Relaying Of B . T . Road Surface At Anna Nagar Old L . I . G Colony ( Opp Church ) In Ward No . 33 Relaying Of B . T . Road Surface At Anna Nagar Old L . I . G Colony ( Opp Church ) In Ward No . 33
Tender Value
16.70 Lakhs
Estimated cost
Bid Submission
13 Jul 2021
0 days left
EMD
16700
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
mdu → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Relaying Of B . T . Road Surface At Anna Nagar Old L . I . G Colony ( Opp Church ) In Ward No . 33 Relaying Of B . T . Road Surface At Anna Nagar Old L . I . G Colony ( Opp Church ) In Ward No . 33
BOQ
| Name of Work: Relaying of B.T Road Surface at Anna Nagar OLD L.I.G Colony (Opp Church) in Ward No:33. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1.01 | Preparing the Existing surface to laying the road to proper gradient and remove the loose soil without damage the water supply pipes the rate inclusive of all charges such as earth work and remove the same 2Km away from the site etc, complete as per standard specifications | 81 | m3 | |
| 2 | 2.01 | Providing and laying ,spreading and compacting 0.396 m3 of 45-22.40mm & 0.528 m3 of 22.40-2.36mm & 0.396m3 of 2.36mm and below metal graded stone aggregate to wet mix macadam (WMM ) SPecification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of MORTH specifications. | 29 | m3 | |
| 3 | 3.01 | Providing and laying Prime coat of 7 kgs/10 sqm over the WMM surface treated with primer using 7 kgs of bituminous Emulsion for 10 square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as Prime coat manually etc., complete as per 502 of MORTH Rev V Specifications | 191 | m2 | |
| 4 | 4.01 | Providing and laying tack coat of 2.5 kgs/10 sqm over the WMM surface treated with binder using 2.5 kgs of bituminous Emulsion for (RS) for 10 square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Rev V Specifications | 191 | m2 | |
| 5 | 5.01 | Providing and laying tack coat of 2 kgs/10 sqm over the WMM surface treated with binder using 2.5 kgs of bituminous Emulsion (RS) for 10 square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Rev V Specifications | 1811 | m2 | |
| 6 | 6.01 | Providing and laying 50mm consolidated thick Dense Bituminous Macadam using 0.24cum of 26.50-13.20mm, 0.25 cum of 13.20-2.36mm and 0.23 cum of 2.36mm & below and with 53.20Kgs of VG30/VG40 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing the min. required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to worksite, spreading the mix to uniform thickness of 50mm with paver to the specified grades and cross sections and compacted by Vibratory / Pneumatic Roller to the required density etc., including labour for attending to paver at site etc., including hire charges and fuel charges for 20- 30t CMP with bitumen boiler, tipper trucks, Paver Finisher /9m paver finisher, Vibratory / Pneumatic rollers and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 505 MORTH Rev-5 | 101 | m3 | |
| 7 | 7.01 | Providing and laying bituminous concrete 30/40mm thick using 0.13 cum of 19.00 mm 9.50mm,0.17cum of 9.50-2.36mm and 0.26cum of 2.36 and below with 50.30 kgs of VG30/VG40 bitumen for premixing per 10sq.m including cost and convwyance of ll materials to CMP site heating the bitumen and aggregate to requried Temperature and mixing them in requried in central hot mix plant 20-30 ton capacity ,conveying the mix by tipper trucks to paver ite spreading the mix to uniform thickness of 40mm with meachnical paver to the specified grades and cross sections and consolidated by 8-10 tonne vibratory/Pneumatic roller to the requried density etc.including laour for attending to the paver to the site20-30t CMP with bitumen boiler,tipper trucks,Paver Finisher /9mPaver Finisher,Vibratory/Pneumatic roller and roll Other tools and plant Requried,including fuel and all other incidental charges etc.as per Specfication using CMP as per Clause 507 of MORTH Rev-5 | 61 | m3 | |
| 8 | 8.01 | Raising the existing Circular manholes in heavy type including removing the existing manhole cover with frame by dismantling the exisiting Cement Concrete and tar road surface alround the manhole raising the manhole with Cement concrete 1:2:4 (one cement two sand and four aggregates) 25cm height including centering insid the manhole raising, laying 15cm thick cement concrete 1:2:4 with 20mm granite chips including finishing the top surface of manhole Alround etc. complete | 12 | Nos | |
| 9 | 9.01 | Supply of FRC Manhole 600mm size dia cover with frame including cost of conveyance loading fixing the same etc complete | 4 | Nos | |
| 10 | 10.01 | Road marking with hot applied thermoplastic compound with reflectorising glass beads on bituminous surface providing and laying hot applied thermoplastic compound 2.5mm thick including reflectoring glass beads at 250gms as per sq.m area thickness of 2.5mm exclusive of surface applied glass beads as per IRC 35 the finished surface to be level uniform and free from stresaks and holes (as per MORT & H Specification No :803) | 81 | m2 | |
| 11 | 11.01 | Manufacturing, supply & fixing of Retro-Reflective road name sign board single arrow big size out if wide angle cuble corner micro prismatic grade sheeting confirming to IRC 67:2010&type XI standards of ASTMD 4956-09 specigication and fixed over 2mm thick aluminium sheet back support frame of stainless steel supported by 32NB stainless steel pipe all around and 65NB pipe vertical post firmly fixed to the ground by means of porperty designed foundation with M15 grade cement concrete 30cm x 30cm x 45 cmets complete.The information message shall be made out of cut out lettersin Blue colour transparent overlay film as per , IRC 67 - 201 Guidelines, 7years pre qualification warranty for Retro Reflective sheeting from the original sheeting manufacturer & a cerified copy of three years outdoor exposure reports from an independent test lab for the product offered shall be submitted by the contractor. The sign board shall be retro - Reflective type -XI. The retro - reflective sheeting should have manufactures WATER MARK on the sheeting surface for identification . Single arrow big size 36'' x 18''. | 1 | Nos | |
| 12 | 12.01 | Add : GST 12 % | 1 | GstAmount |
AI Tender Summary
Tender Timeline
Jul 01, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedJul 13, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 14, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender