Defence Statutory Bodies & Commissions/Committees Closing in 0 days TDR #28487820

Provision Of Sainik Institute At Patiala

Issued by Statutory Bodies & Commissions/Committees · PATIALA, Punjab
Tender Value
3.75 Crore
Estimated cost
Bid Submission
18 Sep 2021
0 days left
EMD
4.50 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
PATIALA → Punjab
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Provision Of Sainik Institute At Patiala - 1 Total Amount Of Sch A Sec-I ( Building Works ) Lump Sum Price Worked Out By The Contractor For Building Works As Listed In Schedule A Part-I 2 Total Amount Of Sch A Sec Ii ( Site Clearance & Earth Works ) Lump Sum Price Worked Out By The Contractor For Site Clearance & Earth Works As Listed In Schedule A Part-Ii 3 Total Amount Of Sch A Sec Iii ( Internal Electrification Works ) Lump Sum Price Worked Out By The Contractor For Building Works As Listed In Schedule A Part-Iii 4 Total Amount Of Sch A Sec Iv ( Internal Water Supply Works ) Lump Sum Price Worked Out By The Contractor For Internal Water Supply Works As Listed In Schedule A Part-Iv 5 Total Amount Of Sch A Sec V ( Sewage Disposal Works ) Lump Sum Price Worked Out By The Contractor For Sewage Disposal Works As Listed In Schedule A Part-V 6 Total Amount Of Sch A Sec Vi ( Area Drainage Works ) Lump Sum Price Worked Out By The Contractor For Area Drainage Works As Listed In Schedule A Part-Vi 7 Total Amount Of Sch A Sec Vii ( Road / Path / Culvert Works ) Lump Sum Price Worked Out By The Contractor For Road / Path / Culvert Works As Listed In Schedule A Part-Vii 8 Total Amount Of Sch A Sec Viii ( Security Wall / Fencing Works ) Lump Sum Price Worked Out By The Contractor For Security Wall / Fencing Works As Listed In Schedule A Part-Viii 9 Total Amount Of Sch A Sec Ix ( External Electrification Works ) Lump Sum Price Worked Out By The Contractor For External Electrification Works As Listed In Schedule A Part-Ix. 10 Total Amount Of Sch A Sec X ( External Water Supply Works ) Lump Sum Price Worked Out By The Contractor For External Water Supply Works As Listed In Schedule A Part-X. 11 Total Amount Of Sch A Sec Xi ( Summer Appliances Works ) Lump Sum Price Worked Out By The Contractor For Summer Appliances Works As Listed In Schedule A Part-Xi. 12 Total Amount Of Sch A Sec Xii ( Open Platform Works ) Lump Sum Price Worked Out By The Contractor For Open Platform Works As Listed In Schedule A Part-Xiii. 13 Schedule Asection-Xiii ( Misc Items Of Works ) Note : This Schedule Is Not Pre-Priced By Mes And The Pre-Priced Rate Indicated As Rs 0.00 Under Col. 5 Siginifies This Fact Only. 14 Internal Electric Supply Works 15 Item No. 1 :M& L Point Wiring Complete With 1.5 Sqmm ( Nominal Area ) Pvc Insulated Unsheathed Multistranded Copper Condutor Single Core Cable 1100 Volts Grade Frlsh Isi Marked Drawn Through And Including Heavy Duty Non Metalic Pvc Conduit, Isi Marked Of Not Less Than 20 Mm Dia, Concealed In Wall, Roof, Etc, With All Connected Fittings, Etc. Suitable For Mounting Modular Switches, Sockets Etc And Including Frlsh Pvc Insulated Unsheathed Multistranded Single Core Copper Conductor Cable Of Size 1.5 Sq Mm Green In Colour As In Earth Continuity Conductor Connected To Common Earth Dolly And All Metal Parts Of Fittings As Specified And Directed For The Following:- Nnote:- Switches , Sockets, Ceiling Rose, Regulators, Modular Metal Boxes, Cover Plate Etc Shall Be Measured And Paid Separately. 16 ( A ) One Light / Fan / Bell Point Controlled By One Switch 17 ( B ) One 5 Pin Socket Outlet Independent 5 / 6 Amps 18 ( C ) One Socket Outlet 5 / 6 Amps On The Same Board With Other Switches. 19 ( D ) One 6 Pin 6 / 16 Amps Socket Outlet Independent With 2.5 Sqmm Size Copper Conductor Cable And 1.5 Sqmm Copper Cables As Earth Wire. 20 Item No 2: M& L Point Wiring Complete With 2.5 Sqmm ( Nominal Area ) Pvc Insulated Unsheathed Multistranded Copper Condutor Single Core Cable 1100 Volts Grade Frlsh Isi Marked Drawn Through And Including Heavy Duty Non Metalic Pvc Conduit, Isi Marked Of Not Less Than 20 Mm Dia, Concealed In Wall, Roof, Etc, Two Light Controlled By One Switch With All Connected Fittings, Suitable For Mounting Modular Switches, Sockets Etc And Including Frlsh Pvc Insulated Unsheathed Multistranded Single Core Copper Conductor Cable Of Size 2.5 Sq Mm Green In Colour As In Earth Continuity Conductor Connected To Common Earth Dolly And All Metal Parts Of Fittings As Specified And Directed. Nnote:- Switches , Sockets, Ceiling Rose, Regulators Mosular Metal Boxes, Cover Plates Etc Shall Be Measured And Paid Separately. 21 Item No 3: S&F White Cover Plate With Frame 12 Module 240 Volts Andcomplete All As Specified And Directed By The Engr-In-Charge. 22 Item No 4: S&F Modular Metal Box 8 Module And Complete All As Specified And Directed By The Engr-In-Charge. 23 Item No 5: S&F Modular Metal Box 12 Module And Complete All As Specified And Directed By The Engr-In-Charge. 24 Item No 6: Supply And Fixing Modular Angle Holder Cat Pat No 33958 Of Anchor Or Equivalent Makes With Insulated Body With Back Plate For Led Lamps All As Specified And Directed By The Engr-In-Charge. 25 Item No 7: Supply And Fixing Led Downlighter 9 Watt, Retrofit All As Specified And Directed By Engr-In-Charge. 26 Item No 8: S&F Led Tube Light Fittings 1 X 18 W, 230V, Complete With All Accessories Internally Prewired And Including Connecting Up With Twisted Flexible Pvc Copper Conductor Cable Of 23 / 0.0076 From Ceiling Rose All As Directed By Engr-In- Charge. 27 Item No. 9: S&F Of Double Door Three Phase Distribution Board 6 Way Made Out Of Crca Sheets 1.6 Mm Thick, Phosphatised Powder Coated With Copper Bus Bar 200 Amps, 415 V, Earth Stud, Din Rail, Polymide Terminal Blocks For Incoming And Outgoing Circuits, Inbuilt Loose Wire Box , Ground Terminal Blocks , Duly Wired With Thimbled Flame Retardant Copper Conductors And Poly Layer For Protection In All As Specified And Directed. ( Note:- Single Phase Mcbs Are To Be Measured And Paid For Seperately ) N 28 Item No. 10: S&F Sheet Metal Enclosure Mccb Tpn Distribution Board, Double Door, Ip 43 Class, Including Suitable Size Copper Bus-Bar, 415V, 4 Way With Shrouded Neutral Bar, Earth Bar And Incld. Cable Ties And Suitable Size Blanks, Including Taking Down Of Existing Sheet Metal Enclosure Complete All As Specified And Directed. 29 Item No. 11: Supply And Fixing In Replacement Isolator 40 Amps, 10 Ka, C Series 240 V Isi Marked Complete All As Specified And Directed By Engr-In-Charge. 30 Item No. 12: S&F For Flush Fixing Of Sheet Metal Enclosure Mcb Spn Distribution Board, Double Door, Ip 43 Class, Including Suitable Size Copper Bus-Bar, 240V, 12 Way With Shrouded Neutral Bar, Earth Bar And Incld. Cable Ties And Suitable Size Blanks, Including Taking Down Of Existing Sheet Metal Enclosure Complete All As Specified And Directed. N 31 Item No. 13: S&F For Flush Fixing Of Sheet Metal Enclosure Mcb Spn Distribution Board, Double Door, Ip 43 Class, Including Suitable Size Copper Bus-Bar, 240V, 6 Way With Shrouded Neutral Bar, Earth Bar And Incld. Cable Ties And Suitable Size Blanks, Including Taking Down Of Existing Sheet Metal Enclosure Complete All As Specified And Directed. N 32 Item No. 14 : Supply And Fixing Mcb Tpn 63 Amps, 10 Ka C Series 240 V Isi Marked.Complete All As Specified And Directed By Engr-In-Charge. 33 Item No 15: Supply And Fixing Thermal Magnetic Adjustable Type Mccb 125 Amps , 16 Ka, C Series 415. V Isi Marked.Complete All As Specified And Directed By Engr-In-Charge. 34 Item No 16 : Supply And Fixing Cable Pvc, 2 Single Core 2.5 Sq Mm Stranded Aluminium Conductor, 1100 Volts Grade Heavy Duty Unarmoured 35 Item No 17 : Supply And Fixing Mirror Light Fitting Led 10W, 230 V, 2Ft All As Per Crompton Make Cat No. - Lcl-14-Cdl Or Equivalent Makes Mentioned In Tender Documents, Complete All As Specified And Directed By Engr-In-Charge. 36 Item No 18 : S&F Led Building Security Light, Pressure Die Cast Aluminum Housing, 25 Watts Capacity, 240V, Ip 65 Class, With Suitable In-Built Electronic Driver Complete Incld. Fixed On A Bracket Made Out Of 1.5 Mtr Long Med Grade Gi Pipe 40 Mm Dia Bend To Shape As Directed Fitted On Wall At A Height Not Less Than 6 Mtr From Ground With Ms Clamp, Nuts And Bolts And Washers As Required At Site And Incld. Connecting Luminarie To The Nearest Ceiling Rose / Junction Box With 1.5 Sqmm Pvc Insulated 3 Core Wire Complete All As Directed And Specified By Engr-In-Charge Of Make Crompton Greaves Or Equivalent In Philips / Wipro. Note - Cost Of All Minor Spares And Jobs Required For Fixing Of Light Fixture On Wall And For Electrical Connections Are Deemed To Be Included In The Quoted Rate. 37 Item No 19 : Suppy And Fixing Exhaust Fan Heavy Duty With Louvers Of Size 380Mm Sweep, 900 Rpm 230 Volts Single Phase Ac Supply Complete With, Bolt, Nuts And Washers, Suitably Embedded In The Wall Including Making Suitable Opening And Provisioning Of Flexible Cord Copper Of Size 23 / 0.0076 From Ceiling Rose To Exhaust Fan For Giving Connection Complete All As Specified And Directed By Engineer-In-Charge. 38 Item No 20 : Supply Only Sheet Metal Enclosure With Socket Plug Top And Mcb Sp Cap 20 Amps With A 2 Pin, Earth Plug And Socket Complete All As Specified And Directed By Engr-In-Charge. 39 Item No 21 : Supply And Fixing In Light Fitting Led Panel 25 W, 230 V, Round Type Surface Mounted, Injection Molded In Thermally Conductive Engineered Plastic-Fr V0 Grade Housing, Diffuser With High Optically Efficient Material All As Per Crompton Cat Part No.:- Lcrp-20-Cdl Or Equivalent Model Of Makes Mentioned In Tender Documents, Complete All As Specified And Directed By Engr-In-Charge. 40 Item No 22 : Supply And Fixing In Light Fitting Led Panel 36 W, 230 V, Round Type Surface Mounted, Injection Molded In Thermally Conductive Engineered Plastic-Fr V0 Grade Housing, Diffuser With High Optically Efficient Material All As Per Crompton Cat No.:- Lcrp-20-Cdl Make Or Equivalent Or Equivalent Makes Mentioned In Tender Documents, Complete All As Specified And Directed By Engr-In-Charge. 41 Item No 23 : Supply And Fixing Of 100W Led Flood Light With System Lumen Efficacy=100 Lm / W Operating Voltage Between 140-270Vac, Driver Will Comply For 440Vac Operation ( Will Sustain For 4 - 6 Hrs Continuously ) , Driver Will Have Cut Off At > 300 Vac, Power Factor More Than 0.95%, Led Cct 5665±355K As Per Ansi Bin, Led Driving Current < 70% Of Rated Maximum Forward Current, Luminaire Intergal Driver With 5Kv Surge Protection, Over Load Protection, No Load Protection And Bis Marking ( R No. For Driver ) , Driver Certiifcation Iec64347-2-13 Is ( 15885 ) , Driver Should Be Concealed Under Ip66, Over All Electrical Efficency More Than 90%, Driver Electrical Efficiency Will Be > 85% Connecting With Pvc Copper Cable Of Size 3X1 Sqmm As Per Is 10322 At Complete All As Specified And Directed. 42 Item No 24 : Supply And Fixing Of 60W Led High Bay Light With Surface Mounted Device ( Smd ) With Multiple Led With Borosilicate Glass Lens And Acrylic, With Aluminum Reflector, Operating Voltage Between 140-270Vac, Power Factor More Than 0.95%, Intergal Driver With 5Kv Surge Protection Differential Mode / Coman Mode , Led Cct 5665±355K As Per Ansi Bin, Over Load Protection, No Load Protection, Driver Should Be Concealed Under Ip66 And Bis Marking ( R No. For Driver ) , Driver Certiifcation Iec64347-2-13 Is ( 15885 ) , System Lumen >15000, Cri>70, Over All Electrical Efficency More Than 90%, Connecting With Pvc Copper Cable Of Size 3X1 Sqmm Complete All As Specified And Directed. 43 Item No 25 : Supply, Installation, Connecting And Testing Of Ceiling Fan Electric Single Phase 230 Volts Ac Of Sweep 1200Mm Having Service Value More Than 4, Complete With Mounting Arrangment In Ceiling Such As Down Rod 600Mm, Hooks, Clamps, Nuts, Bolts And Washers Etc Complete All As Specified And Directed. 44 Item No 26 : Material And Labour For Ceiling Rose Surface Type, 65Mm X 50Mm Two To Three Terminals / Pvc / Polycarbonate, Isolated Body Fixed On Pvc Block Complete All As Specified And Directed. 45 Item No 27 : Supply And Fix Of Mcb Sp 6-32 Amp 230V Complete All As Specified And Directed. 46 Item No 28 : Material And Labour For Call Bell Ding Dong Ac 230 Volt Single Pole Complete All As Specified And Directed. 47 Item No 29 : Supply And Fix Environmental Friendly, Ultra Modern, Energy Saving, Surface Mounted, Decorative Stud Bulk Head Edge-Lit Led Luminaire Comprising Of High Brightness Leds Of Capacity 10 Watts Complete All As Specified And Directed. 48 Road, Path & Culverts 49 Item No 30 : Delinators Of Size 700X100x50mm Of Abs Round Body Fixed With 100Mm Dia Highly Reflective Reflector, Duly Uv Stablized, In Yellow Colour Complete All As Specified. 50 Item No. 31: Cat Eye Two Way Reflective Of Size 100 X 100 X 18.5Mm With Pvc Body With Reflective Panels Amber / Red / White Complete All As Specified And Directed. 51 Item No. 32: Supply Only Sand For Sand Cusioning Under Interlocking Paver Block Complete All As Specified And Directed. 52 Item No. 33 : M&L Bringing Approved Earth From Outside Md Land Including Cost Of Earth & Carriage Complete All As Specified And Directed. 53 Item No. 34 :Painting Lines, Dashes, Arrows, Letters Etc On Road Pavement And The Like Not Exceeding 10 Cm Wide With Thermo Plastic Paint . 54 Item No. 35 :Painting Lines, Dashes, Arrows, Letters Etc On Road Pavement And The Like Exceeding 10 Cm Wide With Thermo Plastic Paint. 55 Item No.36 : Providing, Laying, Compaction Of Granular Sub-Base By Providing Close Graded Material Conforming To Specifications I.E Grading Ii, Conforming To Clause 401 Of Mort&H Specifications For Road And Bridge Works ( Fifth Revision ) , Mixing In A Mechanical Mix Plant At Omc, Carriage Of Mixed Material By Tippers To Work Site, For All Leads & Lifts, Spreading In Uniform Layers Of Specified Thickness With Motor Grader On Prepared Surface And Compacting With Vibratory Power Roller Of Capacity 8 To 12 Tonne To Achieve The Desired Density, 150 Mm Thick Compacted Thickness, Complete All As Specified And Directed By Engr-In-Charge. 56 Item No. 37 : Providing, Laying, Compaction Of Wet Mix Macadam Conforming To Clause 406 Of Mort&H Specifications For Road And Bridge Works ( Fifth Revision ) , 250 Mm Thick ( Compacted Thickness, 125 Mm Thick In Two Separate Layers ) With Mechanically Crushed Graded Stone Aggregates And Granular Material ( Size Range 53 Mm To 0.075 Mm ) , Grading Of Aggregates As Per Table 400-13 Of Mort&H Specifications For Road And Bridge Works ( Fifth Revision ) , Including Premixing The Material With Water At Omc In For All Leads & Lifts, Laying In Uniform Layers With Mechanical Paverfinisher In Sub- Base / Base Course On Well Prepared Surface And Compacting With Vibratory Roller Of 8 To 12 Tonne Capacity To Achieve The Desired Density , Required Gradient And Camber Etc., Complete All As Specified And Directed By Engineer-In-Charge. Nnotes: N1. The Wmm Shall Be Laid In Two Layers I.E Each Layer Of 125 Mm Thick ( Compacted Thickness ) . N2. For Payment Purpose, Both Layers Shall Be Considered As One Unit. 57 Item No 38 : Preparation Of Un-Surfaced Wet Mix Macadam ( Wmm ) Surfaces By Brushing With Wire Brushes For Re-Moving Caked Mud , Dust, Loose Material, Foreign Material Etc., Sweeping With Power Brooms And Finally Fanning The Cleaned Surface With Air Compressors To Remove All Loose Dirt Etc. And Applying Evenly A Priming Coat On Un-Surfaced Wet Mix Macadam Surfaces Conforming To Clause 502 Of Mort&H Specifications For Road And Bridge Works ( Fifth Revision ) , With Cationic Bituminous Emulsion Ss1 Grade, Confirming To Is 8887 ( Latest Edition ) @ 7.5 Kg Per 10 Sq Metres Using Primer Distributor Which Shall Be Self-Propelled Or Towed Bitumen Pressure Sprayer Complete All As Specified And Directed By Engineer-In-Charge. N 58 Item No. 39 : Providing, Laying & Compaction Of Bituminous Macadam ( Bm ) 50 Mm Compacted Thickness Conforming To Clause 504 Of Mort&H Specifications For Road And Bridge Works ( Fifth Revision ) , Using Mechanically Crushed Stone Aggregates And Granual Material Etc. Of Grading Ii As Per Table 500-7 Of Mort&H Specifications For Road And Bridge Works ( Fifth Revision ) , Premixed With Bituminous Binder, Bitumen Grade Vg-30 @ 3.50% ( Percentage By Weight Of Total Mix ) Prepared In Batch Type Hot Mix Plant Of 100-120 Tph Capacity Transported To Site By Tippers, Laid Over A Previously Prepared Surface With Paver Finisher Equiped With Electronic Sensor To The Required Grade, Level And Alignment And Rolling With Smooth Wheeled, Vibratory And Tandem Rollers As Per Specifications To Achieve The Desired Compaction And Density Complete All As Specified And Directed By Engineer-In-Charge. Nnotes : ( I ) The Contractor Shall Quote The Rate Against Item Considering 3.5% Vg-30 Bitumen Content. Job Mix Formula As Per Mort&H Specifications For Road And Bridge Work ( Fifth Revision ) For Bituminous Concrete Shall Be Got Designed From Nit / Ctl / Govt Engg College And Shall Be Got Approved From Ge In Writing Well Before Commencement Of Work Without Any Financial Effect To The Department. Also The Bitumen Content Shall Not Be Less 3.4% By Weight Of Total Mix As Per Clause 504.2.4 Of Mort&H Specifications ( Fifth Revision ) . N ( Ii ) If Qty Of Binder Contents Is Less Than The Qty As Specified In Respective Items Of Boq, It Shall Be Adjusted At Supply Only Rates Of Paving Bitumen @ Rs 45.00 Per Kg And If Qty Of Binder Contents Is More Than The Qty As Specified In Respective Items Of Boq No Adjustment Shall Be Made. 59 Item No. 40 : Preparation Of Surfaces And Applying Evenly A Tack Coat Conforming To Clause 503 Of Mort&H Specifications For Road And Bridge Works ( Fifth Revision ) , With Cationic Bituminous Emulsion Rs1 Grade, Confirming To Is 8887 ( Latest Edition ) @ 2.5 Kg Per 10 Sq Metres Using Using Primer Distributor Which Shall Be Self-Propelled Or Towed Bitumen Pressure Sprayer Complete All As Specified And Directed By Engineer-In-Charge. N 60 Item No. 41 : Preparation Of Existing Black Top Surfaces And Applying Evenly A Tack Coat Conforming To Clause 503 Of Mort&H Specifications For Road And Bridge Works ( Fifth Revision ) , With Cationic Bituminous Emulsion Rs1 Grade, Confirming To Is 8887 ( Latest Edition ) @ 2.5 Kg Per 10 Sq Metres Using Using Primer Distributor Which Shall Be Self-Propelled Or Towed Bitumen Pressure Sprayer Complete All As Specified And Directed By Engineer-In-Charge. 61 Item No. 42 : Providing And Laying 30 Mm Thick ( Consolidated Thickness ) Bituminous Concrete ( Bc ) Layer Conforming To Clause 507 Of Mort&H Specifications For Road And Bridge Work ( Fifth Revision ) Including Cost Of Coarse Aggregates, Fine Aggregates, Filler, 5.5% Binder ( Paving Bitumen Grade Vg-30 ) Content By Weight Of Total Mix And Crushed Aggregates Of Grading 2, Anti Stripping Agent, Warm Mix Additives ( Quantity, Quality And Grade As Per The Approved Job Mix Formula ) Etc, Cleaning And Pre-Heating Of The Mineral Aggregate, Filler & Bitumen To The Specific Temperature, Thoroughly Mixing With Binder Of Specified Bitumen Content, Anti Stripping Agent, Warm Mix Additives As Per Mix Design In Hot Mix Plant Of 100-120 Tph Capacity, Carrying The Hot Mixed Materials By Means Of Tipper, Trucks, Or Any Other Approved And Suitable Arrangements, Laying The Hot Premixed Materials Over The Prepared Surface By Means Of Paver Finisher Including Manual Operation As And When Required For Proper Grade, Level And Camber Thorough Rolling With Power Roller 8 To 12 Tonnes Smooth Wheeled, Vibratory And Tandem Roller With Necessary Hand Packing And Pinning To Give An Even Surface, Including Running Expense Of All Plants And Machineries, Inclusive Of Proper Traffic Control During Laying To The Satisfaction Of Engineer-In-Charge, Required Quality Control Tests At Required Interval Etc Complete In All Respects Complete All As Specified And Directed By Engr-In-Charge. N N N 62 ( Item No 42 Contd..... ) Notes : ( I ) The Contractor Shall Quote The Rate Against Item Considering 5.5% Vg-30 Bitumen Content. Job Mix Formula As Per Clause No 505.3.3 Of Mort&H Specifications For Road And Bridge Work ( Fifth Revision ) For Bituminous Concrete Shall Be Got Designed From Nit / Ctl / Govt Engg College And Shall Be Got Approved From Ge In Writing Well Before Commencement Of Work Without Any Financial Effect To The Department. Also The Bitumen Content Shall Not Be Less 5.4% By Weight Of Total Mix As Per Clause 507.2.5 Of Mort&H Specifications ( Fifth Revision ) . N ( Ii ) The Cost Of Materials, Transportation, Job Mix Formula From Lab And Testing Charges For Various Tests As Required Are Included In The Unit Rate Quoted By The Contractor. N ( Iii ) Cost Of Filler I.E Rock Dust, Hydrated Lime Or Cement Is Deemed To Be Included In Unit Rate. N ( Iv ) If Qty Of Binder Contents Is Less Than The Qty As Specified In Respective Items Of Boq, It Shall Be Adjusted At Supply Only Rates Of Paving Bitumen @ Rs 45.00 Per Kg And If Qty Of Binder Contents Is More Than The Qty As Specified In Respective Items Of Boq No Adjustment Shall Be Made. N ( V ) After Spreading Of Mix As Per Clause 507.4.7 Of Mort&H Specifications Entire Surface During The Operation Shall Be Rolled With Road Roller 8-10 Tonnes ( Smooth Wheeled ) Followed With Vibratory Road Roller Of 8 -10 Tonnes Static Weight, Followed By Finish Rolling With 6 To 8 Tonnes Smoooth Wheeled Tandem Roller As Per Clause No 507.4.8 Of Mort&H Specifications ( Fifth Revision ) And The Cost Of The Same Shall Be Deemed To Be Included In The Quoted Rate. N N 63 Air Conditioning 64 Item No. 43: Supply, Install, Testing And Commissioning Of Install Air Cooled Spilt Type Air Conditioners Electric Driven ( 240 Volts, Single Phase, 50 Hz Supply ) With Energy Efficient Scroll Compressor, Working On R-134 A Or Superior Environment-Friendly Refrigerant, Cordless Remote Operated, Comprising Of Indoor Unit, Wall Mounted, Material Of Construction Of Indoor Unit Abs, Power Consumption ( Max ) 4000 Watts, Outdoor Unit, Powder Coated, Integral Refregerant Piping, Electric Connection ( Between Indoor And Outdoor Unit Located Up To A Maximum Distance Of 10 Meters ) And Condensate Water Drainage Arrangement Etc Pressore Testing, Leak Testing, Vaccumisation, R 134A Gas Charging, Shifting Of Indoor And Outdoor Unit, Mounting Arrangement Of Indoor Unit With Anchor Fastner, Support Rod, Vibration Isolators Complete Of Following Capacity Or Nearest Higher Standard Size Complete Of Following Capacity:- 4500 K Cal Per Hour ( 1.5 Ton ) .Bee 5 Star Rated Complete All As Specified & Directed. 65 Item No:44 : Supply, Install, Testing And Commissioning Of Install Air Cooled Spilt Type Air Conditioners Electric Driven ( 240 Volts, Single Phase, 50 Hz Supply ) With Energy Efficient Scroll Compressor, Working On R-34A Or Superior Environment-Friendly Refrigerant, Cordless Remote Operated, Comprising Of Indoor Unit, Wall Mounted, Material Of Construction Of Indoor Unit Abs, Power Consumption ( Max ) 4000 Watts, Outdoor Unit, Powder Coated, Integral Refregerant Piping, Electric Connection ( Between Indoor And Outdoor Unit Located Up To A Maximum Distance Of 10 Meters ) And Condensate Water Drainage Arrangement Etc Pressore Testing, Leak Testing, Vaccumisation, R-134A Gas Charging, Shifting Of Indoor And Outdoor Unit, Mounting Arrangement Of Indoor Unit With Anchor Fastner, Support Rod, Vibration Isolators Complete Of Following Capacity Or Nearest Higher Standard Size Complete Of Following Capacity 6000 K Cal Per Hour ( 2 Ton ) .Bee 3 Star Rated All As Specified And Directred By Eng-In-Charge. 66 Item No 45 Voltage Stabilizer For Automatic Operation, Single Phase Naturally Air Cooled Indoor Type & Designed For Input Variation Between 170 V To 250 V With Output Voltage Stablilized At 230 V With Accuracy Of 2.5% And Of Following Capacity Complete All As Specified & Directed. 67 ( A ) 4.0 Kva 68 ( A ) 5.0 Kva 69 Summer Appliances 70 Item No. 46 : Supply And Installation Of Desert Cooler With Outer Body Made Of Pgi ( Plain Galvanised Iron ) Sheet Not Less Than 1.20 Mm Thickness For Fixed Part , Thickness Of Pgi Sheet For Shutter Not Less Than 0.80 Mm Thick, Front Grill Made Of Pgi Sheet With Minimum Weight 2.80 Kgs. Overall Outer Size Not Less Than 66 Cm X 66 Cm X 99 Cm ( Height ) , Electric Driven Copper Wounded Fan Motor Having Nominal Air Flow Capacity 4000 Cum Per Hour And Submersible Pump For Required Flow Of Water ( Sigle Phase ) , Complete All As Specified & Directed. 71 Item No. 47: Voltage Stabilizer For Automatic Operation, Single Phase Naturally Air Cooled Indoor Type & Designed For Input Variation Between 170 V To 250 V With Output Voltage Stablilized At 230 V With Accuracy Of 2.5% And Of Capacity 2 Kva Complete All As Specified & Directed. 72 Item No. 48: Supply And Installed Regrigerators, Electric Driven ( Single Phase ) , Capacity 215 Litres Frost Free Complete All As Specified & Directed. 73 Item No. 49 : Supply And Installed Deep Freezer Hard Top 320 Ltrs Capacity Having Double Door Complete All As Specified And Directed By Eic 74 Item No.50 : M&L For Heavy Duty Pvc Stands For Placing / Staging Of Water Coolers And Refrigirators Of Proper Sizes Complete All As Specified & Directed. 75 Item No. 51 : Supply And Installed Desert Cooler Electric Driven ( Single Phase ) , Having Nominal Air Flow Capcity Of 4000 Cum Per Hour Complete All As Specified & Directed.. 76 External Electrification 77 Item No.52 : Supply And Laying Sub Class ‘B’ Old Size Bricks Laid Adjacent To Each Other Perpendicular To The Direction Of Cable In Trenches For Protection Of Cable All As Specified And Directed. 78 Item No. 53 : Earthing Complete With Galvanised Steel Earth Plate Electrode, 40Mm Bore, Medium Grade, 2.5 Metres Length, Buried Directly And Preferably Vertically In Ground With Top Edge Not Less Than 1.25 Metre Below Ground Level Connected With Earthing 32 X 6 Mm Strip Galvanised Iron Of Earthinglead All As Shown In Plate No. 02 To The Earthing Test Point All As Specified And Indicted Including Testing On Completion Complete All As Directed. ( Cost Of 7.5Mm Length Of Gi Protection Pipe Shall Be Included In The Rate Of Thid Item. 79 Item No. 54 : M&L For Ms Junction Box Made Out Of 2 Mm Thick Sheet Of Size 300Mm X 250Mm X200 Mm Including Aluminium Busbar Single Phase With Neutral Of 63 Amp Capacity With , Mcb Sp 10 Amp - 01 Nos For Incoming And Out Going Connections Including Necessary Welding Work, Clamps And Mounting On Poles Etc Complete All As Specefied And Directed. 80 Item No. 55 : S&F Led Street Light Ip 66 Powder Coated Pressure Die Cast Aluminium Compact High Power Led Street Light Fitting 25 Watts With Heat Resistant Toughned Glass Complete With All Accessoreis Watts. Make: Polycabpub05007 Or Equivalent Or Equivalent Makes Mentioned In Tender Documents Complete All As Specefied And Directed. 81 Item No. 56 : S & F Brackets For Street Light Lumanaries 40 Mm Light Grade Gi Pipe With 2 Nos Clamps Etc Length Of Gi Pipe Not More Than 1.5 Metre Length. ( For Fixing On Poles ) 82 Item No. 57 : Supply, Levelling And Well Ramming Sand Cushioning In Trenches For Cable Protection Complete All As Speified And As Directed. Note : Thickness Of Sand Cushioning After Punning Down Shall Be Measured For Payment Purpose. 83 Item No. 48 : Item No.6 : Cable ( With Approved Colour Coding As Per Is ) With Single Core Frls Pvc Insulated Flexible Multistranded Copper Conductor 1.1 Kv Grade For Security Light Fitting ( Main Cable : Number Of Runs Indicated Below ) Along With One Run Of Single Core Frls Pvc Insulated Flexible Multistranded Copper Conductor 1.1 Kv Grade For Earthing In And Including Pvc Conduits Of Suitable Size, For 2 Runs Of 2.5 Sqmm Main Cable + 1 Run Of 1.5 Sqmm. 84 Item No.58 : Cable ( With Approved Colour Coading As Per Is ) With Single Core Frls Pvc Insulated Flexible Multistranded Copper Conductor 1.1 Kv Grade For Security Light Fitting ( Main Cable : Number Of Runs Indicated Below ) Along With One Run Of Single Core Frls Pvc Insulated Flexible Multistranded Copper Conductor 1.1 Kv Grade For Earthing In And Including Pvc Conduits Of Suitable Size, For 2 Runs Of 2.5 Sqmm Main Cable + 1 Run Of 1.5 Sqmm. 85 Item No. 59 : Supply , Installation, Commissionning And Testing Of Out Door Lt Panel Board Made Out Of Crca Sheet 3.15 Mm Thick Vermin Proof Factory Made With Angle And Aluminium Bus Bar Of Capacity 200 Amps For 3 Phase And Neutral With Nessary Angle Iron 50 X 6 Mm Support Frame Including Two Coats Powder Painting Over A Coat Of Red Oxide Primer And Grout In Pcc Complete All As Specified And Directed Comprising Of The Following :- Nincoming N ( A ) Aluminium Bus Bar Of Capacity 200 Amps For 3 Phase With Neutral - One Job N ( B ) Mccb 415 V, 100 A, 4 Pole With Over Load , Short Circuit And Earth Fault Protection With Earth Module Breaking Capacity 25 Ka- 01 Nos. N ( C ) Digital Votl Meter 0-500 Volts Square Flush Mounted With Inbuild Selector Switch -01 Nos. N ( D ) Digital Ampere Meter Square Flush Mounted With Inbuild Selector Switch -01 Nos N ( E ) Indicator Lamps Ryb Led Type - 01 Set Of Three. ( E ) Ct Coils 100 / 5 A-03 Nos. Nout Going N ( A ) Mccb 63 A, 415V , 3 Pole With Over Load Short Circuit Protection, Breaking Capacity 16 Ka - 03 Nos ( 2+1 ) N ( B ) Mcb 20 A, 230V , 2 Pole With Over Load Short Circuit Protection, Breaking Capacity 10 Ka - 01 Nos N Nnote :- ( I ) All Mccbs / Instruments / Mcbs / Bus Bar Shall Be Housed In A Separate Housing With On- Off Latches In The Housing. ( Location Sainik Institute ) 86 External Water Supply 87 Item No. 60 : M & L For Cutting Of Exiting 150 Mm Dia Ci / Di / Gi Pipe Line And Including Insert T Of 50 Mm Dia Branch Pipe Including Complete Earth Work End Joint As Specified & Directed. 88 Item No. 61 : M&L For Construction Of Brick Masonry Valve Pit Of Size 900 X 900 X 900 Mm ( Internal Dimension ) One Brick Thick Wall In Cm 1:4 On 100Mm Thick Pcc 1:4:8 Type D-2 ( 40Mm Graded Aggregate ) As In Foundation, And 15Mm Thick Rendering In Cement Mortar ( 1:4 ) Internally, Externally Up To 15Cm Below Gl, Providing Valve Pit Cover Made Of 3Mm Thick Ms Sheet / Plate, Welded Including Provision Of Hinges, Handle And Locking Arrangement Including 40 X 40 X 6Mm Angle Iron Frame Fixed On Top Of Valve Pit By Means Of Hold Fast 150Mm Long, Embedded In Pcc Block 1:2:4 Type B-1 ( 20Mm Graded Aggregate ) Of Size 230 X 200 X 100Mm, Including Two Coats Of Anti-Corrosive Paint Over A Coat Of Red Oxide Zinc Chrome Primer And Necessary Earth Work In Soft / Loose Soil Complete All As Specified & Directed.

