Providing B.T. To Borgaon Chincholi Pardi Saongi Road O.D.R.36 Km 13 / 0 To 15 / 00 , Tah. Hinganghat, Distt. Wardha
Tender Value
Ref. Documents
Estimated cost
Bid Submission
08 Jul 2021
0 days left
EMD
22000
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hinganghat → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Providing B.T. To Borgaon Chincholi Pardi Saongi Road O.D.R.36 Km 13 / 0 To 15 / 00 , Tah. Hinganghat, Distt. Wardha
BOQ
| Sl. No. | Item Description |
| 1 | Excavation for catch / side water gutter in all sorts of soils to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff asdirected all sorts of soils. |
| 2 | Watering and compacting of embankment formed of materials obtained from the road cutting withinaleadof50m,notlessthan97%ofstandardProctordensityafterlaying them in layers of 20 cm. to 30 cm. with Power roller. |
| 3 | Supplying hard murum/ kankar at the road site, including conveying and stacking complete. |
| 4 | Spreading hard murum/ soft murrum/ gravel or kankar for side width complete |
| 5 | Compactingthehardmurumsidewidthsincludinglayinginlayersoneachsidewith vibratory roller including artificial watering etc. complete. |
| 6 | Providingandconstructing50mm.thick Modified PenetrationMacadam(MPM)road surfaceincluding allmaterials,preparingthe existingroadsurface,spreading 40mm.stone layersmetal30% crusherbrokenmetal+70%Handbrokenmetal(BybreakingRubble obtained by blasting) , heating and spraying the bitumen of specified grade @ 1.75Kilogram/ Square Metre, spreading 12mm.size chips compacting with Static roller having weight 8 to 10 MT. to achive the desired degree of compactionas per TechnicalSpecificationClause 506 etc.complete,includingapplyingtackcoatofbitumen0fspecifiedgradeattherateof 0.30KilogramSquare Metre.(on existing bitumen surface.) |
| 7 | Open Graded Premix Surfacing- Providing and Laying OGC 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates premixed with bituminous binder transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rollingtoachievethedesiredcompactionbutexcludingprime/tackandSealcoat.For Bitumen of specified grade--USING drum mix type hot mix plant with SCADA, Paver and Vibratory roller( over BT Surface) (VG-30 bulk bitumen rates are considered to arrive at rates) |
| 8 | Providing and laying of Type - B premix seal coat withHMP of appropratecrushedstone chipping 6.70 mm size and penetration bitumen of specified grade @ 0.68Kilogram/ Square Metre.,preparing existing roadsurface including mixing insuitable BatchMix plantand rolling bystatic roller having weight 8 to 10 MT. etc. complete. (VG-30 bulk bitumen rates are considered to arrive at rates) |
| 9 | Providingandfixingboarddisplayinginformation,suchas\"Nameofwork,Tendercost, Name of Contractor, Work completion and liability period etc\", having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x75cmincluding,excavation,refilling,transportation,andlabouretccomplete.Spec. Number As directed by Engineer in Charge |
| 10 | Metal /Murumminerals |
| 11 | Quality Control Tests (Rate as per PMGSY Lab) |
| 12 | MPM Metal Aggrigate Water Absorbtion |
| 13 | MPMAggrigate Impact value |
| 14 | MPMAggrigate Crusing value |
| 15 | MPMAggrigate Sieve Analysis |
| 16 | Penetration |
| 17 | 20 MM OGCAggrigate sive Analysis |
| 18 | Penetration |
| 19 | Extraction Test for(OGC) |
| 20 | For Seal Coat Penetration |
| 21 | Hard Murum Liquid Limit & Plastic Limit |
AI Tender Summary
Tender Timeline
Jul 01, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedJul 08, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 10, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender