Tender For Fabrication Work For The Year 2021-22, SUGAR MILL PALWAL-Haryana

Tender For Fabrication Work For The Year 2021-22 - 1 M.S Pipe Line 2 Dismantling Of Pipe Lines 1” To 3’’ 3 Do 4’’To 11’’ 4 Do 12” To 20” 5 Do 21’’To 48’’ 6 M.S Pipe Line 7 Erection Of Pipe Line From 1” To 3” Dia 8 Do 4” To 11” 9 Do 12 To 20 10 Do 21 To 48 11 Fabrication Of Pipe Line From 12”Above 12 Flanges And Blind Up To 48” 13 Dismantling Of Flanges / Blind 14 Refitting Of Old / New Flanges / Blind 15 Fabrication Of Flanges Blind From M.S. Plate 16 Bends, Reducers And Nipples ( Up To 1’’ To 12’’ ) 17 Dismantling 18 Fabrication 19 Fitting 20 Bends, Reducers And Nipples ( Above 12’’ ) 21 Dismantling 22 Fabrication 23 Fitting 24 Dismantling , Fab. And Erection Of M.S. / G.L Pipe Naccessories ( Tee, Cross, Distance Piece Up To 12’’ ) N 25 Dismantling 26 Fabrication 27 Erection 28 Dismantling , Fab. And Erection Of M.S. / G.L Pipe Accessories ( Tee, Cross, Distance Piece Above 12’’ ) N 29 Dismantling 30 Fabrication 31 Erection 32 Dismantling , Fab. And Erection Of M.S. Tanks / Vassals From M.S Plate, Angle M.S Channel I Section Etc ( Up To 6 Mm Plates ) N 33 Dismantling 34 Fabrication 35 Erection 36 Dismantling, Fab. And Erection Of M.S. Plate Jobs N Boiler Ducting Boiler Casing Etc. ) Above 6 Mm Plate N 37 Dismantling 38 Fabrication 39 Erection 40 Dismantling And Erection Of Railing Ndismantling 41 Fabrication 42 Erection 43 Valves 44 Dismantling 1’’ To 6’’ 45 Dismantling 7’’ To 12’’ 46 Dismantling Above 12’’ Size 47 Fitting 1’’ To 6’’ 48 Fitting 7’’ To 12’’ 49 Fitting Above 12’’ Size 50 S.S Pipe Line 51 Dismantling Of All Size 52 Erection All Size 53 Dismantling, Fab., And Erection Of S.S.Pipe Accessories N ( Tee, Cross, Distance Piece, Nipples Reducer And Bend ) Up To 12” Ndismantling 54 Fabrication 55 Erection 56 Patch Work On Tank And Pipe N ( M S Plate Cutting, Fitting And Welding, 02 Round Welding ) N 57 Dismantling , Fabrication And Erection Of Cone Of Nbigger Size Will Be Treated N Dismantling N 58 Fabrication 59 Erection 60 Fabrication And Erection Of Gutter Of Any Size By Nrequired Thickness ( Bigger Size Will Be Treat As Dia ) N 61 Dismantling , Fabrication And Erection Of 3 Nos. Hood Nof Cutter , Chopper And Leveler By 8 / 6 Mm M.S. Plate N 62 Dismantling , Fabrication And Erection Of M.S. Boiler Chimney Nbase Dia = 3.5 M, Top Dia= 2.5 M, Hight Dia = 30 M N 63 Dismantling Of Old And Erection Of New I D Fan N Taper Cone. 64 Dismantling , Fabrication And Erection Of Old Ducting From I.D. Fan Inlet Damper To I D Fan . N 65 Dismantling , Fabrication And Erection Of Flue Gas Nducting Size 5’ X 5’ N 66 Dismantling , Fabrication And Erection Of I.D.. Fan Casing Nform 8 To 10Mm M.S Plate . N 67 Dismantling , Fabrication And Erection Of I.D. Fan Noutlet Damper 68 Dismantling , Fabrication And Erection Of I.D. Nfan Inlet Damper 69 Dismantling , Fabrication And Erection Of Bagasse Nelevator, Bagasse Carrier And Rbc Bottom And Side Nplate Worn Out Portion N 70 Dismantling , Fabrication And Erection Of Boiler Bagasse Feeding Chute By 8 / 6 Mm M.S. Plate. N 71 Dismantling , Erection And Fabrication Of Umbrella Of Pan. 72 Dismantling , Fabrication And Erection Of Save All Of Quad Body. Ndismantling 73 Fabrication 74 Erection 75 Dismantling , Fabrication And Erection Of Save All Of Pan. Ndismantling 76 Fabrication 77 Erection 78 Stair Case ( Fab. With Chaquered Plate / Old Plate And Pipe Line ) Ndismantling 79 Fabrication 80 Erection 81 Dismantling And Erection Of Pump Up To 4’’ And 15 Hp Motor Shifting Of Pump / Motor More Than 20 Mtr Distance N 82 Dismantling 83 Erection 84 Dismantling And Erection Of Pump More Than 4” And N15 H.P Motor Shifting Of Pump / Motor More Than N20 Mtr Distance 85 Dismantling 86 Erection ( Pump / Motor ) 87 Ammonia And Gas Coils N ( Dismantling , Fab. And Erection ) 88 Dismantling 89 Fabrication 90 Erection 91 Dismantling , Fabrication And Erection Of New Plate Form As Per Requirement From Old M S Plate 6 Mm To 8 Mm Thickness. Up To 2 Sqm Ndismantling 92 Fabrication 93 Erection 94 Dismantling , Fabrication, And Erection Of New N Plate From By M S / Chequared Plate More Than 2 Sqmtr Ndismantling 95 Fabrication 96 Erection 97 Crystallizer Coils Ndismantling 98 Fabrication 99 Erection 100 Old And Worn Out Staging , Plate Farm Tank, Vassals. Ndismantling 101 Fabrication 102 Erection 103 Repairing Of Rubber Seated Exhaust / Vapor Valve N Above 16 “ 104 Dismantling , Fabrication And Erection Of Side Plate Of Cane Kicker Cutter, Leveler, And Chopper By 8 / 6 Mm M.S. Plate N 105 Dismantling , Fabrication And Erection Of Mill Juice Tray By 8 Mm / 10 Mm M.S Plate N 106 Dismantling Of Existing Cane Carrier Chute And Nfabrication And Erection Of 8 To 10 Mm M.S Plate 107 Repairing Of Steam Jacket For Sulphur Furnace 108 Replacement Of Steam Jacket Of Evaporator Bodies 109 Strengthening Of Vapour Line Above 16” By Inner And Nouter Side / Ring Of Angle / Pipes N 110 Dismantling , Fabrication And Erection Of Support Angle, Pipe, Channel At Any Equipment N 111 Hopper Centre Piece By 12 Mm Plate 112 Dismantling 113 Fabrication 114 Erection 115 Hopper Tray Ndismantling 116 Fabrication 117 Erection 118 Sulphur Furnace Cooler Dismantling , Fab. And Nerection Work 119 Sulphur Furnace Scrubber Dismantling , Fabrication N And Erection Work N 120 ‘B’ Vacuum Crystallizer Shell To Be Changed From N 10 Mm M.S. Plate N 121 ‘C, Vacuum Crystallizer Shell To Be Changed From 10 Nmm M.S. Plate N 122 Dismantling Of Rcc Plate Form Of Sulpher Furnace Nwith Shifting Of Waste Nmaterial Complete In All Respects And Strengthening The Same With All Column And M.S. Beams N 123 Strengthening Of Factory Columns Of Various Size By N10 Mm M.S.Plate Angle Channels Etc. 124 Strengthening Of Factory Beams Of Any Size By M.S.Plate Angle Channel I. Section Etc. 125 Chipping , Cleaning And Painting Of Columns And Beams Nor Staging Of Factory Machinery. N 126 Painting One Coat With Ready Mixed Paint In Factory Nbuilding M.S. Column ( 25 Mtr Approx. Height. And N15-5 Mtr Height Approx ) And M.S Trusses Including Nrubbing Down Old ( If Required At Site.All The Bracing Nand Purlins Are Included With This Work. 127 Dismantling, Fabrication And Erection Of Any Size Nfactory / Building, Columns Beams And Trusses 