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 14-Aug-2021 POSTPONE CRITICAL DATES Date 01-Sep-2021
2 24-Aug-2021 Revised amended drawing_8 Other 01-Sep-2021
3 24-Aug-2021 Revised amended drawings_7 Other 01-Sep-2021
4 24-Aug-2021 Revised amended drawings_6 Other 01-Sep-2021
5 24-Aug-2021 Revsied amended drawing_5 Other 01-Sep-2021
6 24-Aug-2021 Revised amended drawing_4 Other 01-Sep-2021
7 24-Aug-2021 Revised amended drawing_3 Other 01-Sep-2021
8 24-Aug-2021 Revised amended drawing_2 Other 01-Sep-2021
9 24-Aug-2021 revised and amended drawings_1 Other 01-Sep-2021
10 24-Aug-2021 Revised amended drawings Other 01-Sep-2021
11 24-Aug-2021 Revision of BOQ alongwith amdt to contract BOQ 01-Sep-2021
12 25-Aug-2021 corrigendum 3 revision of critical dates Date 11-Sep-2021
13 02-Sep-2021 Amdt to tender Other 11-Sep-2021
14 11-Sep-2021 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 18-Sep-2021

BOQ

Name of Work: PROVN OF SAINIK INSTITUTE AT PATIALA
Sl.No.Item DescriptionItem Code / MakeQuantityUnits
11Total amount of Sch 'A' Sec-I ( BUILDING WORKS ) Lump sum price worked out by the contractor for \" BUILDING WORKS \" as listed in schedule 'A' Part-I1Lump Sum
22Total amount of Sch 'A' Sec II (SITE CLEARANCE & Earth Works) Lump sum price worked out by the contractor for \" SITE CLEARANCE & Earth Works \" as listed in schedule 'A' Part-II1Lump Sum
33Total amount of Sch 'A' Sec III ( INTERNAL ELECTRIFICATION WORKS ) Lump sum price worked out by the contractor for \" BUILDING WORKS \" as listed in schedule 'A' Part-III1Lump Sum
44Total amount of Sch 'A' Sec IV (INTERNAL WATER SUPPLY WORKS) Lump sum price worked out by the contractor for \" INTERNAL WATER SUPPLY WORKS \" as listed in schedule 'A' Part-IV1Lump Sum
55Total amount of Sch 'A' Sec V (SEWAGE DISPOSAL WORKS) Lump sum price worked out by the contractor for \" SEWAGE DISPOSAL WORKS \" as listed in schedule 'A' Part-V1Lump Sum
66Total amount of Sch 'A' Sec VI (AREA DRAINAGE WORKS) Lump sum price worked out by the contractor for \" AREA DRAINAGE WORKS \" as listed in schedule 'A' Part-VI1Lump Sum
77Total amount of Sch 'A' Sec VII (ROAD/PATH/CULVERT WORKS) Lump sum price worked out by the contractor for \" ROAD/PATH/CULVERT WORKS \" as listed in schedule 'A' Part-VII1Lump Sum
88Total amount of Sch 'A' Sec VIII (SECURITY WALL/FENCING WORKS) Lump sum price worked out by the contractor for \" SECURITY WALL/FENCING WORKS \" as listed in schedule 'A' Part-VIII1Lump Sum
99Total amount of Sch 'A' Sec IX (EXTERNAL ELECTRIFICATION WORKS) Lump sum price worked out by the contractor for \" EXTERNAL ELECTRIFICATION WORKS \" as listed in schedule 'A' Part-IX.1Lump Sum
1010Total amount of Sch 'A' Sec X (EXTERNAL WATER SUPPLY WORKS) Lump sum price worked out by the contractor for \" EXTERNAL WATER SUPPLY WORKS \" as listed in schedule 'A' Part-X.1Lump Sum
1111Total amount of Sch 'A' Sec XI (SUMMER APPLIANCES WORKS ) Lump sum price worked out by the contractor for \" SUMMER APPLIANCES WORKS \" as listed in schedule 'A' Part-XI.1Lump Sum
1212Total amount of Sch 'A' Sec XII (OPEN PLATFORM WORKS) Lump sum price worked out by the contractor for \" OPEN PLATFORM WORKS \" as listed in schedule 'A' Part-XIII.1Lump Sum
1313Schedule 'A'Section-XIII (Misc Items of Works) Note : This schedule is not pre-priced by MES and the pre-priced rate indicated as \"Rs 0.00\" under Col. 5 siginifies this fact only.
1414INTERNAL ELECTRIC SUPPLY WORKS
1515Item No. 1 :M& L Point wiring complete with 1.5 sqmm (nominal area) PVC insulated unsheathed multistranded copper condutor single core cable 1100 volts grade FRLSH ISI marked drawn through and including heavy duty non metalic PVC conduit, ISI marked of not less than 20 mm dia, concealed in wall, roof, etc, with all connected fittings, etc. suitable for mounting modular switches, sockets etc and including FRLSH PVC insulated unsheathed multistranded single core copper conductor cable of size 1.5 sq mm green in colour as in earth continuity conductor connected to common earth dolly and all metal parts of fittings as specified and directed for the following:-\nNote:- Switches , sockets, ceiling rose, regulators, modular metal boxes, cover plate etc shall be measured and paid separately.
1616(a) One light / fan / Bell point controlled by one switch157Per Point
1717(b) One 5 pin socket outlet independent 5/6 Amps25Per Point
1818(c) One socket outlet 5/6 Amps on the same board with other switches.18Per Point
1919(d) One 6 pin 6/16 Amps socket outlet independent with 2.5 Sqmm size copper conductor cable and 1.5 sqmm copper cables as earth wire.22Per Point
2020Item No 2: M& L Point wiring complete with 2.5 sqmm (nominal area) PVC insulated unsheathed multistranded copper condutor single core cable 1100 volts grade FRLSH ISI marked drawn through and including heavy duty non metalic PVC conduit, ISI marked of not less than 20 mm dia, concealed in wall, roof, etc, two light controlled by one switch with all connected fittings, suitable for mounting modular switches, sockets etc and including FRLSH PVC insulated unsheathed multistranded single core copper conductor cable of size 2.5 sq mm green in colour as in earth continuity conductor connected to common earth dolly and all metal parts of fittings as specified and directed.\nNote:- Switches , sockets, ceiling rose, regulators mosular metal boxes, cover plates etc shall be measured and paid separately.86Per Point
2121Item No 3: S&F White cover plate with frame 12 module 240 volts andcomplete all as specified and directed by the Engr-in-charge.12Each
2222Item No 4: S&F Modular Metal Box 8 module and complete all as specified and directed by the Engr-in-charge.10Each
2323Item No 5: S&F Modular Metal Box 12 module and complete all as specified and directed by the Engr-in-charge.12Each
2424Item No 6: Supply and fixing Modular Angle holder Cat Pat NO 33958 of Anchor or Equivalent makes with insulated body with back plate for LED lamps all as specified and directed by the Engr-in-charge.20Each
2525Item No 7: Supply and fixing LED downlighter 9 watt, retrofit all as specified and directed by Engr-in-charge.6Each
2626Item No 8: S&F LED tube light fittings 1 x 18 W, 230V, complete with all accessories internally prewired and including connecting up with twisted flexible PVC copper conductor cable of 23/0.0076 from ceiling rose all as directed by Engr-In- Charge.47Each
2727Item No. 9: S&F of Double door three phase distribution board 6 way made out of CRCA sheets 1.6 mm thick, phosphatised powder coated with copper Bus Bar 200 Amps, 415 V, Earth Stud, Din Rail, Polymide terminal blocks for incoming and outgoing circuits, inbuilt loose wire box ,ground terminal blocks ,duly wired with thimbled flame retardant copper conductors and poly layer for protection in all as specified and directed. (Note:- Single Phase MCBs are to be measured and paid for seperately) \n2Each
2828Item No. 10: S&F Sheet metal enclosure MCCB TPN distribution board, double door, IP 43 class, including suitable size copper bus-bar, 415V, 4 way with shrouded neutral bar, earth bar and incld. cable ties and suitable size blanks, including taking down of existing sheet metal enclosure complete all as specified and directed.8Each
2929Item No. 11: Supply and fixing in replacement isolator 40 Amps,10 KA, 'C' series 240 V ISI marked complete all as specified and directed by Engr-in-charge.2Each
3030Item No. 12: S&F for flush fixing of Sheet metal enclosure MCB SPN distribution board, double door, IP 43 class, including suitable size copper bus-bar, 240V, 12 Way with shrouded neutral bar, earth bar and incld. cable ties and suitable size blanks, including taking down of existing sheet metal enclosure complete all as specified and directed. \n1Each
3131Item No. 13: S&F for flush fixing of Sheet metal enclosure MCB SPN distribution board, double door, IP 43 class, including suitable size copper bus-bar, 240V, 6 Way with shrouded neutral bar, earth bar and incld. cable ties and suitable size blanks, including taking down of existing sheet metal enclosure complete all as specified and directed. \n1Each
3232Item No. 14 : Supply and fixing MCB TPN 63 Amps,10 KA 'C' series 240 V ISI marked.complete all as specified and directed by Engr-in-charge.20Each
3333ITEM No 15: Supply and fixing thermal magnetic adjustable type MCCB 125 Amps ,16 KA, 'C' series 415. V ISI marked.complete all as specified and directed by Engr-in-Charge.2Each
3434ITEM No 16 : Supply and fixing cable PVC, 2 single core 2.5 sq mm stranded aluminium conductor, 1100 volts grade heavy duty unarmoured150Each
3535ITEM No 17 : Supply and fixing mirror light fitting LED 10W, 230 V, 2ft all as per Crompton Make Cat No. - LCL-14-CDL or equivalent makes mentioned in tender documents, complete all as specified and directed by Engr-in-charge.2Each
3636ITEM No 18 : S&F LED building security light, pressure die cast aluminum housing, 25 watts capacity, 240V, IP 65 class, with suitable in-built electronic driver complete incld. fixed on a bracket made out of 1.5 mtr long Med grade GI pipe 40 mm dia bend to shape as directed fitted on wall at a height not less than 6 mtr from ground with MS clamp, nuts and bolts and washers as required at site and incld. connecting luminarie to the nearest ceiling rose/junction box with 1.5 sqmm PVC insulated 3 core wire complete all as directed and specified by Engr-in-Charge of make Crompton Greaves OR Equivalent in Philips/Wipro. NOTE - Cost of all minor spares and jobs required for fixing of light fixture on wall and for electrical connections are deemed to be included in the quoted rate.8Each
3737ITEM No 19 : Suppy and fixing exhaust fan Heavy Duty with louvers of size 380mm sweep, 900 RPM 230 volts single phase AC supply complete with, bolt, nuts and washers, suitably embedded in the wall including making suitable opening and provisioning of flexible cord copper of size 23/0.0076 from ceiling rose to exhaust fan for giving connection complete all as specified and directed by Engineer-in-Charge.8Each
3838ITEM No 20 : Supply only Sheet metal enclosure with socket plug top and MCB SP cap 20 Amps with a 2 pin, earth plug and socket complete all as specified and directed by Engr-in-Charge.34Each
3939ITEM No 21 : Supply and fixing in light fitting LED panel 25 W, 230 V, round type surface mounted, injection molded in thermally conductive engineered plastic-FR V0 grade housing, diffuser with high optically efficient material all as per Crompton Cat part No.:- LCRP-20-CDL or equivalent model of makes mentioned in tender documents, complete all as specified and directed by Engr-in-Charge.108Each
4040ITEM No 22 : Supply and fixing in light fitting LED panel 36 W, 230 V, round type surface mounted, injection molded in thermally conductive engineered plastic-FR V0 grade housing, diffuser with high optically efficient material all as per Crompton Cat No.:- LCRP-20-CDL Make or equivalent or equivalent makes mentioned in tender documents, complete all as specified and directed by Engr-in-Charge.24Each
4141ITEM No 23 : Supply and Fixing of 100W LED Flood Light with System Lumen Efficacy=100 Lm/W operating Voltage between 140-270Vac, Driver will comply for 440Vac operation ( will sustain for 4 - 6 hrs continuously ), Driver will have cut off at > 300 Vac, Power Factor more than 0.95%, LED CCT 5665±355K as per ANSI BIN, LED Driving Current < 70% of rated maximum forward current, Luminaire intergal driver with 5KV surge protection, Over Load Protection, No Load Protection and BIS Marking (R no. for Driver), Driver Certiifcation IEC64347-2-13 IS(15885), Driver should be concealed under IP66,Over all electrical efficency more than 90%, Driver electrical efficiency will be > 85% connecting with PVC copper cable of size 3x1 sqmm as per IS 10322 at complete all as specified and directed.4Each
4242ITEM No 24 : Supply and Fixing of 60W LED High Bay light with Surface mounted device(SMD) with multiple LED with Borosilicate glass lens and acrylic, with aluminum reflector,operating Voltage between 140-270Vac, Power Factor more than 0.95%, intergal driver with 5KV surge protection differential mode/coman mode ,LED CCT 5665±355K as per ANSI BIN, Over load protection,No load Protection, Driver should be concealed under IP66 and BIS Marking (R no. for Driver), Driver Certiifcation IEC64347-2-13 IS(15885), System Lumen >15000, CRI>70, Over all electrical efficency more than 90%,connecting with PVC copper cable of size 3x1 sqmm complete all as specified and directed.1Each
4343ITEM No 25 : Supply, installation, connecting and testing of ceiling fan electric single phase 230 volts AC of sweep 1200mm having service value more than 4, complete with mounting arrangment in ceiling such as down rod 600mm, hooks,clamps, nuts, bolts and washers etc complete all as specified and directed.62Each
4444ITEM No 26 : Material and labour for ceiling rose surface type,65mm x 50mm two to three terminals / PVC / polycarbonate, isolated body fixed on PVC block complete all as specified and directed.65Each
4545ITEM No 27 : Supply and fix of MCB SP 6-32 Amp 230V complete all as specified and directed.88Each
4646ITEM No 28 : Material and labour for call bell ding dong AC 230 volt single pole complete all as specified and directed.2Each
4747ITEM No 29 : Supply and fix environmental friendly, ultra modern,energy saving, surface mounted, decorative stud bulk head edge-lit LED luminaire comprising of high brightness LEDs of capacity 10 Watts complete all as specified and directed.40Each
4848ROAD, PATH & CULVERTS
4949ITEM No 30 : Delinators of size 700x100x50mm of ABS round body fixed with 100mm dia highly reflective reflector, duly UV stablized, in yellow colour complete all as specified.40Each
5050Item No. 31: Cat eye two way reflective of size 100 x 100 x 18.5mm with PVC body with reflective panels Amber/Red/White complete all as specified and directed.120Each
5151Item No. 32: Supply only Sand for sand cusioning under interlocking paver block complete all as specified and directed.1Cubic metre
5252Item No. 33 : M&L Bringing approved earth from outside MD land including cost of earth & carriage complete all as specified and directed.7.65Cubic metre
5353Item No. 34 :Painting lines, dashes, arrows, letters etc on road pavement and the like not exceeding 10 cm wide with Thermo Plastic Paint .70Per Ten Running metre
5454Item No. 35 :Painting lines, dashes, arrows, letters etc on road pavement and the like exceeding 10 cm wide with Thermo Plastic Paint.35Square metre
5555Item No.36 : Providing, Laying, compaction of granular sub-base by providing close graded Material conforming to specifications i.e Grading II, conforming to Clause 401 of MORT&H Specifications for Road and Bridge Works (Fifth Revision), mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller of capacity 8 to 12 tonne to achieve the desired density, 150 mm thick compacted thickness, complete all as specified and directed by Engr-in-Charge.238.5Cubic Metre
5656Item No. 37 : Providing, Laying, compaction of Wet Mix Macadam conforming to Clause 406 of MORT&H Specifications for Road and Bridge Works (Fifth Revision) , 250 mm thick (compacted thickness,125 mm thick in two separate layers) with mechanically crushed graded stone aggregates and granular material (size range 53 mm to 0.075 mm ), grading of aggregates as per Table 400-13 of MORT&H Specifications for Road and Bridge Works (Fifth Revision) ,including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paverfinisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 12 tonne capacity to achieve the desired density , required gradient and camber etc., complete all as specified and directed by Engineer-in-Charge.\nNOTES:\n1. The WMM shall be laid in two layers i.e each layer of 125 mm thick (compacted thickness).\n2. For payment purpose,both layers shall be considered as one unit.397.5Cubic Metre
5757Item No 38 : Preparation of un-surfaced Wet Mix macadam (WMM) surfaces by brushing with wire brushes for re-moving caked mud ,dust, loose material, foreign material etc., sweeping with power brooms and finally fanning the cleaned surface with air compressors to remove all loose dirt etc. and applying evenly a priming coat on un-surfaced wet mix macadam surfaces conforming to Clause 502 of MORT&H Specifications for Road and Bridge Works (Fifth Revision), with cationic bituminous emulsion SS1 grade,confirming to IS 8887(latest edition) @ 7.5 kg per 10 sq metres using primer distributor which shall be self-propelled or towed bitumen pressure sprayer complete all as specified and directed by Engineer-in-Charge.\n15910 Square Metre
5858Item No. 39 : Providing, laying & compaction of Bituminous Macadam (BM) 50 mm Compacted thickness conforming to Clause 504 of MORT&H Specifications for Road and Bridge Works (Fifth Revision), using mechanically crushed stone aggregates and granual material etc. of grading II as per Table 500-7 of MORT&H Specifications for Road and Bridge Works (Fifth Revision), premixed with bituminous binder, Bitumen grade VG-30 @ 3.50% (percentage by weight of total mix) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity transported to site by tippers, laid over a previously prepared surface with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density complete all as specified and directed by Engineer-in-Charge.\nNotes : (i) The contractor shall quote the rate against Item considering 3.5% VG-30 bitumen content. Job mix formula as per MoRT&H specifications for road and bridge work (Fifth Revision) for bituminous concrete shall be got designed from NIT/ CTL/ Govt Engg College and shall be got approved from GE in writing well before commencement of work without any financial effect to the department. Also the bitumen content shall not be less 3.4% by weight of total mix as per clause 504.2.4 of MoRT&H specifications (Fifth Revision). \n(ii) If qty of binder contents is less than the qty as specified in respective items of BOQ, it shall be adjusted at supply only rates of paving bitumen @ Rs 45.00 Per Kg and if qty of binder contents is more than the qty as specified in respective items of BOQ no adjustment shall be made.79.5Cubic Metre
5959Item No. 40 : Preparation of surfaces and applying evenly a Tack coat conforming to Clause 503 of MORT&H Specifications for Road and Bridge Works (Fifth Revision), with cationic bituminous emulsion RS1 grade,confirming to IS 8887(latest edition) @ 2.5 kg per 10 sq metres using using primer distributor which shall be self-propelled or towed bitumen pressure sprayer complete all as specified and directed by Engineer-in-Charge.\n15910 Square Metre
6060Item No. 41 : Preparation of existing black top surfaces and applying evenly a Tack coat conforming to Clause 503 of MORT&H Specifications for Road and Bridge Works (Fifth Revision), with cationic bituminous emulsion RS1 grade,confirming to IS 8887(latest edition) @ 2.5 kg per 10 sq metres using using primer distributor which shall be self-propelled or towed bitumen pressure sprayer complete all as specified and directed by Engineer-in-Charge.15910 Square Metre
6161Item No. 42 : Providing and laying 30 mm thick (consolidated thickness) Bituminous Concrete (BC) layer conforming to clause 507 of MoRT&H specifications for road and bridge work (Fifth Revision) including cost of coarse aggregates, fine aggregates, filler, 5.5% binder (paving Bitumen grade VG-30) content by weight of total mix and crushed aggregates of grading 2, Anti Stripping Agent, Warm Mix Additives (quantity, quality and grade as per the approved Job Mix Formula) etc, cleaning and pre-heating of the mineral aggregate, filler & bitumen to the specific temperature, thoroughly mixing with binder of specified bitumen content, Anti Stripping Agent, Warm Mix Additives as per mix design in Hot Mix Plant of 100-120 TPH capacity, carrying the hot mixed materials by means of tipper, trucks, or any other approved and suitable arrangements, laying the hot premixed materials over the prepared surface by means of paver finisher including manual operation as and when required for proper grade, level and camber thorough rolling with power roller 8 to 12 tonnes smooth wheeled, vibratory and tandem roller with necessary hand packing and pinning to give an even surface, including running expense of all plants and machineries, inclusive of proper traffic control during laying to the satisfaction of Engineer-in-Charge, required quality control tests at required interval etc complete in all respects complete all as specified and directed by Engr-in-Charge.\n\n\n15910 Square Metre
6262(Item No 42 Contd.....) Notes : (i) The contractor shall quote the rate against Item considering 5.5% VG-30 bitumen content. Job mix formula as per clause No 505.3.3 of MoRT&H specifications for road and bridge work (Fifth Revision) for bituminous concrete shall be got designed from NIT/ CTL/ Govt Engg College and shall be got approved from GE in writing well before commencement of work without any financial effect to the department. Also the bitumen content shall not be less 5.4% by weight of total mix as per clause 507.2.5 of MoRT&H specifications (Fifth Revision). \n(ii)The cost of materials, transportation, Job mix formula from lab and testing charges for various tests as required are included in the unit rate quoted by the contractor. \n(iii) Cost of filler i.e rock dust, hydrated lime or cement is deemed to be included in unit rate.\n(iv) If qty of binder contents is less than the qty as specified in respective items of BOQ, it shall be adjusted at supply only rates of paving bitumen @ Rs 45.00 Per Kg and if qty of binder contents is more than the qty as specified in respective items of BOQ no adjustment shall be made.\n(v) After spreading of mix as per clause 507.4.7 of MoRT&H specifications entire surface during the operation shall be rolled with road roller 8-10 tonnes (smooth wheeled) followed with vibratory road roller of 8 -10 tonnes static weight, followed by finish rolling with 6 to 8 tonnes smoooth wheeled tandem roller as per clause No 507.4.8 of MoRT&H specifications (Fifth Revision) and the cost of the same shall be deemed to be included in the quoted rate.\n\n
6363AIR CONDITIONING
6464Item No. 43: Supply, install, testing and commissioning of install air cooled spilt type air conditioners electric driven (240 Volts, single phase, 50 HZ supply) with Energy efficient Scroll Compressor, working on R-134 A or superior environment-friendly refrigerant, cordless remote operated, comprising of indoor unit, wall mounted, material of construction of indoor unit ABS, Power consumption (Max) 4000 Watts, outdoor unit, powder coated, integral refregerant piping,electric connection (Between indoor and outdoor unit located up to a maximum distance of 10 Meters) and condensate water drainage arrangement etc pressore testing, leak testing, vaccumisation, R 134A gas charging, shifting of indoor and outdoor unit, mounting arrangement of indoor unit with anchor fastner, support rod, vibration isolators complete of following capacity or nearest higher standard size complete of following capacity:- 4500 K Cal per hour ( 1.5 Ton).BEE 5 star rated complete all as specified & directed.3Each
6565Item No:44 : Supply, install, testing and commissioning of install air cooled spilt type air conditioners electric driven (240 Volts, single phase, 50 HZ supply) with Energy efficient Scroll Compressor, working on R-34A or superior environment-friendly refrigerant, cordless remote operated, comprising of indoor unit, wall mounted, material of construction of indoor unit ABS, Power consumption (Max) 4000 Watts, outdoor unit, powder coated, integral refregerant piping,electric connection (Between indoor and outdoor unit located up to a maximum distance of 10 Meters) and condensate water drainage arrangement etc pressore testing, leak testing, vaccumisation, R-134A gas charging, shifting of indoor and outdoor unit, mounting arrangement of indoor unit with anchor fastner, support rod, vibration isolators complete of following capacity or nearest higher standard size complete of following capacity 6000 K Cal per hour ( 2 Ton).BEE 3 star rated all as specified and directred by Eng-in-Charge.4Each
6666Item No 45 Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stablilized at 230 V with accuracy of 2.5% and of following capacity complete all as specified & directed.
6767(a) 4.0 KVA3Each
6868(a) 5.0 KVA4Each
6969SUMMER APPLIANCES
7070Item No. 46 : Supply and installation of Desert cooler with outer body made of PGI ( Plain Galvanised Iron ) sheet not less than 1.20 mm thickness for fixed part , thickness of PGI sheet for shutter not less than 0.80 mm thick, front grill made of PGI sheet with minimum weight 2.80 Kgs. overall outer size not less than 66 cm X 66 cm X 99 cm (height), electric driven copper wounded fan motor having nominal air flow capacity 4000 Cum per hour and submersible pump for required flow of water (sigle phase ), complete all as specified & directed.1Each
7171Item No. 47: Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stablilized at 230 V with accuracy of 2.5% and of capacity 2 KVA complete all as specified & directed.3Each
7272Item No. 48: Supply and installed regrigerators, electric driven (Single phase) , capacity 215 Litres frost free complete all as specified & directed.1Each
7373Item No. 49 : Supply and installed Deep freezer hard top 320 ltrs capacity having double door complete all as specified and directed by EIC1Each
7474Item No.50 : M&L For heavy duty pvc stands for placing / staging of water coolers and refrigirators of Proper sizes complete all as specified & directed.1Each
7575Item No. 51 : Supply and installed desert cooler electric driven (single phase), having nominal air flow capcity of 4000 cum per hour complete all as specified & directed..10Each
7676EXTERNAL ELECTRIFICATION
7777Item No.52 : Supply and laying Sub class ‘B’ old size bricks laid adjacent to each other perpendicular to the direction of cable in trenches for protection of cable all as specified and directed.2435Each
7878Item No. 53 : Earthing complete with galvanised steel earth plate electrode, 40mm bore, medium grade, 2.5 metres length, buried directly and preferably vertically in ground with top edge not less than 1.25 metre below ground level connected with earthing 32 x 6 mm strip galvanised iron of earthinglead all as shown in Plate No. 02 to the earthing test point all as specified and indicted including testing on completion complete all as directed. (Cost of 7.5mm length of GI protection pipe shall be included in the rate of thid item.2Each
7979Item No. 54 : M&L for MS junction box made out of 2 mm thick sheet of size 300mm x 250mm x200 mm including aluminium busbar Single Phase with neutral of 63 Amp capacity with , MCB SP 10 Amp - 01 Nos for incoming and out going connections including necessary welding work, clamps and mounting on poles etc complete all as specefied and directed.7Each
8080Item No. 55 : S&F LED street light IP 66 powder coated pressure die cast aluminium compact high power LED street light fitting 25 watts with heat resistant toughned glass complete with all accessoreis watts. Make: PolycabPUB05007 or equivalent or equivalent makes mentioned in tender documents complete all as specefied and directed.7Each
8181Item No. 56 : S & F brackets for street light lumanaries 40 mm light grade GI pipe with 2 Nos clamps etc length of GI pipe not more than 1.5 metre length. (For fixing on poles)7Each
8282Item No. 57 : Supply, levelling and well ramming sand cushioning in trenches for cable protection complete all as speified and as directed. Note : Thickness of sand cushioning after punning down shall be measured for payment purpose.22.68Cubic metre
8383Item No. 48 : item no.6 : Cable (with approved colour coding as per iS)with single core FRLS PVC insulated flexible multistranded copper conductor 1.1 KV grade for security light fitting (main cable : number of runs indicated below)along with one run of single core FRLS PVC insulated flexible multistranded copper conductor 1.1 KV grade for earthing in and including PVC conduits of suitable size,for 2 runs of 2.5 sqmm main cable + 1 run of 1.5 sqmm.64Running Metre
8484Item No.58 : Cable (with approved colour coading as per iS)with single core FRLS PVC insulated flexible multistranded copper conductor 1.1 KV grade for security light fitting (main cable : number of runs indicated below)along with one run of single core FRLS PVC insulated flexible multistranded copper conductor 1.1 KV grade for earthing in and including PVC conduits of suitable size,for 2 runs of 2.5 sqmm main cable + 1 run of 1.5 sqmm.64Running Metre
8585Item No. 59 : Supply , installation, commissionning and testing of out door LT panel board made out of CRCA sheet 3.15 mm thick vermin proof factory made with angle and aluminium bus bar of capacity 200 Amps for 3 phase and neutral with nessary angle iron 50 X 6 mm support frame including two coats powder painting over a coat of red oxide primer and grout in PCC complete all as specified and directed comprising of the following :-\nINCOMING\n(a) Aluminium bus bar of capacity 200 Amps for 3 phase with neutral - one job\n(b) MCCB 415 V, 100 A, 4 pole with over load , short circuit and earth fault protection with earth module breaking capacity 25 KA- 01 Nos.\n(c) Digital votl meter 0-500 volts square flush mounted with inbuild selector switch -01 Nos.\n(d) Digital ampere meter square flush mounted with inbuild selector switch -01 Nos\n(e) Indicator lamps RYB LED type - 01 Set of three.(e) CT coils 100 /5 A-03 Nos.\nOUT GOING\n(a) MCCB 63 A, 415V , 3 pole with over load short circuit protection, breaking capacity 16 KA - 03 Nos(2+1)\n(b) MCB 20 A,230V , 2 pole with over load short circuit protection, breaking capacity 10 KA - 01 Nos \n\nNote :-(i) All MCCBs / instruments / MCBs /Bus Bar shall be housed in a separate housing with on- off latches in the housing. (location Sainik Institute )1Each Job
8686EXTERNAL WATER SUPPLY
8787Item No. 60 : M & L for cutting of exiting 150 mm dia CI/DI/GI Pipe line and including insert 'T' of 50 mm dia branch pipe including complete earth work end joint as specified & directed.1Each Job
8888Item No. 61 : M&L for construction of brick masonry valve pit of size 900 X 900 X 900 mm (internal dimension) one brick thick wall in CM 1:4 on 100mm thick PCC 1:4:8 type D-2 (40mm graded aggregate) as in foundation, and 15mm thick rendering in cement mortar (1:4) internally, externally up to 15cm below GL, providing valve pit cover made of 3mm thick MS sheet/plate, welded including provision of hinges, handle and locking arrangement including 40 X 40 X 6mm angle iron frame fixed on top of valve pit by means of hold fast 150mm long, embedded in PCC block 1:2:4 type B-1 (20mm graded aggregate) of size 230 X 200 X 100mm, including two coats of anti-corrosive paint over a coat of red oxide zinc Chrome primer and necessary earth work in soft/loose soil complete all as specified & directed.1Each

AI Tender Summary

OUR REF NO 28487820
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 3.75 Crore
LAST DATE 18-09-2021
Authority
Authority Name Military Engineer Services
Work Description Provision Of Sainik Institute At Patiala - 1 Total Amount Of Sch A Sec-I ( Building Works ) Lump Sum Price Worked Out By The Contractor For Building Works As Listed In Schedule A Part-I 2 Total Amount Of Sch A Sec Ii ( Site Clearance & Earth Works ) Lump Sum Price Worked Out By The Contractor For Site Clearance & Earth Works As Listed In Schedule A Part-Ii 3 Total Amount Of Sch A Sec Iii ( Internal Electrification Works ) Lump Sum Price Worked Out By The Contractor For Building Works As Listed In Schedule A Part-Iii 4 Total Amount Of Sch A Sec Iv ( Internal Water Supply Works ) Lump Sum Price Worked Out By The Contractor For Internal Water Supply Works As Listed In Schedule A Part-Iv 5 Total Amount Of Sch A Sec V ( Sewage Disposal Works ) Lump Sum Price Worked Out By The Contractor For Sewage Disposal Works As Listed In Schedule A Part-V 6 Total Amount Of Sch A Sec Vi ( Area Drainage Works ) Lump Sum Price Worked Out By The Contractor For Area Drainage Works As Listed In Schedule A Part-Vi 7 Total Amount Of Sch A Sec Vii ( Road / Path / Culvert Works ) Lump Sum Price Worked Out By The Contractor For Road / Path / Culvert Works As Listed In Schedule A Part-Vii 8 Total Amount Of Sch A Sec Viii ( Security Wall / Fencing Works ) Lump Sum Price Worked Out By The Contractor For Security Wall / Fencing Works As Listed In Schedule A Part-Viii 9 Total Amount Of Sch A Sec Ix ( External Electrification Works ) Lump Sum Price Worked Out By The Contractor For External Electrification Works As Listed In Schedule A Part-Ix. 10 Total Amount Of Sch A Sec X ( External Water Supply Works ) Lump Sum Price Worked Out By The Contractor For External Water Supply Works As Listed In Schedule A Part-X. 11 Total Amount Of Sch A Sec Xi ( Summer Appliances Works ) Lump Sum Price Worked Out By The Contractor For Summer Appliances Works As Listed In Schedule A Part-Xi. 12 Total Amount Of Sch A Sec Xii ( Open Platform Works ) Lump Sum Price Worked Out By The Contractor For Open Platform Works As Listed In Schedule A Part-Xiii. 13 Schedule Asection-Xiii ( Misc Items Of Works ) Note : This Schedule Is Not Pre-Priced By Mes And The Pre-Priced Rate Indicated As Rs 0.00 Under Col. 5 Siginifies This Fact Only. 14 Internal Electric Supply Works 15 Item No. 1 :M& L Point Wiring Complete With 1.5 Sqmm ( Nominal Area ) Pvc Insulated Unsheathed Multistranded Copper Condutor Single Core Cable 1100 Volts Grade Frlsh Isi Marked Drawn Through And Including Heavy Duty Non Metalic Pvc Conduit, Isi Marked Of Not Less Than 20 Mm Dia, Concealed In Wall, Roof, Etc, With All Connected Fittings, Etc. Suitable For Mounting Modular Switches, Sockets Etc And Including Frlsh Pvc Insulated Unsheathed Multistranded Single Core Copper Conductor Cable Of Size 1.5 Sq Mm Green In Colour As In Earth Continuity Conductor Connected To Common Earth Dolly And All Metal Parts Of Fittings As Specified And Directed For The Following:- Nnote:- Switches , Sockets, Ceiling Rose, Regulators, Modular Metal Boxes, Cover Plate Etc Shall Be Measured And Paid Separately. 16 ( A ) One Light / Fan / Bell Point Controlled By One Switch 17 ( B ) One 5 Pin Socket Outlet Independent 5 / 6 Amps 18 ( C ) One Socket Outlet 5 / 6 Amps On The Same Board With Other Switches. 19 ( D ) One 6 Pin 6 / 16 Amps Socket Outlet Independent With 2.5 Sqmm Size Copper Conductor Cable And 1.5 Sqmm Copper Cables As Earth Wire. 20 Item No 2: M& L Point Wiring Complete With 2.5 Sqmm ( Nominal Area ) Pvc Insulated Unsheathed Multistranded Copper Condutor Single Core Cable 1100 Volts Grade Frlsh Isi Marked Drawn Through And Including Heavy Duty Non Metalic Pvc Conduit, Isi Marked Of Not Less Than 20 Mm Dia, Concealed In Wall, Roof, Etc, Two Light Controlled By One Switch With All Connected Fittings, Suitable For Mounting Modular Switches, Sockets Etc And Including Frlsh Pvc Insulated Unsheathed Multistranded Single Core Copper Conductor Cable Of Size 2.5 Sq Mm Green In Colour As In Earth Continuity Conductor Connected To Common Earth Dolly And All Metal Parts Of Fittings As Specified And Directed. Nnote:- Switches , Sockets, Ceiling Rose, Regulators Mosular Metal Boxes, Cover Plates Etc Shall Be Measured And Paid Separately. 21 Item No 3: S&F White Cover Plate With Frame 12 Module 240 Volts Andcomplete All As Specified And Directed By The Engr-In-Charge. 22 Item No 4: S&F Modular Metal Box 8 Module And Complete All As Specified And Directed By The Engr-In-Charge. 23 Item No 5: S&F Modular Metal Box 12 Module And Complete All As Specified And Directed By The Engr-In-Charge. 24 Item No 6: Supply And Fixing Modular Angle Holder Cat Pat No 33958 Of Anchor Or Equivalent Makes With Insulated Body With Back Plate For Led Lamps All As Specified And Directed By The Engr-In-Charge. 25 Item No 7: Supply And Fixing Led Downlighter 9 Watt, Retrofit All As Specified And Directed By Engr-In-Charge. 26 Item No 8: S&F Led Tube Light Fittings 1 X 18 W, 230V, Complete With All Accessories Internally Prewired And Including Connecting Up With Twisted Flexible Pvc Copper Conductor Cable Of 23 / 0.0076 From Ceiling Rose All As Directed By Engr-In- Charge. 27 Item No. 9: S&F Of Double Door Three Phase Distribution Board 6 Way Made Out Of Crca Sheets 1.6 Mm Thick, Phosphatised Powder Coated With Copper Bus Bar 200 Amps, 415 V, Earth Stud, Din Rail, Polymide Terminal Blocks For Incoming And Outgoing Circuits, Inbuilt Loose Wire Box , Ground Terminal Blocks , Duly Wired With Thimbled Flame Retardant Copper Conductors And Poly Layer For Protection In All As Specified And Directed. ( Note:- Single Phase Mcbs Are To Be Measured And Paid For Seperately ) N 28 Item No. 10: S&F Sheet Metal Enclosure Mccb Tpn Distribution Board, Double Door, Ip 43 Class, Including Suitable Size Copper Bus-Bar, 415V, 4 Way With Shrouded Neutral Bar, Earth Bar And Incld. Cable Ties And Suitable Size Blanks, Including Taking Down Of Existing Sheet Metal Enclosure Complete All As Specified And Directed. 29 Item No. 11: Supply And Fixing In Replacement Isolator 40 Amps, 10 Ka, C Series 240 V Isi Marked Complete All As Specified And Directed By Engr-In-Charge. 30 Item No. 12: S&F For Flush Fixing Of Sheet Metal Enclosure Mcb Spn Distribution Board, Double Door, Ip 43 Class, Including Suitable Size Copper Bus-Bar, 240V, 12 Way With Shrouded Neutral Bar, Earth Bar And Incld. Cable Ties And Suitable Size Blanks, Including Taking Down Of Existing Sheet Metal Enclosure Complete All As Specified And Directed. N 31 Item No. 13: S&F For Flush Fixing Of Sheet Metal Enclosure Mcb Spn Distribution Board, Double Door, Ip 43 Class, Including Suitable Size Copper Bus-Bar, 240V, 6 Way With Shrouded Neutral Bar, Earth Bar And Incld. Cable Ties And Suitable Size Blanks, Including Taking Down Of Existing Sheet Metal Enclosure Complete All As Specified And Directed. N 32 Item No. 14 : Supply And Fixing Mcb Tpn 63 Amps, 10 Ka C Series 240 V Isi Marked.Complete All As Specified And Directed By Engr-In-Charge. 33 Item No 15: Supply And Fixing Thermal Magnetic Adjustable Type Mccb 125 Amps , 16 Ka, C Series 415. V Isi Marked.Complete All As Specified And Directed By Engr-In-Charge. 34 Item No 16 : Supply And Fixing Cable Pvc, 2 Single Core 2.5 Sq Mm Stranded Aluminium Conductor, 1100 Volts Grade Heavy Duty Unarmoured 35 Item No 17 : Supply And Fixing Mirror Light Fitting Led 10W, 230 V, 2Ft All As Per Crompton Make Cat No. - Lcl-14-Cdl Or Equivalent Makes Mentioned In Tender Documents, Complete All As Specified And Directed By Engr-In-Charge. 36 Item No 18 : S&F Led Building Security Light, Pressure Die Cast Aluminum Housing, 25 Watts Capacity, 240V, Ip 65 Class, With Suitable In-Built Electronic Driver Complete Incld. Fixed On A Bracket Made Out Of 1.5 Mtr Long Med Grade Gi Pipe 40 Mm Dia Bend To Shape As Directed Fitted On Wall At A Height Not Less Than 6 Mtr From Ground With Ms Clamp, Nuts And Bolts And Washers As Required At Site And Incld. Connecting Luminarie To The Nearest Ceiling Rose / Junction Box With 1.5 Sqmm Pvc Insulated 3 Core Wire Complete All As Directed And Specified By Engr-In-Charge Of Make Crompton Greaves Or Equivalent In Philips / Wipro. Note - Cost Of All Minor Spares And Jobs Required For Fixing Of Light Fixture On Wall And For Electrical Connections Are Deemed To Be Included In The Quoted Rate. 37 Item No 19 : Suppy And Fixing Exhaust Fan Heavy Duty With Louvers Of Size 380Mm Sweep, 900 Rpm 230 Volts Single Phase Ac Supply Complete With, Bolt, Nuts And Washers, Suitably Embedded In The Wall Including Making Suitable Opening And Provisioning Of Flexible Cord Copper Of Size 23 / 0.0076 From Ceiling Rose To Exhaust Fan For Giving Connection Complete All As Specified And Directed By Engineer-In-Charge. 38 Item No 20 : Supply Only Sheet Metal Enclosure With Socket Plug Top And Mcb Sp Cap 20 Amps With A 2 Pin, Earth Plug And Socket Complete All As Specified And Directed By Engr-In-Charge. 39 Item No 21 : Supply And Fixing In Light Fitting Led Panel 25 W, 230 V, Round Type Surface Mounted, Injection Molded In Thermally Conductive Engineered Plastic-Fr V0 Grade Housing, Diffuser With High Optically Efficient Material All As Per Crompton Cat Part No.:- Lcrp-20-Cdl Or Equivalent Model Of Makes Mentioned In Tender Documents, Complete All As Specified And Directed By Engr-In-Charge. 40 Item No 22 : Supply And Fixing In Light Fitting Led Panel 36 W, 230 V, Round Type Surface Mounted, Injection Molded In Thermally Conductive Engineered Plastic-Fr V0 Grade Housing, Diffuser With High Optically Efficient Material All As Per Crompton Cat No.:- Lcrp-20-Cdl Make Or Equivalent Or Equivalent Makes Mentioned In Tender Documents, Complete All As Specified And Directed By Engr-In-Charge. 41 Item No 23 : Supply And Fixing Of 100W Led Flood Light With System Lumen Efficacy=100 Lm / W Operating Voltage Between 140-270Vac, Driver Will Comply For 440Vac Operation ( Will Sustain For 4 - 6 Hrs Continuously ) , Driver Will Have Cut Off At > 300 Vac, Power Factor More Than 0.95%, Led Cct 5665±355K As Per Ansi Bin, Led Driving Current < 70% Of Rated Maximum Forward Current, Luminaire Intergal Driver With 5Kv Surge Protection, Over Load Protection, No Load Protection And Bis Marking ( R No. For Driver ) , Driver Certiifcation Iec64347-2-13 Is ( 15885 ) , Driver Should Be Concealed Under Ip66, Over All Electrical Efficency More Than 90%, Driver Electrical Efficiency Will Be > 85% Connecting With Pvc Copper Cable Of Size 3X1 Sqmm As Per Is 10322 At Complete All As Specified And Directed. 42 Item No 24 : Supply And Fixing Of 60W Led High Bay Light With Surface Mounted Device ( Smd ) With Multiple Led With Borosilicate Glass Lens And Acrylic, With Aluminum Reflector, Operating Voltage Between 140-270Vac, Power Factor More Than 0.95%, Intergal Driver With 5Kv Surge Protection Differential Mode / Coman Mode , Led Cct 5665±355K As Per Ansi Bin, Over Load Protection, No Load Protection, Driver Should Be Concealed Under Ip66 And Bis Marking ( R No. For Driver ) , Driver Certiifcation Iec64347-2-13 Is ( 15885 ) , System Lumen >15000, Cri>70, Over All Electrical Efficency More Than 90%, Connecting With Pvc Copper Cable Of Size 3X1 Sqmm Complete All As Specified And Directed. 43 Item No 25 : Supply, Installation, Connecting And Testing Of Ceiling Fan Electric Single Phase 230 Volts Ac Of Sweep 1200Mm Having Service Value More Than 4, Complete With Mounting Arrangment In Ceiling Such As Down Rod 600Mm, Hooks, Clamps, Nuts, Bolts And Washers Etc Complete All As Specified And Directed. 44 Item No 26 : Material And Labour For Ceiling Rose Surface Type, 65Mm X 50Mm Two To Three Terminals / Pvc / Polycarbonate, Isolated Body Fixed On Pvc Block Complete All As Specified And Directed. 45 Item No 27 : Supply And Fix Of Mcb Sp 6-32 Amp 230V Complete All As Specified And Directed. 46 Item No 28 : Material And Labour For Call Bell Ding Dong Ac 230 Volt Single Pole Complete All As Specified And Directed. 47 Item No 29 : Supply And Fix Environmental Friendly, Ultra Modern, Energy Saving, Surface Mounted, Decorative Stud Bulk Head Edge-Lit Led Luminaire Comprising Of High Brightness Leds Of Capacity 10 Watts Complete All As Specified And Directed. 48 Road, Path & Culverts 49 Item No 30 : Delinators Of Size 700X100x50mm Of Abs Round Body Fixed With 100Mm Dia Highly Reflective Reflector, Duly Uv Stablized, In Yellow Colour Complete All As Specified. 50 Item No. 31: Cat Eye Two Way Reflective Of Size 100 X 100 X 18.5Mm With Pvc Body With Reflective Panels Amber / Red / White Complete All As Specified And Directed. 51 Item No. 32: Supply Only Sand For Sand Cusioning Under Interlocking Paver Block Complete All As Specified And Directed. 52 Item No. 33 : M&L Bringing Approved Earth From Outside Md Land Including Cost Of Earth & Carriage Complete All As Specified And Directed. 53 Item No. 34 :Painting Lines, Dashes, Arrows, Letters Etc On Road Pavement And The Like Not Exceeding 10 Cm Wide With Thermo Plastic Paint . 54 Item No. 35 :Painting Lines, Dashes, Arrows, Letters Etc On Road Pavement And The Like Exceeding 10 Cm Wide With Thermo Plastic Paint. 55 Item No.36 : Providing, Laying, Compaction Of Granular Sub-Base By Providing Close Graded Material Conforming To Specifications I.E Grading Ii, Conforming To Clause 401 Of Mort&H Specifications For Road And Bridge Works ( Fifth Revision ) , Mixing In A Mechanical Mix Plant At Omc, Carriage Of Mixed Material By Tippers To Work Site, For All Leads & Lifts, Spreading In Uniform Layers Of Specified Thickness With Motor Grader On Prepared Surface And Compacting With Vibratory Power Roller Of Capacity 8 To 12 Tonne To Achieve The Desired Density, 150 Mm Thick Compacted Thickness, Complete All As Specified And Directed By Engr-In-Charge. 56 Item No. 37 : Providing, Laying, Compaction Of Wet Mix Macadam Conforming To Clause 406 Of Mort&H Specifications For Road And Bridge Works ( Fifth Revision ) , 250 Mm Thick ( Compacted Thickness, 125 Mm Thick In Two Separate Layers ) With Mechanically Crushed Graded Stone Aggregates And Granular Material ( Size Range 53 Mm To 0.075 Mm ) , Grading Of Aggregates As Per Table 400-13 Of Mort&H Specifications For Road And Bridge Works ( Fifth Revision ) , Including Premixing The Material With Water At Omc In For All Leads & Lifts, Laying In Uniform Layers With Mechanical Paverfinisher In Sub- Base / Base Course On Well Prepared Surface And Compacting With Vibratory Roller Of 8 To 12 Tonne Capacity To Achieve The Desired Density , Required Gradient And Camber Etc., Complete All As Specified And Directed By Engineer-In-Charge. Nnotes: N1. The Wmm Shall Be Laid In Two Layers I.E Each Layer Of 125 Mm Thick ( Compacted Thickness ) . N2. For Payment Purpose, Both Layers Shall Be Considered As One Unit. 57 Item No 38 : Preparation Of Un-Surfaced Wet Mix Macadam ( Wmm ) Surfaces By Brushing With Wire Brushes For Re-Moving Caked Mud , Dust, Loose Material, Foreign Material Etc., Sweeping With Power Brooms And Finally Fanning The Cleaned Surface With Air Compressors To Remove All Loose Dirt Etc. And Applying Evenly A Priming Coat On Un-Surfaced Wet Mix Macadam Surfaces Conforming To Clause 502 Of Mort&H Specifications For Road And Bridge Works ( Fifth Revision ) , With Cationic Bituminous Emulsion Ss1 Grade, Confirming To Is 8887 ( Latest Edition ) @ 7.5 Kg Per 10 Sq Metres Using Primer Distributor Which Shall Be Self-Propelled Or Towed Bitumen Pressure Sprayer Complete All As Specified And Directed By Engineer-In-Charge. N 58 Item No. 39 : Providing, Laying & Compaction Of Bituminous Macadam ( Bm ) 50 Mm Compacted Thickness Conforming To Clause 504 Of Mort&H Specifications For Road And Bridge Works ( Fifth Revision ) , Using Mechanically Crushed Stone Aggregates And Granual Material Etc. Of Grading Ii As Per Table 500-7 Of Mort&H Specifications For Road And Bridge Works ( Fifth Revision ) , Premixed With Bituminous Binder, Bitumen Grade Vg-30 @ 3.50% ( Percentage By Weight Of Total Mix ) Prepared In Batch Type Hot Mix Plant Of 100-120 Tph Capacity Transported To Site By Tippers, Laid Over A Previously Prepared Surface With Paver Finisher Equiped With Electronic Sensor To The Required Grade, Level And Alignment And Rolling With Smooth Wheeled, Vibratory And Tandem Rollers As Per Specifications To Achieve The Desired Compaction And Density Complete All As Specified And Directed By Engineer-In-Charge. Nnotes : ( I ) The Contractor Shall Quote The Rate Against Item Considering 3.5% Vg-30 Bitumen Content. Job Mix Formula As Per Mort&H Specifications For Road And Bridge Work ( Fifth Revision ) For Bituminous Concrete Shall Be Got Designed From Nit / Ctl / Govt Engg College And Shall Be Got Approved From Ge In Writing Well Before Commencement Of Work Without Any Financial Effect To The Department. Also The Bitumen Content Shall Not Be Less 3.4% By Weight Of Total Mix As Per Clause 504.2.4 Of Mort&H Specifications ( Fifth Revision ) . N ( Ii ) If Qty Of Binder Contents Is Less Than The Qty As Specified In Respective Items Of Boq, It Shall Be Adjusted At Supply Only Rates Of Paving Bitumen @ Rs 45.00 Per Kg And If Qty Of Binder Contents Is More Than The Qty As Specified In Respective Items Of Boq No Adjustment Shall Be Made. 59 Item No. 40 : Preparation Of Surfaces And Applying Evenly A Tack Coat Conforming To Clause 503 Of Mort&H Specifications For Road And Bridge Works ( Fifth Revision ) , With Cationic Bituminous Emulsion Rs1 Grade, Confirming To Is 8887 ( Latest Edition ) @ 2.5 Kg Per 10 Sq Metres Using Using Primer Distributor Which Shall Be Self-Propelled Or Towed Bitumen Pressure Sprayer Complete All As Specified And Directed By Engineer-In-Charge. N 60 Item No. 41 : Preparation Of Existing Black Top Surfaces And Applying Evenly A Tack Coat Conforming To Clause 503 Of Mort&H Specifications For Road And Bridge Works ( Fifth Revision ) , With Cationic Bituminous Emulsion Rs1 Grade, Confirming To Is 8887 ( Latest Edition ) @ 2.5 Kg Per 10 Sq Metres Using Using Primer Distributor Which Shall Be Self-Propelled Or Towed Bitumen Pressure Sprayer Complete All As Specified And Directed By Engineer-In-Charge. 61 Item No. 42 : Providing And Laying 30 Mm Thick ( Consolidated Thickness ) Bituminous Concrete ( Bc ) Layer Conforming To Clause 507 Of Mort&H Specifications For Road And Bridge Work ( Fifth Revision ) Including Cost Of Coarse Aggregates, Fine Aggregates, Filler, 5.5% Binder ( Paving Bitumen Grade Vg-30 ) Content By Weight Of Total Mix And Crushed Aggregates Of Grading 2, Anti Stripping Agent, Warm Mix Additives ( Quantity, Quality And Grade As Per The Approved Job Mix Formula ) Etc, Cleaning And Pre-Heating Of The Mineral Aggregate, Filler & Bitumen To The Specific Temperature, Thoroughly Mixing With Binder Of Specified Bitumen Content, Anti Stripping Agent, Warm Mix Additives As Per Mix Design In Hot Mix Plant Of 100-120 Tph Capacity, Carrying The Hot Mixed Materials By Means Of Tipper, Trucks, Or Any Other Approved And Suitable Arrangements, Laying The Hot Premixed Materials Over The Prepared Surface By Means Of Paver Finisher Including Manual Operation As And When Required For Proper Grade, Level And Camber Thorough Rolling With Power Roller 8 To 12 Tonnes Smooth Wheeled, Vibratory And Tandem Roller With Necessary Hand Packing And Pinning To Give An Even Surface, Including Running Expense Of All Plants And Machineries, Inclusive Of Proper Traffic Control During Laying To The Satisfaction Of Engineer-In-Charge, Required Quality Control Tests At Required Interval Etc Complete In All Respects Complete All As Specified And Directed By Engr-In-Charge. N N N 62 ( Item No 42 Contd..... ) Notes : ( I ) The Contractor Shall Quote The Rate Against Item Considering 5.5% Vg-30 Bitumen Content. Job Mix Formula As Per Clause No 505.3.3 Of Mort&H Specifications For Road And Bridge Work ( Fifth Revision ) For Bituminous Concrete Shall Be Got Designed From Nit / Ctl / Govt Engg College And Shall Be Got Approved From Ge In Writing Well Before Commencement Of Work Without Any Financial Effect To The Department. Also The Bitumen Content Shall Not Be Less 5.4% By Weight Of Total Mix As Per Clause 507.2.5 Of Mort&H Specifications ( Fifth Revision ) . N ( Ii ) The Cost Of Materials, Transportation, Job Mix Formula From Lab And Testing Charges For Various Tests As Required Are Included In The Unit Rate Quoted By The Contractor. N ( Iii ) Cost Of Filler I.E Rock Dust, Hydrated Lime Or Cement Is Deemed To Be Included In Unit Rate. N ( Iv ) If Qty Of Binder Contents Is Less Than The Qty As Specified In Respective Items Of Boq, It Shall Be Adjusted At Supply Only Rates Of Paving Bitumen @ Rs 45.00 Per Kg And If Qty Of Binder Contents Is More Than The Qty As Specified In Respective Items Of Boq No Adjustment Shall Be Made. N ( V ) After Spreading Of Mix As Per Clause 507.4.7 Of Mort&H Specifications Entire Surface During The Operation Shall Be Rolled With Road Roller 8-10 Tonnes ( Smooth Wheeled ) Followed With Vibratory Road Roller Of 8 -10 Tonnes Static Weight, Followed By Finish Rolling With 6 To 8 Tonnes Smoooth Wheeled Tandem Roller As Per Clause No 507.4.8 Of Mort&H Specifications ( Fifth Revision ) And The Cost Of The Same Shall Be Deemed To Be Included In The Quoted Rate. N N 63 Air Conditioning 64 Item No. 43: Supply, Install, Testing And Commissioning Of Install Air Cooled Spilt Type Air Conditioners Electric Driven ( 240 Volts, Single Phase, 50 Hz Supply ) With Energy Efficient Scroll Compressor, Working On R-134 A Or Superior Environment-Friendly Refrigerant, Cordless Remote Operated, Comprising Of Indoor Unit, Wall Mounted, Material Of Construction Of Indoor Unit Abs, Power Consumption ( Max ) 4000 Watts, Outdoor Unit, Powder Coated, Integral Refregerant Piping, Electric Connection ( Between Indoor And Outdoor Unit Located Up To A Maximum Distance Of 10 Meters ) And Condensate Water Drainage Arrangement Etc Pressore Testing, Leak Testing, Vaccumisation, R 134A Gas Charging, Shifting Of Indoor And Outdoor Unit, Mounting Arrangement Of Indoor Unit With Anchor Fastner, Support Rod, Vibration Isolators Complete Of Following Capacity Or Nearest Higher Standard Size Complete Of Following Capacity:- 4500 K Cal Per Hour ( 1.5 Ton ) .Bee 5 Star Rated Complete All As Specified & Directed. 65 Item No:44 : Supply, Install, Testing And Commissioning Of Install Air Cooled Spilt Type Air Conditioners Electric Driven ( 240 Volts, Single Phase, 50 Hz Supply ) With Energy Efficient Scroll Compressor, Working On R-34A Or Superior Environment-Friendly Refrigerant, Cordless Remote Operated, Comprising Of Indoor Unit, Wall Mounted, Material Of Construction Of Indoor Unit Abs, Power Consumption ( Max ) 4000 Watts, Outdoor Unit, Powder Coated, Integral Refregerant Piping, Electric Connection ( Between Indoor And Outdoor Unit Located Up To A Maximum Distance Of 10 Meters ) And Condensate Water Drainage Arrangement Etc Pressore Testing, Leak Testing, Vaccumisation, R-134A Gas Charging, Shifting Of Indoor And Outdoor Unit, Mounting Arrangement Of Indoor Unit With Anchor Fastner, Support Rod, Vibration Isolators Complete Of Following Capacity Or Nearest Higher Standard Size Complete Of Following Capacity 6000 K Cal Per Hour ( 2 Ton ) .Bee 3 Star Rated All As Specified And Directred By Eng-In-Charge. 66 Item No 45 Voltage Stabilizer For Automatic Operation, Single Phase Naturally Air Cooled Indoor Type & Designed For Input Variation Between 170 V To 250 V With Output Voltage Stablilized At 230 V With Accuracy Of 2.5% And Of Following Capacity Complete All As Specified & Directed. 67 ( A ) 4.0 Kva 68 ( A ) 5.0 Kva 69 Summer Appliances 70 Item No. 46 : Supply And Installation Of Desert Cooler With Outer Body Made Of Pgi ( Plain Galvanised Iron ) Sheet Not Less Than 1.20 Mm Thickness For Fixed Part , Thickness Of Pgi Sheet For Shutter Not Less Than 0.80 Mm Thick, Front Grill Made Of Pgi Sheet With Minimum Weight 2.80 Kgs. Overall Outer Size Not Less Than 66 Cm X 66 Cm X 99 Cm ( Height ) , Electric Driven Copper Wounded Fan Motor Having Nominal Air Flow Capacity 4000 Cum Per Hour And Submersible Pump For Required Flow Of Water ( Sigle Phase ) , Complete All As Specified & Directed. 71 Item No. 47: Voltage Stabilizer For Automatic Operation, Single Phase Naturally Air Cooled Indoor Type & Designed For Input Variation Between 170 V To 250 V With Output Voltage Stablilized At 230 V With Accuracy Of 2.5% And Of Capacity 2 Kva Complete All As Specified & Directed. 72 Item No. 48: Supply And Installed Regrigerators, Electric Driven ( Single Phase ) , Capacity 215 Litres Frost Free Complete All As Specified & Directed. 73 Item No. 49 : Supply And Installed Deep Freezer Hard Top 320 Ltrs Capacity Having Double Door Complete All As Specified And Directed By Eic 74 Item No.50 : M&L For Heavy Duty Pvc Stands For Placing / Staging Of Water Coolers And Refrigirators Of Proper Sizes Complete All As Specified & Directed. 75 Item No. 51 : Supply And Installed Desert Cooler Electric Driven ( Single Phase ) , Having Nominal Air Flow Capcity Of 4000 Cum Per Hour Complete All As Specified & Directed.. 76 External Electrification 77 Item No.52 : Supply And Laying Sub Class ‘B’ Old Size Bricks Laid Adjacent To Each Other Perpendicular To The Direction Of Cable In Trenches For Protection Of Cable All As Specified And Directed. 78 Item No. 53 : Earthing Complete With Galvanised Steel Earth Plate Electrode, 40Mm Bore, Medium Grade, 2.5 Metres Length, Buried Directly And Preferably Vertically In Ground With Top Edge Not Less Than 1.25 Metre Below Ground Level Connected With Earthing 32 X 6 Mm Strip Galvanised Iron Of Earthinglead All As Shown In Plate No. 02 To The Earthing Test Point All As Specified And Indicted Including Testing On Completion Complete All As Directed. ( Cost Of 7.5Mm Length Of Gi Protection Pipe Shall Be Included In The Rate Of Thid Item. 79 Item No. 54 : M&L For Ms Junction Box Made Out Of 2 Mm Thick Sheet Of Size 300Mm X 250Mm X200 Mm Including Aluminium Busbar Single Phase With Neutral Of 63 Amp Capacity With , Mcb Sp 10 Amp - 01 Nos For Incoming And Out Going Connections Including Necessary Welding Work, Clamps And Mounting On Poles Etc Complete All As Specefied And Directed. 80 Item No. 55 : S&F Led Street Light Ip 66 Powder Coated Pressure Die Cast Aluminium Compact High Power Led Street Light Fitting 25 Watts With Heat Resistant Toughned Glass Complete With All Accessoreis Watts. Make: Polycabpub05007 Or Equivalent Or Equivalent Makes Mentioned In Tender Documents Complete All As Specefied And Directed. 81 Item No. 56 : S & F Brackets For Street Light Lumanaries 40 Mm Light Grade Gi Pipe With 2 Nos Clamps Etc Length Of Gi Pipe Not More Than 1.5 Metre Length. ( For Fixing On Poles ) 82 Item No. 57 : Supply, Levelling And Well Ramming Sand Cushioning In Trenches For Cable Protection Complete All As Speified And As Directed. Note : Thickness Of Sand Cushioning After Punning Down Shall Be Measured For Payment Purpose. 83 Item No. 48 : Item No.6 : Cable ( With Approved Colour Coding As Per Is ) With Single Core Frls Pvc Insulated Flexible Multistranded Copper Conductor 1.1 Kv Grade For Security Light Fitting ( Main Cable : Number Of Runs Indicated Below ) Along With One Run Of Single Core Frls Pvc Insulated Flexible Multistranded Copper Conductor 1.1 Kv Grade For Earthing In And Including Pvc Conduits Of Suitable Size, For 2 Runs Of 2.5 Sqmm Main Cable + 1 Run Of 1.5 Sqmm. 84 Item No.58 : Cable ( With Approved Colour Coading As Per Is ) With Single Core Frls Pvc Insulated Flexible Multistranded Copper Conductor 1.1 Kv Grade For Security Light Fitting ( Main Cable : Number Of Runs Indicated Below ) Along With One Run Of Single Core Frls Pvc Insulated Flexible Multistranded Copper Conductor 1.1 Kv Grade For Earthing In And Including Pvc Conduits Of Suitable Size, For 2 Runs Of 2.5 Sqmm Main Cable + 1 Run Of 1.5 Sqmm. 85 Item No. 59 : Supply , Installation, Commissionning And Testing Of Out Door Lt Panel Board Made Out Of Crca Sheet 3.15 Mm Thick Vermin Proof Factory Made With Angle And Aluminium Bus Bar Of Capacity 200 Amps For 3 Phase And Neutral With Nessary Angle Iron 50 X 6 Mm Support Frame Including Two Coats Powder Painting Over A Coat Of Red Oxide Primer And Grout In Pcc Complete All As Specified And Directed Comprising Of The Following :- Nincoming N ( A ) Aluminium Bus Bar Of Capacity 200 Amps For 3 Phase With Neutral - One Job N ( B ) Mccb 415 V, 100 A, 4 Pole With Over Load , Short Circuit And Earth Fault Protection With Earth Module Breaking Capacity 25 Ka- 01 Nos. N ( C ) Digital Votl Meter 0-500 Volts Square Flush Mounted With Inbuild Selector Switch -01 Nos. N ( D ) Digital Ampere Meter Square Flush Mounted With Inbuild Selector Switch -01 Nos N ( E ) Indicator Lamps Ryb Led Type - 01 Set Of Three. ( E ) Ct Coils 100 / 5 A-03 Nos. Nout Going N ( A ) Mccb 63 A, 415V , 3 Pole With Over Load Short Circuit Protection, Breaking Capacity 16 Ka - 03 Nos ( 2+1 ) N ( B ) Mcb 20 A, 230V , 2 Pole With Over Load Short Circuit Protection, Breaking Capacity 10 Ka - 01 Nos N Nnote :- ( I ) All Mccbs / Instruments / Mcbs / Bus Bar Shall Be Housed In A Separate Housing With On- Off Latches In The Housing. ( Location Sainik Institute ) 86 External Water Supply 87 Item No. 60 : M & L For Cutting Of Exiting 150 Mm Dia Ci / Di / Gi Pipe Line And Including Insert T Of 50 Mm Dia Branch Pipe Including Complete Earth Work End Joint As Specified & Directed. 88 Item No. 61 : M&L For Construction Of Brick Masonry Valve Pit Of Size 900 X 900 X 900 Mm ( Internal Dimension ) One Brick Thick Wall In Cm 1:4 On 100Mm Thick Pcc 1:4:8 Type D-2 ( 40Mm Graded Aggregate ) As In Foundation, And 15Mm Thick Rendering In Cement Mortar ( 1:4 ) Internally, Externally Up To 15Cm Below Gl, Providing Valve Pit Cover Made Of 3Mm Thick Ms Sheet / Plate, Welded Including Provision Of Hinges, Handle And Locking Arrangement Including 40 X 40 X 6Mm Angle Iron Frame Fixed On Top Of Valve Pit By Means Of Hold Fast 150Mm Long, Embedded In Pcc Block 1:2:4 Type B-1 ( 20Mm Graded Aggregate ) Of Size 230 X 200 X 100Mm, Including Two Coats Of Anti-Corrosive Paint Over A Coat Of Red Oxide Zinc Chrome Primer And Necessary Earth Work In Soft / Loose Soil Complete All As Specified & Directed.
Basic Detail
Tender No CE CHZ/PAT/T-11/2021-22
Bidding Type Tender
Location
City PATIALA
State Punjab
Key Dates
Publish Date 11 Sep 2021
Submission Date 18 Sep 2021
Open Date 21 Sep 2021
Finance
Tender Value 3.75 Crore
Tender Fee 2000
EMD 4.50 Lakhs
Exemption Not Available
Document List
SainikInstIntegirty.pdf
MERGESAINIK.pdf
BOQ_511394.xls
TDSTDSAINIK.rar
30C71E73-D6C4-4DAC-85A0-BE0A709C4BDC.html
SAINIKINSTPATSTRPDFDRG.rar
Tendernotice_1.pdf
strpdfdRG1.rar

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Sep 11, 2021
11:30 IST

Tender Published

Tender notice published.

Completed
Sep 01, 2021
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Completed
Sep 01, 2021
18:00 IST

Corrigendum-2 Issued

Clarifications on tender conditions and amendments issued.

Completed
Sep 01, 2021
18:00 IST

Corrigendum-3 Issued

Clarifications on tender conditions and amendments issued.

Completed
Sep 01, 2021
18:00 IST

Corrigendum-4 Issued

Clarifications on tender conditions and amendments issued.

Completed
Sep 01, 2021
18:00 IST

Corrigendum-5 Issued

Clarifications on tender conditions and amendments issued.

Completed
Sep 01, 2021
18:00 IST

Corrigendum-6 Issued

Clarifications on tender conditions and amendments issued.

Completed
Sep 01, 2021
18:00 IST

Corrigendum-7 Issued

Clarifications on tender conditions and amendments issued.

Completed
Sep 01, 2021
18:00 IST

Corrigendum-8 Issued

Clarifications on tender conditions and amendments issued.

Completed
Sep 01, 2021
18:00 IST

Corrigendum-9 Issued

Clarifications on tender conditions and amendments issued.

Completed
Sep 01, 2021
18:00 IST

Corrigendum-10 Issued

Clarifications on tender conditions and amendments issued.

Completed
Sep 01, 2021
18:00 IST

Corrigendum-11 Issued

Clarifications on tender conditions and amendments issued.

Completed
Sep 11, 2021
18:00 IST

Corrigendum-12 Issued

Clarifications on tender conditions and amendments issued.

Completed
Sep 11, 2021
18:00 IST

Corrigendum-13 Issued

Clarifications on tender conditions and amendments issued.

Completed
Sep 18, 2021
18:00 IST

Corrigendum-14 Issued

Clarifications on tender conditions and amendments issued.

Completed
Sep 18, 2021
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Sep 21, 2021

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
pdf

SainikInstIntegirty.pdf

pdf

MERGESAINIK.pdf

xls

BOQ_511394.xls

rar

TDSTDSAINIK.rar

html

30C71E73-D6C4-4DAC-85A0-BE0A709C4BDC.html

rar

SAINIKINSTPATSTRPDFDRG.rar

pdf

Tendernotice_1.pdf

rar

strpdfdRG1.rar

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders