Swami Keshwanand Rajasthan Agricultural University has published Renovation Of Stadium And Sports Facilities At Skrau Bikaner Including 3 Years Defect Liability Period. Submission Date for this Tender is 19-07-2021. Civil Work Tenders in Bikaner Rajasthan. Bidders can get complete Tender details and download the document.
| Name of Work : Renovation of Stadium & Sports facilities at S.K.R.A.U., Bikaner including 3 years defect liability period. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sum on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5 m , disposed earth to be levelled and neatly dressed: All kinds of soil | 28 | Cum | |
| 2 | 2 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. | 3840 | Sqm. | |
| 3 | 3 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sum on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils | 292 | Cum | |
| 4 | 4 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). | 3 | Cum | |
| 5 | 5 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size). | 49 | Cum | |
| 6 | 6 | Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in: Cement Mortar 1:6 ( 1-Cement : 6-Sand).\n | 274 | Cum | |
| 7 | 7 | Brick work with common burnt clay F.P.S.(Non Modular) bricks of class designation 10.0 in foundation and plinth with Cement mortar 1 : 6 (1 cement : 6 coarse sand) | 199 | Cum | |
| 8 | 8 | Brick work with common burnt clay F.P.S.(Non Modular) bricks of class designation 10.0 in foundation and plinth with Cement mortar 1 : 4 (1 cement : 4 coarse sand) | 9 | Cum | |
| 9 | 9 | Supplying and fixing machine cut fine dressed Red/Pink sand stone dasa or coping, with full moulding if required laid on cement mortar 1:4 including pointing with admixture of pigment matching with the stone shade 75 mm thick. | 17 | Sqm. | |
| 10 | 10 | Providing and fixing external grade board solid core single/ Double leaf flush door shutters IS: 2202(Part-II)1996 marked using Phenol formal dehyderesin in glue both sides with approved stainless steel fittings complete as per annexure 'A' : 30 mm thick Commercial Veneer both side. \n | 5 | Sqm. | |
| 11 | 11 | Brick work with Non modular flyash brick conforming to IS: 12894 :2002 of class designation 10.0 in superstructure above plinth level upto floor five level in. Cement mortar 1 : 6 (1 cement : 6 coarse sand) | 172 | Cum | |
| 12 | 12 | Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide | 2900 | Kg. | |
| 13 | 13 | Providing and fixing M.S. sheet 1mm thick single leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engg. incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paint | 10 | Sqm. | |
| 14 | 14 | Supplying and fixing of chain link fencing with angle iron posts 50x50x6mm placed at every 3 Mtr. apart 30cm in ground embedded in cement concrete 1:3:6 (30x30x45cm) corner and every tenth post to be strutted with (50 x 50 x 6cm) angle iron provided and fixed and fitted with posts including earth work in excavation etc. complete with chain link size. 75mm x 75mm x 3.15mm | 1458 | Sqm. | |
| 15 | 15 | P & F G.I. barbed wire line for fencing work with staples wire etc. | 3240 | Mtr. | |
| 16 | 16 | Stone slab roofing on ground floor with fine grained stone slab from aproved quarry (Soorsagar, Jodhpur) including filling of joints of parapet and slab on both sides in cement sand mortar 1 :4 with top 15Cm. thick lime concrete (40:100) terracing (as per BIKANER PRACTICE) including sandla ralthal, hemp and methi well tapping finished smooth polished surface in all respects in lime surkhimortar 1 : 2 with nails and wire and lime batta (gola) 75 mm x 75 mm and sandla etc. complete finished for span : Above 2.5 m and Upto 3.05 metre. | 16 | Sqm. | |
| 17 | 17 | 40mm thick marble chips flooring rubbed and polished to granolithic finish under layer 31mm thick cement concrete 1:2:4 (1 cement : 2 course sand : 4 graded stone aggregate 12.5mm nominal size) including fixing of dividing strip (excluding the cost of strips) and top layer 9mm thick with marble chips of approved colour & 4mm to 7mm nominal size laid in cement marble chips 2 : 3 (2 cement : 3 marble chips) by volume including cement slurry etc. complete Ordinary cement without any pigment. | 11 | Sqm. | |
| 18 | 18 | Marble chips skirting/dado rubbed and polished to granolithic finish 6mm thick with white marble chips of approved colour and size from smallest to 4mm nominal size laid in cement marble chips mix in proportion of 4:7(4 cement : 7 marble chips) by volume including fixing of dividing strips (excluding the cost of strips) complete in all respects :18mm thick with under layer of 12mm thick cement plaster 1:3 (1 cement : 3 coarse sand) : Ordinary cement without any pigment. | 22 | Sqm. | |
| 19 | 19 | Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish : 20 mm thick. | 3160 | Sqm. | |
| 20 | 20 | Colour washing of all shades to give an even shade including all scaffolding New work (two or more coats) with a base coat of white washing with lime | 3102 | Sqm. | |
| 21 | 21 | Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding. New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). | 1377 | Sqm. | |
| 22 | 22 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding: New work(Two or more coats) including prepartion of base with primer, putty, lippy etc complete in all respect. \n | 800 | Sqm. | |
| 23 | 23 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding: One or more coats on old work \n | 4600 | Sqm. | |
| 24 | 24 | Applying priming coat : With ready mix pink or gray primer of approved brand and manufacture on wood work hard and soft wood.\n | 60 | Sqm. | |
| 25 | 25 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on New Work \n | 460 | Sqm. | |
| 26 | 26 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : One or more coats on Old Work \n | 2400 | Sqm. | |
| 27 | 27 | Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead : With cement mortar 1 :4 ( 1 cement : 4 coarse sand) | 444 | Sqm. | |
| 28 | 28 | Renewing glass panes, with putty and nails wherever necessary: Float glass panes of thickness 4 mm | 20 | Sqm. | |
| 29 | 29 | Dismantling steel work in single sections including dismembering and stacking within 50 meters lead in: Channels, angles, tees & flats. \n | 480 | Kg. | |
| 30 | 30 | Dismantling barbed wire or chain link fencing including bending making rolls and stacking within 50-meter lead. | 700 | Kg. | |
| 31 | 31 | Providing & fixing precast cement concrete coping 1 : 2 : 4 mix 50mm thick complete as per specification : | 464 | Sqm. | |
| 32 | 32 | Providing and fixing aluminum work for doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and the directions of Engineer- in – charge .(Glazing and paneling to be paid for separately). for fixed portion Anodised aluminum (anodised transparent 81 dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC 15, Anodizing to be got done from approved Anodizer) | 100 | Kg. | |
| 33 | 33 | Providing and fixing aluminum work for doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and the directions of Engineer- in – charge .(Glazing and paneling to be paid for separately). For shutters builtup standard tubular sections of openable doors , windows & ventilators including providing & fixing hinges / rollers etc. and making provision for fixing of fittings wherever required (lockes shall be paid for separately). Anodised aluminum (anodised transparent 81 dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC 15, Anodizing to be got done from approved Anodizer) | 160 | Kg. | |
| 34 | 34 | Providing and fixing glazing in aluminium door, window ,ventilator shutters and partitions etc. with PVS / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(Cost of aluminium snap beading shall be paid in basic item.) With float glass panes of 5.0 mm thickness ( weight not less than 13.50 kg/sqm) | 80 | Sqm. | |
| 35 | 35 | S&f fixed wire gauge of stainless steel of 14 mesh x 24 gauge to the aluminium window by Aluminium beading 20x3mm with suitable screws at not exceeding 150mm distance at all heights with all lead and lift with scafolding. | 100 | Sqm. | |
| 36 | 36 | P & F Low level Flushing Cistern of 10 litres capacity (IS : 2556mark). Of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS: 1703 mark) complete including cutting and making good the wall: PVC with PVC bend as per IS : 7231 | 6 | Nos. | |
| 37 | 37 | P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make 32 mm waste pipe complete including cutting & making good the wall : Size 550 mm x 400 mm | 4 | Nos. | |
| 38 | 38 | Providing and fixing beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Size 600 x 450mm x 4 mm thick | 6 | Nos. | |
| 39 | 39 | P & F Jet spray for water closet with C.P. Copper Tube flange of approved make. | 6 | Nos. | |
| 40 | 40 | P & F C.P. brass Urinal Spreader for stall urinal of approved make. For Stall Urinal Normal size | 6 | Nos. | |
| 41 | 41 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (Internal work Exposed on wall) 25 mm nominal outer dia pipes | 500 | Mtr. | |
| 42 | 42 | Making connection of G.I. distribution branch with G.I. main including all fitting Upto 25mm dia | 10 | Nos. | |
| 43 | 43 | P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make: C.P. Brass bib cock,15mm nominal bore. | 30 | Nos. | |
| 44 | 44 | P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. C.P. Inlet connection 15 mm Brass (IS:8931 marked). | 20 | Nos. | |
| 45 | 45 | P & F 15 mm. Dia Connection Pipe of approved quality/make : PVC pipe with C.P. Brass nuts upto length, 450 mm | 20 | Nos. | |
| 46 | 46 | P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make : Gun-metal 25mm nominal bore. | 6 | Nos. | |
| 47 | 47 | P & F Ball Cock (IS :1703 Mark) with Rod & P.V.C. Ball complete : Brass wt.400 gm,15mm. | 6 | Nos. | |
| 48 | 48 | Emptying of Septic tank ,Soakage well etc. by disposing or sludge upto 5 Km. lead & taking out sewage including cleaning of site. | 10 | Cum | |
| 49 | 49 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes. 110 mm diameter Type 'A' \n | 60 | Nos. | |
| 50 | 50 | P & F PVC Storage Tank (IS:12701 marked indicating the BIS license No.) of approved make with cover, 25 mm dia 1 M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including placing on terrace( at all floors),making connection etc. complete of approved design. | 4000 | Ltr. | |
| 51 | 51 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Single Bend w/o Door 87.5° 110 mm dia. | 20 | Nos. | |
| 52 | 52 | Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked MMS ( IS:9537 P - III ) PVC conduit & it's accessories, round tiles,18 SWG M.S. box with earth terminal, 6 A switch, 3.0 mm thick ISI marked phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections, testing etc. as required. Short point (up to 3 mtr.) Group-1 | 20 | Nos. | |
| 53 | 53 | Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked MMS ( IS:9537 P - III ) PVC conduit & it's accessories, round tiles,18 SWG M.S. box with earth terminal, 6 A switch, 3.0 mm thick ISI marked phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections, testing etc. as required. Medium point (up to 6 mtr.) Group-1 | 60 | Nos. | |
| 54 | 54 | Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked MMS ( IS:9537 P - III ) PVC conduit & it's accessories, round tiles,18 SWG M.S. box with earth terminal, 6 A switch, 3.0 mm thick ISI marked phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections, testing etc. as required. Long point (up to 10 mtr..) Group-1 | 40 | Nos. | |
| 55 | 55 | Wiring of 3 pin 5 amp. Light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved make in surface / recessed ISI marked MMS ( IS:9537 P - III ) PVC conduit & it's accessories, 18 SWG 175 mm x 100 mm x 60 mm M.S. box with earth terminal, 6 A switch, 6 A socket, 3.0 mm thick ISI marked phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections, testing etc. as required. On board Group-1 | 30 | Nos. | |
| 56 | 56 | S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required including cutting the wall, covering conduit and making good the same as required. 20 mm thick Group-1 | 150 | Mtr. | |
| 57 | 57 | S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required including cutting the wall, covering conduit and making good the same as required. 25 mm thick Group-I | 200 | Mtr. | |
| 58 | 58 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required. 2 x 2.5 sq. mm. + 1x1.5sqmm Group-1 | 800 | Mtr. | |
| 59 | 59 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required. 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. Group-1 | 400 | Mtr. | |
| 60 | 60 | Supplying and fixing of power plug point accessories on 18 SWG metal box of size 175 x 100 x 60 mm. on surface or in recessed with suitable size phenolic laminated sheet cover including cost of 6 pin 16 amp. Switch and socket outlet , making connection , testing , etc. as required. Group-1 | 20 | Nos. | |
| 61 | 61 | P&F 240/415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections, testing etc. as required. Single pole MCB 6 A to 32 A rating Group-1 | 100 | Nos. | |
| 62 | 62 | P&F 240/415 V isolator conforming to IS:13947-III/ IEC 60947-3 on existing board / sheet including making connections, testing etc. as required. Four pole Isolator 63 A rating Group-1 | 6 | Nos. | |
| 63 | 63 | P&F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with suitable rating insulated copper bus bar, shorting link , neutral link, earth link and din bar,masking sheet, conforming to IS13032 & IS8623 including making internal DB terminations with copper lugs , testing etc. as required. Double door (Three phase) 8 way Group-1 | 4 | Nos. | |
| 64 | 64 | P & F ISI marked (IS :3854) 6 amp. flush type switch including cutting hole in tile and making connection testing etc. as required. Group-1 | 80 | Nos. | |
| 65 | 65 | P & F ISI marked (IS :3854) 16 amp. flush type switch including cutting hole in tile and making connection testing etc. as required. Group-1 | 20 | Nos. | |
| 66 | 66 | P & F of 3 pin 6 amp. flush type socket including cutting hole in tile and making connection testing etc. as required. Group-1 | 30 | Nos. | |
| 67 | 67 | P & F of 3/6 pin 16 amp. flush type socket including cutting hole in tile and making connection testing etc. as required. Group-1 | 20 | Nos. | |
| 68 | 68 | P & F IS:371 marked 6 amp surface type ceiling rose including making connection testing etc. as required. Group-1 | 60 | Nos. | |
| 69 | 69 | P & F ISI marked 6 amp bakelite batten/angle holder including making connection testing etc. as required. Group-1 | 40 | Nos. | |
| 70 | 70 | P & F socket size flush type 120/280 watt rotary 5 step fan regulator including making connection testing etc. as required Group-2 | 24 | Nos. | |
| 71 | 71 | P/Laying P.V.C. / XLPE insulated & P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I / IS :7098 P - I of Group 2 of approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size 4.0 Sq.mm 4 Core Group-2. | 200 | Mtr. | |
| 72 | 72 | P/Laying P.V.C. / XLPE insulated & P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I / IS :7098 P - I of Group 2 of approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size 2.5 Sq.mm 2 Core Group-2. | 100 | Mtr. | |
| 73 | 73 | P&F flush/surface type enclosure for housing MCB/Isolator with Din rail including making connections with lugs, repairs etc. as required With plastic enclosure Three way Group-2. | 6 | Nos. | |
| 74 | 74 | P & F double ball bearing capacitor start, aluminium body & blade ceiling fan with down rod up to 30 cm with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required.1400 mm sweep Group-1 | 12 | Nos. | |
| 75 | 75 | P & F of M.S. J- hook of standard design made out of 16 mm dia. M.S. round bar and fixed with cement concrete mortar with required support as required. | 12 | Nos. | |
| 76 | 76 | P & F of IP 65 / IP66 protected High Power LED Flood Light system with extruded aluminium housing, toughened glass diffuser with suitable lenses on LED to acheive various beam angles, 240V, 50Hz - High Power LED lamps supplied with pre-wired cable of 1 mtr. Integrated Driver shall be high efficiency having efficiency > 85% and in compliance to IEC standards.System life of 25,000 Burning Hours with 70% of initial Lumens maintained. Light output in Cool white or Warm White Colour as per engineers choice. Fixtures shall be CE and compliance High Power LED Flood Light 160W Group-2 | 6 | Nos. | |
| 77 | 77 | S & F of Street light bracket made out from following size of 'B' class GI pipe with heavy duty pole clamp, Saddles suitable fastners etc. as required. 25 mm dia. | 30 | Mtr. | |
| 78 | 78 | P & F energy efficient/ energy szving 9 Watt IP 20 LED Bulb cool white in existing holder/ fixture as required, minimum 900 Lumen output, 25000 burning hours CCT 5700 K or 6500 K(as per direction of Engineer Incharge) ANSI, Lamp efficacy minimum 100 lumen/ Watt, CRI 80, Driver efficiency >85%, PF 0.95 at full load/ 230 volt AC. | 30 | Nos. | |
| 79 | 79 | P & F of IP 65 protected LED Street Light fixutre 70-75 Watt (with surge protection device 10KA) applicable for area lighting with extruded pressure diecast aluminium housing, system lumens efficacy of 100 Im/ watt minimum, toughened glass with diffuser, suitable lenses on LED, 240V, 50 Hz of High Power LED lamps supplied with pre-wired cable of 1 mtr. Integrated Driver shall be high efficiency having efficiency > 85% and in compliance to IEC standards System life of 50,000 Burning Hours,CRI >80, PF>0.90 at full load, CCT 5700-6500 K (as per direction of Engineer Incharge) Fixtures shall be CE compliance. | 20 | Nos. | |
| 80 | 80 | P & F of IP20 surface/ recess mounted LED downlight made of pressure diecast aluminium housing with heat sink and good quality reflector, high efficiency external driver, power consumption 14/15 watt, system lumen efficiency >80 lumen/ watt, CCT 6000K (minimum) K, CRI > 0.9life tiem 50,000 burning hours. | 16 | Nos. | |
| 81 | 81 | P & F of IP 20 LED tube light 20 watt with external batten made from CRCA sheet steel suitable to replace T-B/T-12 tube light, integral driver, 2000 luman + 5% tolerance system luman efficiacy of 100 Lm/ watt minimumexpected life time of 25000 burning hours, CCT 5700 K, ANSI, CRI 80, driver efficiency >85% Life expectancy of driver min. 30000 hrs. PF 0.95 at full load/ 230 volt AC. | 40 | Nos. | |
| 82 | 82 | SITC of ISI mark( IS:8472) self priming monoblock pump set of approved make, TEFC, permanent split capacitor type (PSC), fitted with thermal overload protection, mechanical seal, 1440/1500 RPM, single phase(180 to 240 V). Including cost of hardware etc on existing platform complete. Pump shall have following HP Rating, phase, Head, minimum Discharge respectively. Self priming pumps 1.0/ 1.1 HP, 1-Ø, (10-50)Mtr, (53-6.5)LPM Group-1 | 1 | Nos. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
