Agriculture Cooperative Closing in 0 days TDR #28478579

Purchase Of Instrumentation Spares .

Issued by Cooperative · THE MEHAM COOP. SUGAR MILLS, Haryana
Tender Value
Ref. Documents
Estimated cost
Bid Submission
23 Jul 2021
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
100
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
THE MEHAM COOP. SUGAR MILLS → Haryana
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Purchase Of Instrumentation Spares . - 2 Microprocessor Based Digital Scanner Input - Universal, 16 Channel Power Supply - 230 Vac Size - 48 X 96 Nmodel – 85Xx+ Note - This Scanner Have Provision For Individual Calibration Mode For Each Channel And For Same Input. N 3 Digital Rpm Indicator, Model - Rp4d5, I / P - Proximity Sensor Pnp - No, O / P - 4 To 20 Ma, P.S. - 220 Vac 4 Signal Isolator Ni / P – 4 To 20 Ma, No / P – 0 To 10 Vdc Dual Np.S. – 220 Vac N 5 Signal Isolator Ni / P – 0 To 10 Vdc No / P – 4 To 20 Ma Dual Np.S. – 220 Vac N 6 Signal Isolator Ni / P – 4 To 20 Ma, No / P – 4 To 20 Ma Dual Out Put Np.S. – 220 Vac N24 Vtps N 7 Signal Isolator Ni / P – 4 To 20 Ma, No / P – 4 To 20 Ma 4Th Out Put Np.S. – 220 Vac N N 8 Microprocessor Based Digital Auto – Manual Station. I / P – 4 To 20 Ma O / P – 4 To 20 Ma P.S. – 230 Vac. 9 Microprocessor Based Digital Auto – Manual Station. I / P – 4 To 20 Ma O / P – 0 To 10 Vdc P.S. – 230 Vac. 10 Microprocessor Based Digital Flow Indicator Totalizer , Model – 1008 Ni / P – 4 To 20 Ma No / P – 4 To 20 Ma, 24 Vdc Np.S.- 220 Vac. Size – 96 X 96 Mm2 N 11 K Type Thermocouple Compensating Cable, Red Colour 12 Air Filter Regulator With Pressure Gauge, Connection – ¼”, Range – 0 To 7 Kg / Cm2 13 Proximity Sensor Pnp - No, Model - 18D Flash / Nf, Sensing Range - 5 / 8 Mm, Volt - 10 To 40 Vdc, Max. Load - 300 Ma. 14 Stem Type Temperature Gauges, Complete Ss Body, Ss Bourdon Tube & Ss Mechanism, Connection Thread 1 / 2 Bsp, Dial Size - 6, Sensor Dia - 9 Mm, Sensor Length - 12, Sensor Bulb Type, Sensor Bulb Dia - 10 Mm, Range - 0 To 200°C. 15 Stem Type Temperature Gauges, Complete Ss Body, Ss Bourdon Tube & Ss Mechanism, Connection Thread 1 / 2 Bsp, Dial Size - 6, Sensor Dia - 9 Mm, Sensor Length - 12, Sensor Bulb Type, Sensor Bulb Dia - 10 Mm, Range - 0 To 400°C. 16 Pressure Gauges, Complete Ss Body, Ss Bourdon Tube & Ss Mechanism, Bottom End Connection, Connection Thread – 1 / 2 Bsp, Dial Size - 6 Range - 0 To 2.5 Kg / Cm² 17 Pressure Gauges, Complete Ss Body, Ss Bourdon Tube & Ss Mechanism, Bottom End Connection, Connection Thread – 3 / 8 Bsp, Dial Size - 6 Range - 0 To 10 Kg / Cm² 18 Pressure Gauges, Complete Ss Body, Ss Bourdon Tube & Ss Mechanism, Bottom End Connection, Connection Thread –3 / 8 Bsp, Dial Size - 6 Range - 0 To 7 Kg / Cm² 19 Pressure Gauges, Complete Ss Body, Ss Bourdon Tube & Ss Mechanism, Bottom End Connection, Connection Thread – 1 / 2 Bsp, Dial Size - 6 Range - 0 To 70 Kg / Cm² 20 Recorder Chart As Per Sample – 0 To 100 % 21 Load Cell 110 Kg. 22 Spare Kit For Coarse Feed Cylinder Size - 1½ X 100 Mm 23 Spare Kit For Fine Feed Cylinder Size - 1½ X 100 Mm 24 Spare Kit For Load Bucket ( Discharge ) Cylinder Size - 1½ X 200 Mm 25 Spare Kit For Bag Clamp Cylinder Size - 3 X 100 Mm 26 Spare Kit For 5 Port Solenoid Valve. 27 Fine Feed Cylinder – 1.1 / 2” X 100 Mm With Forque And Tuntion. 28 Coarse Feed Cylinder – 1.1 / 2” X 100 Mm With Forque And Tuntion. 29 Discharge Cylinder – 1.1 / 2” X 200 Mm With Forque And Tuntion. 30 Bag Clamp Cylinder – 3” X 100 Mm With Forque And Tuntion. 31 Leather Belt For Bag Clamp 32 5 Port Solenoid Valve 33 Smps, 24 Vdc, 4 Amp. 34 Air Drier Controller 35 Solenoid Valve With Solenoid Coil, 3 / 2 Nc, Model – Em612a, Max. Press. 10 Bar, Nw – 2, Volt. 220 Vac. 36 Manifold Suitable For 5 Port Solenoid Valve. 37 L - Connector Push Pull Type Size - 1 / 4 X 6 Mm 38 Straight Connector Push Pull Type Size - 1 / 4 X 6 Mm 39 Tee Connector Push Pull Type Size - 1 / 4 X 6 Mm 40 Flow Control Valve Size - 1 / 4 X 6 Mm 41 Pvc Pipe, Id - 6 Mm, Od - 8 Mm, Max. Air Pressure - 10 Bar, Blue Clour 42 Repairing Of Mettler Toledo Make Controller Panther C750, S / N B00843816gk. 43 Repairing, Testing & Calibration Of Digital Scanner. Model – 85Xx+ 44 Amc Of Auto Sugar Weighing & Bagging Machines For Season 2021-22 . 45 Re-Commissioning Of Plc & Hmi Based ( Plc Ml-1400 ) Boiler Control System With Complete Calibration Of Complete System & All Field Instruments For Season 2021-22. 46 Re-Commissioning Of Plc & Scada Based ( Plc Ac- 500 ) Acfc System With Complete Calibration Of Complete System & All Field Instruments For Season 2021-22.

BOQ

Name of Work: Instrumentation spares
Sl.No.Item DescriptionItem Code / MakeQuantityUnits
11Instrumentation spares
21.001Microprocessor based digital scanner Input - Universal, 16 channel Power supply - 230 VAC size - 48 x 96\nModel – 85XX+ Note - This scanner have provision for individual calibration mode for each channel and for same input.\n1 Masibus1Nos.
31.002Digital rpm indicator, model - RP4D5, I/P - proximity sensor PNP - NO, O/P - 4 to 20 mA, P.S. - 220 VAC2 Tap2Nos.
41.003Signal Isolator\nI/P – 4 to 20 mA,\nO/P – 0 to 10 VDC dual\nP.S. – 220 VAC \n3 Masibus/ Rishab2Nos.
51.004Signal Isolator\nI/P – 0 to 10 VDC\nO/P – 4 to 20 mA dual\nP.S. – 220 VAC \n4 Masibus/ Rishab2Meter.
61.005Signal Isolator\nI/P – 4 to 20 mA,\nO/P – 4 to 20 mA Dual out put\nP.S. – 220 VAC \n24 VTPS\n5 Masibus3Nos.
71.006Signal Isolator\nI/P – 4 to 20 mA,\nO/P – 4 to 20 mA 4th out put\nP.S. – 220 VAC\n\n6 Masibus3Nos.
81.007Microprocessor Based Digital Auto – Manual Station. I/P – 4 to 20 mA O/P – 4 to 20 mA P.S. – 230 VAC.7 AICS2Nos.
91.008Microprocessor Based Digital Auto – Manual Station. I/P – 4 to 20 mA O/P – 0 to 10 VDC P.S. – 230 VAC.8 AICS/ Masibus2Nos.
101.009Microprocessor based digital flow indicator totalizer , model – 1008\nI/P – 4 to 20 mA\nO/P – 4 to 20 mA, 24 VDC\nP.S.- 220 VAC. Size – 96 x 96 mm2\n9 Masibus2Nos.
111.01K type thermocouple compensating cable, Red colour10 GIC/ Any IS1Nos.
121.011Air Filter Regulator with pressure gauge, Connection – ¼”, Range – 0 to 7 kg/ cm211 Janatics2Nos.
131.012Proximity sensor PNP - NO, Model - 18D flash/NF, Sensing range - 5/8 mm, Volt - 10 to 40 VDC, Max. Load - 300 mA.12 Tap15Nos.
141.013Stem type temperature gauges, complete SS body, SS bourdon tube & SS mechanism, connection thread 1/2\" BSP, Dial size - 6\", sensor dia - 9 mm, sensor length - 12\", sensor bulb type, sensor bulb dia - 10 mm, Range - 0 to 200°C.13 General Instrument20Set.
151.014Stem type temperature gauges, complete SS body, SS bourdon tube & SS mechanism, connection thread 1/2\" BSP, Dial size - 6\", sensor dia - 9 mm, sensor length - 12\", sensor bulb type, sensor bulb dia - 10 mm, Range - 0 to 400°C.14 General Instrument5Nos.
161.015Pressure gauges, complete SS body, SS bourdon tube & SS mechanism, Bottom end connection, connection thread – 1/2\" BSP, dial size - 6\" Range - 0 to 2.5 kg/cm²15 General Instrument5Nos.
171.016Pressure gauges, complete SS body, SS bourdon tube & SS mechanism, Bottom end connection, connection thread – 3/8\" BSP, dial size - 6\" Range - 0 to 10 kg/cm²16 General Instrument8Nos.
181.017Pressure gauges, complete SS body, SS bourdon tube & SS mechanism, Bottom end connection, connection thread –3/8\" BSP, dial size - 6\" Range - 0 to 7 kg/cm²17General Instrument6Nos.
191.018Pressure gauges, complete SS body, SS bourdon tube & SS mechanism, Bottom end connection, connection thread – 1/2\" BSP, dial size - 6\" Range - 0 to 70 kg/cm²18 General Instrument3Nos.
201.019Recorder Chart as per sample – 0 to 100 %19 Any IS300Nos.
211.02Load Cell 110 kg.20 Sensotronics.2Nos.
221.021Spare kit for coarse feed cylinder size - 1½\" x 100 mm21 Schrader2Nos.
231.022Spare kit for fine feed cylinder size - 1½\" x 100 mm22 Schrader2Nos.
241.023Spare kit for load bucket (Discharge) cylinder size - 1½\" x 200 mm23 Schrader4Nos.
251.024Spare kit for Bag clamp cylinder size - 3\" x 100 mm24 Schrader4Nos.
261.025Spare kit for 5 port solenoid valve.25 Schrader10Nos.
271.026Fine feed cylinder – 1.1/2” x 100 mm with forque and tuntion.26 Schrader1Nos.
281.027Coarse feed cylinder – 1.1/2” x 100 mm with forque and tuntion.27 Schrader1Nos.
291.028Discharge cylinder – 1.1/2” x 200 mm with forque and tuntion.28 Schrader2Nos.
301.029Bag Clamp cylinder – 3” x 100 mm with forque and tuntion.29 Schrader2Nos.
311.03Leather belt for bag clamp30 Local4Nos.
321.0315 port solenoid valve31 Janatics6Nos.
331.032SMPS, 24 VDC, 4 Amp.32 Mean well2Nos.
341.033Air Drier Controller33 Vigital India1Nos.
351.034Solenoid valve with solenoid coil, 3/2 NC, model – EM612A, max. press. 10 bar, NW – 2, Volt. 220 VAC.34 Janatics.3Nos.
361.035Manifold suitable for 5 port solenoid valve.35 Janatics.2Nos.
371.036L - connector push pull type size - 1/4\" x 6 mm36 Janatics25Nos.
381.037Straight connector push pull type size - 1/4\" x 6 mm37 Janatics25Nos.
391.038Tee connector push pull type size - 1/4\" x 6 mm38 Janatics25Nos.
401.039Flow control valve size - 1/4\" x 6 mm39 Janatics25Nos.
411.04PVC pipe, ID - 6 mm, OD - 8 mm, Max. air pressure - 10 Bar, Blue clour40 Local1Nos.
421.041Repairing of METTLER TOLEDO make Controller PANTHER C750, S/N B00843816GK.41 Mettler Toledo1Nos.
431.042Repairing, testing & Calibration of Digital Scanner. Model – 85XX+42 Masibus.1Nos.
441.043AMC of Auto Sugar weighing & Bagging machines for season 2021-22 .43 Local2Nos.
451.044Re-Commissioning of PLC & HMI based (PLC ML-1400) Boiler Control System with complete calibration of complete system & all field instruments for season 2021-22.44 Allen Bradley\n( Rockwell Automation)\nRate per day basis.1Nos.
461.045Re-Commissioning of PLC & SCADA based (PLC AC- 500) ACFC System with complete calibration of complete system & all field instruments for season 2021-22.45 ABB Rate per day basis.1Nos.

AI Tender Summary

OUR REF NO 28478579
AUTHORITY Cooperative
TENDER VALUE Ref. Documents
LAST DATE 23-07-2021
Authority
Authority Name Meham Cooperative Sugar Mills Limited
Work Description Purchase Of Instrumentation Spares . - 2 Microprocessor Based Digital Scanner Input - Universal, 16 Channel Power Supply - 230 Vac Size - 48 X 96 Nmodel – 85Xx+ Note - This Scanner Have Provision For Individual Calibration Mode For Each Channel And For Same Input. N 3 Digital Rpm Indicator, Model - Rp4d5, I / P - Proximity Sensor Pnp - No, O / P - 4 To 20 Ma, P.S. - 220 Vac 4 Signal Isolator Ni / P – 4 To 20 Ma, No / P – 0 To 10 Vdc Dual Np.S. – 220 Vac N 5 Signal Isolator Ni / P – 0 To 10 Vdc No / P – 4 To 20 Ma Dual Np.S. – 220 Vac N 6 Signal Isolator Ni / P – 4 To 20 Ma, No / P – 4 To 20 Ma Dual Out Put Np.S. – 220 Vac N24 Vtps N 7 Signal Isolator Ni / P – 4 To 20 Ma, No / P – 4 To 20 Ma 4Th Out Put Np.S. – 220 Vac N N 8 Microprocessor Based Digital Auto – Manual Station. I / P – 4 To 20 Ma O / P – 4 To 20 Ma P.S. – 230 Vac. 9 Microprocessor Based Digital Auto – Manual Station. I / P – 4 To 20 Ma O / P – 0 To 10 Vdc P.S. – 230 Vac. 10 Microprocessor Based Digital Flow Indicator Totalizer , Model – 1008 Ni / P – 4 To 20 Ma No / P – 4 To 20 Ma, 24 Vdc Np.S.- 220 Vac. Size – 96 X 96 Mm2 N 11 K Type Thermocouple Compensating Cable, Red Colour 12 Air Filter Regulator With Pressure Gauge, Connection – ¼”, Range – 0 To 7 Kg / Cm2 13 Proximity Sensor Pnp - No, Model - 18D Flash / Nf, Sensing Range - 5 / 8 Mm, Volt - 10 To 40 Vdc, Max. Load - 300 Ma. 14 Stem Type Temperature Gauges, Complete Ss Body, Ss Bourdon Tube & Ss Mechanism, Connection Thread 1 / 2 Bsp, Dial Size - 6, Sensor Dia - 9 Mm, Sensor Length - 12, Sensor Bulb Type, Sensor Bulb Dia - 10 Mm, Range - 0 To 200°C. 15 Stem Type Temperature Gauges, Complete Ss Body, Ss Bourdon Tube & Ss Mechanism, Connection Thread 1 / 2 Bsp, Dial Size - 6, Sensor Dia - 9 Mm, Sensor Length - 12, Sensor Bulb Type, Sensor Bulb Dia - 10 Mm, Range - 0 To 400°C. 16 Pressure Gauges, Complete Ss Body, Ss Bourdon Tube & Ss Mechanism, Bottom End Connection, Connection Thread – 1 / 2 Bsp, Dial Size - 6 Range - 0 To 2.5 Kg / Cm² 17 Pressure Gauges, Complete Ss Body, Ss Bourdon Tube & Ss Mechanism, Bottom End Connection, Connection Thread – 3 / 8 Bsp, Dial Size - 6 Range - 0 To 10 Kg / Cm² 18 Pressure Gauges, Complete Ss Body, Ss Bourdon Tube & Ss Mechanism, Bottom End Connection, Connection Thread –3 / 8 Bsp, Dial Size - 6 Range - 0 To 7 Kg / Cm² 19 Pressure Gauges, Complete Ss Body, Ss Bourdon Tube & Ss Mechanism, Bottom End Connection, Connection Thread – 1 / 2 Bsp, Dial Size - 6 Range - 0 To 70 Kg / Cm² 20 Recorder Chart As Per Sample – 0 To 100 % 21 Load Cell 110 Kg. 22 Spare Kit For Coarse Feed Cylinder Size - 1½ X 100 Mm 23 Spare Kit For Fine Feed Cylinder Size - 1½ X 100 Mm 24 Spare Kit For Load Bucket ( Discharge ) Cylinder Size - 1½ X 200 Mm 25 Spare Kit For Bag Clamp Cylinder Size - 3 X 100 Mm 26 Spare Kit For 5 Port Solenoid Valve. 27 Fine Feed Cylinder – 1.1 / 2” X 100 Mm With Forque And Tuntion. 28 Coarse Feed Cylinder – 1.1 / 2” X 100 Mm With Forque And Tuntion. 29 Discharge Cylinder – 1.1 / 2” X 200 Mm With Forque And Tuntion. 30 Bag Clamp Cylinder – 3” X 100 Mm With Forque And Tuntion. 31 Leather Belt For Bag Clamp 32 5 Port Solenoid Valve 33 Smps, 24 Vdc, 4 Amp. 34 Air Drier Controller 35 Solenoid Valve With Solenoid Coil, 3 / 2 Nc, Model – Em612a, Max. Press. 10 Bar, Nw – 2, Volt. 220 Vac. 36 Manifold Suitable For 5 Port Solenoid Valve. 37 L - Connector Push Pull Type Size - 1 / 4 X 6 Mm 38 Straight Connector Push Pull Type Size - 1 / 4 X 6 Mm 39 Tee Connector Push Pull Type Size - 1 / 4 X 6 Mm 40 Flow Control Valve Size - 1 / 4 X 6 Mm 41 Pvc Pipe, Id - 6 Mm, Od - 8 Mm, Max. Air Pressure - 10 Bar, Blue Clour 42 Repairing Of Mettler Toledo Make Controller Panther C750, S / N B00843816gk. 43 Repairing, Testing & Calibration Of Digital Scanner. Model – 85Xx+ 44 Amc Of Auto Sugar Weighing & Bagging Machines For Season 2021-22 . 45 Re-Commissioning Of Plc & Hmi Based ( Plc Ml-1400 ) Boiler Control System With Complete Calibration Of Complete System & All Field Instruments For Season 2021-22. 46 Re-Commissioning Of Plc & Scada Based ( Plc Ac- 500 ) Acfc System With Complete Calibration Of Complete System & All Field Instruments For Season 2021-22.
Basic Detail
Tender No MSM/PUR/2021/068
Bidding Type Tender
Location
City THE MEHAM COOP. SUGAR MILLS
State Haryana
Key Dates
Publish Date 12 Jul 2021
Submission Date 23 Jul 2021
Open Date 23 Jul 2021
Finance
Tender Value Ref. Documents
Tender Fee 100
EMD Ref. Documents
Exemption Not Available
Document List
Tendernotice_1.pdf
BOQ_237638.xls
78E6E2A9-A670-418A-82A8-2F5BD977909B.html

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 12, 2021
11:30 IST

Tender Published

Tender notice published.

Completed
Jul 23, 2021
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Jul 23, 2021

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
pdf

Tendernotice_1.pdf

xls

BOQ_237638.xls

html

78E6E2A9-A670-418A-82A8-2F5BD977909B.html

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders