Repair Maint Of Internal Electrification And Certain Allied Works At 733 Eme Wksp 853 Asc 877 At Mule Asc Bn And 29 Mob Fvh At U Area Under Age Em Of Ge Sukna
Tender Value
47 Lakhs
Estimated cost
Bid Submission
20 Jul 2021
0 days left
EMD
94000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sukna → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair Maint Of Internal Electrification And Certain Allied Works At 733 Eme Wksp 853 Asc 877 At Mule Asc Bn And 29 Mob Fvh At U Area Under Age Em Of Ge Sukna
BOQ
| Name of Work : REPAIR / MAINT OF INTERNAL ELECTRIFICATION AND CERTAIN ALLIED WORKS AT 733 EME WKSP, 853 ASC, 877 AT MULE ASC BN AND 29 MOB FVH AT U AREA UNDER AGE E/M OF GE SUKNA | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | M&L point wiring with 1.5 sqmm single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including PVC casing caping (double lock pattern) and accessories on wall / ceiling surfaces etc. with and including 1.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) with cast Iron / pressed steel terminal boxes 60 mm deep, on walls with 3 mm thick plastic laminated / hylam sheet cover, fixed on wall / other surfaces with brass screws for mounting or housing switches, socket outlets, fan regulators, etc including all other fixing accessories for one light / fan / exhaust fan point controlled by one 5 / 6 Amps switch and including taking down complete all as specified and directed.\nMake of cable :- Havells / KEI / Polycab / RR Kabel Ltd. / HPL\nMake of PVC casing caping:- Richa Cables / AKG Industries / Harsh Electro Systems\n | 480 | Per Point | |
| 2 | 2 | All as per Sl. item No. 1 above but for one 5 / 6 Amps socket outlet point on the same board.\n | 30 | Per Point | |
| 3 | 3 | All as per Sl. item No. 1 above but for one 5 / 6 Amps socket outlet point on independent board.\n | 100 | Per Point | |
| 4 | 4 | All as per Sl. item No. 1 above but for one 5 / 6 Amps socket outlet point on independent board but below the switch board of light points in the same vertical plane.\n | 30 | Per Point | |
| 5 | 5 | All as per Sl. item No. 1 above but for one light point controlled by two, 2 - way switches.\n | 10 | Per Point | |
| 6 | 6 | M&L point wiring with 2.5 sqmm single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including PVC casing caping (double lock pattern) and accessories on wall / ceiling surfaces etc. with and including 2.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) with cast Iron / pressed steel terminal boxes 60 mm deep, on walls with 3 mm thick plastic laminated / hylam sheet cover, fixed on wall / other surfaces with brass screws for 15 / 16 Amps socket outlet on independent board and including taking down complete all as specified and directed.\nMake of cable :- Havells / KEI / Polycab / RR Kabel Ltd. / HPL\nMake of PVC casing caping:- Richa Cables / AKG Industries / Harsh Electro Systems\n | 100 | Per Point | |
| 7 | 7 | M&L point wiring with 1.5 sqmm single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including non-metallic, rigid non mettalic PVC conduit (medium grade) concealed in wall / ceiling with and including 1.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) with cast Iron / pressed steel terminal boxes 60 mm deep, on walls with 3 mm thick plastic laminated / hylam sheet cover, fixed on wall / other surfaces with brass screws for mounting or housing switches, socket outlets, fan regulators, etc. including all other fixing accessories for one light / fan / exhaust fan / call bell point controlled by one 5 / 6 Amps switch and including cutting chasing (as required) and making good surfaces to match with adjoining surface & including taking down complete all as specified and directed.\nMake of cable:- Havells / KEI / Polycab / RR Kabel Ltd. / HPL\nMake of PVC Conduit:- Richa Cables / AKG Industries / Harsh Electro Systems / Panasonic (Anchor)\n | 260 | Per Point | |
| 8 | 8 | All as per Sl. item No. 7 above but for one 5 / 6 Amps socket outlet point on independent board.\n | 30 | Per Point | |
| 9 | 9 | M&L point wiring with 2.5 sqmm single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including non-metallic, rigid non mettalic PVC conduit (medium grade) concealed in wall / ceiling with and including 2.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) with cast Iron / pressed steel terminal boxes 60 mm deep, on walls with 3 mm thick plastic laminated / hylam sheet cover, fixed on wall / other surfaces with brass screws for 15 / 16 Amps socket outlet on independent board and including cutting chasing (as required) and making good surfaces to match with adjoining surface and including taking down complete all as specified and directed.\nMake of cable:- Havells / KEI / Polycab / RR Kabel Ltd. / HPL\nMake of PVC Conduit:- Richa Cables / AKG Industries / Harsh Electro Systems / Panasonic (Anchor)\n | 30 | Per Point | |
| 10 | 10 | S&F switch piano flush type one way, 5 / 6 Amps, 240 volt complete all as specified and directed.\nMake :- Havells / Anchor / Legrand\n | 730 | Each | |
| 11 | 11 | All as per item No. 10 above but two way switch.\n\n | 20 | Each | |
| 12 | 12 | S&F socket outlet 5 pin 5 / 6 Amps, 240 volts complete all as specified and directed. \nMake :- Havells / Anchor / Legrand\n | 30 | Each | |
| 13 | 13 | S&F switch socket combination 5 pin, 5 / 6 Amp, flush type complete all as specified and directed.\nMake :- Havells / Anchor / Legrand\n | 160 | Each | |
| 14 | 14 | S&F switch socket combination 2 in 1, 6 Pin, 5 & 15 Amp, flush type universal complete all as specified and directed.\nMake :- Havells / Anchor / Legrand\n | 130 | Each | |
| 15 | 15 | S&F bell push one way, 5/6 Amp, 240 V complete all as specified and directed.\nMake :- Havells / Anchor / Legrand\n | 40 | Each | |
| 16 | 16 | S&F call bell, ding dong, AC 240 V, single pole complete all as specified and directed.\nMake :- Havells / Anchor / Legrand\n | 40 | Each | |
| 17 | 17 | S&F ceiling rose, surface bakelite 65 x 50 mm three terminal complete all as specified and directed.\nMake:- Havells / Anchor / Legrand\n | 450 | Each | |
| 18 | 18 | S&F stepped type electronic fan regulator two module, with 5 step, AC 50 Hz 240 Volts grade complete all as specified and directed.\nMake :- Havells / Anchor / Legrand\n | 110 | Each | |
| 19 | 19 | S&F angular lamp holder, PVC / Polycarbonate type with back plate for fixing of retrofit lamp 240 volt including taking down complete all as specified and as directed.\nMake :- Havells / Anchor / Legrand\n | 145 | Each | |
| 20 | 20 | S&F MCB SP 6 to 32 Amp, 10 kA, 240V 'C' curve complete all as specified and as directed. \nMake :- L&T / Havells (Brand-Max³, EURO-II) / Panasonic / Hager / ABB / Legrand\n | 230 | Each | |
| 21 | 21 | All as per items No 20 above but MCB SPN.\n\n | 75 | Each | |
| 22 | 22 | All as per items No 20 above but MCB TPN 40 to 63 Amp.\n | 12 | Each | |
| 23 | 23 | S & F blanking plate suitable for distribution boards complete all as specified and directed.\nMake :- L&T / Havells / Panasonic / Hager / ABB / Legrand\n | 150 | Each | |
| 24 | 24 | S&F sheet metal enclosure suitable for MCB, SPN 2 way, without bus bar and including taking down, fixing flush to wall & making good the disturbed surfaces complete all as specified and as directed.\nMake :- L&T / Havells / Panasonic / Hager / ABB / Legrand\n | 10 | Each | |
| 25 | 25 | S&F metal plug and socket DB, double pole 240 volts and including one 20 Amp MCB SPN, C-Curve & including taking down complete all as specified and directed. \nMake :- L&T / Havells / Panasonic / Hager / ABB / Legrand\n | 10 | Each | |
| 26 | 26 | S&F MCB DB, SPN 6 way, IP-30, IK09, single door type, with 100A copper neutral and earth bus bar for fixing MCB including taking down, fixed flush to wall & making good the disturbed surfaces complete all as specified and directed.\nMake:- L&T / Havells / Panasonic / Hager / ABB / Legrand\n | 25 | Each | |
| 27 | 27 | All as per items No 26 above but 8 way\n\n | 20 | Each | |
| 28 | 28 | All as per items No 26 above but 12 way\n\n | 15 | Each | |
| 29 | 29 | S&F VTPN DB, 4 way, IP-30, IK 08, single door type, with 250 A copper neutral and earth bus bar, suitable for fixing upto 160 Amp MCCBs as incomer and including taking down, fixing flush to wall & making good the disturbed surfaces complete all as specified and as directed.\nMake :- L&T / Havells / Panasonic / Hager / ABB / Legrand\n | 5 | Each | |
| 30 | 30 | All as per items No 29 above but 6 way\n\n | 5 | Each | |
| 31 | 31 | S&F MCCB 4 pole 100 Amps breaking capacity 16 KA, Ics = 100% Icu including spreader link complete all as specified and directed. \nMake :- L&T / Havells (Brand- HIM & HIX) / Panasonic / Hager / ABB / Legrand\n | 5 | Each | |
| 32 | 32 | All as per items No 31 above but 125 Amps\n\n | 5 | Each | |
| 33 | 33 | M & L for sub main wiring with 2 runs of 2.5 Sqmm main wire alongwith 1 run of 2.5 Sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade copper conductor cable, drawn through and including adequate size PVC casing caping (double lock pattern) with all fittings & accessories on walls / ceiling surfaces etc., including taking down complete all as specified and directed.\nNOTE :- Two runs of main copper conductor, one run of earth wire and one run of PVC casing caping shall be measured as one unit length.\nMake of cable :- Havells / KEI / Polycab / RR Kabel Ltd. / HPL\nMake of PVC casing caping:- Richa Cables / AKG Industries / Harsh Electro Systems\n\n | 450 | RM | |
| 34 | 34 | All as per item No. 33 above but with 2 runs of 4 sqmm main wire along with 1 run of 4 sqmm earth wire.\n\n | 500 | RM | |
| 35 | 35 | All as per item No. 33 above but with 2 runs of 6 sqmm main wire along with 1 run of 6 sqmm earth wire.\n\n | 400 | RM | |
| 36 | 36 | All as per item No. 33 above but with 2 runs of 10 sqmm main wire along with 1 run of 10 sqmm earth wire.\n\n | 300 | RM | |
| 37 | 37 | S&F LED light fitting 1 x 18 / 20 watt batten type 230 Volts, 4 feet long, extruded polycarbonate housing & extruded polycarbonate diffuser, suitable for surface mounting, Lumen Efficacy 100 Lm/Watt (minimum), colour temperature 5700K (minimum), CRI 80 (minimum), IP 20, PF 0.90 (minimum), THD 20% (Maximum), with in-built electrnoic driver with APFC, in-built surge protection 2 KV (minimum) inlcuding all fixing arrangement, electrically connecting from ceiling rose to light fitting & including taking down complete all as specified and directed.\nMake:- Indiabulls LED / C&S / Crompton / Surya\n | 450 | Each | |
| 38 | 38 | S&F LED light fitting 1 x 9 / 10 watt, 230 Volts, 2 feet long, extruded aluminium housing & extruded polycarbonate diffuser, suitable for surface mounting, system efficacy 100 Lm/watt (minimum), colour temperature 5700K (minimum), CRI 80 (minimum), PF 0.90 (minimum), THD 10% (Maximum), with integrated high effeciency electrnoic driver with APFC, in-built surge protection 5 KV (minimum) inlcuding all fixing arrangement, electrically connecting from ceiling rose to light fitting & taking down complete all as specified and directed.\nMake:- Indiabulls LED / C&S / Crompton / Surya\n\n | 47 | Each | |
