Supply And Installation Of Maple Wood Flooring Along With Sports Equipment At Omkaranathan Indoor Stadium At Kalpetta Wayanad
Tender Value
1.82 Crore
Estimated cost
Bid Submission
22 Jul 2021
0 days left
EMD
50000
Bank guarantee accepted
Document Fee
5900
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kalpetta Wayanad → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Supply And Installation Of Maple Wood Flooring Along With Sports Equipment At Omkaranathan Indoor Stadium At Kalpetta Wayanad
BOQ
| Name of Work: Supply and Installation of Maple Wood Flooring along with Sports Equipments at Omkarnathan Indoor Stadium at Kalpetta, Wayanad | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Maple Wood Flooring with Sports Equipments | BI01010001010000000000000515BI0100001112 | ||
| 2 | 1.01 | od25630/2018_2019 Supply and installations of Maple wood sports flooring as per specifications and conditions mentioned below: \nHard Maple Surface: \Top surface to consist of a solid, MFMA Certified 2nd & better Grade , Hard Maple strip with minimum dimension of 20mm thickness x 57 mm width x RL (random length). Each individual strip of Hard Maple shall include the certification chop of the MFMA (Maple Flooring Manufacturers Association) and manufacturing mill certification number. System must provide a solid Hard Maple top layer of (minimum thickness) 20mm and is to be machined to a smooth finish and varnished after fixing of the individual boards in place at the installation site. Pre-finishing of the boards at the factory is not acceptable. 25 years warranty for the flooring.\nMaple Fasteners: Hard Maple boards to be fastened in place by pneumatic machine stapling with a 50mm coated flooring\nstaple. Boards to be secret fastened with the staple applied at a 45 degree angle at the top of the tongue on the side of the board.\nVapor Barrier: .20mm polyethylene membrane installed over the concrete base, beneath the flooring system as a vapor barrier between the concrete and wood floor.\nPlywood subfloor and resilient pads: 1st layer of plywood to be 12mm x 1220mm x 2440mm MR Grade ISI Mark plywood. 1st layer of plywood to have the resilient pads affixed to the underside on 30 cm o.c. spacing regiment and to be installed on the concrete with the long dimension of the plywood running at a 90 degree angle to the direction of the hardwood strip flooring 2nd layer of plywood to be 12mm x 1220mm x2440mm MR Grade plywood and fixed to the 1st layer with mechanical fasteners (staples) at a direction in 45 degree angle to the 1st layer\nShock Pads: Resilient pads of 19mm thick 2 stage, Polyurethane, resilient shock pads fixed to the underside of the 1st layer of plywood at 30cm o.c. spacing regiment. System must provide a minimum of 10 resilient pads per square meter of installed flooring system.\nShock Pads Tensile Strength should not be less than 5000 psi and must be tested in accordance with STEM\nFinishing :Floors to be machine sanded with drumsamder ( coarse grade 60 grit) sandpaper to lmake the floor smooth and non-slippery. The floor shall not b sealed. Apply 2 coat of approved sealer and 2 coat of Gym finish per manufacturer’s instructions with 2 coat of game line marking.\nPerformance & Quality Certification:\n1. Flooring system shall be independently tested and certified to the EN14904 performance standard and certificate from an accredited, independent testing laboratory must be submitted.\n2. Manufacturer to be a certified manufacturer of the MFMA (Maple Flooring Manufacturers Association)- certificate to be provided as evidence of such\n3. Manufacturer to be certified in accordance with ISO9001:2000 standard- ISO certificate to be provided as evidence of such.\n4. Flooring system to be tested and certified in accordance with STEM (Structural Testing and Engineering Measures)- certificate to be provided as evidence of such.\n5. Shock Pads Tensile Strength should not be less than 5000 psi and must be tested in accordance with STEM testing standards and provide minimum ratings fcertificate to be provided as evidence of such\n6. The floor manufacturer should have Certifications from following International federations -\n1. WORLD BADMINTON FEDERATION.\n2. INTERNATIONAL HAND BALL FEDERATION. (IHB)\n3.INTERNATIONAL BASKET BALL FEDERATION(FIBA) | BI01010001010000000000000515BI0100001113 | 2604 | Sqm |
| 3 | 1.02 | od25637/2018_2019 Supply and installation of Indoor movable sports equipment for basketball,volleyball and badminton \n1. 3 nos. Badminton Mobile Post Set with adjustable crank and net.\n2. Basketball backboards ( one pair) with frame and markings as per FIBA Standards, Two Basket rings with a ring mounting plate and net.\n3. One pair of FIVB approved Mobile Post Set for Volleyball, with Crank System For Height Adjustment and with net complete.\nThe rate shall be inclusive of all materials, transportation and labour charges for installing the equipment with all accessories and necessary / ancillary works so as to satisfy the FIVB standards. The work to be executed as per the the directions of the engineer-in-charge | BI01010001010000000000000515BI0100001114 | 1 | each set |
AI Tender Summary
Tender Timeline
Jul 09, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedJul 22, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 26, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender