Repairing Of 10 Kva To 100 Kva Damaged T/F At Sohawal Workshop .
Tender Value
Ref. Documents
Estimated cost
Bid Submission
05 Jul 2021
0 days left
EMD
98000
Bank guarantee accepted
Document Fee
3540
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sohawal → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repairing Of 10 Kva To 100 Kva Damaged T/F At Sohawal Workshop .
BOQ
| Name of Work: FOR REPAIRING OF 10 KVA to 100 KVA DAMAGED T/F AT SOHAWAL WORKSHOP | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Handing and Dragging of Transformer from stacking yard to repairing hall with accessories. | |||
| 2 | 1.1 | 10 KVA | 500 | Nos. | |
| 3 | 1.2 | 16 KVA | 200 | Nos. | |
| 4 | 1.3 | 25 KVA | 2000 | Nos. | |
| 5 | 1.4 | 63 KVA | 500 | Nos. | |
| 6 | 1.5 | 100 KVA | 300 | Nos. | |
| 7 | 2 | Cutting/Opening of top cover plates & fitting of the transformers, draining of its oil & Detanking of core & coil Assembly. | |||
| 8 | 2.1 | 10 KVA | 500 | Nos. | |
| 9 | 2.2 | 16 KVA | 200 | Nos. | |
| 10 | 2.3 | 25 KVA | 2000 | Nos. | |
| 11 | 2.4 | 63 KVA | 500 | Nos. | |
| 12 | 2.5 | 100 KVA | 300 | Nos. | |
| 13 | 3 | Dismantling of core & coil Assembly and cleaning of core and tank (inside) by using warm old oil and hot air making it dirt free/sludge free. | |||
| 14 | 3.1 | 10 KVA | 500 | Nos. | |
| 15 | 3.2 | 16 KVA | 200 | Nos. | |
| 16 | 3.3 | 25 KVA | 2000 | Nos. | |
| 17 | 3.4 | 63 KVA | 500 | Nos. | |
| 18 | 3.5 | 100 KVA | 300 | Nos. | |
| 19 | 4 | Reconditioning/ Making of L.V leg coils from reconditioned strips/new DPC strips, of same size and No. of turns and dimensions as old one. | |||
| 20 | 4.1 | 10 KVA | 2000 | Kgs. | |
| 21 | 4.2 | 16 KVA | 1200 | Kgs. | |
| 22 | 4.3 | 25 KVA | 18000 | Kgs. | |
| 23 | 4.4 | 63 KVA | 9000 | Kgs. | |
| 24 | 4.5 | 100 KVA | 8100 | Kgs. | |
| 25 | 5 | Reconditioning/Making of H.V leg coils from new DPC or SE wire of same size and No. of turns and dimensions as old one. | |||
| 26 | 5.1 | 10 KVA | 4000 | Kgs. | |
| 27 | 5.2 | 16 KVA | 2200 | Kgs. | |
| 28 | 5.3 | 25 KVA | 34000 | Kgs. | |
| 29 | 5.4 | 63 KVA | 16000 | Kgs. | |
| 30 | 5.5 | 100 KVA | 12600 | Kgs. | |
| 31 | 6 | Assembly of core, channel (duly painted by zinc chromatic paint) & coil and fitting of other parts requiring replacements such as press board making supports between adjacent section by insulating spacers & tapping etc. | |||
| 32 | 6.1 | 10 KVA | 500 | Nos. | |
| 33 | 6.2 | 16 KVA | 200 | Nos. | |
| 34 | 6.3 | 25 KVA | 2000 | Nos. | |
| 35 | 6.4 | 63 KVA | 500 | Nos. | |
| 36 | 6.5 | 100 KVA | 300 | Nos. | |
| 37 | 7 | Shifting and keeping the assembled core& coil etc. in OVEN from the repairing area | |||
| 38 | 7.1 | 10 KVA | 500 | Nos. | |
| 39 | 7.2 | 16 KVA | 200 | Nos. | |
| 40 | 7.3 | 25 KVA | 2000 | Nos. | |
| 41 | 7.4 | 63 KVA | 500 | Nos. | |
| 42 | 7.5 | 100 KVA | 300 | Nos. | |
| 43 | 8 | Dragging of transformer tank to washing area and cleaning of rust/dirt etc from outer surface by using caustic soda & water solution. | |||
| 44 | 8.1 | 10 KVA | 500 | Nos. | |
| 45 | 8.2 | 16 KVA | 200 | Nos. | |
| 46 | 8.3 | 25 KVA | 2000 | Nos. | |
| 47 | 8.4 | 63 KVA | 500 | Nos. | |
| 48 | 8.5 | 100 KVA | 300 | Nos. | |
| 49 | 9 | Repairing of damaged T/F body/radiator by electric/gas welding complete in all respect for arresting oil leakage. | |||
