The System Design Manufacturing Testing Supply Installation And Commissioning Of Plant And Machinery Equipment Electrical And Other Related Works For Setting Up Of Proposed Site Mixed Bulk Explosives Plant At Umrer Dist Nagpur Mh . , Umrer-Maharashtra

The System Design Manufacturing Testing Supply Installation And Commissioning Of Plant And Machinery Equipment Electrical And Other Related Works For Setting Up Of Proposed Site Mixed Bulk Explosives Plant At Umrer Dist Nagpur Mh . - 2 Supply Of Ss Hold Tank For Storage Of An / Cn Melt Of 103 Kl Capacity, Moc: Ss-304 L ( Bottom 8 Mm, Shell 6 Mm And Top 5 Mm Thick ) , Size - 4500 Mm Dia X 6750 Mm Height, Tank Will Be Vertical, Cylindrical Flat Bottom & Conical Self-Supported Roof With Proper Sand Leveling, Grouting Along With Electrical Work And Piping Work With Necessary Fittings, Accessories. The Specifications And Requirement Of The Hold Tank And Accessories Will Be As Per The Details Mentioned In Brief Scope Of Work. Piston Valve- 50 Nb-1 No, Solenoid Actuated Valve -50 Nb- 3 Nos, Ball Float Steam Trap -25 Nb-4 Nos, Globe Valve-25 Nb-4 Nos, 2 Way Ball Valve 65 Nb- 2Nos, 3 Way Actuator Operated Ball Valve 40 Nb- 2Nos, 2 Way Ball Valve 40 Nb- 1 No, 2 Way Ball Valve 25 Nb- 2Nos And Suitable Centrifugal Pump-1 No. 3 Supply Of Electrical Work – Laying Of Cable And Electrical Fixtures 4 Supply Of Ss Piping Of 50 Nb Dia Long With Necessary Bends And Fittings For Process Piping With Heat Tracing And Insulation 5 Supply Of Quick Release Coupling Set ( Male And Female ) For 50 Mm Id Suitable For Ss Piping & Flexible Chemical Hose 6 Supply Of Ss304 Flanges 50 Nb Size For Process Piping 7 Supply Of Ss304 Valves 50 Nb Size For Process Piping 8 Supply Of Steam Transfer Piping Of 50 Nb Ms Ibr Seamless Pipe With Insulation And With Necessary Flanges And Pipe Fittings From One Point To Hold Tanks 9 Supply Of 50Nb Valves For Steam Piping 10 Con. Reducer 50 X 40 Nb, Ss-304L, #150 11 Supply Of Float Type 25 Nb Steam Traps 12 Supply Of 80 Kl Storage Tank For Oxidizer Phase ( Op ) Of 4500 Mm Dia X 5000 Mm Straight Height. Material Of Construction - Ss304, Plate Thickness - Shell 6 Mm, Top Cover 5 Mm And Bottom Plate 8 Mm. Vertical, Cylindrical, Flat Bottom, Conical Flanged Top With Supports Welded With 75X75 X8 Mm Angle Ring, The Tank Will Be Complete With 125 Mtrs, 40 Nb Sch 40Spiral Ss304 Coil, In Two Parts For Necessary Steam Heating. It Will Also Be Completed With All Necessary Nozzle, Drain, Vent, Support Lugs, Heat Exchangers, Insulated, Liquid Level Transmitter Having Lcd Display And Suitable Ms Ladder With Railing At The Top And Sampling Point Having An Arrangement Of Two Valves For Drawl Of One Liter Of Sample. Piston Valve 50 Nb-2 Nos, Solenoid Actuated Valve 50 Nb-4 Nos, Solenoid Actuated Valve 50 Nb-4 Nos, Globe Valve -25 Nb-6 Nos, 3 Way Actuator Operated Ball Valve 40 Nb- 1No, 2 Way Ball Valve 25 Nb- 2Nos, 2 Way Ball Valve 80 Nb- 2Nos, 3 Way Ball Valve 40 Nb- 2Nos, 3 Actuator Operated Ball Valve 40 Nb- 2Nos And Suitable Centrifugal Pump-1 No. 13 Supply Of Electrical Work – Laying Of Cable And Electrical Fixtures 14 Supply Of Ss Piping Of 50 Nb Dia Long With Necessary Bends And Fittings For Process Piping With Heat Tracing And Insulation 15 Supply Of Quick Release Coupling Set ( Male And Female ) For 50 Mm Id Suitable For Ss Piping & Flexible Chemical Hose 16 Supply Of Ss304 Flanges 50 Nb Size For Process Piping 17 Supply Of Ss304 Valves 50 Nb Size For Process Piping 18 Supply Of Steam Transfer Piping Of 50 Nb Ms Ibr Seamless Pipe With Insulation And With Necessary Flanges And Pipe Fittings From One Point To Hold Tanks 19 Supply Of 50Nb Valves For Steam Piping 20 Con. Reducer 50 X 40 Nb, Ss-304L, #150 21 Supply Of Float Type 25 Nb Steam Traps 22 Supply Of 24 Kl Storage & Blending Tank For Oxidizer Phase ( Op ) Of Id Of Tank: 3580Mm, Tank Wall Thickness 6Mm Plus 50Mm Space For Insulation Material All Around The Tank, Thus Total Od Of Tank Shall Be Approx. 3692Mm X Height Of Tank Wall: 2600Mm, Plus Channel Support Of 200Mm At The Tank Base & Top, Thus Total Height Of Tank From Floor Level Shall Be 3000Mm Straight Height. Tank Material Of Construction - Ss304, Plate Thickness - Shell 6 Mm, Flanged Flat Top 4 Mm, Flat Bottom 8 Mm With Ms Channel Support, The Blend Tank Will Be Vertical, Cylindrical, Flat Bottom, Flat Flanged Top, Complete With 90 M, 40 Nb Sch 40 Spiral Ss304 Coil In Two Parts, 90 Mm Dia Shaft Along With 02 Numbers Of Pitch Blade Top Entry Turbine Agitator At Different Depth, 65-70 Rpm With Supports, All Necessary Nozzle, Drain, Vent, Support Lugs And Ms Platform With Railing And Suitable Ladder And 20 Hp, Ip 55, Tefc Motor With Suitable Electrical Power Switch, Gear Box Along With Insulation Of Tank By 50 Mm Thick Glass Wool Pad, Chicken Mesh And Cladding With Aluminium Sheet Of 22 Swg. Height Of Manhole Collar To Be Max 200 Mm So That It Is Within The Height Of Channel Support At The Top Of Tank And It Does Not Interfere During Placement Of Tank. Manhole Size Required Minimum 600 Mm Id At The Top Of Tank For Feeding Of An & Cleaning Of Tank. Providing Feed Hopper To Be Fitted On Manhole Having Square Shape ( Approx. 1M X1m ) At Top And With Bottom Dia Equivalent To Manhole Dia With Fixing Arrangement With Nut & Bolts Of Ss Is Required For All Tanks. Other Details Are Mentioned In Scope Of Work. 23 Supply Of Ss304 Flanges 50Nb For Above Process Piping 24 Supply Of Ss304 Valves 50 Nb Size For Above Process Piping 25 Supply Of Electrical Work – Laying Of Cable - Approx. 3Ø Power Supply To Electrical Fixtures Attached To Blend Tanks, Pumps And Boilers 26 Supply Of Flexible Chemical Hose For Oxidizer Phase Unloading And Transfer Line - 50 Mm Id, Is:7654 Type1 With Quick Release End Fittings Of Bj Or Any Other Suitable Better Make 27 Supply Of Quick Release Coupling Set ( Male And Female ) For 50 Mm Id Flexible Chemical Hose - Of Bj Corporation Make Or Equivalent 28 Supply Of Insulated Steam Transfer Piping Of 40Nb Ms Pipe With Flanges And Pipe Fittings Form Supply Line To The Proposed Blend Tanks 29 Supply Of Insulated Steam Transfer Piping Of 25Nb Ms Ibr Seamless Pipe With Flanges And Pipe Fittings For Recovery Of Condensates 30 Supply Of 40Nb Valves For Steam Piping 31 Supply Of 25Nb Valves For Steam Piping 32 Supply Of Float Type 25 Nb Steam Traps 33 Supply Of Storage Tank ( Moc-Ms ) Of 40 Kl Capacity With Additional Provision For 5% Air Space , Moc-Is 2062, Size-3600 Mm Dia X 4000 St. Ht. . The Tank Will Be Vertical, Cylindrical, Flat Bottom And Conical Top To Be Fabricated From Is 2062 Quality Plates. Shell & Top Will Be From 6 Mm Thk Plates And Bottom Will Be 8 Mm Thick. Complete With Steam Heating Coil Of Approx. 80 Mtrs. Of 25 Nb Sch 10 Ms Pipe Coil. The Tank Will Be Completed With Necessary Drain, Vent Etc. The Tank Will Be Insulated By 50 Mm Thick Glass Wool Pad, Chicken Mesh And Cladding With Aluminium Sheet Of 22 Swg Along With Suitable Ladder & Railing With Ms Structure With Anticorrosive Paint Along With Walkway Over The Tanks By Gratings / Chequered Plate. Walkway Of Both Tanks Will Be Interconnected. 2 Nos. Lightning Arrester With 2 Nos. Earth Pit And Suitable Foundation. Piston Valve 50 Nb-2 Nos, Solenoid Actuated Valve 50 Nb-4 Nos, Thermo Dynamic Steam Trap 25 Nb-4 Nos, Globe Valve 25 Nb-4 Nos, 3 Way Actuator Operated Ball Valve 50 Nb- 1 No, 2 Way Ball Valve 50 Nb- 2Nos 34 Supply Of Oil Pipe - 80 Nb Dia, Ms Pipe Along With Necessary Valves And Fitting And Strainers For Unloading Of Furnace Oil Tankers 35 Supply Of Gear Pump Of Capacity 300 Lpm With Flame Proof Motor With Suction And Discharge Port Of 2 36 Supply Of Oil Pipe- 2 Dia, Ms Along With 04Nos. Valves And Fitting With Heat Tracing And Insulation 37 Supply Of Steam Transfer Piping Of 50 Nb Ms Ibr Seamless Pipe With Insulation And With Necessary Flanges And Pipe Fittings 38 Supply Of 50Nb Valves For Steam Piping 39 Supply Of Insulated Steam Transfer Piping Of 25Nb Ms Pipe With Flanges And Pipe Fittings For Condensate 40 Supply Of 25Nb Valves For Steam Piping 41 Supply Of Float Type 25 Nb Steam Traps 42 Motor Starter Panel / Box ( 3-Ph, 50Hz, 415V, Rated Current 20A, S.C Current 50Ka, 1 Sec Mcc With Ip54 Protection, Starter Rating 10Hp Dol, Consisting With Mccb / Mpcb, Contactor, O / L Relay, On / Off / Trip Indication, Start / Stop Pb, 1No. Mcb As Per Type -2 Co Ordination Selection ) ( Specification: Wall / Structure Mounting, Non-Compartmentalizing Type, Constructed With 2 / 1.6Mm Thick Crca Sheet, With Powder Coated Panting Shade: Ral 7035 ) - L&T / Siemens / Standard Make And Will Be Feed From Existing Electrical Panel. 43 Cable 1100V Grade Multi Strand Armoured Cable As Per Is:7098 ( Part-1 ) / 1988 Along With Cable Gland Double Compression Type And Cable Lug ( Aluminium ) As Per Site Requirement - 4Cx16 Sq Mm. Al. Xlpe Cable 44 Supply Of Fuel Phase ( Fp ) Blend Tank, 2.5 Kl Capacity, 1350 Mm Dia X 1800 Mm Height, Material Of Construction - Is 2062, Plate Thickness - Shell And Top 5 Mm, Bottom Dish 6 Mm, The Blend Tank Will Be Vertical, Cylindrical, Dished Bottom, Flat Flanged Top, Complete With 20 M, 25 Nb Sch 40 Spiral Coil, 50 Mm Dia Shaft Along With Pitch Blade Turbine Agitator, With All Necessary Nozzle Drain, Vent, Support Legs & Ladder And 2 Hp Tefc, Ip 55 Motor And Suitable Gear Box For Driving Turbine Agitator And Load Cell With Least Count Of 1 Kg And Max Net Weight Carrying Capacity Of 3000 Kg. Supply Of Temperature Controller With Suitable Arrangement To Maintain Temperature Of Fuel Phase In The Range Of 40-60° C. Piston Valve 25 Nb-2 Nos, Solenoid Actuated Valve 25 Nb-2 Nos, Thermo Dynamic Steam Trap 20 Nb-2 Nos, Globe Valve 20 Nb-2 Nos, 2 Way Ball Valve 25 Nb- 2Nos, 3 Way Ball Valve 20 Nb- 2Nos, Disc Check Valve20 Nb- 2Nos 45 Supply Of Basket Strainer For Oxidiser Phase, 75 Ltrs Capacity, Make Of Construction - Vessel Ss 304 And Jacket Is 2062, Vessel Shell 5 Mm, Bottom Dish 6 Mm, Top Plate 6 Mm, Jacket Shell 5 Mm, Dish 6 Mm, The Strainer Will Be Vertical, Cylindrical, Dished Bottom, Flat Flanged Top Jacketed Vessel Complete With Perforated Strainer With 18 Mesh Ss Filter Cloth, Inlet / Outlet Nozzle, Drain Etc. 46 Supply Of Basket Strainer For Fuel Phase - 50 Ltrs Capacity, Material Of Construction Ss 304, Plate Thickness - Vessel Shell 5 Mm, Bottom Dish 6 Mm, Top Plate 6 Mm, Jacket Shell 5 Mm, Dish 6 Mm, The Strainer Will Be Vertical, Cylindrical, Dish Bottom, Flat Flanged Top, Jacketed Vessel Complete With Perforated Strainer With 18Mesh Ss Filter Cloth, Inlet / Outlet Nozzle, Drain Etc. 47 Supply Of Screw Pump, Rmab 601 Of Make Roto Pumps Ltd Or Any Other Suitable Better Make For Transferring Oxidizer Phase To Blender And 7.5 Hp Tefc, Ip 55 Motor With Suitable Gear Box And Coupling And Base Plate 48 Supply Of Screw Pump, Rdaa 492 Of Make Roto Pumps Ltd Or Any Other Suitable Better Make / Gear Pump For Transferring Fuel Phase To Blender And 2.0 Hp Tefc, Ip 55 Motor With Suitable Gear Box And Coupling And Base Plate. 49 Supply Of Emulsion Blender Of 150 Kg / Min Capacity, 208 Mm O / D X 458 Mm Long, Material Of Construction - Body Of Aluminium 8 Mm, Rod 9.5 Mm, Rotating Shaft Ss 410, 28.5 Mm Dia, Blades Ss 410, 5 Mm Thick, Blender Will Be Horizontal Cylindrical Complete With Series Of Pin And Rotating Shaft Complete With Shear Blades, End Bearing With Seals And 25 Hp Tefc, Ip 55 Motor With Suitable Gear Box And Coupling Base Plate 50 Supply Of Control Panel Comprising Of Variable Frequency Drive ( Vfd ) Panel Consisting Of Danfoss Or Equivalent Make Frequency Converter Suitable For Three Phase 415 Volts Motor Of Following Capacity A ) 7.5 Hp, B ) 2.0 Hp, C ) 25 Hp, D ) 7.5 Hp Along With Rpm Indicators 51 Supply Of Inline Magnetic Flow Meter / Mass Flow Meter For Ob Ss 304, Range 60 - 150 Lpm Of Ie Or Equivalent Make. 52 Supply Of Inline Magnetic Flow Meter / Mass Flow Meter For Fp Ss 304 Range 5 - 20 Lpm Of Ie Or Equivalent Make 53 Supply Of Screw Pump- Wmaa 602 Of Roto Pumps Ltd Or Any Other Suitable Better Make For Transfer Of Emulsion Matrix From Product Pump To Silo And 7.5 Hp Tefc, Ip 55 Motor With Suitable Gear Box And Coupling And Base Plate 54 Supply Of Control Panel Along With Safety Device Units ( High Pressure, Low Pressure Switches, High Temperature Cut-Off Switch & Pressure Gauge, Rupture Disc ) For Emulsion Transfer Pump 55 Supply Of Flexible Chemical Hose For Oxidizer Phase Unloading And Transfer Line - 50 Mm Id, Is:7654 Type1 With Quick Release End Fittings Of Bj Or Any Other Suitable Better Make 56 Supply Of Furnace Oil / Hsd Unloading And Transfer Line With Suction Line Of 50 Nb & Delivery Line Of 40 Nb, Sch 10, Material Of Construction Ms As Per Site Requirement 57 Supply Of Oxidizer Phase -Filter - Screw Pump - Flow Meter Line With Suction Line 65 Nb & Delivery Line Of 50 Nb, Sch 10, Material Of Construction Ss 304 As Per Site Requirement 58 Supply Of Flexible Chemical Hose For Oxidizer Phase - Flow Meter - Blender Line - 50 Mm Id, Is:7654 Type1 With Quick Release End Fittings Of Bj Or Any Other Suitable Better Make 59 Supply Of Fuel Phase ( Fp ) - Filter - Pump - Flow Meter Line With Suction Line 50 Nb & Delivery Line 25 Nb, Moc Ss 304 60 Supply Of Fuel Phase - Flow Meter - Blender - 1.0 Inch Flexible Hose Of Gates Make Or Equivalent With Both Ends Fitted With Quick Coupler Of Bj Or Any Other Suitable Better Make 61 Supply Of Emulsion Matrix Transfer Line From Blender To Silo - 65 Nb Sch 10 Ss 304 62 Supply Of Quick Release Coupling Set ( Male And Female ) For Fixing 50 Mm Id Transfer Hoses With Blend Tank Outlet - Of Bj Corporation Make Or Equivalent 63 Supply Of Ss 304 Three Way Ball Valve 65 Mm Between Emulsion Matrix Transfer Line From Blender To Silo 64 Supply Of Gear Pump Of Capacity 300 Lpm With Flame Proof Motor With Suction And Discharge Port Of 2 For Preparation Of Fuel Phase, Base Plate, Suitable Hopper, Starter / Panel ( As Per Site Condition ) 65 Supply Of Silo For Storage Of Emulsion Matrix Of 24 Kl ( 30T ) Capacity, Moc-Is 2062, Size-3000 Mm Dia X 3000 Mm Height X 750 Mm Conical Height, Silo Will Be Vertical, Cylindrical, Conical Bottom And Top Complete With All Necessary Nozzle, Vent, Support Bracket, With Suitable Platform With Ladder To Access The Various Inlets / Outlets At The Top Of The Silo Along With Insulation Of 50 Mm Thick Glass Wool Pad, Chicken Mesh And Cladding With Aluminium Sheet Of 22 Swg With Epoxy Paint Inside Silo. 3 Way Ball Valve 125 Nb- 2Nos, Butterfly Valve Actuator Operated 65 Nb- 1Nos 66 Supply Of Digital Load Cells ( Mettler Toledo Make ) For Silo 67 Supply Of Control Panel Along With Safety Device Units ( High Pressure, Low Pressure Switches, High Temperature Cut-Off Switch & Pressure Gauge, Rupture Disc ) For Emulsion Transfer Pump 68 Supply Of 2.5 Inch Id Flexible Hose Of Gates Make Or Equivalent With Both Ends Fitted With Quick Coupler Of Bj Make 69 Supply Of Emulsion Matrix Transfer Line From Hopper Of Screw Pump To Pump Trucks And Emulsion Tanker To Silo - 65 Nb Sch 10 Ss 304. 70 Supply Of Ss 304 Flanges For Above Process Piping 71 Supply Of Ss 304 Valves For Above Process Piping 72 Supply Of Quick Release Coupling Set ( Male And Female ) For 50 Mm Id Flexible Chemical Hose - Of Bj Corporation Make Or Equivalent Along With Suitable 1 No. Dust Cap 73 Supply Of Control Panel Along With Safety Device Units ( High Pressure, Low Pressure Switches, High Temperature Cut-Off Switch & Pressure Gauge, Rupture Disc ) For Emulsion Transfer Pump 74 Supply Of Rotary Gear Pump With Impeller Nitrile Rubber With Electric Motor And Suitable Gear Box Make: Napco Or Equivalent Capacity :3’’ -400 Lpm, Discharge :10 Bar 75 Design & Supply Of Single Roll Crusher Of Capacity 15-16 Mt / Hr For Crushing High Density Ammonium Nitrate Lumps ( Bag Size ) 750 Mm X 500 Mm X 250 Mm With Opening Of The Crusher 900 Mm ( Approx ) X 550 Mm ( Approx ) And Output Size 40 Mm Approx Along With Suitable Drive And Motor And Starting Panel And Supply Cable And Necessary Safety Features Including Providing Of Suitable Civil & Structural Foundation And Suitable Placement Of Tail End Of The Conveyor And Support System Along With Charge Hopper Above The Crusher Opening And Platform For Keeping Pallets Of Hdan And Space For Manual Charging Of Bags In To Crusher As Per The Details Mentioned In Brief Scope Of Work. 76 Design & Supply Of High Density Ammonium Nitrate Conveying System Through A Belt Conveyor Of Width 800-1000 Mm & Cd Of Approx 35-40 M Along With Skirting Arrangement On Both Edges Of The Conveyor And Suitable Drive, Motor, Starting Panel And Supply Cable And Necessary Safety Features Along With 4 Nos. Discharge Points / Ploughs For Feeding 4 Nos. Blend Tanks Falling In The Discharge Zone Of Around 20M. ( The Tanks Are Of Dia 3692 Mm-Od With A Centre To Centre Gap Of 5000 Mm Between The Tanks ) With Total Lift Requirement Of Around 3M From Tail End To Discharge Zone Including Providing Of Suitable Civil & Structural Foundation For Supporting The Conveyor System Along With Side Walk Ways As Per The Details Mentioned In Brief Scope Of Work. 77 Supply Of Fo Fired Boiler Unit Rxd-850 ( 850 Kg / Hr ) Working Pressure Of 10.54 Kg / Cm2 With Economizer Of Thermax Make Only 78 Supply Of Softner Ez30 Of Thermax Make Only 79 Supply Of Filter Ez40 Fdm Of Thermax Make Only 80 Supply Of Oxidation Chamber- E Z200c Of Thermax Make Only 81 Supply Of Mild Steel Chimney ( Self Supported ) Of 300 Mm Top Diameter And 18 Mtrs Height ( Approx ) Along With Flue Gas Duct With Supporting Structure, Sampling Collection Point, Platform For Collection & Spiral Ladder Up To Collection Point And Ladder From Collection Point To Top - To Cater 2 Nos Of 850 Kg / Hr Boilers Including Duct Piping From Boilers To Chimney, Lightning Arrester And Light Indicator Over Chimney With 2 Nos. Earth Pit And Suitable Foundation 82 Supply Of Pressure Reducing Station, Range- In Let Pressure 10.54 Kg / Cm2, Out Let Pressure 3.5 Kg / Cm2 Max, Steam Flow-Max. 3000 Kg / Hr, Body-C.S, Inlet Size-80Mm, Outlet-100Mm With Cast Steel Valve Prv Size 50Mm Flange Class Asa 150 83 Supply Of Ms Day Tank For Fo - 3 Kl Capacity ( Round Tank With 5 Mm Plate ) With Level Indicator, 2 Nos Of 6Kw Heaters Along With Temp. Controller And Cut Off Switch Along With Ms Piping From Day Tank To Boilers 84 Supply Of 4 Nos Of Hdpe Day Tanks For Soft Water Of 3 Kl Capacity Each, Along With Ms Piping From Day Tank To Boilers 85 Supply Of Insulated Steam Header Piping 6 Ms Ibr Seamless Pipe Thickness 8Mm With Airvent, Pressure Relief, Safety Valve, Pressure Gauge And Draining Of Steam Condensate Through Steam Trap, 2 Nos Outlet For 2 Nos Prs With Provision Of Suitable Length With Flanges And Pipe Fittings Along With Nrv 4 Nos In Between Boiler Output And Steam Header With Necessary Bend And Fittings For Catering Steam Output From 2 Nos Boilers 850 Kg / Hr Each And 5 Nos More Points For Future Expansion In Same Header ( With A Provision For Up Gradation To 6000 Kg / Hr ) 86 Supply Of Steam Transfer Piping Of 50 Nb Ms Ibr Seamless Pipe With Insulation And With Necessary Flanges And Pipe Fittings From Boiler Outlet / Steam Header To Prs To Blend Tanks 87 Supply Of Insulated Steam Transfer Piping Of 80Nb Ms Pipe With Flanges And Pipe Fittings For Recovery Of Condensate From Blend Tanks To Condensate Recovery Tank 88 Supply Of Insulated Steam Transfer Piping Of 25Nb Ms Pipe With Flanges And Pipe Fittings For Steam Supply / Condensate Collection 89 Supply Of 50Nb Valves For Steam Piping 90 Supply Of 25Nb Valves For Steam Piping 91 Supply Of Float Type 25 Nb Steam Traps 92 Supply Of Water Line - 2 Dia, Gi, Class B Along With Necessary Valves And Fittings As Per Site Requirement 93 Supply Of Water Line - 1 Dia, Gi, Class B Along With Necessary Valves And Fittings As Per Site Requirement 94 Supply Of Furnace Oil - 1.5 Dia, Ms Along With Necessary Valves, And Fitting With Heat Tracing And Insulation 95 Supply Of Furnace Oil - 1 Dia, Ms Along With Necessary Valves, And Fitting With Heat Tracing And Insulation 96 Supply Of Monoblock Pump 2Hp, Connection Size 2 For Delivery Up To Height Approx 40 Feet - Reputed Make Like Kirloskar / Ksb Or Equivalent 97 Supply Of Boiler Area Mcc Panel ( 3-Ph, 50Hz, 415V, Rated Current 250A, S.C Current 50Ka, 1 Sec Mcc With Ip54 Protection With Aluminium Bus Bar Consisting Of Following Feeders, Mcc / Pdb ( I / C Feeders Are Consisting Of Ammeter, Voltmeter With S / S, Ct, R / Y / B & On / Off Indication And O / G With On / Off Indication, All Motor Feeders Consisting With Mccb / Mpcb, Contactor, O / L Relay { As Per Type 2 Coordination } , On / Off / Trip Indication, Local / Remote S / S, Start / Stop Pb, 1No. Mcb ) ( L&T, Siemens / Equivalent ) ( The Panel Will Be Floor Mounting, Free Standing, Compartmentalizing Type, Constructed With 2 / 1.6Mm Thick Crca Sheet, Ip:54 With Powder Coated Panting Shade: Ral 7035 ) ( Make Of Mccb / Mpcb, Contactor, O / L Relay, Mcb : L&T / Siemens / Equivalent, Led Indication Lamp / Pb / Ss : Siemens / Teknic / Kaycee / Equivalent, Mfm : Schneider / Equivalent, Ameter / Voltmeter : Ae / Rishabh / Equivalent ) N ( I ) Incoming Feeders - 250 A Tp + N, Mccb With O / C, S / C Protection, Extended Rotary Handle, Aux. Contact - 1 No. ( Make-L&T / Siemens / Equivalent ) . N ( Ii ) Outgoing Feeders - ( A ) 32A Tpn Mcb For New Boiler Fo Fired 850Kg / Hr Boiler - 4 Nos. ( B ) 6Kw Heater Feeder ( 32A Tp Mcb, Contactor And Temperature Controller For Heater For Fo Pre-Heating - 4 Nos. ( C ) 2Hp Dol Motor Starter Feeder For Mono-Block Pump - 4 Nos. ( D ) Lighting Feeder ( Consisting Of - 6Nos. 16A Dp Mcb ) - 1No. ( Make-L&T / Siemens / Equivalent ) N ( Iii ) Supply Of Separate 1 No. 250A Mccb For Main Mcc Panel 98 Supply Of 3.5 Core 120 Sq Mm Xlpe Insulated & Pvc Sheathed Aluminium Conductor Armoured U.G. Power Cable Of 1100 V Grade Conforming To Is 7098 ( Part I ) Along With Cable Gland Double Compression Type And Cable Lug ( Aluminium ) As Per Site Requirement 99 Supply Of 4 Core 10 Sq Mm Xlpe Insulated & Pvc Sheathed Aluminium Conductor Armoured U.G. Power Cable Of 1100 V Grade Conforming To Is 7098 ( Part I ) Along With Cable Gland Double Compression Type And Cable Lug ( Aluminium ) As Per Site Requirement 100 Supply Of 3 Core 2.5 Sq Mm Pvc Insulated & Pvc Sheathed Copper Conductor Unarmoured Submersible Flat Power Cable Of 1100 V Grade Conforming To Is 8130 Along With Cable End Termination And Cable Lug ( Copper ) As Per Site Requirement 101 Design, Procurement, Manufacturing, Testing & Supply Of 50 Kl Ms Tank 3500 Mm Dia X 5250 Mm Height With Accessories 102 Supply Of Diesel Operated Pump Set Complete In All Respect I.E. Comprising Pump, Motor Of 1450 Rpm, Pin Bush Type Coupling, Coupling Guard, Common Base Frame, Cushy Foot Mounting, And Foundation. Na ) Fire Pump Of Capacity 2280 Lpm – ( 137 M3 / Hr ) ( Make-Kirloskar / Ksb / Greaves ) 103 Supply Of Pump Set Complete In All Respect I.E. Comprising Pump, Motor Of 1450 Rpm, Pin Bush Type Coupling, Coupling Guard, Common Base Frame, Cushy Foot Mounting, And Foundation. Nb ) Jockey Pump Of Capacity 180 Lpm. ( Make-Kirloskar / Ksb / Greaves ) 104 Supply Of Pressure Switch With Guide Valve And Pressure Damper Including Necessary Fitting. 105 Supply Of Combined Starting Panel For Above Four Nos. Pump Set, With Star-Delta Type Starter For Fire Pump & D.O.L. Type Starter For Jockey Pump. 106 Supply Of Pressure Gauge ( 100Mm Dia & 0 To 15 Kg / Sq.Cm ) With Guide Valve And Pressure Damper Including Necessary Fittings. 107 Supply Of Single Headed Oblique Type Hydrant Valve ( Alloy Steel ) As Per Is: 5290 With Pvc Blank Cap. 108 Supply Of 63Mm X 15 Mtr. Long Hose As Per Is: 8423, Bounded With Pair Of Steel Coupling As Per Is: 903. 109 Supply Of Front Glassed Single Door Powder Coated M.S.Hose Box ( 16 X 18 Swg ) Of Standard Design To Accommodate One Branch Pipe With Nozzle And 2 Lengths Of 63Mm X 15 Mtr. Long Hose. 110 Supply Of C.I. Flanged Gate Valve As Per Is: 14846, Pn 1.6 Of 100Mm Nb 111 Supply Of C.I. Flanged Non Return Valve As Per Is: 5312, Pn 1.6 Of 100Mm Nb 112 Supply Of Aboveground / Underground M.S. Piping Conforming To Is: 1239 / 3589 With Fitting, Support, Clamp And Treatment On Outer Surface By One Coat Of Primer & Two Coats Of Synthetic Enamel Red Paint For 100Mm Nb, M.S., Medium ( Schedule 40 ) 113 Supply Of Aluminium Armoured Cable For Supply To Panel ( Size – 3C X 95 Sq. Mm. ) 114 Supply Of Aluminium Armoured Cable For Supply Panel To Motor ( Size – 3C X 50 Sq. Mm. ) 115 Supply Of Mono Block Pump Set To Fill The Water Tank ( Pump Rating – 1 Hp, 2900 Rpm, Single Phase, 220 V ) 116 Supply Of Gi Pipe For Water Tank Inlet Pipeline 1” 117 Supply Of Earthing Material I.E. Gi Pipe, Charcoal, Aluminium Strip, Salt Etc. 118 Supply Of 300 Ltr. Ss Kettle With Agitator With 2 Way Ball Valve 40 Nb- 2Nos, 2 Way Ball Valve 25 Nb- 2Nos 119 Supply Of Screw Pump, Rdaa 492 Of Make Roto Pumps Ltd Or Suitable Centrifugal Pump For Transferring Kettel To Tank And 2.0 Hp Tefc, Ip 55 Motor With Suitable Gear Box And Coupling And Base Plate. 120 Supply Of 25 Nb Pipe, Moc Ss 304 Necessary Nozzel, Bend , Valve Etc 121 Supply Of Hdpe Day Tanks Of 3 Kl Capacity 122 3-Ph, 50Hz, 415V, Rated Current 800A, S.C. Current 16 / 25 / 50Ka, 1 Sec Mcc ( Main Mcc In Mcc Room ( Panel 1 ) With Ip54 Protection With Aluminium Bus Bar Consisting Of Following Feeders, Mcc / Pdb ( I / C Feeders Are Consisting Of Digital Ammeter, Digital Voltmeter , C / T, Mfm, R / Y / B & On / Off Indication And O / G With On / Off / Trip Indication ) ( L&T / Siemens / Equivalnt ) ( Floor Mounting, Free Standing, Compartmentalizing Type, Constructed With 2 / 1.6Mm Thick Crca Sheet, With Powder Coated Panting Shade : Ral 7035 ) A ) Incoming Feeders - 800A, 4P 50Ka Mdo Acb With Microprossor Based Released - 2 No. ( I / C From 315Kva Transformer & I / C From D.G Set ) . B ) Bus Coupler Feeders - 800A, 4P, 50Ka Mdo Acb With Microprossor Based Released - 1No., C ) Outgoing Feeders - 630A Tp, Mccb With O / C, S / C Protection ( Microprossor ) , Extended Rotary Handle, Aux. & Trip Alarm Contact- 2 Nos, & 400A Tp, Mccb With O / C, S / C Protection ( Microprossor ) , Extended Rotary Handle, Aux. & Trip Alarm Contact- 3 Nos, & 160A Tp, Mccb With O / C, S / C Protection ( Microprossor ) , Extended Rotary Handle, Aux. & Trip Alarm Contact- 3 Nos & 100A Tp, Mccb With O / C, S / C Protection ( Microprossor ) , Extended Rotary Handle, Aux. & Trip Alarm Contact- 1 No. & 63A Tp, Mccb With O / C, S / C Protection ( Microprossor ) , Extended Rotary Handle, Aux. & Trip Alarm Contact- 2 Nos. & 32A Tp, Mccb With O / C, S / C Protection ( Thermal Magnetic ) , Extended Rotary Handle, Aux. & Trip Alarm Contact- 1 No. 123 3-Ph, 50Hz, 440V, 260 Kvar Capacitor Panel ( Panel 8 ) In Mcc Room With Ip54 Protection With Aluminium Bus Bar Consisting Of Following Feeders, ( L&T / Siemens / Equivalnt ) ( Floor Mounting, Free Standing Compartmentalizing Type, Constructed With 2 / 1.6Mm Thick Crca Sheet, With Powder Coated Panting Shade : Ral 7035 ) A ) Incoming Feeders - 630A, Tp 50Ka Mccb With Extended Rotary Handle - 1 No. B ) Outgoing Feeders - 50Kvar - 4 Nos, 25Kvar- 1 No., 15Kvar - 1 No., 10Kvar - 1 No., 5Kvar - 1 No. ( The Capacitor Panel Will Be With 7 Stage Automatic Power Factor Correction Relay And Auto / Manual Provision And Each Bank Feeder Consist With Suitable Rated Fuse, Capacitor Duty Contactor, Push Button, Led Indication Lamp, Timer Etc. 124 Boiler Area Mcc ( Panel 2 ) ( 3-Ph, 50Hz, 415V, Rated Current 160A, S.C. Current 16 / 25 / 50Ka, 1 Sec Mcc With Ip54 Protection With Aluminium Bus Bar Consisting Of Following Feeders, Mcc / Pdb ( I / C Feeders Are Consisting Of Digital Ammeter, Digital Voltmeter, Ct, R / Y / B & On / Off / Trip Indication And O / G With On / Off / Trip Indication, All Motor Feeders Consisting With Mccb / Mpcb, Contactor, O / L Relay, On / Off / Trip Indication, Local / Remote S / S, Start / Stop Pb, 1No. Mcb ) ( L&T, Siemens / Equivalent ) ( Floor Mounting, Free Standing, Compartmentalizing Type, Constructed With 2 / 1.6Mm Thick Crca Sheet, With Power Coated Panting Shade: Ral 7035 ) A ) Incoming Feeders - 160A 50 Ka 4 Pole, Mccb With O / C, S / C Protection ( Thermal Magnetic ) , Extended Rotary Handle, Aux. Contact- 1 No, B ) Outgoing Feeders - 16A 50 Ka 4 Pole, Mccb With O / C, S / C Protection ( Thermal Magnetic ) , Extended Rotary Handle, Aux. Contact- 6 Nos & 32A 50 Ka 3 Pole, Mccb With O / C, S / C Protection ( Thermal Magnetic ) , Extended Rotary Handle, Aux. Contact- 6 Nos For Lighting Feeder. 125 Process Area - I Mcc ( Panel 3 ) ( 3-Ph, 50Hz, 415V, Rated Current 400A S.C. Current 16 / 25 / 50Ka, 1 Sec Mcc With Ip54 Protection With Aluminium Bus Bar Consisting Of Following Feeders, Mcc / Pdb ( I / C Feeders Are Consisting Of Digital Ammeter, Digital Voltmeter , Ct, R / Y / B & On / Off / Trip Indication And O / G With On / Off / Trip Indication, All Motor Feeders Consisting With Mccb / Mpcb, Contactor, O / L Relay, On / Off / Trip Indication, Local / Remote S / S, Start / Stop Pb, 1No Mcb ) ( L&T, Siemens / Equivalent ) ( Floor Mounting, Free Standing, Compartmentalizing Type, Constructed With 2 / 1.6Mm Thick Crca Sheet, With Power Coated Panring Shade: Ral 7035 ) A ) Incoming Feeders - 400A, 4P, Mccb With O / C, S / C Protection ( Microprocessor ) , Extended Rotary Handle, Aux. Contact - 1No. B ) Outgoing Feeders- 15 Kw Star / Dalta Motor Starter Feeder - 6 Nos. & 7.5 Kw Star / Delta Motor Starter Feeder - 9 Nos., 125 A 3 Pole 50 Ka Mccb With Thermal Magnetic Realease- 2 Nos. & 32 A 3 Pole 50 Ka Mccb With Thermal Magnetic Realease- 2 Nos For Lighting Feeder. 126 Process Area - 2 Mcc ( Panel 4 ) ( 3-Ph, 50Hz, 415V, Rated Current 400A S.C. Current 16 / 25 / 50Ka, 1 Sec Mcc With Ip54 Protection With Aluminium Bus Bar Consisting Of Following Feeders, Mcc / Pdb ( I / C Feeders Are Consisting Of Digital Ammeter, Digital Voltmeter , Ct, R / Y / B & On / Off / Trip Indication And O / G With On / Off / Trip Indication, All Motor Feeders Consisting With Mccb / Mpcb, Contactor, O / L Relay, On / Off / Trip Indication, Local / Remote S / S, Start / Stop Pb, 1No Mcb ) ( L&T, Siemens / Equivalent ) ( Floor Mounting, Free Standing, Compartmentalizing Type, Constructed With 2 / 1.6Mm Thick Crca Sheet, With Power Coated Panring Shade: Ral 7035 ) A ) Incoming Feeders - 400A, 4P, Mccb With O / C, S / C Protection ( Microprocessor ) , Extended Rotary Handle, Aux. Contact - 1No. B ) Outgoing Feeders- 7.5 Kw Star / Dalta Motor Starter Feeder - 9 Nos., 5.5 Kw Dol Motor Starter Feeder - 3 Nos., 3.7 Kw Dol Motor Starter Feeder - 7 Nos., 2.2 Kw Dol Motor Starter Feeder - 4 Nos., 1.5 Kw Dol Motor Starter Feeder - 9 Nos., 100 A 3 Pole 50 Ka Mccb With Thermal Magnetic Realease- 3 Nos. & 32 A 3 Pole 50 Ka Mccb With Thermal Magnetic Realease- 5 Nos For Lighting Feeder. 127 Fire Pump And Repair Shop Panel Mcc ( Panel 5 ) ( 3-Ph, 50Hz, 415V, Rated Current 400A S.C. Current 16 / 25 / 50Ka, 1 Sec Mcc With Ip54 Protection With Aluminium Bus Bar Consisting Of Following Feeders, Mcc / Pdb ( I / C Feeders Are Consisting Of Digital Ammeter, Digital Voltmeter , Ct, R / Y / B & On / Off / Trip Indication And O / G With On / Off / Trip Indication, All Motor Feeders Consisting With Mccb / Mpcb, Contactor, O / L Relay, On / Off / Trip Indication, Local / Remote S / S, Start / Stop Pb, 1No Mcb ) ( L&T, Siemens / Equivalent ) ( Wall / Floor Mounting, Free Standing, Compartmentalizing Type, Constructed With 2 / 1.6Mm Thick Crca Sheet, With Power Coated Panring Shade: Ral 7035 ) A ) Incoming Feeders - 160A, 4P, Mccb With O / C, S / C Protection ( Thermal Magnetic ) , Extended Rotary Handle, Aux. Contact - 1No. B ) Outgoing Feeders- 37 Kw Star / Dalta Motor Starter Feeder - 2 Nos., 5.5 Kw Dol Motor Starter Feeder - 3 Nos., 125 A 3 Pole 50 Ka Mccb With Thermal Magnetic Realease- 2 Nos. & 6 A Spmcb- 2 Nos For Lighting Feeder. 128 Office Area Utility Panel ( Panel 6 ) ( 3-Ph, 50Hz, 415V, Rated Current 400A S.C. Current 16 / 25 / 50Ka, 1 Sec Mcc With Ip54 Protection With Aluminium Bus Bar Consisting Of Following Feeders, Mcc / Pdb ( I / C Feeders Are Consisting Of Digital Ammeter, Digital Voltmeter , Ct, R / Y / B & On / Off / Trip Indication And O / G With On / Off / Trip Indication, All Motor Feeders Consisting With Mccb / Mpcb, Contactor, O / L Relay, On / Off / Trip Indication, Local / Remote S / S, Start / Stop Pb, 1No Mcb ) ( L&T, Siemens / Equivalent ) ( Wall / Floor Mounting, Free Standing, Compartmentalizing Type, Constructed With 2 / 1.6Mm Thick Crca Sheet, With Power Coated Panring Shade: Ral 7035 ) A ) Incoming Feeders - 100A, 50 Ka, 4P, Mccb With O / C, S / C Protection ( Thermal Magnetic ) , Extended Rotary Handle, Aux. Contact - 1No. B ) Outgoing Feeders- 63 A 3 Pole 50 Ka Mccb With Thermal Magnetic Realease- 2 Nos. & 32 A 3 Pole 50 Ka Mccb With Thermal Magnetic Realease- 2 Nos. For Lighting Feeder. 129 Repair Shop Panel ( Panel 7 ) ( 3-Ph, 50Hz, 415V, Rated Current 63A S.C. Current 16 / 25 / 50Ka, 1 Sec Mcc With Ip54 Protection With Aluminium Bus Bar Consisting Of Following Feeders, Mcc / Pdb ( I / C Feeders Are Consisting Of Digital Ammeter, Digital Voltmeter , Ct, R / Y / B & On / Off / Trip Indication And O / G With On / Off / Trip Indication, All Motor Feeders Consisting With Mccb / Mpcb, Contactor, O / L Relay, On / Off / Trip Indication, Local / Remote S / S, Start / Stop Pb, 1No Mcb ) ( L&T, Siemens / Equivalent ) ( Floor / Wall Mounting, Free Standing, Compartmentalizing Type, Constructed With 2 / 1.6Mm Thick Crca Sheet, With Power Coated Panring Shade: Ral 7035 ) A ) Incoming Feeders - 63A, 50 Ka, 4P, Mccb With O / C, S / C Protection ( Thermal Magnetic ) , Extended Rotary Handle, Aux. Contact - 1No. B ) Outgoing Feeders - 32 A 3 Pole 50 Ka Mccb With Thermal Magnetic Realease- 5 Nos., 2.2 Kw Dol Motor Starter Feeder - 2 Nos. & 1.5 Kw Dol Motor Starter Feeder - 2 Nos. 130 Supplying And Fixing Of Following Ways Surface / Recess Mounting, Vertical Type, 415 V, Tpn Mcb Distribution Board Of Sheet Steel, Dust Protected, Duly Powder Painted, Inclusive Of 200 A Tinned Copper Bus Bar, Common Neutral Link, Earth Bar, Din Bar For Mounting Mcbs ( But Without Mcbs And Incomer ) As Required . ( Note: Vertical Type Mcb Tpdb Is Normally Used Where 3 Phase Outlets Are Required. ) A ) 8 Way ( 4 + 24 ) , Double Door 131 Supplying And Fixing Following Way, Horizontal Type Three Pole And Neutral, Sheet Steel, Mcb Distribution Board, 415 V, On Surface / Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. ( But Without Mcb / Rccb / Isolator ) A ) 4 Way ( 4 + 12 ) , Double Door 132 Supplying And Fixing Following Way, Horizontal Type Three Pole And Neutral, Sheet Steel, Mcb Distribution Board, 415 V, On Surface / Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. ( But Without Mcb / Rccb / Isolator ) B ) 6 Way ( 4 + 18 ) , Double Door 133 Supplying And Fixing 5 A To 32 A Rating, 240 / 415 V, 10 Ka, “C” Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. A ) 63 A 4 Pole 10 Ka Mcb 134 Supplying And Fixing 5 A To 32 A Rating, 240 / 415 V, 10 Ka, “C” Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. B ) 32 A 4 Pole 10 Ka Mcb 135 Supplying And Fixing 5 A To 32 A Rating, 240 / 415 V, 10 Ka, “C” Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. C ) 16 A 3 Pole 10 Ka Mcb 136 Supplying And Fixing 5 A To 32 A Rating, 240 / 415 V, 10 Ka, “C” Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. D ) 16 A Single Pole 10 Ka Mcb 137 Supplying And Fixing 5 A To 32 A Rating, 240 / 415 V, 10 Ka, “C” Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. E ) 10 A Single Pole 10 Ka Mcb 138 Supplying And Fixing 5 A To 32 A Rating, 240 / 415 V, 10 Ka, “C” Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. F ) 6 A Single Pole 10 Ka Mcb 139 Supply Of D.P. Structure Using 2 Nos. 11 Mtr. Long ( 200 Mm X 100 Mm X 5.7 Mm Thick ) M.S. Joist / Beam As Vertical Members Including Their Cross Arms Made Up From M.S. Channel ( 75 Mm X 40 Mm X 4.8 Mm Thick ) And Supplying The Following Accessories As Required. A ) Supplying Of Three Piece Nonlinear Resistor Type Lightning Arrestor Suitable For 3 Wire, 11 Kv Overhead Lines With Rated Voltage 9 Kv ( Rms ) With A Nominal Discharge Current Rating Of 5 Ka And Complete With Galvanised Clamping Arrangement, G.I. Bolts, Nuts, Washers Etc. As Required. B ) 11 Kv, 400 Amp. A.B. Switch ( 3 Posts, Vertical Type ) - 1 Set C ) 400 Amps Rated Horn Gap Fuse ( 3 Nos ) - 1 Set D ) Pin Insulator E ) Acsr Wire 140 Supplying Of 3 X 120 Sq Mm Xlpe Insulated & Pvc Sheathed Aluminium Conductor Armoured U.G. Power Cable Of 11 Kv Grade ( E ) Conforming To Is 7098 ( Part-Ii ) As Required. 141 Supplying Of Cable End Termination With Heat Shrinkable Jointing Kit Complete With All Accessories Including Lugs Suitable For Following Size Of Xlpe Aluminium Conductor Cable Of 11 Kv Grade As Required. A ) Outdoor Type For 3 X 120 Sq Mm 142 Supplying Of Cable End Termination With Heat Shrinkable Jointing Kit Complete With All Accessories Including Lugs Suitable For Following Size Of Xlpe Aluminium Conductor Cable Of 11 Kv Grade As Required. B ) Indoor Type For 3 X 120 Sq Mm 143 Supplying Of 3.5 Core 185 Sq Mm Xlpe Insulated & Pvc Sheathed Aluminium Conductor Armoured U.G. Power Cable Of 1100 V Grade Conforming To Is 7098 ( Part-I ) Along With Cable Gland Double Compression Type And Cable Lug ( Aluminium ) As Per Site Requirement. 144 Supplying Of 3.5 Core 150 Sq Mm Xlpe Insulated & Pvc Sheathed Aluminium Conductor Armoured U.G. Power Cable Of 1100 V Grade Conforming To Is 7098 ( Part-I ) Along With Cable Gland Double Compression Type And Cable Lug ( Aluminium ) As Per Site Requirement. 145 Supplying Of 3.5 Core 120 Sq Mm Xlpe Insulated & Pvc Sheathed Aluminium Conductor Armoured U.G. Power Cable Of 1100 V Grade Conforming To Is 7098 ( Part-I ) Along With Cable Gland Double Compression Type And Cable Lug ( Aluminium ) As Per Site Requirement. 146 Supplying Of 3.5 Core 70 Sq Mm Xlpe Insulated & Pvc Sheathed Aluminium Conductor Armoured U.G. Power Cable Of 1100 V Grade Conforming To Is 7098 ( Part-I ) Along With Cable Gland Double Compression Type And Cable Lug ( Aluminium ) As Per Site Requirement. 147 Supplying Of 3.5 Core 50 Sq Mm Xlpe Insulated & Pvc Sheathed Aluminium Conductor Armoured U.G. Power Cable Of 1100 V Grade Conforming To Is 7098 ( Part-I ) Along With Cable Gland Double Compression Type And Cable Lug ( Aluminium ) As Per Site Requirement. 148 Supplying Of 3.5 Core 35 Sq Mm Xlpe Insulated & Pvc Sheathed Aluminium Conductor Armoured U.G. Power Cable Of 1100 V Grade Conforming To Is 7098 ( Part-I ) Along With Cable Gland Double Compression Type And Cable Lug ( Aluminium ) As Per Site Requirement. 149 Supplying Of 3.5 Core 25 Sq Mm Xlpe Insulated & Pvc Sheathed Aluminium Conductor Armoured U.G. Power Cable Of 1100 V Grade Conforming To Is 7098 ( Part-I ) Along With Cable Gland Double Compression Type And Cable Lug ( Aluminium ) As Per Site Requirement. 150 Supplying Of 3 Core 35 Sq Mm Xlpe Insulated & Pvc Sheathed Aluminium Conductor Armoured U.G. Power Cable Of 1100 V Grade Conforming To Is 7098 ( Part-I ) Along With Cable Gland Double Compression Type And Cable Lug ( Aluminium ) As Per Site Requirement. 151 Supplying Of 3 Core 16 Sq Mm Xlpe Insulated & Pvc Sheathed Aluminium Conductor Armoured U.G. Power Cable Of 1100 V Grade Conforming To Is 7098 ( Part-I ) Along With Cable Gland Double Compression Type And Cable Lug ( Aluminium ) As Per Site Requirement. 152 Supplying Of 3 Core 4 Sq Mm Xlpe Insulated & Pvc Sheathed Aluminium Conductor Armoured U.G. Power Cable Of 1100 V Grade Conforming To Is 7098 ( Part-I ) Along With Cable Gland Double Compression Type And Cable Lug ( Aluminium ) As Per Site Requirement. 153 Supplying Of 4 Core 10 Sq Mm Xlpe Insulated & Pvc Sheathed Aluminium Conductor Armoured U.G. Power Cable Of 1100 V Grade Conforming To Is 7098 ( Part-I ) Along With Cable Gland Double Compression Type And Cable Lug ( Aluminium ) As Per Site Requirement. 154 Supplying Of 4 Core 6 Sq Mm Xlpe Insulated & Pvc Sheathed Aluminium Conductor Armoured U.G. Power Cable Of 1100 V Grade Conforming To Is 7098 ( Part-I ) Along With Cable Gland Double Compression Type And Cable Lug ( Aluminium ) As Per Site Requirement. 155 Supplying Of 3 Core 2.5 Sq Mm Pvc Insulated & Pvc Sheathed Aluminium / Copper Conductor Unarmoured Submerssiable Flat Power Cable Of 1100 V Grade Conforming To Is 8130 Along With Cable End Termination And Cable Lug ( Copper ) As Per Site Requirement. 156 Supplying Of 3 Core 1.5 Sq Mm Xlpe Insulated & Pvc Sheathed Aluminium / Copper Conductor Armoured U.G. Power Cable Of 1100 V Grade Conforming To Is 7098 ( Part-I ) Along With Cable Gland Double Compression Type And Cable Lug ( Copper ) As Per Site Requirement. 157 Supplying Of 4 Core 1.5 Sq Mm Xlpe Insulated & Pvc Sheathed Aluminium / Copper Conductor Armoured U.G. Power Cable Of 1100 V Grade Conforming To Is 7098 ( Part-I ) Along With Cable Gland Double Compression Type And Cable Lug ( Copper ) As Per Site Requirement. 158 Local Push Button Control Station ( Wall / Structure Mounting, Non-Copartmentalizing Type, Constructed With 2 / 1.6Mm Thick Crca Sheet, With Powder Coated Panting Shade : Ral 7035 ) - Start Pb With 2No Contact - 1 No. & Stop Pb With 1No+1Nc Contact - 1 No. & 2.5Sq. Mm. Control Terminal - 6 Nos. 159 Supply Of 6 Dia Gi Pipe ( Medium Isi Mark ) For Cable Protection 160 Earthing Material - 40X6 Mm G.I Earth Flat 161 Earthing Material - 8 Swg G.I Wire 162 Earthing Material - 3 Dia 3Mtr. Gi Pipe With Wire Mesh & Clamp 163 Earthing Material - 600 Mm X 600 Mm X 5 Mm Thick Copper Plate As Per Is 3043 : 1987. 164 Lightning Protection - 45Degree G.I Air Terminal With 25 Mm Gi Pipe As Per Requirement. 165 Lightning Protection - 25X3 Mm G.I Down Conductor 166 Materials For Wiring For Light Point / Fan Point / Exhaust Fan Point / Call Bell Point With 1.5 Sq.Mm Fr Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Steel Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm. Fr Pvc Insulated Copper Conductor Single Core Cable Etc As Required. 167 Materials For Wiring For Twin Control Light Point With 1.5 Sq.Mm Fr Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Steel Conduit, 2 Way Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm. Fr Pvc Insulated Copper Conductor Single Core Cable Etc As Required. 168 Materials For Wiring For Circuit / Submain Wiring Alongwith Earth Wire With The Following Sizes Of Fr Pvc Insulated Copper Conductor, Single Core Cable In Surface / Recessed Steel Conduit As Required A ) 2 X 1.5 Sq. Mm + 1 X 1.5 Sq. Mm Earth Wire 169 Materials For Wiring For Circuit / Submain Wiring Alongwith Earth Wire With The Following Sizes Of Fr Pvc Insulated Copper Conductor, Single Core Cable In Surface / Recessed Steel Conduit As Required B ) 4 X 1.5 Sq. Mm + 2 X 1.5 Sq. Mm Earth Wire 170 Materials For Wiring For Circuit / Submain Wiring Alongwith Earth Wire With The Following Sizes Of Fr Pvc Insulated Copper Conductor, Single Core Cable In Surface / Recessed Steel Conduit As Required C ) 6 X 1.5 Sq. Mm + 3 X 1.5 Sq. Mm Earth Wire 171 Supplying And Fixing Stepped Type Electronic Fan Regulator On The Existing Modular Plate Switch Box Including Connections But Excluding Modular Plate Etc. As Required. 172 Supplying And Fixing Suitable Size Gi Box With Modular Plate And Cover In Front On Surface Or In Recess, Including Providing And Fixing 3 Pin 5 / 6 Amps Modular Socket Outlet And 5 / 6 Amps Modular Switch, Connection Etc. As Required. ( For Light Plugs To Be Used In Non Residential Buildings ) . 173 2X20 / 22W Led Batten With Suitable Led Tube Light ( M / S Havells Model Regal Batten Or Cg / Philips / Bajaj / Wipro Make Ss Model ) 174 Supplying 1400 Mm Sweep Ceilling Fan W / O Regulator And With All Other Accessories Suitable For Operation On 220 V 50 Hz Single Phase Ac Supply. ( M / S Havells Make Model No. Pacer / Velocity Or S.S Model Of Bajaj / Crompton / Usha ) . 175 Supplying Of 400Mm Sweep Wall Mounted Exhaust Fan With All Other Accessories Suitable For Operation On 220 V 50 Hz Single Phase Ac Supply ( M / S M / S Havells / Comptron / Bajaj / Usha Make ) 176 Materials For Wiring For Ac / Power Plug With 2X4 Sq. Mm Fr Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Steel Conduit Alongwith 1 No 4 Sq. Mm Fr Pvc Insulated Copper Conductor Single Core Cable For Loop Earthing As Required. 177 Supplying And Fixing 20 Amps, 240 Volts, Spn Industrial Type, Socket Outlet, With 2 Pole And Earth, Metal Enclosed Plug Top Alongwith 20 Amps C Curve, Sp, Mcb, In Sheet Steel Enclosure, On Surface Or In Recess, With Chained Metal Cover For The Socket Out Let And Complete With Connections, Testing And Commissioning Etc. As Required. 178 Materials For Wiring For 3 Phase Power Plug With 4X4 Sq. Mm Fr Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Steel Conduit Alongwith 2 Nos 4 Sq. Mm Fr Pvc Insulated Copper Conductor Single Core Cable For Loop Earthing As Required. 179 Supplying Of 32 Amps, 415 Volts, Tpn Industrial Type, Socket Outlet, With 4 Pole And Earth, Metal Enclosed Plug Top Alongwith 32 Amps C Curve, Tpmcb, In Sheet Steel Enclosure, On Surface Or In Recess, With Chained Metal Cover For The Socket Out Let And Complete With Connections, Testing And Commissioning Etc. As Required. 180 Supplying Following Size Of Perforated Pre-Painted M.S. Cable Trays With Perforation Not More Than 17.5%, In Convenient Sections, Joined With Connectors, Suspended From The Ceiling With M.S. Suspenders Including Bolts & Nuts, Painting Suspenders Etc As Required. A ) 150 Mm Width X 50 Mm Depth X 1.6 Mm Thickness 181 Supplying Following Size Of Perforated Pre-Painted M.S. Cable Trays With Perforation Not More Than 17.5%, In Convenient Sections, Joined With Connectors, Suspended From The Ceiling With M.S. Suspenders Including Bolts & Nuts, Painting Suspenders Etc As Required. B ) 300 Mm Width X 50 Mm Depth X 1.6 Mm Thickness 182 Supplying Of 165W Led Flood Complete Light Set Of Ip65 And Operating Voltage 140 - 270 V Ac ( Make : Philips ( Cat No. Bvp410 Led 165 Cw He Sy20 Fg S3 Xtfc ) / Cropmton / Bajaj / Equivalent ) 183 Supply Of 9 Litres Capacity Fire Buckets With Inscription Of? Fire? Signal Red Colour I / C Filling Of Sand , P / F Hooks, Clamps Etc Required. ( 1 Set = 3 Nos. ) 184 S / F 4.5 Kg Co2 Type Fire Extinguisher With Suitable Hose Pipe And Hook Etc As Required. ( Isi Marked ) 185 S / L Of 6 Mm Thick Rubber Mat Suitable For Mv / Hv Supply ( Class- B Category ) As Required. ( Isi Marked ) 186 Supply Of 250 Kva Diesel Generating Set With Required Accessories As Per The Detailed Specification In Annexure-A & Annexure-B Along With Necessary Multistrand Armoured Cable ( Approx 40 Mtrs. ) Suitable For Connecting Incoming Supply From Dg Set With Amf And Mcc Panel Along With Exhaust Gas Piping With Necessary Fittings And Accessories As Required 187 Supply Of Amf Panel ( Automatic Main Failure ) For Auto Start / Stop With Required Accessories Suiting To The Above Dg Set Mentioned In Annexure-A & Annexure-B 188 Earthing Material - 18 X 18 X 5 Mm Thick Copper Plate Of Electrolytic Grade As Per Is 3043 189 Earthing Material - 3 Dia 4 Mtr Gi Pipe With Fuunnel & Wire Mesh & Clamp For Earth Pit As Per Is 3043 190 Earthing Material - 50X6 Mm G.I Earth Flat. 191 Cable Protection Pipe - 3 Dia 3 Mtr. Gi Pipe For Protection Of Cables ( Tata / Equivalent ) . 192 Supply Of High Mast Tower ( 25 Mtr. Height ) Suitable For 12 Set Of 200 W Led Flood Light Fittings ( Design Standard I.L.E. Technical Support No. 7:2000, Material Equivalent To Bsen10025, Hot Deep Galvanization To Is: 4759 ) ( Make: Utkarsh / Bajaj ) With Power Feeder Box ( Outdoor Type ) Including Motor Timer & All Electrical And Electronics Materials, Interconnection Suitable For Power Feeder And Operation Of 25 Mtr. High Mast Tower And 12 Set Of 200 W Led Light ( Make: Crompton / Greaves ) 193 Cable 1100V Grade Multistrand Armoured Cable As Per Is: 7098 ( Part 1 ) / 1988 Along With Cable Gland Double Compression Type And Cable Lug ( Aluminium ) As Per Site Requirement – 3C X 6 Sqmm Al.Xlpe Cable ( Make: Havells ) 194 Cable 1100V Grade Multistrand Armoured Cable As Per Is: 7098 ( Part 1 ) / 1988 Along With Cable Gland Double Compression Type And Cable Lug ( Aluminium ) As Per Site Requirement – 4C X 10 Sqmm Al.Xlpe Cable ( Make: Havells ) 195 Earthing Material – 8 Swg Gi Wire 196 4Mp Ip Camera - 1 / 3# Cmos , H265 & H264 197 4K Ip Fixed Bullet Camera - 1.8 8Mp 198 4K Ip Motorized Bullet Camera 199 2Mp 30X Starlight Ir Ptz Network Camera 200 64 Ch Nvr - Intel Processor 201 64 Ch Nvr For Display In Gourd Room 202 Surveillance Hard Disk 8Tb 203 Led Tv Fhd 49 204 Led Tv Fhd 42 205 4 Port Giga Poe With 2 Uplink Gigalan 206 8 Port Giga Poe With 2 Uplink Sfp Port 207 Armourd Cat 6 Cable 208 1Kva Online Ups With 9Ah Battery 209 Ip 67 Enclosure Outdoor Box 210 Server Rack With Accessorise 211 Armoured 3 Core Cable 1.5 Sqmm 212 Hdpe Pipe 32Mm 213 Fabricated Gi Pole - Cctv 214 Chemical Earthing Pit 50Mm 2Mt. 215 Ethernet Lan Surge Protector Rj-45 216 Supply Of Air Compressor 3Hp 217 Supply Of Car Washer 218 Supply Of Pvc Overhead Tank 219 Supply Of Water Pump And Related Plumbing For Supply Of Water To Overhead Tank From Underground Tank 220 Providing Services Of Borewell Drilling And Supply Of Pump For Borewell. 221 Ph Meter: ( Like Toshniwal / Sisco Or Other Reputed Make ) 222 Water Bath: ( Reputed Make ) 223 Hotplate: ( Reputed Make ) 224 Flash Point Apparatus: ( Abel ) 225 Lab Stirrer: ( Reputed Make ) 226 Constant Rpm Stirrer With Following Attachments ( Reputed Make ) 227 The Procurement, Manufacturing, Testing & Supply Of Pit Less Type Electronic Weighbridge 60T Capacity, As Per Technical Specification Given In Brief Scope Of Work 228 Supply And Commissioning Of Diesel Forklift Truck 3000 Kg Capacity As Per Detail Nspecification Given In Brief Scope Of Work 229 Part - B N ( Installation & Commissioning ) 230 Installation & Commissioning Of Ss Hold Tank For Storage Of An / Cn Melt Of 103 Kl Capacity, Moc: Ss-304 L ( Bottom 8 Mm, Shell 6 Mm And Top 5 Mm Thick ) , Size - 4500 Mm Dia X 6750 Mm Height, Tank Will Be Vertical, Cylindrical Flat Bottom & Conical Self-Supported Roof With Proper Sand Leveling, Grouting Along With Electrical Work And Piping Work With Necessary Fittings, Accessories. The Specifications And Requirement Of The Hold Tank And Accessories Will Be As Per The Details Mentioned In Brief Scope Of Work. 231 I&C Of Electrical Work – Laying Of Cable And Electrical Fixtures 232 I&C Of Ss Piping Of 2 Dia Long With Necessary Bends And Fittings For Process Piping With Heat Tracing And Insulation 233 I&C Of Quick Release Coupling Set ( Male And Female ) For 50 Mm Id Suitable For Ss Piping & Flexible Chemical Hose 234 I&C Of Ss304 Flanges 50 Nb Size For Process Piping 235 I&C Of Ss304 Valves 50 Nb Size For Process Piping 236 I&C Of Steam Transfer Piping Of 50 Nb Ms Ibr Seamless Pipe With Insulation And With Necessary Flanges And Pipe Fittings From One Point To Hold Tanks 237 I&C Of 50Nb Valves For Steam Piping 238 I&C Con. Reducer 50 X 40 Nb, Ss-304L, #150 239 I&C Of Float Type 25 Nb Steam Traps 240 Installation Of 80 Kl Storage Tank For Oxidizer Phase ( Op ) Of 4500 Mm Dia X 5000 Mm Straight Height. Material Of Construction - Ss304, Plate Thickness - Shell 6 Mm, Top Cover 5 Mm And Bottom Plate 8 Mm. Vertical, Cylindrical, Flat Bottom, Conical Flanged Top With Supports Welded With 75X75 X8 Mm Angle Ring, The Tank Will Be Complete With 125 Mtrs, 40 Nb Sch 40Spiral Ss304 Coil, In Two Parts For Necessary Steam Heating. It Will Also Be Completed With All Necessary Nozzle, Drain, Vent, Support Lugs, Heat Exchangers, Insulated, Liquid Level Transmitter Having Lcd Display And Suitable Ms Ladder With Railing At The Top And Sampling Point Having An Arrangement Of Two Valves For Drawl Of One Liter Of Sample. 241 I&C Of Electrical Work – Laying Of Cable And Electrical Fixtures 242 I&C Of Ss Piping Of 2 Dia Long With Necessary Bends And Fittings For Process Piping With Heat Tracing And Insulation 243 I&C Of Quick Release Coupling Set ( Male And Female ) For 50 Mm Id Suitable For Ss Piping & Flexible Chemical Hose 244 I&C Of Ss304 Flanges 50 Nb Size For Process Piping 245 I&C Of Ss304 Valves 50 Nb Size For Process Piping 246 I&C Of Steam Transfer Piping Of 50 Nb Ms Ibr Seamless Pipe With Insulation And With Necessary Flanges And Pipe Fittings From One Point To Hold Tanks 247 I&C Of 50Nb Valves For Steam Piping 248 I&C Con. Reducer 50 X 40 Nb, Ss-304L, #150 249 I&C Of Float Type 25 Nb Steam Traps 250 Installation & Commissioning Of 24 Kl Storage & Blending Tank For Oxidizer Phase ( Op ) Of Id Of Tank: 3580Mm, Tank Wall Thickness 6Mm Plus 50Mm Space For Insulation Material All Around The Tank, Thus Total Od Of Tank Shall Be Approx. 3692Mm X Height Of Tank Wall: 2600Mm, Plus Channel Support Of 200Mm At The Tank Base & Top, Thus Total Height Of Tank From Floor Level Shall Be 3000Mm Straight Height. Tank Material Of Construction - Ss304, Plate Thickness - Shell 6 Mm, Flanged Flat Top 4 Mm, Flat Bottom 8 Mm With Ms Channel Support, The Blend Tank Will Be Vertical, Cylindrical, Flat Bottom, Flat Flanged Top, Complete With 90 M, 40 Nb Sch 40 Spiral Ss304 Coil In Two Parts, 90 Mm Dia Shaft Along With 02 Numbers Of Pitch Blade Top Entry Turbine Agitator At Different Depth, 65-70 Rpm With Supports, All Necessary Nozzle, Drain, Vent, Support Lugs And Ms Platform With Railing And Suitable Ladder And 20 Hp, Ip 55, Tefc Motor With Suitable Electrical Power Switch, Gear Box Along With Insulation Of Tank By 50 Mm Thick Glass Wool Pad, Chicken Mesh And Cladding With Aluminium Sheet Of 22 Swg. Height Of Manhole Collar To Be Max 200 Mm So That It Is Within The Height Of Channel Support At The Top Of Tank And It Does Not Interfere During Placement Of Tank. Manhole Size Required Minimum 600 Mm Id At The Top Of Tank For Feeding Of An & Cleaning Of Tank. Providing Feed Hopper To Be Fitted On Manhole Having Square Shape ( Approx. 1M X1m ) At Top And With Bottom Dia Equivalent To Manhole Dia With Fixing Arrangement With Nut & Bolts Of Ss Is Required For All Tanks. 251 Installation & Commissioning Of Ss304 Flanges 50Nb For Above Process Piping 252 Installation & Commissioning Of Ss304 Valves 50 Nb Size For Above Process Piping 253 Installation & Commissioning Of Electrical Work – Laying Of Cable - Approx. 3Ø Power Supply To Electrical Fixtures Attached To Blend Tanks, Pumps And Boilers 254 Installation & Commissioning Of Flexible Chemical Hose For Oxidizer Phase Unloading And Transfer Line - 50 Mm Id, Is:7654 Type1 With Quick Release End Fittings Of Bj Or Any Other Suitable Better Make 255 Installation & Commissioning Of Quick Release Coupling Set ( Male And Female ) For 50 Mm Id Flexible Chemical Hose - Of Bj Corporation Make Or Equivalent 256 Installation & Commissioning Of Insulated Steam Transfer Piping Of 40Nb Ms Pipe With Flanges And Pipe Fittings Form Supply Line To The Proposed Blend Tanks 257 Installation & Commissioning Of Insulated Steam Transfer Piping Of 25Nb Ms Ibr Seamless Pipe With Flanges And Pipe Fittings For Recovery Of Condensates 258 Installation & Commissioning Of 40Nb Valves For Steam Piping 259 Installation & Commissioning Of 25Nb Valves For Steam Piping 260 Installation & Commissioning Of Float Type 25 Nb Steam Traps 261 Installation & Commissioning Of Storage Tank ( Moc-Ms ) Of 40 Kl Capacity With Additional Provision For 5% Air Space , Moc-Is 2062, Size-3600 Mm Dia X 4000 St. Ht. . The Tank Will Be Vertical, Cylindrical, Flat Bottom And Conical Top To Be Fabricated From Is 2062 Quality Plates. Shell & Top Will Be From 6 Mm Thk Plates And Bottom Will Be 8 Mm Thick. Complete With Steam Heating Coil Of Approx. 80 Mtrs. Of 25 Nb Sch 10 Ms Pipe Coil. The Tank Will Be Completed With Necessary Drain, Vent Etc. The Tank Will Be Insulated By 50 Mm Thick Glass Wool Pad, Chicken Mesh And Cladding With Aluminium Sheet Of 22 Swg Along With Suitable Ladder & Railing With Ms Structure With Anticorrosive Paint Along With Walkway Over The Tanks By Gratings / Chequered Plate. Walkway Of Both Tanks Will Be Interconnected. 2 Nos. Lightning Arrester With 2 Nos. Earth Pit And Suitable Foundation. I&C Of Motor Starter Panel / Box And Cable Laying Underground Including Excavation, Sand Cushioning, Protective Covering And Refilling The Trench Or On Cable Tray As Per Side Condition Including End Termination With Necessary Glands And Lugs For The Items Mentioned In Part-A Item No. 140 And 141. 262 Installation & Commissioning Of Oil Pipe - 80 Nb Dia, Ms Pipe Along With Necessary Valves And Fitting And Strainers For Unloading Of Furnace Oil Tankers Along With Necessary Supports, Hooks And Grouting Etc 263 Installation & Commissioning Of Gear Pump Of Capacity 300 Lpm With Flame Proof Motor With Suction And Discharge Port Of 2 Along With Base Frame And Suitable Foundation For The Pump 264 Installation & Commissioning Of Oil Pipe- 2 Dia, Ms Along With 04 Nos. Valves And Fitting With Heat Tracing And Insulation Along With Necessary Supports, Hooks And Grouting Etc 265 Installation & Commissioning Of Steam Transfer Piping Of 50 Nb Ms Ibr Seamless Pipe With Insulation And With Necessary Flanges And Pipe Fittings Along With Necessary Supports, Hooks And Grouting Etc 266 Installation & Commissioning Of 50Nb Valves For Steam Piping 267 Installation & Commissioning Of Insulated Steam Transfer Piping Of 25Nb Ms Pipe With Flanges And Pipe Fittings For Condensate Along With Necessary Supports, Hooks And Grouting And Underground Laying Etc 268 Installation & Commissioning Of 25Nb Valves For Steam Piping 269 Installation & Commissioning Of Float Type 25 Nb Steam Traps 270 Installation & Commissioning Of Fuel Phase ( Fp ) Blend Tank, 2.5 Kl Capacity, 1350 Mm Dia X 1800 Mm Height, Material Of Construction - Is 2062, Plate Thickness - Shell And Top 5 Mm, Bottom Dish 6 Mm, The Blend Tank Will Be Vertical, Cylindrical, Dished Bottom, Flat Flanged Top, Complete With 20 M, 25 Nb Sch 40 Spiral Coil, 50 Mm Dia Shaft Along With Pitch Blade Turbine Agitator, With All Necessary Nozzle Drain, Vent, Support Legs & Ladder And 2 Hp Tefc, Ip 55 Motor And Suitable Gear Box For Driving Turbine Agitator And Load Cell With Least Count Of 1 Kg And Max Net Weight Carrying Capacity Of 3000 Kg. Installation & Commissioning Of Temperature Controller With Suitable Arrangement To Maintain Temperature Of Fuel Phase In The Range Of 40-60° C. 271 Installation & Commissioning Of Basket Strainer For Oxidiser Phase , 75 Ltrs Capacity, Make Of Construction - Vessel Ss 304 And Jacket Is 2062, Vessel Shell 5 Mm, Bottom Dish 6 Mm, Top Plate 6 Mm, Jacket Shell 5 Mm, Dish 6 Mm, The Strainer Will Be Vertical, Cylindrical, Dished Bottom, Flat Flanged Top Jacketed Vessel Complete With Perforated Strainer With 18 Mesh Ss Filter Cloth, Inlet / Outlet Nozzle, Drain Etc. 272 Installation & Commissioning Of Basket Strainer For Fuel Phase - 50 Ltrs Capacity, Material Of Construction Ss 304, Plate Thickness - Vessel Shell 5 Mm, Bottom Dish 6 Mm, Top Plate 6 Mm, Jacket Shell 5 Mm, Dish 6 Mm, The Strainer Will Be Vertical, Cylindrical, Dish Bottom, Flat Flanged Top, Jacketed Vessel Complete With Perforated Strainer With 18Mesh Ss Filter Cloth, Inlet / Outlet Nozzle, Drain Etc. 273 Installation & Commissioning Of Screw Pump, Rmab 601 Of Make Roto Pumps Ltd Or Any Other Suitable Better Make For Transferring Oxidizer Phase To Blender And 7.5 Hp Tefc, Ip 55 Motor With Suitable Gear Box And Coupling And Base Plate Along With Suitable Foundation For The Pump 274 Installation & Commissioning Of Screw Pump, Rdaa 492 Of Make Roto Pumps Ltd Or Any Other Suitable Better Make / Gear Pump For Transferring Fuel Phase To Blender And 2.0 Hp Tefc, Ip 55 Motor With Suitable Gear Box And Coupling And Base Plate Along With Suitable Foundation For The Pump 275 Installation & Commissioning Of Emulsion Blender Of 150 Kg / Min Capacity, 208 Mm O / D X 458 Mm Long, Material Of Construction - Body Of Aluminium 8 Mm, Rod 9.5 Mm, Rotating Shaft Ss 410, 28.5 Mm Dia, Blades Ss 410, 5 Mm Thick, Blender Will Be Horizontal Cylindrical Complete With Series Of Pin And Rotating Shaft Complete With Shear Blades, End Bearing With Seals And 25 Hp Tefc, Ip 55 Motor With Suitable Gear Box And Coupling Base Plate 276 Installation & Commissioning Of Control Panel Comprising Of Variable Frequency Drive ( Vfd ) Panel Consisting Of Danfoss Or Equivalent Make Frequency Converter Suitable For Three Phase 415 Volts Motor Of Following Capacity A ) 7.5 Hp , B ) 2.0 Hp, C ) 25 Hp, D ) 7.5 Hp Along With Rpm Indicators 277 Installation & Commissioning Of Inline Magnetic Flow Meter / Mass Flow Meter For Ob Ss 304, Range 60 - 150 Lpm Of Ie Or Equivalent Make. 278 Installation & Commissioning Of Inline Magnetic Flow Meter / Mass Flow Meter For Fp Ss 304 Range 5 - 20 Lpm Of Ie Or Equivalent Make 279 Installation & Commissioning Of Screw Pump- Wmaa 602 Of Roto Pumps Ltd Or Any Other Suitable Better Make For Transfer Of Emulsion Matrix From Product Pump To Silo And 7.5 Hp Tefc, Ip 55 Motor With Suitable Gear Box And Coupling And Base Plate Along With Suitable Foundation For The Pump 280 Installation & Commissioning Of Control Panel Along With Safety Device Units ( High Pressure, Low Pressure Switches, High Temperature Cut-Off Switch & Pressure Gauge, Rupture Disc ) For Emulsion Transfer Pump 281 Installation & Commissioning Of Flexible Chemical Hose For Oxidizer Phase Unloading And Transfer Line - 50 Mm Id, Is:7654 Type1 With Quick Release End Fittings Of Bj Or Any Other Suitable Better Make 282 Installation & Commissioning Of Furnace Oil / Hsd Unloading And Transfer Line With Suction Line Of 50 Nb & Delivery Line Of 40 Nb, Sch 10, Material Of Construction Ms As Per Site Requirement Along With Necessary Supports, Hooks And Grouting Etc 283 Installation & Commissioning Of Oxidizer Phase -Filter - Screw Pump - Flow Meter Line With Suction Line 65 Nb & Delivery Line Of 50 Nb, Sch 10, Material Of Construction Ss 304 As Per Site Requirement Along With Necessary Supports, Hooks And Grouting Etc 284 Installation & Commissioning Of Flexible Chemical Hose For Oxidizer Phase - Flow Meter - Blender Line - 50 Mm Id, Is:7654 Type1 With Quick Release End Fittings Of Bj Or Any Other Suitable Better Make 285 Installation & Commissioning Of Fuel Phase ( Fp ) - Filter - Pump - Flow Meter Line With Suction Line 50 Nb & Delivery Line 25 Nb, Moc Ss 304 Along With Necessary Supports, Hooks And Grouting Etc 286 Installation & Commissioning Of Fuel Phase - Flow Meter - Blender - 1.0 Inch Flexible Hose Of Gates Make Or Equivalent With Both Ends Fitted With Quick Coupler Of Bj Or Any Other Suitable Better Make Along With Necessary Supports, Hooks And Grouting Etc 287 Installation & Commissioning Of Emulsion Matrix Transfer Line From Blender To Silo - 65 Nb Sch 10 Ss 304 Along With Necessary Supports, Hooks And Grouting Etc 288 Installation & Commissioning Of Quick Release Coupling Set ( Male And Female ) For Fixing 50 Mm Id Transfer Hoses With Blend Tank Outlet - Of Bj Corporation Make Or Equivalent 289 Installation & Commissioning Of Ss 304 Three Way Ball Valve 65 Mm Between Emulsion Matrix Transfer Line From Blender To Silo 290 Installation & Commissioning Of Gear Pump Of Capacity 300 Lpm With Flame Proof Motor With Suction And Discharge Port Of 2 Along With Base Frame And Suitable Foundation For The Pump 291 Installation & Commissioning Of Silo For Storage Of Emulsion Matrix Of 24 Kl ( 30T ) Capacity, Moc-Is 2062, Size-3000 Mm Dia X 3000 Mm Height X 750 Mm Conical Height, Silo Will Be Vertical, Cylindrical, Conical Bottom And Top Complete With All Necessary Nozzle, Vent, Support Bracket, With Suitable Platform With Ladder To Access The Various Inlets / Outlets At The Top Of The Silo Along With Insulation Of 50 Mm Thick Glass Wool Pad, Chicken Mesh And Cladding With Aluminium Sheet Of 22 Swg And Concrete Foundation 292 Installation & Commissioning Of Digital Load Cells ( Mettler Toledo Make ) For Silo 293 Installation & Commissioning Of Control Panel Along With Safety Device Units ( High Pressure, Low Pressure Switches, High Temperature Cut-Off Switch & Pressure Gauge, Rupture Disc ) For Emulsion Transfer Pump 294 Installation & Commissioning Of 2.5 Inch Id Flexible Hose Of Gates Make Or Equivalent With Both Ends Fitted With Quick Coupler Of Bj Make 295 Installation & Commissioning Of Emulsion Matrix Transfer Line From Hopper Of Screw Pump To Pump Trucks And Emulsion Tanker To Silo - 65 Nb Sch 10 Ss 304. 296 Installation & Commissioning Of Ss 304 Flanges For Above Process Piping 297 Installation & Commissioning Of Ss 304 Valves For Above Process Piping 298 Installation & Commissioning Of Quick Release Coupling Set ( Male And Female ) For 50 Mm Id Flexible Chemical Hose - Of Bj Corporation Make Or Equivalent Along With Suitable 1 No. Dust Cap 299 Installation & Commissioning Of Control Panel Along With Safety Device Units ( High Pressure, Low Pressure Switches, High Temperature Cut-Off Switch & Pressure Gauge, Rupture Disc ) For Emulsion Transfer Pump 300 Installation & Commissioning Of Rotary Gear Pump With Impeller Nitrile Rubber With Electric Motor And Suitable Gear Box Make: Napco Or Equivalent Capacity :3’’ -400 Lpm, Discharge :10 Bar 301 Installation & Commissioning Of Single Roll Crusher Of Capacity 15-16 Mt / Hr For Crushing High Density Ammonium Nitrate Lumps ( Bag Size ) 750 Mm X 500 Mm X 250 Mm With Opening Of The Crusher 900 Mm ( Approx ) X 550 Mm ( Approx ) And Output Size 40 Mm Approx Along With Suitable Drive And Motor And Starting Panel And Supply Cable And Necessary Safety Features Including Providing Of Suitable Civil & Structural Foundation And Suitable Placement Of Tail End Of The Conveyor And Support System Along With Charge Hopper Above The Crusher Opening And Platform For Keeping Pallets Of Hdan And Space For Manual Charging Of Bags In To Crusher As Per The Details Mentioned In Brief Scope Of Work. 302 Installation & Commissioning Of High Density Ammonium Nitrate Conveying System Through A Belt Conveyor Of Width 800-1000 Mm & Cd Of Approx 35-40 M Along With Skirting Arrangement On Both Edges Of The Conveyor And Suitable Drive, Motor, Starting Panel And Supply Cable And Necessary Safety Features Along With 4 Nos. Discharge Points / Ploughs For Feeding 4 Nos. Blend Tanks Falling In The Discharge Zone Of Around 25M. ( The Tanks Are Of Dia 3692 Mm-Od With A Centre To Centre Gap Of 5000 Mm Between The Tanks ) With Total Lift Requirement Of Around 3M From Tail End To Discharge Zone Including Providing Of Suitable Civil & Structural Foundation For Supporting The Conveyor System Along With Side Walk Ways As Per The Details Mentioned In Brief Scope Of Work. 303 Installation And Commissioning Of Fo Fired Boiler Unit Rxd-850 ( 850 Kg / Hr ) Working Pressure Of 10.54 Kg / Cm2 With Economizer Of Thermax Make Only Along With Necessary Electrical Items Supply And Installation 304 Installation And Commissioning Of Softner Ez30 Of Thermax Make Only 305 Installation And Commissioning Of Filter Ez40 Fdm Of Thermax Make Only 306 Installation And Commissioning Of Oxidation Chamber- E Z200c Of Thermax Make Only 307 Installation And Commissioning Of Mild Steel Chimney ( Self Supported ) Of 300 Mm Top Diameter And 18 Mtrs Height ( Approx ) Along With Flue Gas Duct With Supporting Nstructure, Sampling Collection Point, Platform For Collection & Spiral Ladder Up Nto Collection Point And Ladder From Collection Point To Top - To Cater 2 Nos Of 850 Kg / Hr Boilers Including Appropriate Civil Foundation For The Chimney To Withstand The Load And Necessary Supports Including Duct Piping From Boilers To Chimney, Lightning Arrester And Light Indicator Over Chimney With 2 Nos. Earth Pit And Suitable Foundation 308 Installation And Commissioning Of Pressure Reducing Station, Range- In Let Pressure 10.54 Kg / Cm2, Out Let Pressure 3.5 Kg / Cm2 Max, Steam Flow-Max. 3000 Kg / Hr, Body-C.S, Inlet Size-80Mm, Outlet-100Mm With Cast Steel Valve Prv Size 50Mm Flange Class Asa 150 As Per Site Requirement Along With Necessary Supports, Hooks & Grouting Etc 309 Installation And Commissioning Of Ms Day Tank For Fo - 3 Kl Capacity ( Round Tank With 5 Mm Plate ) With Level Indicator, 2 Nos Of 6Kw Heaters Along With Temp. Controller And Cut Off Switch, Necessary Electrical Supply & Connection Along With Ms Piping From Day Tank To Boilers Along With Necessary Ms Overhead Platform With Foundation Of Suitable Size And Height With Ladder As Necessary For Housing Of Fo Tank As Per Site Requirement 310 Installation And Commissioning Of 4 Nos Of Hdpe Day Tanks For Soft Water Of 3 Kl Capacity Each, Along With Ms Piping From Day Tank To Boilers Along With Necessary Ms Overhead Platform With Foundation Of Suitable Size And Height With Ladder As Necessary For Housing Of Hdpe Tank As Per Site Requirement 311 Installation And Commissioning Of Insulated Steam Header Piping 6 Ms Ibr Seamless Pipe Thickness 8Mm With Air Vent, Pressure Relief, Safety Valve, Pressure Gauge And Draining Of Steam Condensate Through Steam Trap, 2 Nos Outlet For 2 Nos Prs With Provision Of Suitable Length With Flanges And Pipe Fittings Along With Nrv 4 Nos In Between Boiler Output And Steam Header With Necessary Bend And Fittings For Catering Steam Output From 4 Nos Boilers 850 Kg / Hr Each And 3 Nos More Points For Future Expansion In Same Header ( With A Provision For Up Gradation To 6000 Kg / Hr ) 312 Installation And Commissioning Of Steam Transfer Piping Of 50 Nb Ms Ibr Seamless Pipe With Insulation And With Necessary Flanges And Pipe Fittings From Boiler Outlet / Steam Header To Prs To Blend Tanks Along With Necessary Supports, Hooks And Grouting Overhead / Underground Laying Etc 313 Installation And Commissioning Of Insulated Steam Transfer Piping Of 80Nb Ms Pipe With Flanges And Pipe Fittings For Recovery Of Condensate From Blend Tanks To Condensate Recovery Tank Along With Necessary Supports, Hooks And Grouting Overhead / Underground Laying Etc 314 Installation And Commissioning Of Insulated Steam Transfer Piping Of 25Nb Ms Pipe With Flanges And Pipe Fittings For Steam Supply / Condensate Collection Along With Necessary Supports, Hooks And Grouting Overhead / Underground Laying Etc 315 Installation And Commissioning Of 50Nb Valves For Steam Piping 316 Installation And Commissioning Of 25Nb Valves For Steam Piping 317 Installation And Commissioning Of Float Type 25 Nb Steam Traps 318 Installation And Commissioning Of Water Line - 2 Dia, Gi, Class B Along With Necessary Valves And Fittings As Per Site Requirement Along With Necessary Supports, Hooks And Grouting Overhead / Underground Laying Etc 319 Installation And Commissioning Of Water Line - 1 Dia, Gi, Class B Along With Necessary Valves And Fittings As Per Site Requirement Along With Necessary Supports, Hooks And Grouting Overhead / Underground Laying Etc 320 Installation And Commissioning Of Furnace Oil - 1.5 Dia, Ms Along With Necessary Valves, And Fitting With Heat Tracing And Insulation Along With Necessary Support Post And Structure To Run Overhead / Arrangement To Run Underground 321 Installation And Commissioning Of Furnace Oil - 1 Dia, Ms Along With Necessary Valves, And Fitting With Heat Tracing And Insulation Along With Necessary Support Post And Structure To Run Overhead / Arrangement To Run Underground 322 Installation And Commissioning Of Monoblock Pump 2Hp, Connection Size 2 For Delivery Up To Height Approx 40 Feet - Reputed Make Like Kirloskar / Ksb Or Equivalent 323 Preparation, Approval Of Necessary Drawings / Layout Plans & Liaison For Obtaining Statutory Permissions, Through “A” Or “B” Class Electrical Competency Holder Or From Concerned Authority As Applicable, From Concerned Authorities ( If Applicable ) ( Applicable Statutory Fees Shall Be Payable By Iocl ) And Installation & Commissioning Of Items Mentioned At Sl. No. 1.195 Of Part-A With Necessary Support Base And Structures Etc 324 Laying And Connection Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size Direct In Ground Including Excavation, Sand Cushioning, Protective Covering And Refilling The Trench Etc As Required Including End Termination With Necessary Glands And Lugs On Cable Tray / In The Existing Masonry Open Duct / On Wall Surface As Required. A ) Above 35 Sq. Mm And Upto 185 Sq. Mm. Sl. No. 1.196 325 Laying And Connection Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size Direct In Ground Including Excavation, Sand Cushioning, Protective Covering And Refilling The Trench Etc As Required Including End Termination With Necessary Glands And Lugs On Cable Tray / In The Existing Masonry Open Duct / On Wall Surface As Required. A ) Upto 35 Sq. Mm. Sl. No. 1.197 & 1.198 326 Installation, Testing & Commissioning Of Diesel Operated Pump Set Complete In All Respect I.E. Comprising Pump, Motor Of 1450 Rpm, Pin Bush Type Coupling, Coupling Guard, Common Base Frame, Cushy Foot Mounting, And Foundation. Na ) Fire Pump Of Capacity 2280 Lpm – ( 137 M3 / Hr ) ( Make-Kirloskar / Ksb / Greaves ) 327 Installation, Testing & Commissioning Of Pump Set Complete In All Respect I.E. Comprising Pump, Motor Of 1450 Rpm, Pin Bush Type Coupling, Coupling Guard, Common Base Frame, Cushy Foot Mounting, And Foundation. Nb ) Jockey Pump Of Capacity 180 Lpm. ( Make-Kirloskar / Ksb / Greaves ) 328 Installation & Commissioning Of Pressure Switch With Guide Valve And Pressure Damper Including Necessary Fitting. 329 Installation & Commissioning Of Combined Starting Panel For Above Four Nos. Pump Set, With Star-Delta Type Starter For Fire Pump & D.O.L. Type Starter For Jockey Pump. 330 Installation & Commissioning Of Pressure Gauge ( 100Mm Dia & 0 To 15 Kg / Sq.Cm ) With Guide Valve And Pressure Damper Including Necessary Fittings. 331 Installation & Commissioning Of Single Headed Oblique Type Hydrant Valve ( Alloy Steel ) As Per Is: 5290 With Pvc Blank Cap. 332 Installation & Commissioning Of 63Mm X 15 Mtr. Long Hose As Per Is: 8423, Bounded With Pair Of Steel Coupling As Per Is: 903. 333 Installation & Commissioning Of Front Glassed Single Door Powder Coated M.S. Hose Box ( 16 X 18 Swg ) Of Standard Design To Accommodate One Branch Pipe With Nozzle And 2 Lengths Of 63Mm X 15 Mtr. Long Hose. 334 Installation & Commissioning Of C.I. Flanged Gate Valve As Per Is: 14846, Pn 1.6 Of 100Mm Nb 335 Installation & Commissioning Of C.I. Flanged Non Return Valve As Per Is: 5312, Pn 1.6 Of 100Mm Nb 336 Installation & Commissioning Of Aboveground / Underground M.S. Piping Conforming To Is: 1239 / 3589 With Fitting, Support, Clamp And Treatment On Outer Surface By One Coat Of Primer & Two Coats Of Synthetic Enamel Red Paint For 100Mm Nb, M.S., Medium ( Schedule 40 ) 337 Installation & Commissioning Of Mono Block Pump Including Base Frame And Protection Shed, Gi Pipe, Earth Pit Etc. 338 Construction Of Shed Consisting Iron Channel Fitted Iron Profile Sheet Size: 4 Mtr X 2.5 Mtr. Including Rcc Foundation Of Pump Base 339 I&C Of 300 Ltr. Ss Kettle With Agitator With 2 Way Ball Valve 40 Nb- 2Nos, 2 Way Ball Valve 25 Nb- 2Nos 340 I&C Of Screw Pump, Rdaa 492 Of Make Roto Pumps Ltd Or Suitable Centrifugal Pump For Transferring Kettel To Tank And 2.0 Hp Tefc, Ip 55 Motor With Suitable Gear Box And Coupling And Base Plate. 341 I&C Of 25 Nb Pipe, Moc Ss 304 Necessary Nozzel, Bend , Valve Etc 342 I&C Of Hdpe Day Tanks Of 3 Kl Capacity 343 Preparation, Approval Of Necessary Drawings / Layout Plans & Liaison For Obtaining Statutory Permissions, Through A Or B Class Electrical Competency Holder, From Concerned Authorities ( Applicable Statutory Fees Shall Be Payable By Iocl ) Installation & Commissioning Of Items Mentioned At Sl. No. 1.220 To 1.236 Of Part-A ( Boq1 ) With Necessary Support Base And Structures Etc 344 Preparation, Approval Of Necessary Drawings / Layout Plans & Liaison For Obtaining Statutory Permissions, Through A Class Electrical Competency Holder, From Concerned Authorities ( Applicable Statutory Fees Shall Be Payable By Iocl ) Installation & Commissioning Of Items Mentioned At Sl. No. 1.237 Of Part-A ( Boq1 ) With Necessary Support Base And Structures Etc 345 Laying And Connection Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size Direct In Ground Including Excavation, Sand Cushioning, Protective Covering And Refilling The Trench Etc As Required Including End Termination With Necessary Glands And Lugs On Cable Tray / In The Existing Masonry Open Duct / On Wall Surface As Required. A ) Upto 35 Sq. Mm 346 Laying Of One Number Additional Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size Direct In Ground In The Same Trench In One Tier Horizontal Formation Including Excavation, Sand Cushioning, Protective Covering And Refilling The Trench Etc As Required Including End Termination With Necessary Glands And Lugs On Cable Tray / In The Existing Masonry Open Duct / On Wall Surface As Required. A ) Upto 35 Sq. Mm 347 Laying And Connection Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size Direct In Ground Including Excavation, Sand Cushioning, Protective Covering And Refilling The Trench Etc As Required Including End Termination With Necessary Glands And Lugs On Cable Tray / In The Existing Masonry Open Duct / On Wall Surface As Required. A ) Above 35 Sq. Mm And Upto 185 Sq. Mm 348 Laying Of One Number Additional Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size Direct In Ground In The Same Trench In One Tier Horizontal Formation Including Excavation, Sand Cushioning, Protective Covering And Refilling The Trench Etc As Required Including End Termination With Necessary Glands And Lugs On Cable Tray / In The Existing Masonry Open Duct / On Wall Surface As Required. A ) Above 35 Sq. Mm And Upto 185 Sq. Mm 349 Laying And Connection Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size Direct In Ground Including Excavation, Sand Cushioning, Protective Covering And Refilling The Trench Etc As Required Including End Termination With Necessary Glands And Lugs On Cable Tray / In The Existing Masonry Open Duct / On Wall Surface As Required. A ) Upto 185 Sq. Mm 350 Installation & Commissioning Of Items Mentioned At Sl. No. 1.258 To 1.263 Of Part-A ( Boq1 ) And Testing & Commissioning Of Earth Pit Complete In All Respects Like Earthing Plate, Gi Pipe, Aluminium Strip, Charcoal & Salt Etc And Laying & Connections Of Earth Flat / Gi Wire And Lightning Protection And Fixing Of Lighting Poles And Connections Testing Etc. 351 Installation & Commissioning Of Items Mentioned At Sl. No. 1.264 To 1.277 And 1.280 Of Part-A ( Boq1 ) All Wiring For Light & Sockets Including Necessary Civil Modification And Grouting Etc. 352 Installation & Commissioning Of Items Mentioned At Sl. No. 1.278 And 1.279 Of Part-A ( Boq1 ) Ms Cable Tray Including Necessary Civil Foundation, Grouting And Welding With Iron Angle Supports. 353 Erection, Testing & Commissioning Of Outdoor, Silent Type 250 Kva Diesel Generating Set As Per Technical Specification Of Oem Or Manufacturer Of Dg Set Along With Amf And Exhaust Gas Piping With Necessary Fittings And Accessories As Required And Installation Of Suitable Cable ( Approx 40 Mtrs. ) For Connecting Incoming Supply From Dg Set With Amf And Mcc Panel Including Arrangement Of Load Testing ( Diesel Required For Load Testing Will Be Supplied By Iocl ) 354 Civil Works For Construction Of Base Platform For Housing The Dg Set Outdoor Nearby The Main Mcc Panel Room 355 Preparation, Approval Of Necessary Drawings / Layout Plans & Liaison For Obtaining Statutory Permissions, Through A Or B Class Electrical Competency Holder As Applicable, From Concerned Authorities ( Applicable Statutory Fees Shall Be Payable By Iocl ) And Installation & Commissioning Of Items Mentioned At Sl. No. 1.286 To 1.289 Of Part-A ( Boq1 ) Along With Lying Of Cables By Making Suitable Trenches / Through Piping At Road Crossing / Critical Areas For Underground Cable Laying And Cable Connections With Necessary Glands And Lugs And End Connections To Synchronize The Dg Supply With Mcc Panel And Making Of Earth Pits ( 4 Nos. As Mentioned In Boq1 ) Complete In All Respects Like Earthing Plate, Gi Pipe, Gi Strip, Charcoal & Salt Etc Including Earth Pit Resistance Testing & Certification And Lying & Connections Of Earth Flat / Gi Wire Etc. 356 Preparation, Approval Of Necessary Drawings / Layout Plans & Liaison For Obtaining Statutory Permissions, Through A Or B Class Electrical Competency Holder As Applicable, From Concerned Authorities ( Applicable Statutory Fees Shall Be Payable By Iocl ) Installation & Commissioning Of Items Mentioned At Sl. No. 1.290 To 1.293 Of Part-A ( Boq1 ) Along With Construction Of Civil Foundation & Grouting For High Mast Tower. 357 I&C Of All Cctv Items I.E. Sl. No. 1.294 To 1.313 358 I&C Of Misc Items Mentioned In Sl. No. 1.314 To 1.318 359 I&C Of All Lab Equipments Mentioned In Sl. No. 1.319 To 1.324 360 Installation & Commissioning And Stamping Charges Of Pit Less Type Electronic Weighbridge 60T Capacity, As Per Technical Specification Given In Brief Scope Of Work 361 Construction Of Civil Foundation And Ramp For 60 Mt Weigh Bridge

Sr No	CorrigendumDate	Corrignedum	CorrigendumType	NewSubmissionDate
1	03-Aug-2021	Date Extension	Date	05-08-2021

Refer document

Refer document

Refer document

Name of Work: The System Design, Manufacturing, Testing, Supply, Installation and Commissioning of Plant & Machinery Equipment, Electrical and other related Works for setting up of Proposed Site Mixed Bulk Explosives Plant at Umrer, Dist: Nagpur (MH).
	Sl. No.	Item Description	Item Code / Make	Quantity	Units
1	1	PART - A (SUPPLY)	ITEMCODE 1
2	1.1	Supply of SS Hold Tank for Storage of AN/CN Melt of 103 KL capacity, MOC: SS-304 L (Bottom 8 mm, Shell 6 mm and Top 5 mm thick), size - 4500 mm dia X 6750 mm height, tank will be vertical, cylindrical flat bottom & conical self-supported roof with proper sand leveling, grouting along with Electrical Work and Piping Work with necessary fittings, accessories. The specifications and requirement of the Hold Tank and accessories will be as per the details mentioned in "Brief Scope of Work". Piston Valve- 50 NB-1 No, Solenoid Actuated Valve -50 NB- 3 Nos,Ball Float Steam Trap -25 NB-4 Nos,Globe Valve-25 NB-4 Nos, 2 way Ball Valve 65 NB- 2Nos, 3 Way Actuator operated Ball Valve 40 NB- 2Nos,2 way Ball Valve 40 NB- 1 No,2 way Ball Valve 25 NB- 2Nos and suitable Centrifugal Pump-1 No.	ITEMCODE 2	1	No.
3	1.101	Supply of Electrical work – Laying of cable and electrical fixtures	ITEMCODE 3	200	Mtr.
4	1.102	Supply of SS piping of 50 NB dia long with necessary bends and fittings for Process Piping with heat tracing and insulation	ITEMCODE 4	100	Mtr.
5	1.103	Supply of Quick Release Coupling set (male and female) for 50 mm ID suitable for SS piping & Flexible Chemical Hose	ITEMCODE 5	3	Each
6	1.104	Supply of SS304 Flanges 50 NB size for Process Piping	ITEMCODE 6	30	No.
7	1.105	Supply of SS304 Valves 50 NB Size for Process Piping	ITEMCODE 7	3	No.
8	1.106	Supply of Steam Transfer Piping of 50 NB MS IBR seamless pipe with insulation and with necessary flanges and pipe fittings from one point to Hold Tanks	ITEMCODE 8	100	Mtr.
9	1.107	Supply of 50NB valves for Steam Piping	ITEMCODE 9	4	No.
10	1.108	CON. Reducer 50 x 40 NB, SS-304L, #150	ITEMCODE 10	4	No.
11	1.109	Supply of float type 25 NB Steam Traps	ITEMCODE 11	4	No.
12	1.11	Supply of 80 KL Storage Tank for Oxidizer Phase (OP) of 4500 mm Dia X 5000 mm Straight Height. Material of Construction - SS304, Plate thickness - Shell 6 mm, top cover 5 mm and bottom plate 8 mm. Vertical, cylindrical, flat bottom, conical flanged top with supports welded with 75X75 X8 mm Angle Ring, The tank will be complete with 125 Mtrs, 40 NB SCH 40spiral SS304 coil, in two parts for necessary steam heating. It will also be completed with all necessary nozzle, drain, vent, support lugs, heat exchangers, insulated, liquid level transmitter having LCD display and suitable MS Ladder with railing at the top and Sampling Point having an arrangement of two valves for drawl of one liter of sample. Piston Valve 50 NB-2 Nos,Solenoid Actuated Valve 50 NB-4 NoS,Solenoid Actuated Valve 50 NB-4 NoS,Globe Valve -25 NB-6 Nos, 3 Way Actuator operated Ball Valve 40 NB- 1No, 2 Way Ball Valve 25 NB- 2Nos,2 Way Ball Valve 80 NB- 2Nos,3 Way Ball Valve 40 NB- 2Nos,3 Actuator Operated Ball Valve 40 NB- 2Nos and suitable Centrifugal Pump-1 No.	ITEMCODE 12	2	No.
13	1.111	Supply of Electrical work – Laying of cable and electrical fixtures	ITEMCODE 13	200	Mtr.
14	1.112	Supply of SS piping of 50 NB dia long with necessary bends and fittings for Process Piping with heat tracing and insulation	ITEMCODE 14	150	Mtr.
15	1.113	Supply of Quick Release Coupling set (male and female) for 50 mm ID suitable for SS piping & Flexible Chemical Hose	ITEMCODE 15	3	Each
16	1.114	Supply of SS304 Flanges 50 NB size for Process Piping	ITEMCODE 16	50	No.
17	1.115	Supply of SS304 Valves 50 NB Size for Process Piping	ITEMCODE 17	6	No.
18	1.116	Supply of Steam Transfer Piping of 50 NB MS IBR seamless pipe with insulation and with necessary flanges and pipe fittings from one point to Hold Tanks	ITEMCODE 18	150	Mtr.
19	1.117	Supply of 50NB valves for Steam Piping	ITEMCODE 19	4	No.
20	1.118	CON. Reducer 50 x 40 NB, SS-304L, #150	ITEMCODE 20	4	No.
21	1.119	Supply of float type 25 NB Steam Traps	ITEMCODE 21	8	No.
22	1.12	Supply of 24 KL Storage & Blending Tank for Oxidizer Phase (OP) of ID of Tank: 3580mm, Tank wall thickness 6mm plus 50mm space for insulation material all around the tank, thus total OD of tank shall be approx. 3692mm X Height of Tank wall: 2600mm, plus channel support of 200mm at the tank base & top, thus total height of tank from floor level shall be 3000mm Straight Height. Tank Material of Construction - SS304, Plate thickness - Shell 6 mm, Flanged Flat Top 4 mm, Flat Bottom 8 mm with MS Channel Support, the blend tank will be vertical, cylindrical, flat bottom, flat flanged top, complete with 90 m, 40 NB SCH 40 spiral SS304 coil in two parts, 90 mm Dia shaft along with 02 numbers of pitch blade top entry turbine agitator at different depth, 65-70 RPM with supports, all necessary nozzle, drain, vent, support lugs and MS platform with railing and suitable ladder and 20 HP, IP 55, TEFC motor with suitable Electrical Power Switch, Gear Box along with insulation of tank by 50 mm thick glass wool pad, chicken mesh and cladding with Aluminium Sheet of 22 SWG. Height of manhole collar to be max 200 mm so that it is within the height of channel support at the top of tank and it does not interfere during placement of tank. Manhole size required minimum 600 mm ID at the top of tank for feeding of AN & cleaning of Tank. Providing feed hopper to be fitted on manhole having square shape (approx. 1m x1m) at top and with bottom dia equivalent to manhole dia with fixing arrangement with nut & bolts of SS is required for all tanks. Other details are mentioned in Scope of Work.	ITEMCODE 22	3	No.
23	1.121	Supply of SS304 Flanges 50NB for above Process Piping	ITEMCODE 23	12	No.
24	1.122	Supply of SS304 Valves 50 NB Size for above Process Piping	ITEMCODE 24	6	No.
25	1.123	Supply of Electrical work – Laying of cable - approx. 3Ø power supply to electrical fixtures attached to Blend Tanks, Pumps and Boilers	ITEMCODE 25	60	Mtr.
26	1.124	Supply of flexible Chemical Hose for Oxidizer Phase unloading and transfer line - 50 mm ID, IS:7654 Type1 with quick release end fittings of BJ or any other suitable better make	ITEMCODE 26	60	Mtr.
27	1.125	Supply of Quick Release Coupling set (male and female) for 50 mm ID flexible chemical hose - of BJ Corporation Make or equivalent	ITEMCODE 27	6	Set
28	1.126	Supply of Insulated Steam Transfer Piping of 40NB MS pipe with flanges and pipe fittings form supply line to the proposed Blend tanks	ITEMCODE 28	100	Mtr.
29	1.127	Supply of Insulated Steam Transfer Piping of 25NB MS IBR seamless pipe with flanges and pipe fittings for recovery of condensates	ITEMCODE 29	120	Mtr.
30	1.128	Supply of 40NB valves for Steam Piping	ITEMCODE 30	9	No.
31	1.129	Supply of 25NB valves for Steam Piping	ITEMCODE 31	6	No.
32	1.13	Supply of float type 25 NB Steam Traps	ITEMCODE 32	6	No.
33	1.131	Supply of Storage Tank (MOC-MS) of 40 KL capacity with additional provision for 5% air space , MOC-IS 2062, Size-3600 mm dia X 4000 St. Ht. . The tank will be vertical, cylindrical, flat bottom and conical top to be fabricated from IS 2062 quality plates. Shell & Top will be from 6 mm thk plates and bottom will be 8 mm thick. Complete with Steam Heating Coil of approx. 80 mtrs. of 25 NB SCH 10 MS Pipe Coil. The tank will be completed with necessary drain, vent etc. The Tank will be insulated by 50 mm thick glass wool pad, chicken mesh and cladding with Aluminium Sheet of 22 SWG along with suitable Ladder & Railing with MS structure with anticorrosive paint along with Walkway over the tanks by gratings/chequered Plate. Walkway of both tanks will be interconnected. 2 Nos. Lightning arrester with 2 Nos. Earth pit and suitable foundation. Piston Valve 50 NB-2 Nos,Solenoid Actuated Valve 50 NB-4 Nos,Thermo Dynamic Steam Trap 25 NB-4 Nos,Globe Valve 25 NB-4 Nos,3 Way Actuator Operated Ball Valve 50 NB- 1 No, 2 Way Ball Valve 50 NB- 2Nos	ITEMCODE 33	2	No.
34	1.132	Supply of oil pipe - 80 NB Dia, MS pipe along with necessary valves and fitting and strainers for unloading of Furnace oil tankers	ITEMCODE 34	40	Mtr.
35	1.133	Supply of gear pump of capacity 300 LPM with flame proof motor with suction and discharge port of 2"	ITEMCODE 35	2	No.
36	1.134	Supply of oil pipe- 2" Dia, MS along with 04Nos. valves and fitting with heat tracing and insulation	ITEMCODE 36	300	Mtr.
37	1.135	Supply of Steam Transfer Piping of 50 NB MS IBR seamless pipe with insulation and with necessary flanges and pipe fittings	ITEMCODE 37	50	Mtr.
38	1.136	Supply of 50NB valves for Steam Piping	ITEMCODE 38	4	No.
39	1.137	Supply of Insulated Steam Transfer Piping of 25NB MS pipe with flanges and pipe fittings for condensate	ITEMCODE 39	40	Mtr.
40	1.138	Supply of 25NB valves for Steam Piping	ITEMCODE 40	8	No.
41	1.139	Supply of float type 25 NB Steam Traps	ITEMCODE 41	4	No.
42	1.14	MOTOR STARTER PANEL/BOX (3-Ph,50Hz,415V, Rated Current 20A, S.C Current 50KA, 1 Sec MCC with IP54 protection, Starter Rating 10HP DOL, consisting with MCCB/MPCB, Contactor, O/L Relay, On/Off/Trip Indication, Start/Stop PB, 1No. MCB as per Type -2 Co ordination Selection) (Specification: Wall/ Structure mounting, non-compartmentalizing type, constructed with 2/1.6mm thick CRCA Sheet, with Powder coated panting shade: RAL 7035) - L&T/SIEMENS/Standard make and will be feed from Existing Electrical Panel.	ITEMCODE 42	2	No.
43	1.141	Cable 1100V Grade Multi strand Armoured Cable as per IS:7098 (Part-1)/1988 along with Cable Gland Double compression type and Cable Lug (Aluminium) as per site requirement - 4CX16 Sq mm. Al. XLPE CABLE	ITEMCODE 43	200	Mtr.
44	1.142	Supply of Fuel Phase (FP) Blend Tank, 2.5 KL capacity, 1350 mm Dia X 1800 mm height, Material of Construction - IS 2062, Plate thickness - Shell and top 5 mm, Bottom dish 6 mm, the blend tank will be vertical, cylindrical, dished bottom, flat flanged top, complete with 20 m, 25 NB SCH 40 spiral coil, 50 mm Dia shaft along with pitch blade turbine agitator, with all necessary nozzle drain, vent, support legs & ladder and 2 HP TEFC, IP 55 motor and Suitable Gear Box for driving turbine agitator and load cell with least count of 1 kg and max net weight carrying capacity of 3000 kg. Supply of Temperature controller with suitable arrangement to maintain temperature of fuel phase in the range of 40-60° C. Piston Valve 25 NB-2 Nos,Solenoid Actuated Valve 25 NB-2 Nos,Thermo Dynamic Steam Trap 20 NB-2 Nos,Globe Valve 20 NB-2 Nos,2 Way Ball Valve 25 NB- 2Nos, 3 Way Ball Valve 20 NB- 2Nos,Disc Check Valve20 NB- 2Nos	ITEMCODE 44	2	No.
45	1.143	Supply of Basket Strainer for Oxidiser Phase, 75 Ltrs capacity, Make of Construction - Vessel SS 304 and Jacket IS 2062, Vessel Shell 5 mm, bottom dish 6 mm, top plate 6 mm, jacket shell 5 mm, dish 6 mm, the strainer will be vertical, cylindrical, dished bottom, flat flanged top jacketed vessel complete with perforated strainer with 18 mesh SS filter cloth, inlet/outlet nozzle, drain etc.	ITEMCODE 45	2	Set
46	1.144	Supply of Basket strainer for Fuel Phase - 50 Ltrs capacity, material of construction SS 304, plate thickness - vessel shell 5 mm, bottom dish 6 mm, top plate 6 mm, jacket shell 5 mm, dish 6 mm, the strainer will be vertical, cylindrical, dish bottom, flat flanged top, jacketed vessel complete with perforated strainer with 18mesh SS filter cloth, inlet/outlet nozzle, drain etc.	ITEMCODE 46	2	Set
47	1.145	Supply of Screw Pump, RMAB 601 of make Roto Pumps Ltd or any other suitable better make for transferring Oxidizer Phase to Blender and 7.5 HP TEFC, IP 55 motor with suitable Gear Box and Coupling and base plate	ITEMCODE 47	2	Set
48	1.146	Supply of Screw Pump, RDAA 492 of make Roto Pumps Ltd or any other suitable better make / Gear Pump for transferring Fuel Phase to Blender and 2.0 HP TEFC, IP 55 motor with suitable Gear Box and Coupling and base plate.	ITEMCODE 48	2	Set
49	1.147	Supply of Emulsion Blender of 150 Kg/min capacity, 208 mm O/D X 458 mm Long, Material of Construction - Body of Aluminium 8 mm, Rod 9.5 mm, Rotating shaft SS 410, 28.5 mm Dia, Blades SS 410, 5 mm thick, Blender will be Horizontal cylindrical complete with series of pin and rotating shaft complete with shear blades, end bearing with seals and 25 HP TEFC, IP 55 motor with suitable Gear Box and Coupling base plate	ITEMCODE 49	2	Set
50	1.148	Supply of Control Panel comprising of variable frequency drive (VFD) panel consisting of Danfoss or equivalent make frequency converter suitable for three phase 415 Volts motor of following capacity a) 7.5 HP, b) 2.0 HP, c) 25 HP, d) 7.5 HP along with RPM indicators	ITEMCODE 50	2	No.
51	1.149	Supply of Inline Magnetic Flow Meter / Mass Flow Meter for OB SS 304, range 60 - 150 LPM of IE or equivalent make.	ITEMCODE 51	2	No.
52	1.15	Supply of Inline Magnetic Flow Meter / Mass Flow Meter for FP SS 304 range 5 - 20 LPM of IE or equivalent make	ITEMCODE 52	2	No.
53	1.151	Supply of Screw Pump- WMAA 602 of Roto Pumps Ltd or any other suitable better make for transfer of Emulsion Matrix from Product Pump to Silo and 7.5 HP TEFC, IP 55 motor with suitable gear box and coupling and base plate	ITEMCODE 53	2	No.
54	1.152	Supply of Control Panel along with Safety Device Units (High Pressure, Low Pressure switches, High Temperature Cut-off switch & pressure gauge, Rupture disc) for Emulsion Transfer Pump	ITEMCODE 54	2	No.
55	1.153	Supply of flexible Chemical Hose for Oxidizer Phase unloading and transfer line - 50 mm ID, IS:7654 Type1 with quick release end fittings of BJ or any other suitable better make	ITEMCODE 55	80	No.
56	1.154	Supply of Furnace Oil / HSD unloading and transfer line with Suction line of 50 NB & Delivery line of 40 NB, SCH 10, Material of construction MS as per site requirement	ITEMCODE 56	100	Mtr.
57	1.155	Supply of Oxidizer Phase -filter - Screw Pump - flow meter line with suction line 65 NB & delivery line of 50 NB, SCH 10, Material of construction SS 304 as per site requirement	ITEMCODE 57	36	Mtr.
58	1.156	Supply of flexible Chemical Hose for Oxidizer Phase - Flow Meter - Blender line - 50 mm ID, IS:7654 Type1 with quick release end fittings of BJ or any other suitable better make	ITEMCODE 58	20	Mtr.
59	1.157	Supply of fuel Phase (FP) - filter - Pump - flow meter line with suction line 50 NB & delivery line 25 NB, MOC SS 304	ITEMCODE 59	50	Mtr.
60	1.158	Supply of Fuel Phase - Flow Meter - Blender - 1.0 inch flexible hose of Gates make or equivalent with both ends fitted with quick coupler of BJ or any other suitable better make	ITEMCODE 60	20	Mtr.
61	1.159	Supply of Emulsion Matrix transfer line from Blender to Silo - 65 NB SCH 10 SS 304	ITEMCODE 61	70	Mtr.
62	1.16	Supply of Quick Release Coupling set (male and female) for fixing 50 mm ID transfer hoses with Blend tank outlet - of BJ Corporation Make or equivalent	ITEMCODE 62	6	Set
63	1.161	Supply of SS 304 Three Way Ball Valve 65 mm between Emulsion Matrix Transfer Line from Blender to Silo	ITEMCODE 63	2	No.
64	1.162	Supply of gear pump of capacity 300 LPM with flame proof motor with suction and discharge port of 2" for preparation of Fuel Phase, base plate, suitable hopper, starter / panel (as per site condition)	ITEMCODE 64	1	No.
65	1.163	Supply of Silo for Storage of Emulsion Matrix of 24 KL (30T) capacity, MOC-IS 2062, Size-3000 mm dia X 3000 mm height X 750 mm conical height, Silo will be vertical, cylindrical, conical bottom and top complete with all necessary nozzle, vent, support bracket, with suitable platform with ladder to access the various inlets/outlets at the top of the silo along with insulation of 50 mm thick glass wool pad, chicken mesh and cladding with Aluminium Sheet of 22 SWG with Epoxy paint inside Silo. 3 Way Ball Valve 125 NB- 2Nos, Butterfly Valve Actuator Operated 65 NB- 1Nos	ITEMCODE 65	1	No.
66	1.164	Supply of Digital Load Cells (Mettler Toledo make) for Silo	ITEMCODE 66	1	No.
67	1.165	Supply of Control Panel along with Safety Device Units (High Pressure, Low Pressure switches, High Temperature Cut-off switch & pressure gauge, Rupture disc) for Emulsion Transfer Pump	ITEMCODE 67	2	No.
68	1.166	Supply of 2.5 inch ID flexible hose of Gates make or equivalent with both ends fitted with quick coupler of BJ make	ITEMCODE 68	10	Mtr.
69	1.167	Supply of Emulsion Matrix transfer line from Hopper of Screw pump to Pump Trucks and Emulsion Tanker to Silo - 65 NB SCH 10 SS 304.	ITEMCODE 69	60	Mtr.
70	1.168	Supply of SS 304 Flanges for above Process Piping	ITEMCODE 70	20	No.
71	1.169	Supply of SS 304 Valves for above Process Piping	ITEMCODE 71	4	No.
72	1.17	Supply of Quick Release Coupling set (male and female) for 50 mm ID flexible chemical hose - of BJ Corporation Make or equivalent along with suitable 1 no. Dust Cap	ITEMCODE 72	8	Set
73	1.171	Supply of Control Panel along with Safety Device Units (High Pressure, Low Pressure switches, High Temperature Cut-off switch & pressure gauge, Rupture disc) for Emulsion Transfer Pump	ITEMCODE 73	1	No.
74	1.172	Supply of Rotary Gear Pump with Impeller Nitrile Rubber with Electric Motor and Suitable Gear Box Make: NAPCO or equivalent Capacity :3’’ -400 LPM, Discharge :10 Bar	ITEMCODE 74	1	No.
75	1.173	Design & Supply of Single Roll Crusher of capacity 15-16 MT/Hr for crushing High Density Ammonium Nitrate Lumps (bag size) 750 mm x 500 mm x 250 mm with opening of the Crusher 900 mm (approx) x 550 mm (approx) and output size 40 mm approx along with suitable drive and motor and starting panel and supply cable and necessary safety features including providing of suitable civil & structural foundation and suitable placement of tail end of the Conveyor and support system along with charge hopper above the Crusher Opening and platform for keeping pallets of HDAN and space for manual charging of bags in to Crusher as per the details mentioned in brief scope of work.	ITEMCODE 75	1	No.
76	1.174	Design & Supply of High Density Ammonium Nitrate conveying system through a Belt Conveyor of width 800-1000 mm & CD of approx 35-40 m along with skirting arrangement on both edges of the Conveyor and suitable drive, motor, starting panel and supply cable and necessary safety features along with 4 nos. discharge points / ploughs for feeding 4 nos. Blend Tanks falling in the discharge zone of around 20m. (The tanks are of dia 3692 mm-OD with a centre to centre gap of 5000 mm between the Tanks) with total lift requirement of around 3m from tail end to discharge zone including providing of suitable Civil & Structural foundation for supporting the Conveyor System along with side walk ways as per the details mentioned in brief scope of work.	ITEMCODE 76	1	No.
77	1.175	Supply of FO Fired Boiler Unit RXD-850 (850 kg/hr) working pressure of 10.54 kg/cm2 with Economizer of Thermax make only	ITEMCODE 77	2	No.
78	1.176	Supply of Softner EZ30 of Thermax make only	ITEMCODE 78	1	No.
79	1.177	Supply of Filter EZ40 FDM of Thermax make only	ITEMCODE 79	1	No.
80	1.178	Supply of Oxidation Chamber- E Z200C of Thermax make only	ITEMCODE 80	1	No.
81	1.179	Supply of Mild Steel Chimney (self supported) of 300 mm top diameter and 18 Mtrs height (approx) along with flue gas duct with supporting structure, sampling collection point, platform for collection & spiral ladder up to collection point and ladder from collection point to top - to cater 2 nos of 850 Kg/Hr Boilers including duct piping from Boilers to Chimney, Lightning arrester and light indicator over Chimney with 2 Nos. Earth pit and suitable foundation	ITEMCODE 81	1	No.
82	1.18	Supply of Pressure reducing station, Range- In let pressure 10.54 kg/cm2, Out let pressure 3.5 kg/cm2 Max, Steam flow-Max. 3000 kg/hr, Body-C.S, Inlet size-80mm, outlet-100mm with cast steel valve PRV size 50mm Flange Class ASA 150	ITEMCODE 82	1	No.
83	1.181	Supply of MS Day Tank for FO - 3 KL capacity (round tank with 5 mm plate) with level indicator, 2 nos of 6KW heaters along with temp. controller and cut off switch along with MS piping from Day Tank to Boilers	ITEMCODE 83	1	Set
84	1.182	Supply of 4 nos of HDPE Day Tanks for Soft Water of 3 KL capacity each, along with MS piping from Day Tank to Boilers	ITEMCODE 84	4	Set
85	1.183	Supply of Insulated Steam Header Piping 6" MS IBR seamless pipe thickness 8mm with airvent, pressure relief, safety valve, pressure gauge and draining of steam condensate through steam trap, 2 nos outlet for 2 nos PRS with provision of suitable length with flanges and pipe fittings along with NRV 4 nos in between Boiler output and steam header with necessary bend and fittings for catering steam output from 2 nos Boilers 850 kg/hr each and 5 nos more points for future expansion in same header (with a provision for up gradation to 6000 Kg/Hr)	ITEMCODE 85	1	LS
86	1.184	Supply of Steam Transfer Piping of 50 NB MS IBR seamless pipe with insulation and with necessary flanges and pipe fittings from Boiler outlet/steam header to PRS to Blend Tanks	ITEMCODE 86	180	Mtr.
87	1.185	Supply of Insulated Steam Transfer Piping of 80NB MS pipe with flanges and pipe fittings for recovery of condensate from Blend tanks to condensate recovery tank	ITEMCODE 87	80	Mtr.
88	1.186	Supply of Insulated Steam Transfer Piping of 25NB MS pipe with flanges and pipe fittings for steam supply / condensate collection	ITEMCODE 88	90	Mtr.
89	1.187	Supply of 50NB valves for Steam Piping	ITEMCODE 89	35	No.
90	1.188	Supply of 25NB valves for Steam Piping	ITEMCODE 90	30	No.
91	1.189	Supply of float type 25 NB Steam Traps	ITEMCODE 91	30	No.
92	1.19	Supply of water line - 2" Dia, GI, class B along with necessary valves and fittings as per site requirement	ITEMCODE 92	400	Mtr.
93	1.191	Supply of water line - 1" Dia, GI, class B along with necessary valves and fittings as per site requirement	ITEMCODE 93	200	Mtr.
94	1.192	Supply of Furnace Oil - 1.5 " Dia, MS along with necessary valves, and fitting with heat tracing and insulation	ITEMCODE 94	200	Mtr.
95	1.193	Supply of Furnace Oil - 1" Dia, MS along with necessary valves, and fitting with heat tracing and insulation	ITEMCODE 95	40	Mtr.
96	1.194	Supply of Monoblock Pump 2HP, Connection Size 2" for delivery up to height approx 40 feet - reputed make like Kirloskar/KSB or equivalent	ITEMCODE 96	2	No.
97	1.195	Supply of BOILER AREA MCC PANEL (3-Ph,50Hz,415V,Rated Current 250A, S.C Current 50KA, 1 Sec MCC with IP54 protection with Aluminium Bus Bar consisting of following feeders, MCC/PDB (I/C Feeders are consisting of Ammeter, Voltmeter with S/S, CT, R/Y/B & on/off Indication and O/G with on/off indication, All Motor Feeders consisting with MCCB/MPCB, Contactor, O/L Relay {as per Type 2 Coordination}, On/Off/Trip Indication, Local/Remote S/S, Start/Stop PB, 1No. MCB) (L&T, SIEMENS/equivalent) (The Panel will be Floor mounting, Free Standing, compartmentalizing type, constructed with 2/1.6mm thick CRCA Sheet, IP:54 with Powder coated panting shade: RAL 7035) (Make of MCCB/MPCB, Contactor, O/L Relay, MCB : L&T/SIEMENS/Equivalent, LED Indication Lamp/ PB/ SS : Siemens/ Teknic/ Kaycee/ Equivalent, MFM : Schneider/ Equivalent, Ameter/ Voltmeter : AE/ Rishabh / Equivalent) \n(i) Incoming Feeders - 250 A TP + N, MCCB with O/C, S/C Protection, Extended Rotary Handle, Aux. Contact - 1 no. (Make-L&T/SIEMENS/Equivalent).\n(ii) Outgoing feeders - (a) 32A TPN MCB for New Boiler FO Fired 850Kg/Hr Boiler - 4 nos. (b) 6KW Heater Feeder (32A TP MCB, Contactor and Temperature Controller for Heater for FO Pre-heating - 4 nos. (c) 2HP DOL Motor Starter Feeder for Mono-Block Pump - 4 nos. (d) Lighting Feeder (Consisting of - 6Nos. 16A DP MCB) - 1no. (Make-L&T/SIEMENS/Equivalent) \n(iii) Supply of separate 1 no. 250A MCCB for Main MCC Panel	ITEMCODE 97	1	No.
98	1.196	Supply of 3.5 core 120 sq mm XLPE insulated & PVC sheathed aluminium conductor armoured U.G. power cable of 1100 V grade conforming to IS 7098 (part I) along with cable gland double compression type and cable lug (aluminium) as per site requirement	ITEMCODE 98	140	Mtr.
99	1.197	Supply of 4 core 10 sq mm XLPE insulated & PVC sheathed aluminium conductor armoured U.G. power cable of 1100 V grade conforming to IS 7098 (part I) along with cable gland double compression type and cable lug (aluminium) as per site requirement	ITEMCODE 99	120	Mtr.
100	1.198	Supply of 3 core 2.5 sq mm PVC insulated & PVC sheathed copper conductor unarmoured submersible flat power cable of 1100 V grade conforming to IS 8130 along with cable end termination and cable lug (copper) as per site requirement	ITEMCODE 100	100	Mtr.
101	1.199	Design, Procurement, Manufacturing, Testing & Supply of 50 KL MS Tank 3500 mm dia x 5250 mm height with accessories	ITEMCODE 101	1	No.
102	1.2	Supply of Diesel operated Pump set complete in all respect i.e. comprising pump, motor of 1450 rpm, Pin Bush type coupling, coupling guard, common base frame, cushy foot mounting, and foundation. \na) Fire Pump of capacity 2280 LPM – (137 M3/Hr) (Make-Kirloskar/KSB/Greaves)	ITEMCODE 102	1	No.
103	1.201	Supply of Pump set complete in all respect i.e. comprising pump, motor of 1450 rpm, Pin Bush type coupling, coupling guard, common base frame, cushy foot mounting, and foundation. \nb) Jockey Pump of Capacity 180 LPM. (Make-Kirloskar/KSB/Greaves)	ITEMCODE 103	1	No.
104	1.202	Supply of Pressure Switch with guide valve and pressure damper including necessary fitting.	ITEMCODE 104	2	Set
105	1.203	Supply of Combined Starting Panel for above four nos. pump set, with Star-Delta type starter for Fire Pump & D.O.L. type starter for Jockey Pump.	ITEMCODE 105	1	No.
106	1.204	Supply of Pressure Gauge (100mm dia & 0 to 15 Kg / Sq.cm) with Guide Valve and pressure damper including necessary fittings.	ITEMCODE 106	3	Set
107	1.205	Supply of single headed oblique type Hydrant Valve (Alloy Steel) as per IS: 5290 with PVC blank cap.	ITEMCODE 107	15	No.
108	1.206	Supply of 63mm X 15 Mtr. long Hose as per IS: 8423, bounded with pair of Steel Coupling as per IS: 903.	ITEMCODE 108	30	No.
109	1.207	Supply of front glassed single door powder coated M.S.Hose Box (16 X 18 Swg) of standard design to accommodate one Branch Pipe with nozzle and 2 lengths of 63mm X 15 Mtr. long Hose.	ITEMCODE 109	15	No.
110	1.208	Supply of C.I. Flanged Gate Valve as per IS: 14846, PN 1.6 of 100mm NB	ITEMCODE 110	2	No.
111	1.209	Supply of C.I. Flanged Non Return Valve as per IS: 5312, PN 1.6 of 100mm NB	ITEMCODE 111	1	No.
112	1.21	Supply of aboveground/underground M.S. piping conforming to IS: 1239 / 3589 with fitting, support, clamp and treatment on outer surface by one coat of primer & two coats of synthetic enamel red paint for 100mm NB,M.S., Medium(Schedule 40)	ITEMCODE 112	350	Mtr.
113	1.211	Supply of Aluminium Armoured Cable for supply to panel (Size – 3C X 95 Sq. mm.)	ITEMCODE 113	200	Mtr.
114	1.212	Supply of Aluminium Armoured Cable for supply panel to motor (Size – 3C X 50 Sq. mm.)	ITEMCODE 114	50	Mtr.
115	1.213	Supply of Mono block pump set to fill the Water Tank (Pump rating – 1 HP, 2900 rpm, single phase, 220 V)	ITEMCODE 115	1	No
116	1.214	Supply of GI pipe for water tank inlet pipeline 1”	ITEMCODE 116	250	Mtr.
117	1.215	Supply of earthing material i.e. GI pipe, charcoal, Aluminium Strip, Salt etc.	ITEMCODE 117	1	Set
118	1.216	Supply of 300 Ltr. SS Kettle with agitator with 2 Way Ball Valve 40 NB- 2Nos, 2 Way Ball Valve 25 NB- 2Nos	ITEMCODE 118	1	No.
119	1.217	Supply of Screw Pump, RDAA 492 of make Roto Pumps Ltd or suitable Centrifugal Pump for transferring kettel to tank and 2.0 HP TEFC, IP 55 motor with suitable Gear Box and Coupling and base plate.	ITEMCODE 119	1	Set
120	1.218	Supply of 25 NB pipe, MOC SS 304 necessary nozzel, bend , valve etc	ITEMCODE 120	75	Mtr.
121	1.219	Supply of HDPE Day Tanks of 3 KL capacity	ITEMCODE 121	1	Set
122	1.22	3-Ph,50Hz,415V, Rated Current 800A, S.C. Current 16/25/50KA, 1 Sec MCC (MAIN MCC IN MCC ROOM ( Panel 1) with IP54 protection with Aluminium Bus Bar consisting of following feeders, MCC/PDB (I/C feeders are consisting of Digital Ammeter, Digital Voltmeter , C/T, MFM, R/Y/B & on/off indication and O/G with on/off/trip Indication ) (L&T/SIEMENS/Equivalnt) (Floor mounting, Free Standing, compartmentalizing type, constructed with 2/1.6mm thick CRCA Sheet, with powder coated panting shade : RAL 7035) a) Incoming Feeders - 800A, 4P 50KA MDO ACB with microprossor based released - 2 no.( I/C from 315KVA Transformer & I/C from D.G set). b) Bus coupler Feeders - 800A, 4P, 50KA MDO ACB with microprossor based released - 1no., c) Outgoing feeders - 630A TP, MCCB with O/C, S/C Protection (microprossor), Extended Rotary Handle, AUX. & trip alarm Contact- 2 Nos, & 400A TP, MCCB with O/C, S/C Protection (microprossor), Extended Rotary Handle, AUX. & trip alarm Contact- 3 Nos, & 160A TP, MCCB with O/C, S/C Protection (microprossor), Extended Rotary Handle, AUX. & trip alarm Contact- 3 Nos & 100A TP, MCCB with O/C, S/C Protection (microprossor), Extended Rotary Handle, AUX. & trip alarm Contact- 1 No. & 63A TP, MCCB with O/C, S/C Protection (microprossor), Extended Rotary Handle, AUX. & trip alarm Contact- 2 Nos. & 32A TP, MCCB with O/C, S/C Protection (thermal magnetic), Extended Rotary Handle, AUX. & trip alarm Contact- 1 No.	ITEMCODE 122	1	Set
123	1.221	3-Ph,50Hz,440V, 260 KVAR CAPACITOR PANEL (Panel 8) IN MCC ROOM with IP54 protection with Aluminium Bus Bar consisting of following feeders, (L&T/SIEMENS/Equivalnt) (Floor mounting, Free Standing compartmentalizing type, constructed with 2/1.6mm thick CRCA Sheet, with powder coated panting shade : RAL 7035) a)Incoming Feeders - 630A, TP 50KA MCCB with Extended Rotary Handle - 1 no. b) Outgoing feeders - 50KVAR - 4 Nos, 25KVAR- 1 No., 15KVAR - 1 No., 10KVAR - 1 No., 5KVAR - 1 No. (The Capacitor Panel will be with 7 Stage Automatic Power Factor Correction Relay and auto/manual provision and each bank feeder consist with Suitable rated fuse, Capacitor Duty Contactor, Push Button, LED Indication Lamp, Timer etc.	ITEMCODE 123	1	Set
124	1.222	BOILER AREA MCC (Panel 2) (3-Ph, 50Hz,415V, Rated Current 160A, S.C. Current 16/25/50KA, 1 Sec MCC with IP54 Protection with Aluminium Bus Bar consisting of following feeders, MCC/PDB (I/C feeders are consisting of Digital Ammeter, Digital Voltmeter, CT, R/Y/B & on/off/trip Indication and O/G with on/off/trip indication, All Motor Feeders consisting with MCCB/MPCB, Contactor, O/L Relay, On/Off/Trip Indication, Local/Remote S/S, Start/Stop PB, 1No. MCB) (L&T, SIEMENS/ Equivalent) (Floor mounting, Free Standing, Compartmentalizing type, constructed with 2/1.6mm thick CRCA sheet, with Power coated panting shade: RAL 7035) a) Incoming Feeders - 160A 50 KA 4 pole, MCCB with O/C, S/C Protection ( thermal magnetic), Extended Rotary Handle, Aux. Contact- 1 no, b) Outgoing feeders - 16A 50 KA 4 pole, MCCB with O/C, S/C Protection ( thermal magnetic), Extended Rotary Handle, Aux. Contact- 6 nos & 32A 50 KA 3 pole, MCCB with O/C, S/C Protection ( thermal magnetic), Extended Rotary Handle, Aux. Contact- 6 nos for Lighting Feeder.	ITEMCODE 124	1	Set
125	1.223	PROCESS AREA - I MCC ( Panel 3) (3-Ph, 50Hz,415V, Rated Current 400A S.C. Current 16/25/50KA, 1 Sec MCC With IP54 protection with Aluminium Bus Bar consisting of following feeders, MCC/PDB (I/C Feeders are consisting of Digital Ammeter, Digital Voltmeter , CT, R/Y/B & on/off/trip Indication and O/G with on/off/trip indication, All Motor Feeders consisting with MCCB/MPCB, Contactor, O/L Relay, On/Off/Trip Indication, Local/Remote S/S, Start/Stop PB, 1No MCB) (L&T, SIEMENS/Equivalent) (Floor mounting, Free Standing, Compartmentalizing type, constructed with 2/1.6mm thick CRCA sheet, with Power coated panring shade: RAL 7035) a) Incoming Feeders - 400A, 4P, MCCB with O/C, S/C Protection (microprocessor), Extended Rotary Handle, Aux. Contact - 1No. b) Outgoing feeders- 15 KW Star/Dalta Motor Starter Feeder - 6 nos. & 7.5 KW Star/Delta Motor Starter Feeder - 9 nos., 125 A 3 Pole 50 KA MCCB with thermal magnetic realease- 2 nos. & 32 A 3 Pole 50 KA MCCB with thermal magnetic realease- 2 nos for Lighting Feeder.	ITEMCODE 125	1	Set
126	1.224	PROCESS AREA - 2 MCC ( Panel 4) (3-Ph, 50Hz,415V, Rated Current 400A S.C. Current 16/25/50KA, 1 Sec MCC With IP54 protection with Aluminium Bus Bar consisting of following feeders, MCC/PDB (I/C Feeders are consisting of Digital Ammeter, Digital Voltmeter , CT, R/Y/B & on/off/trip Indication and O/G with on/off/trip indication, All Motor Feeders consisting with MCCB/MPCB, Contactor, O/L Relay, On/Off/Trip Indication, Local/Remote S/S, Start/Stop PB, 1No MCB) (L&T, SIEMENS/Equivalent) (Floor mounting, Free Standing, Compartmentalizing type, constructed with 2/1.6mm thick CRCA sheet, with Power coated panring shade: RAL 7035) a) Incoming Feeders - 400A, 4P, MCCB with O/C, S/C Protection (microprocessor), Extended Rotary Handle, Aux. Contact - 1No. b) Outgoing feeders- 7.5 KW Star/Dalta Motor Starter Feeder - 9 nos., 5.5 KW DOL Motor Starter Feeder - 3 nos., 3.7 KW DOL Motor Starter Feeder - 7 nos., 2.2 KW DOL Motor Starter Feeder - 4 nos., 1.5 KW DOL Motor Starter Feeder - 9 nos., 100 A 3 Pole 50 KA MCCB with thermal magnetic realease- 3 nos. & 32 A 3 Pole 50 KA MCCB with thermal magnetic realease- 5 nos for Lighting Feeder.	ITEMCODE 126	1	Set
127	1.225	Fire pump and repair shop Panel MCC ( Panel 5) (3-Ph, 50Hz, 415V, Rated Current 400A S.C. Current 16/25/50KA, 1 Sec MCC With IP54 protection with Aluminium Bus Bar consisting of following feeders, MCC/PDB (I/C Feeders are consisting of Digital Ammeter, Digital Voltmeter , CT, R/Y/B & on/off/trip Indication and O/G with on/off/trip indication, All Motor Feeders consisting with MCCB/MPCB, Contactor, O/L Relay, On/Off/Trip Indication, Local/Remote S/S, Start/Stop PB, 1No MCB) (L&T, SIEMENS/Equivalent) (Wall / Floor mounting, Free Standing, Compartmentalizing type, constructed with 2/1.6mm thick CRCA sheet, with Power coated panring shade: RAL 7035) a) Incoming Feeders - 160A, 4P, MCCB with O/C, S/C Protection (thermal magnetic), Extended Rotary Handle, Aux. Contact - 1No. b) Outgoing feeders- 37 KW Star/Dalta Motor Starter Feeder - 2 nos., 5.5 KW DOL Motor Starter Feeder - 3 nos., 125 A 3 Pole 50 KA MCCB with thermal magnetic realease- 2 nos. & 6 A SPMCB- 2 nos for Lighting Feeder.	ITEMCODE 127	1	Set
128	1.226	Office Area Utility Panel ( Panel 6) (3-Ph, 50Hz, 415V, Rated Current 400A S.C. Current 16/25/50KA, 1 Sec MCC With IP54 protection with Aluminium Bus Bar consisting of following feeders, MCC/PDB (I/C Feeders are consisting of Digital Ammeter, Digital Voltmeter , CT, R/Y/B & on/off/trip Indication and O/G with on/off/trip indication, All Motor Feeders consisting with MCCB/MPCB, Contactor, O/L Relay, On/Off/Trip Indication, Local/Remote S/S, Start/Stop PB, 1No MCB) (L&T, SIEMENS/Equivalent) (Wall / Floor mounting, Free Standing, Compartmentalizing type, constructed with 2/1.6mm thick CRCA sheet, with Power coated panring shade: RAL 7035) a) Incoming Feeders - 100A, 50 KA, 4P, MCCB with O/C, S/C Protection (thermal magnetic), Extended Rotary Handle, Aux. Contact - 1No. b) Outgoing feeders- 63 A 3 Pole 50 KA MCCB with thermal magnetic realease- 2 nos. & 32 A 3 Pole 50 KA MCCB with thermal magnetic realease- 2 nos. for Lighting Feeder.	ITEMCODE 128	1	Set
129	1.227	Repair Shop Panel ( Panel 7) (3-Ph, 50Hz, 415V, Rated Current 63A S.C. Current 16/25/50KA, 1 Sec MCC With IP54 protection with Aluminium Bus Bar consisting of following feeders, MCC/PDB (I/C Feeders are consisting of Digital Ammeter, Digital Voltmeter , CT, R/Y/B & on/off/trip Indication and O/G with on/off/trip indication, All Motor Feeders consisting with MCCB/MPCB, Contactor, O/L Relay, On/Off/Trip Indication, Local/Remote S/S, Start/Stop PB, 1No MCB) (L&T, SIEMENS/Equivalent) (Floor/ wall mounting, Free Standing, Compartmentalizing type, constructed with 2/1.6mm thick CRCA sheet, with Power coated panring shade: RAL 7035) a) Incoming Feeders - 63A, 50 KA, 4P, MCCB with O/C, S/C Protection (thermal magnetic), Extended Rotary Handle, Aux. Contact - 1No. b) Outgoing Feeders - 32 A 3 Pole 50 KA MCCB with thermal magnetic realease- 5 nos., 2.2 KW DOL Motor Starter Feeder - 2 nos. & 1.5 KW DOL Motor Starter Feeder - 2 nos.	ITEMCODE 129	1	Set
130	1.228	Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note: Vertical type MCB TPDB is normally used where 3 phase outlets are required.) a) 8 way (4 + 24), Double door	ITEMCODE 130	1	No.
131	1.229	Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) a) 4 way (4 + 12), Double door	ITEMCODE 131	12	Nos.
132	1.23	Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) b) 6 way (4 + 18), Double door	ITEMCODE 132	1	No.
133	1.231	Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) 63 A 4 pole 10 kA MCB	ITEMCODE 133	1	No.
134	1.232	Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. b) 32 A 4 pole 10 kA MCB	ITEMCODE 134	13	Nos.
135	1.233	Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. c) 16 A 3 pole 10 kA MCB	ITEMCODE 135	2	Nos.
136	1.234	Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. d) 16 A single pole 10 kA MCB	ITEMCODE 136	60	Nos.
137	1.235	Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. e) 10 A single pole 10 kA MCB	ITEMCODE 137	3	Nos.
138	1.236	Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. f) 6 A single pole 10 kA MCB	ITEMCODE 138	64	Nos.
139	1.237	Supply of D.P. structure using 2 nos. 11 Mtr. Long (200 mm x 100 mm x 5.7 mm thick) M.S. joist/beam as vertical members including their cross arms made up from M.S. channel (75 mm x 40 mm x 4.8 mm thick) and supplying the following accessories as required. a) Supplying of three piece nonlinear resistor type lightning arrestor suitable for 3 wire, 11 KV overhead lines with rated voltage 9 KV (rms) with a nominal discharge current rating of 5 KA and complete with galvanised clamping arrangement, G.I. bolts, nuts, washers etc. as required. b) 11 KV, 400 Amp. A.B. Switch (3 posts, Vertical type) - 1 Set c) 400 Amps rated horn gap fuse (3 nos) - 1 Set d) Pin insulator e) ACSR wire	ITEMCODE 139	1	Job
140	1.238	Supplying of 3 x 120 sq mm XLPE insulated & PVC sheathed Aluminium conductor armoured U.G. power cable of 11 KV grade (E) conforming to IS 7098 (Part-II) as required.	ITEMCODE 140	48	Mtr.
141	1.239	Supplying of cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of XLPE aluminium conductor cable of 11 KV grade as required. a) Outdoor type for 3 x 120 sq mm	ITEMCODE 141	3	Nos.
142	1.24	Supplying of cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of XLPE aluminium conductor cable of 11 KV grade as required. b) Indoor type for 3 x 120 sq mm	ITEMCODE 142	1	No.
143	1.241	Supplying of 3.5 core 185 sq mm XLPE insulated & PVC sheathed Aluminium conductor armoured U.G. power cable of 1100 V grade conforming to IS 7098 (Part-I) along with cable gland double compression type and cable lug (aluminium) as per site requirement.	ITEMCODE 143	836	Mtr.
144	1.242	Supplying of 3.5 core 150 sq mm XLPE insulated & PVC sheathed Aluminium conductor armoured U.G. power cable of 1100 V grade conforming to IS 7098 (Part-I) along with cable gland double compression type and cable lug (aluminium) as per site requirement.	ITEMCODE 144	172	Mtr.
145	1.243	Supplying of 3.5 core 120 sq mm XLPE insulated & PVC sheathed Aluminium conductor armoured U.G. power cable of 1100 V grade conforming to IS 7098 (Part-I) along with cable gland double compression type and cable lug (aluminium) as per site requirement.	ITEMCODE 145	132	Mtr.
146	1.244	Supplying of 3.5 core 70 sq mm XLPE insulated & PVC sheathed Aluminium conductor armoured U.G. power cable of 1100 V grade conforming to IS 7098 (Part-I) along with cable gland double compression type and cable lug (aluminium) as per site requirement.	ITEMCODE 146	151	Mtr.
147	1.245	Supplying of 3.5 core 50 sq mm XLPE insulated & PVC sheathed Aluminium conductor armoured U.G. power cable of 1100 V grade conforming to IS 7098 (Part-I) along with cable gland double compression type and cable lug (aluminium) as per site requirement.	ITEMCODE 147	165	Mtr.
148	1.246	Supplying of 3.5 core 35 sq mm XLPE insulated & PVC sheathed Aluminium conductor armoured U.G. power cable of 1100 V grade conforming to IS 7098 (Part-I) along with cable gland double compression type and cable lug (aluminium) as per site requirement.	ITEMCODE 148	44	Mtr.
149	1.247	Supplying of 3.5 core 25 sq mm XLPE insulated & PVC sheathed Aluminium conductor armoured U.G. power cable of 1100 V grade conforming to IS 7098 (Part-I) along with cable gland double compression type and cable lug (aluminium) as per site requirement.	ITEMCODE 149	22	Mtr.
150	1.248	Supplying of 3 core 35 sq mm XLPE insulated & PVC sheathed Aluminium conductor armoured U.G. power cable of 1100 V grade conforming to IS 7098 (Part-I) along with cable gland double compression type and cable lug (aluminium) as per site requirement.	ITEMCODE 150	66	Mtr.
151	1.249	Supplying of 3 core 16 sq mm XLPE insulated & PVC sheathed Aluminium conductor armoured U.G. power cable of 1100 V grade conforming to IS 7098 (Part-I) along with cable gland double compression type and cable lug (aluminium) as per site requirement.	ITEMCODE 151	352	Mtr.
152	1.25	Supplying of 3 core 4 sq mm XLPE insulated & PVC sheathed Aluminium conductor armoured U.G. power cable of 1100 V grade conforming to IS 7098 (Part-I) along with cable gland double compression type and cable lug (aluminium) as per site requirement.	ITEMCODE 152	1056	Mtr.
153	1.251	Supplying of 4 core 10 sq mm XLPE insulated & PVC sheathed Aluminium conductor armoured U.G. power cable of 1100 V grade conforming to IS 7098 (Part-I) along with cable gland double compression type and cable lug (aluminium) as per site requirement.	ITEMCODE 153	231	Mtr.
154	1.252	Supplying of 4 core 6 sq mm XLPE insulated & PVC sheathed Aluminium conductor armoured U.G. power cable of 1100 V grade conforming to IS 7098 (Part-I) along with cable gland double compression type and cable lug (aluminium) as per site requirement.	ITEMCODE 154	396	Mtr.
155	1.253	Supplying of 3 core 2.5 sq mm PVC insulated & PVC sheathed Aluminium / Copper conductor unarmoured submerssiable flat power cable of 1100 V grade conforming to IS 8130 along with cable end termination and cable lug (Copper) as per site requirement.	ITEMCODE 155	550	Mtr.
156	1.254	Supplying of 3 core 1.5 sq mm XLPE insulated & PVC sheathed Aluminium / Copper conductor armoured U.G. power cable of 1100 V grade conforming to IS 7098 (Part-I) along with cable gland double compression type and cable lug (Copper) as per site requirement.	ITEMCODE 156	308	Mtr.
157	1.255	Supplying of 4 core 1.5 sq mm XLPE insulated & PVC sheathed Aluminium / Copper conductor armoured U.G. power cable of 1100 V grade conforming to IS 7098 (Part-I) along with cable gland double compression type and cable lug (Copper) as per site requirement.	ITEMCODE 157	1067	Mtr.
158	1.256	Local Push Button Control Station (Wall/ Structure mounting, non-copartmentalizing type, constructed with 2/1.6mm thick CRCA Sheet, with Powder coated panting shade : RAL 7035) - Start PB with 2NO Contact - 1 no. & Stop PB with 1NO+1NC Contact - 1 no. & 2.5Sq. Mm. Control Terminal - 6 nos.	ITEMCODE 158	40	Nos.
159	1.257	Supply of 6" dia GI pipe ( medium ISI mark) for cable protection	ITEMCODE 159	72	Mtr.
160	1.258	Earthing Material - 40x6 mm G.I Earth Flat	ITEMCODE 160	400	Mtr.
161	1.259	Earthing Material - 8 SWG G.I wire	ITEMCODE 161	700	Mtr.
162	1.26	Earthing Material - 3" Dia 3Mtr. GI Pipe with Wire Mesh & Clamp	ITEMCODE 162	40	Nos.
163	1.261	Earthing Material - 600 mm x 600 mm x 5 mm thick Copper Plate as per IS 3043 : 1987.	ITEMCODE 163	40	Nos.
164	1.262	Lightning Protection - 45degree G.I Air Terminal with 25 mm GI pipe as per requirement.	ITEMCODE 164	25	Nos.
165	1.263	Lightning Protection - 25x3 mm G.I Down Conductor	ITEMCODE 165	500	Mtr.
166	1.264	Materials for wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.	ITEMCODE 166	80	Nos.
167	1.265	Materials for wiring for twin control light point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed steel conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.	ITEMCODE 167	4	Nos.
168	1.266	Materials for wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire	ITEMCODE 168	200	Mtr.
169	1.267	Materials for wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required b) 4 X 1.5 sq. mm + 2 X 1.5 sq. mm earth wire	ITEMCODE 169	100	Mtr.
170	1.268	Materials for wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required c) 6 X 1.5 sq. mm + 3 X 1.5 sq. mm earth wire	ITEMCODE 170	60	Mtr.
171	1.269	Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.	ITEMCODE 171	10	Nos.
172	1.27	Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings).	ITEMCODE 172	20	Nos.
173	1.271	2X20/22W LED Batten with suitable LED Tube Light (M/S Havells model Regal Batten or CG/Philips/Bajaj/Wipro make SS model)	ITEMCODE 173	50	Nos.
174	1.272	Supplying 1400 mm sweep ceilling fan w/o regulator and with all other accessories suitable for operation on 220 V 50 HZ single phase ac supply. (M/s Havells make model No. pacer/Velocity or s.s model of Bajaj/Crompton/Usha).	ITEMCODE 174	8	Nos.
175	1.273	Supplying of 400mm sweep wall mounted exhaust fan with all other accessories suitable for operation on 220 V 50 HZ single phase ac supply (M/s M/s Havells/Comptron/Bajaj/Usha make )	ITEMCODE 175	8	Nos.
176	1.274	Materials for wiring for AC / power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.	ITEMCODE 176	350	Mtr.
177	1.275	Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.	ITEMCODE 177	12	Nos.
178	1.276	Materials for wiring for 3 phase power plug with 4X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 2 Nos 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.	ITEMCODE 178	200	Mtr.
179	1.277	Supplying of 32 amps, 415 volts, TPN industrial type, socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 32 amps "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.	ITEMCODE 179	5	Nos.
180	1.278	Supplying following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. a) 150 mm width X 50 mm depth X 1.6 mm thickness	ITEMCODE 180	120	Mtr.
181	1.279	Supplying following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. b) 300 mm width X 50 mm depth X 1.6 mm thickness	ITEMCODE 181	50	Mtr.
182	1.28	Supplying of 165W LED Flood Complete Light Set of IP65 and operating voltage 140 - 270 V AC (Make : Philips ( Cat No. BVP410 LED 165 CW HE SY20 FG S3 XTFC)/Cropmton/Bajaj/Equivalent)	ITEMCODE 182	14	Nos.
183	1.281	Supply of 9 litres capacity fire buckets with inscription of? FIRE? signal red colour i/c filling of sand ,P/F hooks,clamps etc required.( 1 set = 3 Nos.)	ITEMCODE 183	2	Set
184	1.282	S/F 4.5 Kg CO2 type Fire extinguisher with suitable hose pipe and hook etc as required. ( ISI marked)	ITEMCODE 184	15	Nos.
185	1.283	S/L of 6 mm thick rubber mat suitable for MV/HV supply (class- B category)as required. ( ISI marked)	ITEMCODE 185	6	Sq. Mtr.
186	1.284	Supply of 250 KVA Diesel Generating Set with required accessories as per the detailed specification in Annexure-A & Annexure-B along with necessary multistrand armoured cable (approx 40 mtrs.) suitable for connecting incoming supply from DG Set with AMF and MCC panel along with exhaust gas piping with necessary fittings and accessories as required	ITEMCODE 186	1	No.
187	1.285	Supply of AMF Panel (Automatic Main Failure) for auto start/stop with required accessories suiting to the above DG Set mentioned in Annexure-A & Annexure-B	ITEMCODE 187	1	No.
188	1.286	Earthing Material - 18" X 18" X 5 mm thick Copper Plate of electrolytic Grade as per IS 3043	ITEMCODE 188	4	No.
189	1.287	Earthing Material - 3" Dia 4 mtr GI pipe with fuunnel & wire mesh & clamp for earth pit as per IS 3043	ITEMCODE 189	4	No.
190	1.288	Earthing Material - 50x6 mm G.I Earth Flat.	ITEMCODE 190	60	Mtr.
191	1.289	Cable protection pipe - 3" Dia 3 Mtr. GI pipe for protection of cables (Tata/ Equivalent).	ITEMCODE 191	12	Mtr.
192	1.29	Supply of High Mast Tower (25 mtr. height) suitable for 12 set of 200 W LED flood light fittings (Design standard I.L.E. technical support no. 7:2000, material equivalent to BSEN10025, hot deep galvanization to IS: 4759) (Make: Utkarsh / Bajaj) with power feeder box (outdoor type) including motor timer & all electrical and electronics materials, interconnection suitable for power feeder and operation of 25 mtr. High Mast Tower and 12 set of 200 W LED light (Make: Crompton / Greaves)	ITEMCODE 192	2	No.
193	1.291	Cable 1100V grade multistrand armoured cable as per IS: 7098 (Part 1) / 1988 along with cable gland double compression type and cable lug (Aluminium) as per site requirement – 3C X 6 sqmm Al.XLPE cable (Make: Havells)	ITEMCODE 193	200	Mtr.
194	1.292	Cable 1100V grade multistrand armoured cable as per IS: 7098 (Part 1) / 1988 along with cable gland double compression type and cable lug (Aluminium) as per site requirement – 4C X 10 sqmm Al.XLPE cable (Make: Havells)	ITEMCODE 194	50	Mtr.
195	1.293	Earthing material – 8 SWG GI wire	ITEMCODE 195	300	Mtr.
196	1.294	4MP IP Camera - 1/3# CMOS , H265 & H264	ITEMCODE 196	23	EA
197	1.295	4K IP Fixed Bullet Camera - 1.8" 8MP	ITEMCODE 197	4	EA
198	1.296	4K IP Motorized Bullet Camera	ITEMCODE 198	4	EA
199	1.297	2MP 30x Starlight IR PTZ Network Camera	ITEMCODE 199	1	EA
200	1.298	64 Ch NVR - Intel Processor	ITEMCODE 200	1	EA
201	1.299	64 Ch NVR FOR DISPLAY IN GOURD ROOM	ITEMCODE 201	1	EA
202	1.3	Surveillance Hard Disk 8TB	ITEMCODE 202	13	EA
203	1.301	LED TV FHD 49	ITEMCODE 203	1	EA
204	1.302	LED TV FHD 42	ITEMCODE 204	1	EA
205	1.303	4 Port Giga POE with 2 Uplink GigaLan	ITEMCODE 205	9	EA
206	1.304	8 Port Giga POE with 2 Uplink SFP port	ITEMCODE 206	3	EA
207	1.305	Armourd CAT 6 Cable	ITEMCODE 207	1000	Mtr.
208	1.306	1KVA Online UPS With 9Ah Battery	ITEMCODE 208	1	EA
209	1.307	IP 67 Enclosure Outdoor Box	ITEMCODE 209	9	EA
210	1.308	Server Rack With Accessorise	ITEMCODE 210	1	EA
211	1.309	Armoured 3 core cable 1.5 SQmm	ITEMCODE 211	900	Mtr.
212	1.31	HDPE Pipe 32mm	ITEMCODE 212	900	Mtr.
213	1.311	Fabricated GI Pole - CCTV	ITEMCODE 213	7	EA
214	1.312	Chemical Earthing Pit 50mm 2Mt.	ITEMCODE 214	2	EA
215	1.313	Ethernet LAN Surge Protector RJ-45	ITEMCODE 215	64	EA
216	1.314	Supply of Air Compressor 3HP	ITEMCODE 216	1	No.
217	1.315	Supply of Car Washer	ITEMCODE 217	1	No.
218	1.316	Supply of PVC Overhead Tank	ITEMCODE 218	1	No.
219	1.317	Supply of Water Pump and related plumbing for supply of water to overhead tank from Underground Tank	ITEMCODE 219	1	No.
220	1.318	Providing services of Borewell Drilling and Supply of Pump for Borewell.	ITEMCODE 220	1	No.
221	1.319	pH Meter: (Like Toshniwal / Sisco or other reputed make)	ITEMCODE 221	1	No.
222	1.32	Water Bath: (reputed make)	ITEMCODE 222	1	No.
223	1.321	Hotplate: (reputed make)	ITEMCODE 223	1	No.
224	1.322	Flash Point Apparatus: (Abel)	ITEMCODE 224	1	No.
225	1.323	Lab Stirrer: (reputed make)	ITEMCODE 225	1	No.
226	1.324	Constant RPM Stirrer with following attachments (reputed make)	ITEMCODE 226	1	No.
227	1.325	The Procurement, Manufacturing, Testing & Supply of Pit Less Type Electronic Weighbridge 60T Capacity, as per technical specification given in Brief Scope of Work	ITEMCODE 227	1	No.
228	1.326	Supply and Commissioning of Diesel Forklift Truck 3000 Kg Capacity as per detail\nspecification given in Brief Scope of Work	ITEMCODE 228	2	No.
229	2	PART - B \n(INSTALLATION & COMMISSIONING)	ITEMCODE 229
230	2.1	Installation & Commissioning of SS Hold Tank for Storage of AN/CN Melt of 103 KL capacity, MOC: SS-304 L (Bottom 8 mm, Shell 6 mm and Top 5 mm thick), size - 4500 mm dia X 6750 mm height, tank will be vertical, cylindrical flat bottom & conical self-supported roof with proper sand leveling, grouting along with Electrical Work and Piping Work with necessary fittings, accessories. The specifications and requirement of the Hold Tank and accessories will be as per the details mentioned in "Brief Scope of Work".	ITEMCODE 230	1	No.
231	2.101	I&C of Electrical work – Laying of cable and electrical fixtures	ITEMCODE 231	200	Mtr.
232	2.102	I&C of SS piping of 2" dia long with necessary bends and fittings for Process Piping with heat tracing and insulation	ITEMCODE 232	100	Mtr.
233	2.103	I&C of Quick Release Coupling set (male and female) for 50 mm ID suitable for SS piping & Flexible Chemical Hose	ITEMCODE 233	3	Each
234	2.104	I&C of SS304 Flanges 50 NB size for Process Piping	ITEMCODE 234	30	No.
235	2.105	I&C of SS304 Valves 50 NB Size for Process Piping	ITEMCODE 235	3	No.
236	2.106	I&C of Steam Transfer Piping of 50 NB MS IBR seamless pipe with insulation and with necessary flanges and pipe fittings from one point to Hold Tanks	ITEMCODE 236	100	Mtr.
237	2.107	I&C of 50NB valves for Steam Piping	ITEMCODE 237	4	No.
238	2.108	I&C CON. Reducer 50 x 40 NB, SS-304L, #150	ITEMCODE 238	4	No.
239	2.109	I&C of float type 25 NB Steam Traps	ITEMCODE 239	4	No.
240	2.11	Installation of 80 KL Storage Tank for Oxidizer Phase (OP) of 4500 mm Dia X 5000 mm Straight Height. Material of Construction - SS304, Plate thickness - Shell 6 mm, top cover 5 mm and bottom plate 8 mm. Vertical, cylindrical, flat bottom, conical flanged top with supports welded with 75X75 X8 mm Angle Ring, The tank will be complete with 125 Mtrs, 40 NB SCH 40spiral SS304 coil, in two parts for necessary steam heating. It will also be completed with all necessary nozzle, drain, vent, support lugs, heat exchangers, insulated, liquid level transmitter having LCD display and suitable MS Ladder with railing at the top and Sampling Point having an arrangement of two valves for drawl of one liter of sample.	ITEMCODE 240	2	No.
241	2.111	I&C of Electrical work – Laying of cable and electrical fixtures	ITEMCODE 241	200	Mtr.
242	2.112	I&C of SS piping of 2" dia long with necessary bends and fittings for Process Piping with heat tracing and insulation	ITEMCODE 242	150	Mtr.
243	2.113	I&C of Quick Release Coupling set (male and female) for 50 mm ID suitable for SS piping & Flexible Chemical Hose	ITEMCODE 243	3	Each
244	2.114	I&C of SS304 Flanges 50 NB size for Process Piping	ITEMCODE 244	50	No.
245	2.115	I&C of SS304 Valves 50 NB Size for Process Piping	ITEMCODE 245	6	No.
246	2.116	I&C of Steam Transfer Piping of 50 NB MS IBR seamless pipe with insulation and with necessary flanges and pipe fittings from one point to Hold Tanks	ITEMCODE 246	150	Mtr.
247	2.117	I&C of 50NB valves for Steam Piping	ITEMCODE 247	4	No.
248	2.118	I&C CON. Reducer 50 x 40 NB, SS-304L, #150	ITEMCODE 248	4	No.
249	2.119	I&C of float type 25 NB Steam Traps	ITEMCODE 249	8	No.
250	2.12	Installation & Commissioning of 24 KL Storage & Blending Tank for Oxidizer Phase (OP) of ID of Tank: 3580mm, Tank wall thickness 6mm plus 50mm space for insulation material all around the tank, thus total OD of tank shall be approx. 3692mm X Height of Tank wall: 2600mm, plus channel support of 200mm at the tank base & top, thus total height of tank from floor level shall be 3000mm Straight Height. Tank Material of Construction - SS304, Plate thickness - Shell 6 mm, Flanged Flat Top 4 mm, Flat Bottom 8 mm with MS Channel Support, the blend tank will be vertical, cylindrical, flat bottom, flat flanged top, complete with 90 m, 40 NB SCH 40 spiral SS304 coil in two parts, 90 mm Dia shaft along with 02 numbers of pitch blade top entry turbine agitator at different depth, 65-70 RPM with supports, all necessary nozzle, drain, vent, support lugs and MS platform with railing and suitable ladder and 20 HP, IP 55, TEFC motor with suitable Electrical Power Switch, Gear Box along with insulation of tank by 50 mm thick glass wool pad, chicken mesh and cladding with Aluminium Sheet of 22 SWG. Height of manhole collar to be max 200 mm so that it is within the height of channel support at the top of tank and it does not interfere during placement of tank. Manhole size required minimum 600 mm ID at the top of tank for feeding of AN & cleaning of Tank. Providing feed hopper to be fitted on manhole having square shape (approx. 1m x1m) at top and with bottom dia equivalent to manhole dia with fixing arrangement with nut & bolts of SS is required for all tanks.	ITEMCODE 250	3	No
251	2.121	Installation & Commissioning of SS304 Flanges 50NB for above Process Piping	ITEMCODE 251	12	No
252	2.122	Installation & Commissioning of SS304 Valves 50 NB Size for above Process Piping	ITEMCODE 252	6	No
253	2.123	Installation & Commissioning of Electrical work – Laying of cable - approx. 3Ø power supply to electrical fixtures attached to Blend Tanks, Pumps and Boilers	ITEMCODE 253	60	M
254	2.124	Installation & Commissioning of flexible Chemical Hose for Oxidizer Phase unloading and transfer line - 50 mm ID, IS:7654 Type1 with quick release end fittings of BJ or any other suitable better make	ITEMCODE 254	60	M
255	2.125	Installation & Commissioning of Quick Release Coupling set (male and female) for 50 mm ID flexible chemical hose - of BJ Corporation Make or equivalent	ITEMCODE 255	6	SET
256	2.126	Installation & Commissioning of Insulated Steam Transfer Piping of 40NB MS pipe with flanges and pipe fittings form supply line to the proposed Blend tanks	ITEMCODE 256	100	M
257	2.127	Installation & Commissioning of Insulated Steam Transfer Piping of 25NB MS IBR seamless pipe with flanges and pipe fittings for recovery of condensates	ITEMCODE 257	120	M
258	2.128	Installation & Commissioning of 40NB valves for Steam Piping	ITEMCODE 258	9	No
259	2.129	Installation & Commissioning of 25NB valves for Steam Piping	ITEMCODE 259	6	No
260	2.13	Installation & Commissioning of float type 25 NB Steam Traps	ITEMCODE 260	6	No
261	2.131	Installation & Commissioning of Storage Tank (MOC-MS) of 40 KL capacity with additional provision for 5% air space , MOC-IS 2062, Size-3600 mm dia X 4000 St. Ht. . The tank will be vertical, cylindrical, flat bottom and conical top to be fabricated from IS 2062 quality plates. Shell & Top will be from 6 mm thk plates and bottom will be 8 mm thick. Complete with Steam Heating Coil of approx. 80 mtrs. of 25 NB SCH 10 MS Pipe Coil. The tank will be completed with necessary drain, vent etc. The Tank will be insulated by 50 mm thick glass wool pad, chicken mesh and cladding with Aluminium Sheet of 22 SWG along with suitable Ladder & Railing with MS structure with anticorrosive paint along with Walkway over the tanks by gratings/chequered Plate. Walkway of both tanks will be interconnected. 2 Nos. Lightning arrester with 2 Nos. Earth pit and suitable foundation. I&C of MOTOR STARTER PANEL/BOX and cable laying underground including excavation, sand cushioning, protective covering and refilling the trench or on cable tray as per side condition including end termination with necessary glands and lugs for the items mentioned in Part-A Item No. 140 and 141.	ITEMCODE 261	2	Nos.
262	2.132	Installation & Commissioning of oil pipe - 80 NB Dia, MS pipe along with necessary valves and fitting and strainers for unloading of Furnace oil tankers along with necessary supports, hooks and grouting etc	ITEMCODE 262	40	Mtr.
263	2.133	Installation & Commissioning of gear pump of capacity 300 LPM with flame proof motor with suction and discharge port of 2" along with base frame and suitable foundation for the pump	ITEMCODE 263	2	Nos.
264	2.134	Installation & Commissioning of oil pipe- 2" Dia, MS along with 04 Nos. valves and fitting with heat tracing and insulation along with necessary supports, hooks and grouting etc	ITEMCODE 264	300	Mtr.
265	2.135	Installation & Commissioning of Steam Transfer Piping of 50 NB MS IBR seamless pipe with insulation and with necessary flanges and pipe fittings along with necessary supports, hooks and grouting etc	ITEMCODE 265	50	Mtr.
266	2.136	Installation & Commissioning of 50NB valves for Steam Piping	ITEMCODE 266	4	Nos.
267	2.137	Installation & Commissioning of Insulated Steam Transfer Piping of 25NB MS pipe with flanges and pipe fittings for condensate along with necessary supports, hooks and grouting and underground laying etc	ITEMCODE 267	40	Mtr.
268	2.138	Installation & Commissioning of 25NB valves for Steam Piping	ITEMCODE 268	8	Nos.
269	2.139	Installation & Commissioning of float type 25 NB Steam Traps	ITEMCODE 269	4	Nos.
270	2.14	Installation & Commissioning of Fuel Phase (FP) Blend Tank, 2.5 KL capacity, 1350 mm Dia X 1800 mm height, Material of Construction - IS 2062, Plate thickness - Shell and top 5 mm, Bottom dish 6 mm, the blend tank will be vertical, cylindrical, dished bottom, flat flanged top, complete with 20 m, 25 NB SCH 40 spiral coil, 50 mm Dia shaft along with pitch blade turbine agitator, with all necessary nozzle drain, vent, support legs & ladder and 2 HP TEFC, IP 55 motor and Suitable Gear Box for driving turbine agitator and load cell with least count of 1 kg and max net weight carrying capacity of 3000 kg. Installation & Commissioning of Temperature controller with suitable arrangement to maintain temperature of fuel phase in the range of 40-60° C.	ITEMCODE 270	2	No.
271	2.141	Installation & Commissioning of Basket Strainer for Oxidiser Phase , 75 Ltrs capacity, Make of Construction - Vessel SS 304 and Jacket IS 2062, Vessel Shell 5 mm, bottom dish 6 mm, top plate 6 mm, jacket shell 5 mm, dish 6 mm, the strainer will be vertical, cylindrical, dished bottom, flat flanged top jacketed vessel complete with perforated strainer with 18 mesh SS filter cloth, inlet/outlet nozzle, drain etc.	ITEMCODE 271	2	Set
272	2.142	Installation & Commissioning of Basket strainer for Fuel Phase - 50 Ltrs capacity, material of construction SS 304, plate thickness - vessel shell 5 mm, bottom dish 6 mm, top plate 6 mm, jacket shell 5 mm, dish 6 mm, the strainer will be vertical, cylindrical, dish bottom, flat flanged top, jacketed vessel complete with perforated strainer with 18mesh SS filter cloth, inlet/outlet nozzle, drain etc.	ITEMCODE 272	2	Set
273	2.143	Installation & Commissioning of Screw Pump, RMAB 601 of make Roto Pumps Ltd or any other suitable better make for transferring Oxidizer Phase to Blender and 7.5 HP TEFC, IP 55 motor with suitable Gear Box and Coupling and base plate along with suitable foundation for the pump	ITEMCODE 273	2	Set
274	2.144	Installation & Commissioning of Screw Pump, RDAA 492 of make Roto Pumps Ltd or any other suitable better make / Gear Pump for transferring Fuel Phase to Blender and 2.0 HP TEFC, IP 55 motor with suitable Gear Box and Coupling and base plate along with suitable foundation for the pump	ITEMCODE 274	2	Set
275	2.145	Installation & Commissioning of Emulsion Blender of 150 Kg/min capacity, 208 mm O/D X 458 mm Long, Material of Construction - Body of Aluminium 8 mm, Rod 9.5 mm, Rotating shaft SS 410, 28.5 mm Dia, Blades SS 410, 5 mm thick, Blender will be Horizontal cylindrical complete with series of pin and rotating shaft complete with shear blades, end bearing with seals and 25 HP TEFC, IP 55 motor with suitable Gear Box and Coupling base plate	ITEMCODE 275	2	Set
276	2.146	Installation & Commissioning of Control Panel comprising of variable frequency drive (VFD) panel consisting of Danfoss or equivalent make frequency converter suitable for three phase 415 Volts motor of following capacity a) 7.5 HP , b) 2.0 HP, c) 25 HP, d) 7.5 HP along with RPM indicators	ITEMCODE 276	2	No.
277	2.147	Installation & Commissioning of Inline Magnetic Flow Meter / Mass Flow Meter for OB SS 304, range 60 - 150 LPM of IE or equivalent make.	ITEMCODE 277	2	No.
278	2.148	Installation & Commissioning of Inline Magnetic Flow Meter / Mass Flow Meter for FP SS 304 range 5 - 20 LPM of IE or equivalent make	ITEMCODE 278	2	No.
279	2.149	Installation & Commissioning of Screw Pump- WMAA 602 of Roto Pumps Ltd or any other suitable better make for transfer of Emulsion Matrix from Product Pump to Silo and 7.5 HP TEFC, IP 55 motor with suitable gear box and coupling and base plate along with suitable foundation for the pump	ITEMCODE 279	2	No.
280	2.15	Installation & Commissioning of Control Panel along with Safety Device Units (High Pressure, Low Pressure switches, High Temperature Cut-off switch & pressure gauge, Rupture disc) for Emulsion Transfer Pump	ITEMCODE 280	2	No.
281	2.151	Installation & Commissioning of flexible Chemical Hose for Oxidizer Phase unloading and transfer line - 50 mm ID, IS:7654 Type1 with quick release end fittings of BJ or any other suitable better make	ITEMCODE 281	80	Mtr.
282	2.152	Installation & Commissioning of Furnace Oil / HSD unloading and transfer line with Suction line of 50 NB & Delivery line of 40 NB, SCH 10, Material of construction MS as per site requirement along with necessary supports, hooks and grouting etc	ITEMCODE 282	100	Mtr.
283	2.153	Installation & Commissioning of Oxidizer Phase -filter - Screw Pump - flow meter line with suction line 65 NB & delivery line of 50 NB, SCH 10, Material of construction SS 304 as per site requirement along with necessary supports, hooks and grouting etc	ITEMCODE 283	36	Mtr.
284	2.154	Installation & Commissioning of flexible Chemical Hose for Oxidizer Phase - Flow Meter - Blender line - 50 mm ID, IS:7654 Type1 with quick release end fittings of BJ or any other suitable better make	ITEMCODE 284	20	Mtr.
285	2.155	Installation & Commissioning of fuel Phase (FP) - filter - Pump - flow meter line with suction line 50 NB & delivery line 25 NB, MOC SS 304 along with necessary supports, hooks and grouting etc	ITEMCODE 285	36	Mtr.
286	2.156	Installation & Commissioning of Fuel Phase - Flow Meter - Blender - 1.0 inch flexible hose of Gates make or equivalent with both ends fitted with quick coupler of BJ or any other suitable better make along with necessary supports, hooks and grouting etc	ITEMCODE 286	20	Mtr.
287	2.157	Installation & Commissioning of Emulsion Matrix transfer line from Blender to Silo - 65 NB SCH 10 SS 304 along with necessary supports, hooks and grouting etc	ITEMCODE 287	70	Mtr.
288	2.158	Installation & Commissioning of Quick Release Coupling set (male and female) for fixing 50 mm ID transfer hoses with Blend tank outlet - of BJ Corporation Make or equivalent	ITEMCODE 288	2	Set
289	2.159	Installation & Commissioning of SS 304 Three Way Ball Valve 65 mm between Emulsion Matrix Transfer Line from Blender to Silo	ITEMCODE 289	4	No.
290	2.16	Installation & Commissioning of gear pump of capacity 300 LPM with flame proof motor with suction and discharge port of 2" along with base frame and suitable foundation for the pump	ITEMCODE 290	1	Nos.
291	2.161	Installation & Commissioning of Silo for Storage of Emulsion Matrix of 24 KL (30T) capacity, MOC-IS 2062, Size-3000 mm dia X 3000 mm height X 750 mm conical height, Silo will be vertical, cylindrical, conical bottom and top complete with all necessary nozzle, vent, support bracket, with suitable platform with ladder to access the various inlets/outlets at the top of the silo along with insulation of 50 mm thick glass wool pad, chicken mesh and cladding with Aluminium Sheet of 22 SWG and concrete foundation	ITEMCODE 291	1	No.
292	2.162	Installation & Commissioning of Digital Load Cells (Mettler Toledo make) for Silo	ITEMCODE 292	1	No.
293	2.163	Installation & Commissioning of Control Panel along with Safety Device Units (High Pressure, Low Pressure switches, High Temperature Cut-off switch & pressure gauge, Rupture disc) for Emulsion Transfer Pump	ITEMCODE 293	2	No.
294	2.164	Installation & Commissioning of 2.5 inch ID flexible hose of Gates make or equivalent with both ends fitted with quick coupler of BJ make	ITEMCODE 294	10	Mtr.
295	2.165	Installation & Commissioning of Emulsion Matrix transfer line from Hopper of Screw pump to Pump Trucks and Emulsion Tanker to Silo - 65 NB SCH 10 SS 304.	ITEMCODE 295	60	Mtr.
296	2.166	Installation & Commissioning of SS 304 Flanges for above Process Piping	ITEMCODE 296	20	No.
297	2.167	Installation & Commissioning of SS 304 Valves for above Process Piping	ITEMCODE 297	4	No.
298	2.168	Installation & Commissioning of Quick Release Coupling set (male and female) for 50 mm ID flexible chemical hose - of BJ Corporation Make or equivalent along with suitable 1 no. Dust Cap	ITEMCODE 298	8	Set
299	2.169	Installation & Commissioning of Control Panel along with Safety Device Units (High Pressure, Low Pressure switches, High Temperature Cut-off switch & pressure gauge, Rupture disc) for Emulsion Transfer Pump	ITEMCODE 299	1	No.
300	2.17	Installation & Commissioning of Rotary Gear Pump with Impeller Nitrile Rubber with Electric Motor and Suitable Gear Box Make: NAPCO or equivalent Capacity :3’’ -400 LPM, Discharge :10 Bar	ITEMCODE 300	1	No.
301	2.171	Installation & Commissioning of Single Roll Crusher of capacity 15-16 MT/Hr for crushing High Density Ammonium Nitrate Lumps (bag size) 750 mm x 500 mm x 250 mm with opening of the Crusher 900 mm (approx) x 550 mm (approx) and output size 40 mm approx along with suitable drive and motor and starting panel and supply cable and necessary safety features including providing of suitable civil & structural foundation and suitable placement of tail end of the Conveyor and support system along with charge hopper above the Crusher Opening and platform for keeping pallets of HDAN and space for manual charging of bags in to Crusher as per the details mentioned in brief scope of work.	ITEMCODE 301	1	LS
302	2.172	Installation & Commissioning of High Density Ammonium Nitrate conveying system through a Belt Conveyor of width 800-1000 mm & CD of approx 35-40 m along with skirting arrangement on both edges of the Conveyor and suitable drive, motor, starting panel and supply cable and necessary safety features along with 4 nos. discharge points / ploughs for feeding 4 nos. Blend Tanks falling in the discharge zone of around 25m. (The tanks are of dia 3692 mm-OD with a centre to centre gap of 5000 mm between the Tanks) with total lift requirement of around 3m from tail end to discharge zone including providing of suitable Civil & Structural foundation for supporting the Conveyor System along with side walk ways as per the details mentioned in brief scope of work.	ITEMCODE 302	1	LS
303	2.173	Installation and Commissioning of FO Fired Boiler Unit RXD-850 (850 kg/hr) working pressure of 10.54 kg/cm2 with Economizer of Thermax make only along with necessary electrical items supply and installation	ITEMCODE 303	2	No.
304	2.174	Installation and Commissioning of Softner EZ30 of Thermax make only	ITEMCODE 304	1	No.
305	2.175	Installation and Commissioning of Filter EZ40 FDM of Thermax make only	ITEMCODE 305	1	No.
306	2.176	Installation and Commissioning of Oxidation Chamber- E Z200C of Thermax make only	ITEMCODE 306	1	No.
307	2.177	Installation and Commissioning of Mild Steel Chimney (self supported) of 300 mm top diameter and 18 Mtrs height (approx) along with flue gas duct with supporting\nstructure, sampling collection point, platform for collection & spiral ladder up\nto collection point and ladder from collection point to top - to cater 2 nos of 850 Kg/Hr Boilers including appropriate civil foundation for the Chimney to withstand the load and necessary supports including duct piping from Boilers to Chimney, Lightning arrester and light indicator over Chimney with 2 Nos. Earth pit and suitable foundation	ITEMCODE 307	1	No.
308	2.178	Installation and Commissioning of Pressure reducing station, Range- In let pressure 10.54 kg/cm2, Out let pressure 3.5 kg/cm2 Max, Steam flow-Max. 3000 kg/hr, Body-C.S, Inlet size-80mm, outlet-100mm with cast steel valve PRV size 50mm Flange Class ASA 150 as per site requirement along with necessary supports, hooks & grouting etc	ITEMCODE 308	1	No.
309	2.179	Installation and Commissioning of MS Day Tank for FO - 3 KL capacity (round tank with 5 mm plate) with level indicator, 2 nos of 6KW heaters along with temp. controller and cut off switch, necessary electrical supply & connection along with MS piping from Day Tank to Boilers along with necessary MS overhead platform with foundation of suitable size and height with ladder as necessary for housing of FO tank as per site requirement	ITEMCODE 309	1	Set
310	2.18	Installation and Commissioning of 4 nos of HDPE Day Tanks for Soft Water of 3 KL capacity each, along with MS piping from Day Tank to Boilers along with necessary MS overhead platform with foundation of suitable size and height with ladder as necessary for housing of HDPE tank as per site requirement	ITEMCODE 310	4	Set
311	2.181	Installation and Commissioning of Insulated Steam Header Piping 6" MS IBR seamless pipe thickness 8mm with air vent, pressure relief, safety valve, pressure gauge and draining of steam condensate through steam trap, 2 nos outlet for 2 nos PRS with provision of suitable length with flanges and pipe fittings along with NRV 4 nos in between Boiler output and steam header with necessary bend and fittings for catering steam output from 4 nos Boilers 850 kg/hr each and 3 nos more points for future expansion in same header (with a provision for up gradation to 6000 Kg/Hr)	ITEMCODE 311	1	LS
312	2.182	Installation and Commissioning of Steam Transfer Piping of 50 NB MS IBR seamless pipe with insulation and with necessary flanges and pipe fittings from Boiler outlet/steam header to PRS to Blend Tanks along with necessary supports, hooks and grouting overhead/underground laying etc	ITEMCODE 312	180	Mtr.
313	2.183	Installation and Commissioning of Insulated Steam Transfer Piping of 80NB MS pipe with flanges and pipe fittings for recovery of condensate from Blend tanks to condensate recovery tank along with necessary supports, hooks and grouting overhead/underground laying etc	ITEMCODE 313	80	Mtr.
314	2.184	Installation and Commissioning of Insulated Steam Transfer Piping of 25NB MS pipe with flanges and pipe fittings for steam supply / condensate collection along with necessary supports, hooks and grouting overhead/underground laying etc	ITEMCODE 314	90	Mtr.
315	2.185	Installation and Commissioning of 50NB valves for Steam Piping	ITEMCODE 315	35	No.
316	2.186	Installation and Commissioning of 25NB valves for Steam Piping	ITEMCODE 316	30	No.
317	2.187	Installation and Commissioning of float type 25 NB Steam Traps	ITEMCODE 317	30	No.
318	2.188	Installation and Commissioning of water line - 2" Dia, GI, class B along with necessary valves and fittings as per site requirement along with necessary supports, hooks and grouting overhead/underground laying etc	ITEMCODE 318	400	Mtr.
319	2.189	Installation and Commissioning of water line - 1" Dia, GI, class B along with necessary valves and fittings as per site requirement along with necessary supports, hooks and grouting overhead/underground laying etc	ITEMCODE 319	200	Mtr.
320	2.19	Installation and Commissioning of Furnace Oil - 1.5 " Dia, MS along with necessary valves, and fitting with heat tracing and insulation along with necessary support post and structure to run overhead/arrangement to run underground	ITEMCODE 320	200	Mtr.
321	2.191	Installation and Commissioning of Furnace Oil - 1" Dia, MS along with necessary valves, and fitting with heat tracing and insulation along with necessary support post and structure to run overhead/arrangement to run underground	ITEMCODE 321	40	Mtr.
322	2.192	Installation and Commissioning of Monoblock Pump 2HP, Connection Size 2" for delivery up to height approx 40 feet - reputed make like Kirloskar/KSB or equivalent	ITEMCODE 322	2	No.
323	2.193	Preparation, Approval of necessary drawings / layout plans & liaison for obtaining statutory permissions, through “A” or “B” class Electrical competency holder or from concerned authority as applicable, from concerned authorities (if applicable) (applicable statutory fees shall be payable by IOCL) and Installation & Commissioning of items mentioned at Sl. No. 1.195 of Part-A with necessary support base and structures etc	ITEMCODE 323	1	No.
324	2.194	Laying and connection of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required including end termination with necessary glands and lugs on cable tray / in the existing masonry open duct / on wall surface as required. a) Above 35 sq. mm and upto 185 sq. mm. Sl. No. 1.196	ITEMCODE 324	140	Mtr.
325	2.195	Laying and connection of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required including end termination with necessary glands and lugs on cable tray / in the existing masonry open duct / on wall surface as required. a) Upto 35 sq. mm. Sl. No. 1.197 & 1.198	ITEMCODE 325	220	Mtr.
326	2.196	Installation, Testing & commissioning of Diesel operated Pump set complete in all respect i.e. comprising pump, motor of 1450 rpm, Pin Bush type coupling, coupling guard, common base frame, cushy foot mounting, and foundation. \na) Fire Pump of capacity 2280 LPM – (137 M3/Hr) (Make-Kirloskar/KSB/Greaves)	ITEMCODE 326	1	Set
327	2.197	Installation, Testing & commissioning of Pump set complete in all respect i.e. comprising pump, motor of 1450 rpm, Pin Bush type coupling, coupling guard, common base frame, cushy foot mounting, and foundation. \nb) Jockey Pump of Capacity 180 LPM. (Make-Kirloskar/KSB/Greaves)	ITEMCODE 327	1	Set
328	2.198	Installation & Commissioning of Pressure Switch with guide valve and pressure damper including necessary fitting.	ITEMCODE 328	2	Set
329	2.199	Installation & Commissioning of Combined Starting Panel for above four nos. pump set, with Star-Delta type starter for Fire Pump & D.O.L. type starter for Jockey Pump.	ITEMCODE 329	1	No
330	2.2	Installation & Commissioning of Pressure Gauge (100mm dia & 0 to 15 Kg / Sq.cm) with Guide Valve and pressure damper including necessary fittings.	ITEMCODE 330	3	Set
331	2.201	Installation & Commissioning of single headed oblique type Hydrant Valve (Alloy Steel) as per IS: 5290 with PVC blank cap.	ITEMCODE 331	15	No
332	2.202	Installation & Commissioning of 63mm X 15 Mtr. long Hose as per IS: 8423, bounded with pair of Steel Coupling as per IS: 903.	ITEMCODE 332	30	No
333	2.203	Installation & Commissioning of front glassed single door powder coated M.S. Hose Box (16 X 18 SWG) of standard design to accommodate one Branch Pipe with nozzle and 2 lengths of 63mm X 15 Mtr. long Hose.	ITEMCODE 333	15	No
334	2.204	Installation & Commissioning of C.I. Flanged Gate Valve as per IS: 14846, PN 1.6 of 100mm NB	ITEMCODE 334	2	No
335	2.205	Installation & Commissioning of C.I. Flanged Non Return Valve as per IS: 5312, PN 1.6 of 100mm NB	ITEMCODE 335	1	No
336	2.206	Installation & Commissioning of aboveground/underground M.S. piping conforming to IS: 1239 / 3589 with fitting, support, clamp and treatment on outer surface by one coat of primer & two coats of synthetic enamel red paint for 100mm NB,M.S., Medium(Schedule 40)	ITEMCODE 336	350	Mtr
337	2.207	Installation & Commissioning of Mono Block Pump including base frame and protection shed, GI Pipe, Earth Pit etc.	ITEMCODE 337	1	Ls
338	2.208	Construction of Shed consisting Iron Channel fitted Iron profile sheet Size: 4 Mtr X 2.5 Mtr. including RCC Foundation of Pump Base	ITEMCODE 338	1	Set
339	2.209	I&C of 300 Ltr. SS Kettle with agitator with 2 Way Ball Valve 40 NB- 2Nos, 2 Way Ball Valve 25 NB- 2Nos	ITEMCODE 339	1	No.
340	2.21	I&C of Screw Pump, RDAA 492 of make Roto Pumps Ltd or suitable Centrifugal Pump for transferring kettel to tank and 2.0 HP TEFC, IP 55 motor with suitable Gear Box and Coupling and base plate.	ITEMCODE 340	1	Set
341	2.211	I&C of 25 NB pipe, MOC SS 304 necessary nozzel, bend , valve etc	ITEMCODE 341	75	Mtr.
342	2.212	I&C of HDPE Day Tanks of 3 KL capacity	ITEMCODE 342	1	Set
343	2.213	Preparation, Approval of necessary drawings / layout plans & liaison for obtaining statutory permissions, through "A" or "B" class Electrical competency holder, from concerned authorities (applicable statutory fees shall be payable by IOCL)Installation & Commissioning of items mentioned at Sl. No. 1.220 to 1.236 of Part-A (BoQ1) with necessary support base and structures etc	ITEMCODE 343	1	LS
344	2.214	Preparation, Approval of necessary drawings / layout plans & liaison for obtaining statutory permissions, through "A" class Electrical competency holder, from concerned authorities (applicable statutory fees shall be payable by IOCL)Installation & Commissioning of items mentioned at Sl. No. 1.237 of Part-A (BoQ1) with necessary support base and structures etc	ITEMCODE 344	1	LS
345	2.215	Laying and connection of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required including end termination with necessary glands and lugs on cable tray / in the existing masonry open duct / on wall surface as required. a) Upto 35 sq. mm	ITEMCODE 345	936	Mtr.
346	2.216	Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required including end termination with necessary glands and lugs on cable tray / in the existing masonry open duct / on wall surface as required. a) Upto 35 sq. mm	ITEMCODE 346	816	Mtr.
347	2.217	Laying and connection of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required including end termination with necessary glands and lugs on cable tray / in the existing masonry open duct / on wall surface as required. a) Above 35 sq. mm and upto 185 sq. mm	ITEMCODE 347	1162	Mtr.
348	2.218	Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required including end termination with necessary glands and lugs on cable tray / in the existing masonry open duct / on wall surface as required. a) Above 35 sq. mm and upto 185 sq. mm	ITEMCODE 348	293	Mtr.
349	2.219	Laying and connection of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required including end termination with necessary glands and lugs on cable tray / in the existing masonry open duct / on wall surface as required. a) Upto 185 sq. mm	ITEMCODE 349	2450	Mtr.
350	2.22	Installation & Commissioning of items mentioned at Sl. No. 1.258 to 1.263 of Part-A (BoQ1) and Testing & Commissioning of Earth Pit complete in all respects like earthing plate, GI pipe, Aluminium Strip, charcoal & Salt etc and laying & connections of earth flat/GI wire and lightning protection and fixing of lighting poles and connections testing etc.	ITEMCODE 350	1	LS
351	2.221	Installation & Commissioning of items mentioned at Sl. No. 1.264 to 1.277 and 1.280 of Part-A (BoQ1) all wiring for light & sockets including necessary civil modification and grouting etc.	ITEMCODE 351	1	LS
352	2.222	Installation & Commissioning of items mentioned at Sl. No. 1.278 and 1.279 of Part-A (BoQ1) MS cable tray including necessary civil foundation, grouting and welding with Iron angle supports.	ITEMCODE 352	1	LS
353	2.223	Erection, Testing & Commissioning of Outdoor, Silent Type 250 KVA Diesel Generating Set as per technical specification of OEM or manufacturer of DG Set along with AMF and exhaust gas piping with necessary fittings and accessories as required and installation of suitable cable (approx 40 mtrs.) for connecting incoming supply from DG Set with AMF and MCC panel including arrangement of load testing (Diesel required for load testing will be supplied by IOCL)	ITEMCODE 353	1	LS
354	2.224	Civil works for construction of base platform for housing the DG Set outdoor nearby the main MCC panel room	ITEMCODE 354	1	LS
355	2.225	Preparation, Approval of necessary drawings / layout plans & liaison for obtaining statutory permissions, through "A" or "B" class electrical competency holder as applicable, from concerned authorities (applicable statutory fees shall be payable by IOCL) and Installation & Commissioning of items mentioned at sl. no. 1.286 to 1.289 of Part-A (BoQ1) along with lying of cables by making suitable trenches/through piping at road crossing/ critical areas for underground cable laying and cable connections with necessary glands and lugs and end connections to synchronize the DG supply with MCC panel and making of earth pits (4 nos. as mentioned in BoQ1) complete in all respects like earthing plate, GI pipe, GI Strip, charcoal & salt etc including earth pit resistance testing & certification and lying & connections of earth flat/GI wire etc.	ITEMCODE 355	1	LS
356	2.226	Preparation, Approval of necessary drawings / layout plans & liaison for obtaining statutory permissions, through "A" or "B" class Electrical competency holder as applicable, from concerned authorities (applicable statutory fees shall be payable by IOCL) Installation & Commissioning of items mentioned at Sl. No. 1.290 to 1.293 of Part-A (BoQ1) along with construction of civil foundation & grouting for High Mast Tower.	ITEMCODE 356	2	LS
357	2.227	I&C of all CCTV items i.e. Sl. No. 1.294 to 1.313	ITEMCODE 357	1	LS
358	2.228	I&C of misc items mentioned in Sl. No. 1.314 to 1.318	ITEMCODE 358	1	LS
359	2.229	I&C of all Lab Equipments mentioned in Sl. No. 1.319 to 1.324	ITEMCODE 359	1	LS
360	2.23	Installation & Commissioning and Stamping Charges of Pit Less Type Electronic Weighbridge 60T Capacity, as per technical specification given in Brief Scope of Work	ITEMCODE 360	1	LS
361	2.231	Construction of Civil Foundation and Ramp for 60 MT Weigh Bridge	ITEMCODE 361	1	LS