| 39 | 39 | S&F 9 / 10 watt LED Bulk head fitting including electronic driver and SMD LED lamp, polycarbonate housing & opal polycarbonate diffuser, Lumen Efficacy 100 Lm / watt (minimum), colour temperature 5700K (minimum), CRI 80 (minimum), IP-65, PF 0.95 (minimum), THD 10% (maximum), in-built surge protection 5 KV (minimum) and including electrically connecting from celing rose to light fitting and taking down complete all as specified and directed.\nMake:- Indiabulls LED / C&S / Crompton / Surya\n\n | 170 | Each | |
| 40 | 40 | S&F 1 x 34 / 36 watt, LED Panel light fitting, square shape (2 x 2 ft), suitable for recess mounting in ceiling, epoxy white powder coated, die cast aluminium housing & opal acrylic diffuser, colour temperature 5700 K (minimum), 230 Volts, total system lumen 3600 Lm (minimum), CRI 80 (minimum), IP 20, PF 0.95 (minimum), THD 20% (Maximum), with integrated high effeciency electrnoic driver with APFC, inbuilt surge protection 2 KV (minimum), inlcuding electrically connecting & taking down complete all as specified and directed.\nMake:- Indiabulls LED / C&S / Crompton / Surya\n\n | 45 | Each | |
| 41 | 41 | S&F 1 x 15 / 16 watt, LED down light fitting, square shape, suitable for recess mounting, extruded polycarbonate housing & extruded polycarbonate diffuser, colour temperature 5700 K (minimum), 230 Volts, lumen efficacy 100 Lm/watt (minimum), CRI 80 (minimum), PF 0.90 (minimum), THD 20% (Maximum), with integrated high effeciency electrnoic driver with APFC, inbuilt surge protection 2 KV (minimum), inlcuding electrically connecting & taking down complete all as specified and directed.\nMake:- Indiabulls LED / C&S / Crompton / Surya\n | 85 | Each | |
| 42 | 42 | S&F 1 x 15 / 16 watt, LED suspended down light fitting, cylindrical round shape, suitable for suspended mounting with the help of 2 m (minimum) long suspension wire, epoxy powder coated die cast aluminium housing & clear glass diffuser, 230 Volts, colour temperature 5700 K (minimum), CRI 80 (minimum), PF 0.95 (minimum) and inlcuding electrically connecting & taking down complete all as specified and directed.\nMake:- Indiabulls LED / C&S / Crompton / Surya\n | 6 | Each | |
| 43 | 43 | S&F decorative wall mounted light fitting with in-built 1 x 6 watt LED with opal glass diffuser and including electrically connecting & taking down complete all as specified and directed.\nMake:- Indiabulls LED / C&S / Crompton / Surya\n | 30 | Each | |
| 44 | 44 | S&F LED batten light fitting 1 x 10 watt inverter (backup) type, 230 Volts, suitable for surface mounting, lithium ion battery with minimum 4 hrs backup time, extruded polycarbonate housing & extruded polycarbonate diffuser, lumen efficacy 100 Lm / watt (minimum), colour temperature 650 0K (minimum), CRI 80 (minimum), IP-20 (minimum), PF 0.90 (minimum), in-built surge protection 3.5 KV (minimum) inlcuding all fixing arragnement and electrically connecting from ceiling rose to light fitting & taking down complete all as specified and directed.\nMake:- Indiabulls LED / C&S / Crompton / Surya\n | 485 | Each | |
| 45 | 45 | S&F 9 watt LED bulb, inverter (backup) type, A19 shape with B22 base 230 Volts, battery with minimum 4 hrs backup time, frosted diffuser, suitable for surface mounting, total system lumen 900 Lm (minimum) on supply and 400 Lm (minimum) on battery, colour temperature 6500K (minimum), CRI 80 (minimum) & taking down complete all as specified and directed.\nMake:- Indiabulls LED / C&S / Crompton / Surya\n | 400 | Each | |
| 46 | 46 | S&F \"EXIT\" / \"ENTRY\" LED signage box of minimum size 325 x 425 x 365 mm with and including 6 watt LED inside, electrically connecting & taking down complete all as speficified and directed.\n | 5 | Each | |