| 50 | 9.1 | 10 KVA | 100 | Nos. | |
| 51 | 9.2 | 16 KVA | 40 | Nos. | |
| 52 | 9.3 | 25 KVA | 400 | Nos. | |
| 53 | 9.4 | 63 KVA | 100 | Nos. | |
| 54 | 9.5 | 100 KVA | 60 | Nos. | |
| 55 | 10 | Completely drying & Cleaning of T/F tank (inside and outside) by using hot air/cotton waste/sand paper etc completely and making it ready for painting | |||
| 56 | 10.1 | 10 KVA | 500 | Nos. | |
| 57 | 10.2 | 16 KVA | 200 | Nos. | |
| 58 | 10.3 | 25 KVA | 2000 | Nos. | |
| 59 | 10.4 | 63 KVA | 500 | Nos. | |
| 60 | 10.5 | 100 KVA | 300 | Nos. | |
| 61 | 11 | Painting of inner side of T/F tank with heatproof zinc chromatic paints in two coats after providing primer of red oxide paint. | |||
| 62 | 11.1 | 10 KVA | 500 | Nos. | |
| 63 | 11.2 | 16 KVA | 200 | Nos. | |
| 64 | 11.3 | 25 KVA | 2000 | Nos. | |
| 65 | 11.4 | 63 KVA | 500 | Nos. | |
| 66 | 11.5 | 100 KVA | 300 | Nos. | |
| 67 | 12 | Dragging/shifting out empty tank after painting to assembly area. | |||
| 68 | 12.1 | 10 KVA | 500 | Nos. | |
| 69 | 12.2 | 16 KVA | 200 | Nos. | |
| 70 | 12.3 | 25 KVA | 2000 | Nos. | |
| 71 | 12.4 | 63 KVA | 500 | Nos. | |
| 72 | 12.5 | 100 KVA | 300 | Nos. | |
| 73 | 13 | Taking out core and coils assembly from the OVEN and shifting to repairing area & again tightening the assembly. | |||
| 74 | 13.1 | 10 KVA | 500 | Nos. | |
| 75 | 13.2 | 16 KVA | 200 | Nos. | |
| 76 | 13.3 | 25 KVA | 2000 | Nos. | |
| 77 | 13.4 | 63 KVA | 500 | Nos. | |
| 78 | 13.5 | 100 KVA | 300 | Nos. | |
| 79 | 14 | Welding/fixing the top cover after tanking of core and coil assembly into painted tank and tightening of assembly into the tank and fitting all accessories of transformer and filling of oil. | |||
| 80 | 14.1 | 10 KVA | 500 | Nos. | |
| 81 | 14.2 | 16 KVA | 200 | Nos. | |
| 82 | 14.3 | 25 KVA | 2000 | Nos. | |
| 83 | 14.4 | 63 KVA | 500 | Nos. | |
| 84 | 14.5 | 100 KVA | 300 | Nos. | |
| 85 | 15 | Spray painting of transformer tank from outside with super enamel synthetic Grey paint in two coats after providing primer of red oxide paint | |||
| 86 | 15.1 | 10 KVA | 500 | Nos. | |
| 87 | 15.2 | 16 KVA | 200 | Nos. | |
| 88 | 15.3 | 25 KVA | 2000 | Nos. | |
| 89 | 15.4 | 63 KVA | 500 | Nos. | |
| 90 | 15.5 | 100 KVA | 300 | Nos. | |
| 91 | 16 | Dragging/shifting of repaired T/F near to the test cabin/testing place and dragging /shifting T/F to yard after testing and its stacking at identified place. | |||
| 92 | 16.1 | 10 KVA | 500 | Nos. | |
| 93 | 16.2 | 16 KVA | 200 | Nos. | |
| 94 | 16.3 | 25 KVA | 2000 | Nos. | |
| 95 | 16.4 | 63 KVA | 500 | Nos. | |
| 96 | 16.5 | 100 KVA | 300 | Nos. | |
| 97 | 17 | Punching and welding of M.S. plate of 100x50x3mm size on the outside of T/F containing following information. (I) Unique number, (II) Capacity (III) Name of workshop (IV) Date of repair | |||
| 98 | 17.1 | 10 KVA | 500 | Nos. | |
| 99 | 17.2 | 16 KVA | 200 | Nos. | |
| 100 | 17.3 | 25 KVA | 2000 | Nos. | |
| 101 | 17.4 | 63 KVA | 500 | Nos. | |
| 102 | 17.5 | 100 KVA | 300 | Nos. |
AI Tender Summary
Tender Timeline
Jun 30, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedJul 05, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 06, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender