Public Health And Engineering Department has published Providing Installation And Commissioning Of Efficient Centrifugal Pump Sets Vfd Controlled Soft Starters Panel Boards Valves And Allied Works At Shastri Nagar Pump House Under City Dn I ( North ) Jaipur. Submission Date for this Tender is 20-07-2021. Industrial Drive Tenders in City Sub Dn.V North Shastri Nagar JAipur Rajasthan. Bidders can get complete Tender details and download the document.
| Name of Work: Providing, Installation &Commissioning of Efficient Centrifugal Pump sets,VFD controlled Soft Starters,Panel Boards, Valves & allied works at Shastri Nagar Pump House under City Dn. I (North) Jaipur | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Supply delivery at site with necessary packing, receiving unloading shifting, installation, testing and commissioning of horizontal centrifugal split, casting pumps with motor, CI casing and casing ring, SS 316 impeller, SS 410 Shaft sleeve, coupling guard, common base plate, foundation bolts etc. complete with all respect as per the specification (RUIDP BSR 2017) | Item1 | ||
| 2 | 1.01 | Discharge 71 to 80 LPS and head 61 to 70 M | Item2 | 3 | Each |
| 3 | 2 | SITC of Variable Frequency Drives with panel supplied by manufacturer conforming to applicable standards with logic inputs & outputs, relay outputs and analogue outputs, plug in I/Oconnections, display of electrical parameters, state of load & operating time, RS 485 serial link for connections to Modbus. (RUIDP BSR 2017) | Item3 | ||
| 4 | 2.01 | 75 KW | Item4 | 3 | Each |
| 5 | 3 | Providing, lowering, laying in trenches, aligning, fixing in position and jointing Ductile Iron (DI) ISI marked K-7 grade S&S pipes as per IS:8329-2000 (amended upto date), with internal cement mortar lining suitable forpotable water with rubber ring (EPDM) joints as per IS: 5382-1985 including all taxes (Central and local), transportation and freight charges, inspection charges, loading/ unloading charges, including cost of labour and material, specials (Tee, bend etc.) satisfactory hydraulic testing, disinfection etc. complete as per technical specifications and direction of Engineer-in-charge. (excluding earth work) Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately. (PHED BSR 2020) | Item5 | ||
| 6 | 3.01 | 100 mm | Item6 | 500 | RMT |
| 7 | 3.02 | 250 mm | Item7 | 60 | RMT |
| 8 | 3.03 | 350 mm | Item8 | 440 | RMT |
| 9 | 4 | Manufacturing, supplying ,lowering, laying and jointing in position to correct line spirally welded SAW/Fabricated MS Pipe having bevelled end plates / coils, confirming to IS 3589-2001 or its latest revision/ amendmendment, for following thickness and inside diameter including all taxes, transportation and freight charges, inspection charges, loading/ unloading charges, including cost of labour and material, specials (Tee, bend etc.), field joints, satisfactory hydraulic testing, disinfection, commissioning etc. complete as per technical specifications and direction of Engineer-in-charge; (excluding earthwork, internal lining and outer coating). \nNote : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately. (BSR 2019 & 2020 PHED) | Item9 | ||
| 10 | 4.01 | 200 mm dia (6mm) | Item10 | 10 | R.Mtr |
| 11 | 4.02 | 300 mm dia (8mm) | Item11 | 30 | R.Mtr |
| 12 | 4.03 | 350 mm dia (8mm) | Item12 | 36 | R.Mtr |
| 13 | 5 | Providing, lowering, aligning, fixing in position in pipe line at work site, DI D/F Resilient seated (soft seated) Sluice Valves (Gate Valves) , Vacuum tight(bubble tight), straight and pocket less body passage of approved make of following class & dia complete confirming to BS-EN- 1171/ AWWA C-509 and of following specifications: Body & bonnet of\nDuctile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG- 400/12 as per IS 1865 or equivalent grade as per IS :3896-part2-1985 and subsequent revisions, Wedge of same material as body & shall vulcanised rubber lined with EPDM (food grade quality) and seals of NBR Face to face dimensions as per BS 5163-89/ IS 14846/2000 (amended up to date) /Din 3202 F4, Stem/ spindle of SS (AISI 316 or equivalent) Electrostatic epoxy powder(EP-P)/ Fusion bond epoxy ( Non-Toxic- suitable for drinking water) coated with minimum thickness of 250 microns inside and outside, Drilled as per IS 1538. Nut-Bolt confirming to IS:1363 and IS: 1367 (Galvanised steel) Insersion rubber of black EPDM 6mm thick. Suitable support structure as per directions of EIC, Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work. | Item13 | ||
| 14 | 5.01 | 250 mm dia | Item14 | 1 | Each |
| 15 | 5.02 | 300 mm dia | Item15 | 3 | Each |
| 16 | 5.03 | 350 mm dia | Item16 | 4 | Each |
| 17 | 6 | Providing, lowering, aligning, fixing in position in pipe line, CI double flanged swing type Non Return Valves (NRV) of approved make of following Pressure rating & dia complete, confirming to IS: 5312 (part -1)/ 2004 (amended up to date) and of following specifications: Body, Cover & disc of Grey cast iron of IS:210/ FG200. Face to face dimensions as per IS 5312 (part -1):2004 , Flanges Drilled as per IS:1538. All exposed machined ferrous surfaces shall be painted with one coat of aluminium red oxide primer conforming to IS:5660and two coats of black Japan paints conforming toType B of IS 341or paint conforming to IS9862 or IS2932( Non-Toxic- suitable for drinking water) applied inside and outside. Body seat ring of SS/CS Door face ring - EPDM/ Neoprene (food grade quality) ,Shaft of HTB1/ SS- AISI- 410, Hinge Malleable cast iron / SS AISI 316/410 ,Bonnet Gasket EPDM, Bush- Leaded tin Bronze/ PTET, Gasket EPDM/NBR ,Nut-Bolt as per IS:1363 and IS: 1367 (galvanised steel) ,Insersion rubber of black EPDM 6mm thick. Suitable support structure as per directions of EIC including jointing & jointing material,\nlabour, testing and commissioning along with pipeline as per Technical Specification & as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work. | Item17 | ||
| 18 | 6.01 | 350 mm dia | Item18 | 3 | Each |
| 19 | 7 | Providing, lowering, aligning, fixing in position and Jointing in pipe line, CI Double Acting Kinetic Air Valve with isolating Sluice Valve of approved makes for following pressure rating & dia complete, confirming to IS: 14845-2000 (amended upto date) and of following specifications: Body , Cover and Cowl - Grey Cast Iron as per IS:210- FG 200 ,Float - Stainless Steel AISI 304 / IS: 3444 , Float Guide- HBT1.HP Orifice- HTB2/ SS, Body seat ring - Leaded tin bronze/ SS .Seal ring and face ring - EPDM/NBR ,Ends flanged according to IS: 6418, Fastners - CS, All exposed machined ferrous surfaces shall be painted with one coat of aluminium red oxide primer conforming to IS:5660and two coats of paint conforming to IS:9862 or IS:2932( Non-Toxic- suitable for drinking water) applied inside and outside. Valves including all material, labour, testing and commissioning as per Technical Specifications and as per direction of Engineer in charge. Note: Rates are exclusive of connecting tee, pipe piece and earth work. | Item19 | ||
| 20 | 7.01 | 100mm dia | Item20 | 1 | Each |
| 21 | 8 | Providing, lowering, aligning, fixing in position and jointing CI\ndismantling joint (Suitable for Sluice valves etc.) as per IS specifications complete of the following sizes including all jointingmaterial, cost of all labour, testing and commissioning and as per technical specifications and direction of Engineer In-Charge. Class PN 1.0/1.6 | Item21 | ||
| 22 | 8.01 | 200mm dia PN-1.0 | Item22 | 2 | Each |
| 23 | 8.02 | 250mm dia PN-1.0 | Item23 | 2 | Each |
| 24 | 8.03 | 300mm dia PN-1.0 | Item24 | 3 | Each |
| 25 | 8.04 | 350mm dia PN-1.0 | Item25 | 4 | Each |
| 26 | 9 | SITC of D/F Full bore type Electromagnetic Flow Meter of approved make of following dia and specifications complete: Media : Water (Raw/ Chlorinated) , Pressure : up to 1.5MPa, Process temp: - 50 deg C, Flow/Meter Tube : SS 304, Electrode : SS AISI 316L / Hastelloy C276/ Tantalum, Lining Material : Hard Rubber/ Neoprene / Poly-urethane (PU), Flange : SS / CS, Flange Standard & Rating : ANSI 150, Coil housing : SS AISI 304/ Carbon Steel/ Die Cast Aluminium, with anticorrosive paint & provide completely sealed (leak proof) construction as per requirement of IEC 60529, Accuracy : ± 0.5 % M.V.- velocity 0.3 to 10 m/s, Transmitter/ signal convertor Enclosure : Die Cast Aluminium, Power Supply : 80-240 V AC - 50Hz, Output 1 : 4-20 mA, Output 2: Pulse, Communication Output : RS 485/ Heart, Display Type : LCD/ LED Display, Cable Entry : M20 X 1.5, Provision of RAM/PROM to store calibration and configuration parameters and totalizer value during power failure, Protection category- IP 68 for sensor (flow tube) and IP 67 for transmitter/ convertor, including Surge Arrester, if required, and all materials required for making connection with existing pipeline including cutting the existing pipeline etc. complete in all respect as per technical specification and as per direction of Engineer In-Charge. Note: Rates are exclusive of tail piece / dismantling joints and earth work. | Item26 | ||
| 27 | 9.01 | EFM 300 mm | Item27 | 1 | Each |
| 28 | 10 | Supplying & Installing 100 mm diameter sealed diaphragm bourdon type pressure gauge of range 0 to 10 kg. including all jointing material as per specification with safety cover. | Item28 | 4 | Each |
| 29 | 11 | Providing, lowering, laying, aligning, fixing in position CI Foot valves in pipe line as per IS:4038-1986 (amended upto date) suitable for potable water at all level/ depth including all material, labour hydraulic testing and commissioning as per technical specifications and as per direction of Engineer for following sizes: (RUIDP BSR 2017) | Item29 | ||
| 30 | 11.01 | 350mm dia | Item30 | 3 | Each |
| 31 | 12 | Providing and fixing in position CI Puddle collar (approx. 1m length) inside the wall including all material labour as per Technical Specifications and as per direction of Engineer. (RUIDP BSR 2017) | Item31 | ||
| 32 | 12.01 | 350mm dia | Item32 | 3 | Each |
| 33 | 13 | Providing and fixing of flanged/ plain ended MS Specials made from MS sheet strips of relevant IS specification of approved thickness by welding, lowering, laying, aligning, fixing in position at all level/ depths in trenches complete including all taxes, material, labour, inside lining, outside coating, testing and commissioning along with pipe line as per technical specifications and direction of Engineer-in-charge. (PHED BSR 2020) | Item33 | ||
| 34 | 13.01 | MS pipe specials upto 600mm dia (with minimum 5mm thickness sheet) | Item34 | 1600 | Kg |
| 35 | 14 | Providing and fixing of plain ended CI Specials as per site requirement and as per the directions of Engineer Incharge | Item35 | 1100 | Kg |
| 36 | 15 | Excavating trenches of required width for pipe cables, etc. including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 Mtr. including taking out the excavated soil, and then returning the soil as required in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposal of surplus excavated soil as directed within a lead of 50 Mtr.:\nAll kinds of soil | Item36 | ||
| 37 | 15.01 | Pipes cables, etc. exceeding 80mm dia but not exceeding 300mm dia. | Item37 | 500 | Mtr. |
| 38 | 15.02 | Pipes cables, etc. exceeding 300mm dia but not exceeding 600mm dia. | Item38 | 450 | Mtr. |
| 39 | 16 | Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge: In cement mortar. | Item39 | 5 | Cum |
| 40 | 17 | Demolishing cement concrete including disposal of material within 50 mtr. lead 1:3:6 or richer mix (PWD BSR-2019, Jaipur) | Item40 | 6 | Cum |
| 41 | 18 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. | Item41 | 6 | Cum |
| 42 | 19 | Dismantling manualy by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 mtr. Lead as per direction of Engineer Incharge.(PWD BSR-2012, Jaipur) | Item42 | ||
| 43 | 19.01 | Water bound mecadam road (average thickness250mm) | Item43 | 100 | Sqm |
| 44 | 19.02 | bituminous road (avrage thickness 300mm) | Item44 | 100 | Sqm |
| 45 | 20 | Work of Inter Connection in DI/CI pipe line including dismantalling of BT road/ CC road/ excavation of soil, cutting of existing pipeline, jointing of Tee (complete) and other specials excluding sluice valve, dewatering, transportation from JE store and providing adequate safety of site & testing for water proof inter connection using his own T&P, labour & dewatering pump etc. required to complete the job. (Material such as Tee/ Tee Clamp/ rubber sheet/ CID joints required for Inter connection shall be provided by the department free of cost). | Item45 | ||
| 46 | 20.01 | in Concrete Road | Item46 | ||
| 47 | 20.02 | 80-100 mm CI/DI/MS | Item47 | 3 | Each |
| 48 | 20.03 | 125-150 mm CI/DI/MS | Item48 | 3 | Each |
| 49 | 20.04 | 200-250 mm CI/DI/MS | Item49 | 4 | Each |
| 50 | 20.05 | 300-400 mm CI/DI/MS | Item50 | 4 | Each |
| 51 | 21 | Work of Inter connection in AC/uPVC pipeline including dismantalling of BT road/CC road/excavation of soil, cutting of existing pipeline, jointing of Tee (complete) and other specials excluding sluice valve, dewatering, transportation from JE store and providing adequate safety of site & testing for water proof inter connection using his own T&P, labour & dewatering pump etc. required to complete in the job. (material such as Tee/Tee clamp/rubber sheet/CID joints required for inter connections shall be provided by the department free of cost). in all bituminous road\n | Item51 | ||
| 52 | 21.01 | in Concrete Road | Item52 | ||
| 53 | 21.02 | Up to 110 mm AC/PVC | Item53 | 3 | Each |
| 54 | 21.03 | Up to 160 mm AC/PVC | Item54 | 4 | Each |
| 55 | 21.04 | Up to 250 mm AC/PVC | Item55 | 3 | Each |
| 56 | 21.05 | Up to 400 mm AC/PVC | Item56 | 5 | Each |
| 57 | 22 | Earthwork in excavation by mechanical means (Hydaulic excavator) manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sum on plan) including dressing of sides and ramming of bottoms,lift upto 1.5 m,including taking out the excavated soil and depositing and refiling of jhiri with watering & ramming and disposal of surplus excavated soil as al kind of soil.PWD BSR 2019 | Item57 | 10 | Cum |
| 58 | 23 | Random Rubble stone masonary for Foundationand plinth in cement sand mortar above 30cm thick wall in c: | Item58 | ||
| 59 | 23.01 | Cement mortar 1:6 (1 Cement :6 Sand) PWD BSR 2019 | Item59 | 5 | Cum |
| 60 | 24 | Plaster on new surface on wall in cement sand mortar 1:4 including racking of joints etc. complete fine finish. | Item60 | ||
| 61 | 24.01 | 20mm thick. PWD BSR 2019 | Item61 | 225 | Sqm. |
| 62 | 25 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. | Item62 | ||
| 63 | 25.01 | M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). PWD BSR 2019 | Item63 | 10 | Cum |
| 64 | 26 | Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.\nM20 grade Nominal Mix / Design Mix (PWD BSR 2019) | Item64 | 9 | Cum |
| 65 | 27 | Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc. | Item65 | 20 | Sqm |
| 66 | 28 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. | Item66 | ||
| 67 | 28.01 | Cold twisted deformed bars (IS : 1786). (PWD BSR 2019) | Item67 | 700 | Kg. |
| 68 | 29 | Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead :With cement mortar 1 :4 ( 1 cement : 4 coarse sand). \n(PWD BSR 2019) | Item68 | 150 | Sqm |
| 69 | 30 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding: | Item69 | ||
| 70 | 30.01 | New work (two or more coats) including scrapping with cement primer . (PWD BSR 2019) | Item70 | 250 | Sqm |
| 71 | 31 | Painting exterior surface of Wall with 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty, etc complete in all respect. | Item71 | ||
| 72 | 31.01 | Old Work (PWD BSR 2019) | Item72 | 350 | Sqm |
| 73 | 32 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : \nOld work (One or more coats). (PWD BSR 2019) | Item73 | 250 | Sqm |
| 74 | 33 | Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, round tiles,Hot Dipped Galvanized Modular Box with earth terminal, screwless cage connectors for neutral looping in switch board & false ceiling point, 6 A Modular switch,Modular plate with grid plate, screws, making connections, testing etc. as required. | Item74 | ||
| 75 | 33.01 | Short point (up to 3 mtr.) | Item75 | 14 | P. point |
| 76 | 34 | Wiring of 3 pin 5 amp. Light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, Hot Dipped Galvanized M.S Modular box with earth terminal, screwless cage connectors for neutral looping in switch board , 6 A modular switch, 6 A modular socket, Modular plate with grid plate, screws, making connections, testing etc. as required. | Item76 | ||
| 77 | 34.01 | On board | Item77 | 5 | P. point |
| 78 | 35 | P & F double ball bearing capacitor start ceiling fan of approved make complete with regulator and other accessories as required. (for estimation purpose only) | Item78 | ||
| 79 | 35.01 | 1200 mm sweep | Item79 | 6 | Each |
| 80 | 36 | P & F strip type fluorscent tube fitting fabricated from (CRCA sheet and finished with powder coating / stove enamelled paint)/(extruded non corrosive UV resist EP channel) complete with accessories like (OCCB, starter, starter seat)/ EB, rotor holder, terminal block duly prewired with copper conductor including making connection, testing etc. as required. ( without tube)\n | Item80 | ||
| 81 | 36.01 | 1 X 36 Watts with OCCB | Item81 | 20 | Each |
| 82 | 37 | P & F Fluorscent tube rod in existing fixtures as required\n | Item82 | ||
| 83 | 37.01 | 36/40 Watts | Item83 | 10 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