128 Dismantling , Fabrication And Erection Of Worn Out Nwater Pipes, Nozzles, Drain Box Etc. 129 Dismantling , Fabrication And Erection Of Worn Out Shell N Of Both Wet Scrubber N 130 Dismantling, Fabrication And Erection Of Worn Out Ninternal Of Both Wet Scrubber 131 Dismantling, Fabrication And Erection Of Worn Flue Gas Nducting Size 5’ X5’Of Both Wet Scrubber From Damper To Nchimney N 132 Replacement Of Worn Out Portion Of Supports Of Nmolasses Tank Roof. 133 Replacement Of Worn Out Portion Of Roof Of Nmolasses Tank 134 Dismantling Of Boiler Exit Flue Gas Damper 135 Dismantling, And Erection Of Boiler I.D., F.D. Nfan Impeller 136 Fabrication And Erection Of 06 Nos. M.S. Column Below N Sulpher Furnace Plate Form And Raising Of Same Up To N Required Height. 137 Replacement Of Weak Portion Of Molasses Tank Up To A N Height Of 10 Mtr By 6 Mm, 8 Mm, 10 Mm Plate Etc. N N 138 Providing Roof Above Molasses Khacha Pit By M.S. / Cgi N Sheets With Proper Columns, Staging And Tresses 139 Dismantling And Assembling Of Air Heater Outlet Ducting 140 Dismantling Of Worn Out Air Heater Tubes 141 Replacement Of Worn Out Air Heater Tubes. 142 Dismantling , Fabrication, Erection Of Worn Out Both Nboiler Blow Down Line Boiler To Drain Pit. N 143 Dismantling, Fabrication, Erection Of Worn Out Of 2 Nos. N5” Long Bend Of Feed Water Line Header N 144 Removal Of Hanging Old Lagging And Fixing Of New Glass Wool, Plastered By P.O.P Or Hasean Cloth And Covered Wire Netting ( Murga Jali ) Without Material Up To 75 Mm Thickness N 145 Replacement Of Juice Heater Partition Plate In All Nrespects 146 Pan No.1 Top Cone Replacement Work. 147 Reconditioning Of Worn Out 02 Nos. J.H. ( 04 Nos Covers ) Juice Heater Grooves With Respect To Its Top / Bottom Mating At Outside Cover N 148 Dismantling And Erection Of 6 Dia C.I. Cross. 149 Fabrication Of 6 Dia C.I. Cross 150 Dismantling , Fabrication, Erection Of 10 X 20 Vacuum N Filter Mud Tray N 151 Dismantling Of Worn Out Body Shell Of Pan No. 6 152 Fabrication And Erection Of Body Shell Pan No. 6 153 Dismantling , Fabrication, Erection Of 8 X 16 Vacuum Nfilter Mud Tray N 154 Juice Heater No. 1 Both Covers To Be Dismantle And Erection Nafter Machining Work At Both Shafts. 155 Dismantling Of Worn Out Bottom And Fabrication And Erection Of New Bottom Of Crystlizer No. 3, 4, 9 10 And 11 Entrainment Catcher Of Pan 156 Dismantling, Fabrication And Erection Of M.S Band 12” To 20” 157 Dismantling, Fabrication And Erection Of M.S Band 21” To 40” 158 Dismantling Of Evaporator ( Quad ) Spare Body S.S. Tubes 159 Re-Tubing Of Evaporator ( Quad ) Spare Body 160 Dismantling Of Vc-1100 M3 S.S. Tubes 161 Re-Tubing Of Vc-1100 M3 S.S. Tubes 162 Increasing The Length Of Hydraulic Grab Fingers 163 Dismantling , Fabrication, Erection Of Kicker Drum Nwith Holder Assembly 164 Dismantling , Erection Commission Of Pan Discharge Valve Nof Pan No 5 And 6 165 Modification Of Mill Kush Kush Conveyor 166 Fabrication Of Staging Of C / F Machine Nk 1100 And Erection And Commission Of C / F Machine Nk 1100 2 Nos 167 Fabrication, Erection Of New Juice Door Filtration System 168 Dismantling , Fabrication, Erection Of Flocculating Chamber Top N And Bottom Plate Of Door 169 Crystallizer Spiral Ribbon Strip Has To Dismantle And Again Set Right Fitting. Nworn Out Arms And Other Related Work Also To Be Done 170 Dismantling , Fabrication, Erection Of Worn Out Runner Of Cane Carrier / Bagasse Elevator / Rbc / Mbc N 171 Dismantling, Fabrication And Erection Of Agitator Of Vacuum Filter 172 Dismantling , Fabrication, Erection Of Worn Out Portion Nof D.S.M. Screen 173 Fabrication, Erection Of I.D Fan Cone Ring With Flange 174 Erection And Commissioning Of B- Messcutte C / F Machine Including Machine Structure , Leveling Of Machine And Related Work To Be Done In All Respect Of M / C 175 Dismantling Of Old Worn Out And Fabrication, Erection Of Nnew Juice Sulphitor Internal Drum 176 Juice Ring Fabrication By 6Mm Plate For Mill Rollers 177 Hinge Type Cover Fabrication At Copper, Leveler And Cutter 178 Boilers No.2 6” Live Steam Line From Boiler No.2 To Main Steam Distributer To Be Modified N 179 Both Boilers 4” Dia Main Blow Down Line From Chimney To Pit Replacement Work N 180 Boiler Feed Tank Replacement 181 All Bagasse Chute Of Both Boilers To Be Modified 182 Rack And Pinion To Be Fitted In Mbc At Bagasse Loading Chute 183 Labour Supply ( Per Day 8 Hr. Basis ) Na ) Turner / Mechinist Nb ) Fitter Nc ) Welder Nd ) Helper Ne ) Khalasi N 184 Dismantling, Fab. & Erection Of Widening Work Of Mbc Nby 250 Mm Of Existing Columns Approx. Total Turf Length=125 M N 185 Dismantling, Fab. & Erection Of Tail End Shaft, Idler Shaft And Ndriving Shaft With Plumber Blocks & Driving Unit Etc For Mbc & Ncane Carrier. ( 5 Nos Shaft For Mbc ) N 186 Dismantling, Fab. & Erection Of Cane Carrier N02 Nos. Shaft

Refer document

Refer document

Refer document

Name of Work: Tender for Fabrication work for the year 2021-22
	Sl. No.	Item Description	Item Code / Make	Quantity	Units
1	1	M.S Pipe Line		1	Per.in.dia/ ft.length
2	2	Dismantling of pipe lines 1” to 3’’		1	Per.in.dia/ ft.length
3	3	do 4’’to 11’’		1	Per.in.dia/ ft.length
4	4	do 12” to 20”		1	Per.in.dia/ ft.length
5	5	do 21’’to 48’’		1	Per.in.dia/ ft.length
6	6	M.S Pipe Line		1	Per.in.dia/ ft.length
7	7	Erection of pipe line from 1” to 3” dia		1	Per.in.dia/ ft.length
8	8	do 4” to 11”		1	Per.in.dia/ ft.length
9	9	do 12 to 20		1	Per.in.dia/ ft.length
10	10	do 21 to 48		1	Per.in.dia/ ft.length
11	11	Fabrication of pipe line from 12”above		1	Per.in.dia/ ft.length
12	12	Flanges and blind up to 48”		1	Per inch dia/pc
13	13	dismantling of flanges/blind		1	Per inch dia/pc
14	14	refitting of old/new flanges/blind		1	Per inch dia/pc
15	15	fabrication of flanges blind from M.S. plate		1	Per inch dia/pc
16	16	Bends, reducers and nipples (up to 1’’ to 12’’)		1	Per inch dia/pc
17	17	Dismantling		1	Per inch dia/pc
18	18	fabrication		1	Per inch dia/pc
19	19	fitting		1	Per inch dia/pc
20	20	Bends, reducers and nipples (above 12’’)		1	Per inch dia/pc
21	21	Dismantling		1	Per inch dia/pc
22	22	fabrication		1	Per inch dia/pc
23	23	fitting		1	Per inch dia/pc
24	24	Dismantling , fab. and erection of M.S. / G.l pipe \nAccessories ( Tee, cross,distance piece up to 12’’) \n		1	Per inch dia/pc
25	25	Dismantling		1	Per inch dia/pc
26	26	Fabrication		1	Per inch dia/pc
27	27	Erection		1	Per inch dia/pc
28	28	Dismantling , fab. and erection of M.S. / G.l pipe Accessories ( Tee,cross, distance piece above 12’’) \n		1	Per inch dia/pc
29	29	Dismantling		1	Per inch dia/pc
30	30	Fabrication		1	Per inch dia/pc
31	31	Erection		1	Per inch dia/pc
32	32	Dismantling , fab. and erection of M.S. tanks/vassals from M.S plate, angle M.S channel 'I' section etc ( up to 6 mm plates)\n		1	L.S. /pc
33	33	Dismantling		1	P MT
34	34	Fabrication		1	P MT
35	35	Erection		1	P MT
36	36	Dismantling, Fab. and Erection of M.S. plate jobs \n boiler ducting boiler casing etc.) above 6 mm plate\n		1	P MT
37	37	Dismantling		1	P MT
38	38	Fabrication		1	P MT
39	39	Erection		1	P MT
40	40	Dismantling and Erection of railing \nDismantling		1	Per.in.dia/ ft.lth
41	41	Fabrication		1	Per.in.dia/ ft.lth
42	42	Erection		1	Per.in.dia/ ft.lth
43	43	Valves		1	Per inch dia/pc
44	44	Dismantling 1’’ to 6’’		1	Per inch dia/pc
45	45	Dismantling 7’’ to 12’’		1	Per inch dia/pc
46	46	Dismantling above 12’’ size		1	Per inch dia/pc
47	47	fitting 1’’ to 6’’		1	Per inch dia/pc
48	48	fitting 7’’ to 12’’		1	Per inch dia/pc
49	49	fitting above 12’’ size		1	Per inch dia/pc
50	50	S.S Pipe Line		1	Per inch dia / ft. length
51	51	Dismantling of all size		1	Per inch dia /ft. length
52	52	Erection all size		1	Per inch dia /ft. length
53	53	Dismantling,fab., and erection of S.S.pipe Accessories\n(tee,cross,distance piece,nipples reducer and bend) up to 12” \nDismantling		1	Per inch dia/pc
54	54	Fabrication		1	Per inch dia/pc
55	55	Erection		1	Per inch dia/pc
56	56	Patch Work on tank and pipe \n(M S plate cutting, fitting and welding, 02 round welding) \n		1	Per sq. mtr.
57	57	Dismantling , Fabrication and Erection of cone of \nbigger size will be treated\n Dismantling \n		1	Per inch dia /mtr. lth.
58	58	Fabrication		1	Per inch dia / mtr. lth.
59	59	Erection		1	Per inch dia / mtr. lth.
60	60	Fabrication and Erection of gutter of any size by \nRequired thickness (bigger size will be treat as dia) \n		1	per cross sectional area \nper mtr running length\n
61	61	Dismantling , fabrication and erection of 3 Nos. hood \nof cutter ,chopper and leveler by 8/6 mm M.S. plate\n		1	L.S. per hood
62	62	Dismantling , Fabrication and erection of M.S. Boiler Chimney\nBase DIA = 3.5 M, Top Dia= 2.5 M, Hight Dia = 30 M\n		1	Per Feet height
63	63	Dismantling of old and erection of new I D Fan\n taper cone.		1	L.S. / Unit
64	64	Dismantling , Fabrication and erection of old ducting from I.D. fan inlet damper to I D Fan .\n		1	L.S. / Unit
65	65	Dismantling , Fabrication and erection of flue gas \nducting size 5’ x 5’ \n		1	L.S./Unit
66	66	Dismantling , fabrication and erection of I.D.. fan casing \nform 8 to 10mm M.S plate .\n		1	L.S. / Unit
67	67	Dismantling , fabrication and erection of I.D. Fan \noutlet damper		1	L.S. /Unit
68	68	Dismantling , fabrication and erection of I.D. \nFan inlet damper		1	L.S. /Unit
69	69	Dismantling ,fabrication and Erection of Bagasse \nelevator, bagasse carrier and RBC bottom and side \nplate worn out portion \n		1	Per sq.mtr.
70	70	Dismantling , fabrication and erection of Boiler bagasse feeding Chute by 8/6 mm M.S. plate. \n		1	L.S. /Unit
71	71	Dismantling , erection and fabrication of umbrella of pan.		1	L.S./Per pc.
72	72	Dismantling , fabrication and erection of save all of Quad body. \nDismantling		1	L.S.// Unit
73	73	Fabrication		1	L.S./ Unit
74	74	Erection		1	L.S. / Unit
75	75	Dismantling , Fabrication and Erection of save all of pan. \nDismantling		1	L.S. / Unit
76	76	Fabrication		1	L.S./ Unit
77	77	Erection		1	L.S./ Unit
78	78	Stair case( fab. with chaquered plate /old plate and pipe line) \nDismantling		1	Per ft width
79	79	Fabrication		1	Per ft width
80	80	Erection		1	Per ft width
81	81	Dismantling and erection of pump up to 4’’ and 15 hp motor Shifting of pump / motor more than 20 mtr distance \n		1	per inch suction/hp
82	82	Dismantling		1	per inch suction/hp
83	83	Erection		1	per inch suction/hp
84	84	Dismantling and erection of pump more than 4” and \n15 H.P motor Shifting of pump / motor more than \n20 mtr distance		1	per inch suction/hp
85	85	Dismantling		1	per inch suction/hp
86	86	Erection ( pump / motor)		1	per inch suction/hp
87	87	Ammonia and gas coils\n ( Dismantling , fab. and erection)		1	Per inch dia /mtr. lth.
88	88	Dismantling		1	Per inch dia / mtr.lth.
89	89	Fabrication		1	Per inch dia /mtr.lth.
90	90	Erection		1	Per inch dia /mtr.lth.
91	91	Dismantling , fabrication and erection of new plate form as Per requirement from old M S plate 6 mm to 8 mm thickness. up to 2 sqm \nDismantling		1	per sq.mtr.
92	92	Fabrication		1	per sq.mtr.
93	93	Erection		1	per sq.mtr
94	94	Dismantling , fabrication, and erection of new \n Plate from by M S/ chequared plate more than 2 sqmtr\nDismantling		1	P M T
95	95	Fabrication		1	P M T
96	96	Erection		1	P M T
97	97	Crystallizer Coils \nDismantling		1	Per inch dia /mtr.lth
98	98	Fabrication		1	Per inch dia /mtr. lth
99	99	Erection		1	Per inch dia /mtr. lth
100	100	Old and worn out staging , plate farm tank, vassals. \nDismantling		1	P M T
101	101	Fabrication		1	P M T
102	102	Erection		1	P M T
103	103	Repairing of rubber seated exhaust /vapor valve \n above 16 “		1	Per in. dia.Per pc
104	104	Dismantling , fabrication and erection of side plate of cane kicker cutter, leveler, and chopper by 8/6 mm M.S. plate\n		1	Per.sq.mtr
105	105	Dismantling , fabrication and erection of mill juice tray by 8 mm/10 mm M.S plate \n		1	L.S.per mill tray
106	106	Dismantling of existing cane carrier chute and \nfabrication and erection of 8 to 10 mm M.S plate		1	L.S. Unit
107	107	Repairing of steam jacket for sulphur furnace		1	Per pc
108	108	Replacement of steam jacket of evaporator bodies		1	L.S. per body
109	109	Strengthening of vapour line above 16” by inner and \nouter side/ring of angle/pipes \n		1	Per pc
110	110	Dismantling , fabrication and erection of support angle,pipe, channel at any equipment \n		1	per running\n mtr.length\n
111	111	Hopper centre piece by 12 mm plate		1	L.S./Pc
112	112	Dismantling		1	L.S./pc
113	113	Fabrication		1	L.S./pc
114	114	Erection		1	L.S./pc
115	115	Hopper tray \nDismantling		1	Per. Sq. mtr.
116	116	Fabrication		1	Per. Sq. mtr.
117	117	Erection		1	Per. Sq. mtr.
118	118	Sulphur Furnace cooler dismantling ,fab. and \nerection work		1	L.S/pc
119	119	Sulphur Furnace scrubber dismantling , fabrication\n and erection work \n		1	L.S/pc
120	120	‘B’ Vacuum crystallizer shell to be changed from\n 10 MM M.S. plate \n		1	L.S.
121	121	‘C, Vacuum crystallizer shell to be changed from 10 \nMM M.S. plate \n		1	L.S.
122	122	Dismantling of RCC plate form of Sulpher Furnace \nwith shifting of waste \nmaterial complete in all respects and strengthening the same with all column and M.S. beams\n		1	L.S/S.F
123	123	Strengthening of factory columns of various size by \n10 mm M.S.Plate angle channels etc.		1	per running mtr.
124	124	Strengthening of factory beams of any size by M.S.plate angle channel I. Section etc.		1	per running mtr.
125	125	Chipping ,cleaning and painting of columns and beams \nor staging of factory machinery.\n		1	per mtr.
126	126	Painting one coat with ready mixed paint in factory \nbuilding M.S. column ( 25 mtr approx. height. and \n15-5 mtr height approx) And M.S trusses including \nrubbing down old ( if required at site.All the bracing \nand purlins are included with this work.		1	Per.mtr.
127	127	Dismantling, Fabrication and erection of any size\nfactory/Building,columns beams and trusses		1	L.S /unit
128	128	Dismantling ,Fabrication and erection of worn out \nWater pipes, nozzles, drain box etc.		1	L.S
129	129	Dismantling ,Fabrication and erection of worn out shell\n of both wet Scrubber \n		1	L.S
130	130	Dismantling, Fabrication and erection of worn out \ninternal of both wet Scrubber		1	L.S
131	131	Dismantling, Fabrication and erection of worn flue gas \nducting Size 5’ x5’of both Wet Scrubber from damper to \nchimney \n		1	per sq mtr.
132	132	Replacement of worn out portion of supports of \nmolasses tank roof.		1	per sq.mtr.
133	133	Replacement of worn out portion of roof of \nmolasses tank		1	per sq.mtr.
134	134	Dismantling of Boiler exit flue gas damper		1	L.S
135	135	Dismantling, and erection of Boiler I.D., F.D. \nFan impeller		1	L.S
136	136	Fabrication and erection of 06 Nos. M.S. column below\n sulpher furnace plate form and raising of same up to\n required height.		1	L.S
137	137	Replacement of weak portion of molasses tank up to a\n height of 10 mtr by 6 mm,8 mm,10 mm plate etc.\n \n		1	per mtr.
138	138	Providing roof above molasses khacha pit by M.S./CGI\n sheets with Proper columns, staging and tresses		1	per mtr.
139	139	Dismantling and assembling of air heater outlet ducting		1	L.S/unit
140	140	Dismantling of worn out Air Heater tubes		1	Per tube
141	141	Replacement of worn out Air Heater tubes.		1	Per tube
142	142	Dismantling , fabrication, erection of worn out both\nboiler blow down line boiler to drain pit.\n		1	per.in dia/ft
143	143	Dismantling, fabrication, erection of worn out of 2 nos.\n5” long bend of feed water line header\n		1	L.S/unit
144	144	Removal of hanging old lagging and fixing of new glass wool, plastered by P.O.P or hasean cloth and covered wire netting (murga jali) without material Up to 75 mm thickness\n		1	per sq.ft
145	145	Replacement of juice heater partition plate in all \nrespects		1	per juice heater
146	146	Pan No.1 top cone replacement work.		1	L.S
147	147	Reconditioning of worn out 02 Nos. J.H. ( 04 Nos covers)Juice Heater grooves with respect to its top/bottom mating at outside cover\n		1	per juice heater
148	148	Dismantling and erection of 6" dia C.I. cross.		1	L.S
149	149	Fabrication of 6" dia C.I. cross		1	L.S
150	150	Dismantling , fabrication, erection of 10' x 20 ' vacuum\n filter mud tray\n		1	L.S
151	151	Dismantling of worn out body shell of pan no. 6		1	L.S
152	152	Fabrication and erection of body shell pan no. 6		1	L.S
153	153	Dismantling , fabrication, erection of 8' x 16 ' vacuum \nfilter mud tray\n		1	L.S
154	154	Juice heater no. 1 both covers to be dismantle and erection \nafter machining work at both shafts.		1	L.S
155	155	Dismantling of worn out bottom and fabrication and erection of new bottom of Crystlizer no. 3,4,9 10 and 11 entrainment catcher of pan		1	L.S/unit
156	156	Dismantling, Fabrication and erection of M.S band 12” to 20”		1	L.S
157	157	Dismantling, Fabrication and erection of M.S band 21” to 40”		1	L.S
158	158	Dismantling of evaporator (quad) spare body S.S. tubes		1	L.S
159	159	Re-tubing of evaporator (quad) spare body		1	L.S
160	160	Dismantling of VC-1100 m3 S.S. tubes		1	L.S/unit
161	161	Re-tubing of VC-1100 m3 S.S. tubes		1	L.S
162	162	Increasing the length of hydraulic grab fingers		1	L.S/unit
163	163	Dismantling , fabrication, erection of kicker drum \nwith holder assembly		1	L.S
164	164	Dismantling , erection commission of pan discharge valve \nof pan no 5 and 6		1	L.S/unit
165	165	Modification of mill Kush Kush Conveyor		1	L.S
166	166	Fabrication of staging of C/F machine NK 1100 and erection and commission of C/F machine NK 1100 2 Nos		1	L.S
167	167	Fabrication, erection of new juice door filtration system		1	L.S/unit
168	168	Dismantling , fabrication, erection of flocculating chamber top\n and bottom plate of door		1	Per running mtr.
169	169	Crystallizer spiral ribbon strip has to dismantle and Again set right fitting. \nWorn out arms and other related Work also to be done		1	L.S
170	170	Dismantling , fabrication, erection of worn out runner of cane carrier/bagasse elevator/ RBC/MBC\n		1	L.S
171	171	Dismantling, Fabrication and Erection of agitator of vacuum filter		1	L.S
172	172	Dismantling , fabrication, erection of worn out portion \nof D.S.M. screen		1	L.S/unit
173	173	Fabrication, erection of I.D fan cone ring with flange		1	L.S
174	174	Erection and commissioning of B- messcutte C/F machine including machine structure ,leveling of machine and related work to be done in all respect of M/C		1	L.S
175	175	Dismantling of old worn out and fabrication, erection of \nnew juice sulphitor internal drum		1	L.S/cutter/kicker/\nleveler
176	176	Juice ring fabrication by 6mm plate for mill rollers		1	Per mtr running \nlength
177	177	Hinge type cover fabrication at copper, leveler and cutter		1	L.S
178	178	Boilers No.2 6” live steam line from Boiler No.2 to main steam distributer to be modified\n		1	L.S
179	179	Both Boilers 4” dia main blow down line from chimney to pit replacement work\n		1	Per day
180	180	Boiler feed tank replacement		1	Per day
181	181	All Bagasse chute of both boilers to be modified		1	Per day
182	182	Rack and pinion to be fitted in MBC at Bagasse loading chute		1	Per day
183	183	Labour supply ( per day 8 hr. basis)\na) Turner/Mechinist\nb) Fitter\nc) Welder\nd) Helper\ne) Khalasi\n		1	Per day
184	184	Dismantling, Fab. & Erection of widening work of MBC\nby 250 MM of existing columns approx. total turf length=125 M\n		1	Per running \nmeter length
185	185	Dismantling, Fab. & Erection of tail end shaft, idler shaft and\ndriving shaft with plumber blocks & driving unit etc for MBC &\ncane carrier. (5 Nos shaft for MBC) \n		1	L.S
186	186	Dismantling, Fab. & Erection of cane carrier \n02 Nos. shaft		1	L.S