 25 | 25 | Dismantling steel barbed wire fencing of any dia and type fixed in any position (Each line of wire to be measured) complete all as specified and directed.\n | | 1 | 100 RM |
|---|
| 26 | 26 | S&F galvanised. 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc, complete all as as specified and directed (each line wire to be measured).\n | | 44 | 100 RM |
|---|
| 27 | 27 | Excavation in post holes (or similar holes) each not exceeding 0.5 cum, getting out, returning filling in and ramming earth in layers not exceeding 25 cm thick, watering and removing surplus soil to a distance not exceeding 50m and making good in soft/loose soil complete all as specified and directed.\n | | 250 | Each |
|---|
| 28 | 28 | M&L preparation of new steel surfaces of any description not exceeding 10 cm width or girth when unconnected with other painting or when painted in a different tint and including applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.\nMake :- Jotun India Pvt Ltd / Apcolite (Asian) / Luxol (Berger) / Jenson & Nicholson Paints Ltd (Borolac) / Shalimar Paints Ltd (Superlac)\n | | 157 | 10 RM |
|---|
| 29 | 29 | S&F in repairs concertina coil razor blade type, fixed with galvanissed 'J' clips, of following specification :-\n(a) Dia of coil spiral / loop - 600 mm\n(b) No of spirals / loops per bundle of coil- 50\n(c) Weight of each bundle of coil - 8 Kg (minimum)\n(d) Coverage of wall / fence per bundle of coil - 6 m\n(e) Central core wire made from high tensile spring steel wire (conforming to IS:4454) of dia 2.50 mm, UTS 1600 N/Sqmm (minimum), duly hot dipped galvanised (conforming to IS-2629) zinc coating 230gm /sqm (minimum)\n(f) Razorblade : Electro galvanized steel razorblades of length 11.50 mm, width 19 mm & thickness 0.50 mm, conforming to IS - 1573, zinc coating 120 gm/sqm , pitch of barbs 25.00 mm\n(g) Handle, clips (minimum 5 clips per 2 spiral) and spikes to be provided as required complete\n\n | | 158 | RM |
|---|