| 47 | 47 | Note for Sl Item Nos. 35 to 44:- Contractor has to submit LM-79 & LM-80 and 3rd party NABL accredited lab test report for ALL LED fittings conforming to technical specifications beforesample approval.\n | |||
| 48 | 48 | S&F ceiling fan 1200 mm (minimum) sweep, BEE 5 star rated, with BLDC technology, AC single phase 230 V, 350 RPM, air delivery 220 m³/minute (minimum), with and including smart remote with long lasting batteries to control speed, multi pairing, timer and other intelligent memory functions, suspended from fan hook and including electrically connecting with twisted three core PVC insulated unsheathed flexible cord of 0.75 Sqmm copper conductor from ceiling rose to ceiling fan complete all as specified and directed.\nMake :- Havells, Model - EFFICIENCIA NEO or equivalent in Orient / Ram Ratna Electricals Ltd (RRE)\n | 110 | Each | |
| 49 | 49 | S&F exhaust fan 300 mm sweep, metal body, 1200 RPM (minimum), AC single phase, 230 V, 50Hz with bird guard, nuts, screws, bolts including electrical connection, writing MES number in 2 cm height with synthetic enamel paint complete all as specified and directed.\nMake:- Havells, Model - Ventil Air - DSP or equivalent in Orient / Ram Ratna Electricals Ltd (RRE)\n | 21 | Each | |
| 50 | 50 | S&F exhaust fan 250 mm sweep, non metallic plastic body, AC single phase, 230 V, 50Hz with & including self closing louvers, nuts, screws, bolts of specified sizes, electrical connection with twisted three core PVC insulated unsheathed flexible cord of size 0.75 sqmm copper conductor from ceiling rose to exhaust fan and writing MES number in 2 cm height with synthetic enamel paint complete all as specified and as directed.\nMake :- Havells, VentilAir - DX or equivalent in Orient / Ram Ratna Electricals Ltd (RRE)\nNote for Sl Item No 48 to 50:- The quoted rate is including for taking down and depositing old fan to MES store.\n | 15 | Each | |
| 51 | 51 | M&L earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick buried directly in ground in vertical position (earth pit not less than 2.25 m deep below the normal ground level) with top edge of the earth plate not less than 1.5 m below normal ground level, connected to galvanised earth lead wire of 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel, all as shown in electrical plate No. 3 connected to earthing test point and including dismantling complete all as specified and directed.\n\nNote:- The unit rate shall also include for earth work in any type of soil, PCC 1:3:6 type C1 chamber, RCC 1:1.5:3, type A1 cover slab, 50 mm thick reinforced with 8 mm dia TMT bar @ 140 mm C/C both ways, 10 mm dia plain bar lifting handle embedded in cover slab, 20 mm bore medium grade GI watering pipe, 15 mm bore GI light grade earth lead protection pipe, funnel, wire mesh, copper lugs, charcoal and common salt in alternate layer etc.\n | 18 | Each Set | |
| 52 | 52 | S&F in repairs earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4 mm dia galvanised iron or steel wire complete all as specified and directed.\n | 250 | RM | |
| 53 | 53 | S&F in repairs test point terminal block made of gun metal or phosphorus bronze size 75 x 75 x 25 mm drilled and screwed including 3 nos. 8 mm dia 25 mm long hex. head screw complete all as specified and directed.\n | 18 | Each | |
| 54 | 54 | S&F in repairs synthetic PVC insulator suitable for fixing earth continuity conductor on wall / roof with & including GI nuts, bolts and washers complete all as specified and directed.\n | 200 | Each |
AI Tender Summary
Tender Timeline
Jul 10, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 22, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender