| 1 | 1 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil, complete all as specified and directed. | | 50 | SQM |
|---|
| 2 | 2 | Excavating in post holes (or similar holes) in soft/loose soil, each n exc. 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm watering, and removing surplus soil to a distance n exc. 50 m and making good surface, complete all as specified and directed. | | 668 | EACH |
|---|
| 3 | 3 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil ,complete all as specified and directed. | | 20 | CUM |
|---|
| 4 | 4 | Returning filling in soft/loose soil, including, spreading levelling watering and well ramming in layers not exc. 25 cm complete all as specified and directed. | | 11 | CUM |
|---|
| 5 | 5 | Removing excavated soils to a distance not exceeding 50 Metres and depositing where directed at a level n. exc. 1.5 M above the starting point complete all asspecified and directed. | | 7.5 | CUM |
|---|
| 6 | 6 | Materials and Labour for plain cement concrete (1:4:8) Type D-2 using 40 mm graded aggregate in foundations, filling and mass concrete complete all as specified and directed. | | 5 | CUM |
|---|
| 7 | 7 | Materials and Labour for plain cement concrete (1:2:4) type B1 using 20 mm graded aggregate in lintels up to 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary from work complete all as specified and directed. | | 2 | CUM |
|---|
| 8 | 8 | Materials and Labour for brick work with Sub Class ‘B’ bricks straight or curved\non plan exceeding 6M mean radius built in cement mortar (1:4), complete all as\nspecified and directed. | | 25 | CUM |
|---|
| 9 | 9 | Materials and Labour for, continuous brick edging with burnt clay bricks of sub class ‘B’ old size bricks; with width equal to the depth of the brick, laid dry, on edge, complete all as specified and directed. | | 704.68 | RM |
|---|
| 10 | 10 | Materials and Labour for rendering 15 mm thick, cement plaster, in cement mortar (1:4) on fair face of brickwork or concrete surface in walls and finishing surface even and smooth without using extra cement, complete all as specified and directed. | | 170 | SQM |
|---|
| 11 | 11 | Material and Labour for preparation of new or previously untreated, brick, stone, concrete, asbestos cement or plaster surfaces over 10cm girth or width, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint), complete all as specified and directed. | | 170 | SQM |
|---|
| 12 | 12 | Materials and Labour for galvanized steel tubing, medium grade, 15 mm bore\nwith all fittings and fixed complete to walls and ceiling or laid in floor, complete all\nas specified and directed. | | 150 | RM |
|---|
| 13 | 13 | Materials and Labour for galvanized steel tubing, medium grade, 20 mm bore\nwith all fittings, laid in trenches, complete all as specified and directed. | | 150 | RM |
|---|
| 14 | 14 | Materials and Labour for galvanized steel tubing, medium grade, 25 mm bore\nwith all fittings, laid in trenches, complete all as specified and directed. | | 100 | RM |
|---|
| 15 | 15 | Supply and Fix, bib tap, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule,15 mm bore and fixed, complete all as specified and directed. | | 10 | EACH |
|---|
| 16 | 16 | Supply and Fix, bib tap, cast copper alloy,with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule,20 mm bore and fixed, complete all as specified and directed. | | 4 | EACH |
|---|
| 17 | 17 | Supply and Fix, gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe, 20 mm bore, complete all as specified and directed. | | 10 | EACH |
|---|
| 18 | 18 | Supply and Fix, gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe, 25 mm bore, complete all as specified and directed. | | 7 | EACH |
|---|
| 19 | 19 | Supply Only, dried cowdung. Notes:- (i) Cowdung shall be free from mud/silts/pebbles or any other kind of impurities. (ii) Stack measurement at site will be considered for payment after deduction of 8.00% (Eight Percent) of volume. | | 105 | CUM |
|---|
| 20 | 20 | Complete weeding of existing area,ploughing upto to a depth of minimum 150 mm from existing ground level, mixing of cowdung with earth, mowing/levelling of surface including supply and planting of doob grass (Cynodon dactylon) to cover the area,complete all as specified and directed. Notes:- (i) Supply of cowdung will be measured and paid seperately. (ii) Ploughed earth shall be declodded before mixing with cowdung. (iii) The area for plantation shall be levelled suitably as directed by Engineer in Charge before plantation. | | 1810 | SQM |
|---|
| 21 | 21 | Complete weeding of existing area,ploughing upto to a depth of minimum 150 mm from existing ground level, mixing of cowdung with earth, mowing/levelling of surface including supply and planting of carpet grass (Axonopus affinis) to cover the area,complete all as specified and directed. Notes:- (i) Supply of cowdung will be measured and paid seperately. (ii) Ploughed earth shall be declodded before mixing with cowdung. (iii) The area for plantation shall be levelled suitably as directed by Engineer in Charge before plantation. | | 1200 | SQM |
|---|
| 22 | 22 | Supply and planting of saplings of Bottle Brush (Elymus hystrix), complete all as specified and directed. | | 100 | EACH |
|---|
| 23 | 23 | Supply and planting of saplings of Christmas Tree (Araucaria columnaris), complete all as specified and directed. | | 100 | EACH |
|---|
| 24 | 24 | Supply and planting of saplings of Debadaru (Cedrus deodara), complete all as specified and directed. | | 100 | EACH |
|---|
| 25 | 25 | Supply and planting of saplings of Ajar (Lagerstroemia speciosa), complete all as specified and directed. | | 68 | EACH |
|---|
| 26 | 26 | Supply and planting of saplings of Kanchan (Bauhinia variegata), complete all as specified and directed. | | 35 | EACH |
|---|
| 27 | 27 | Supply and planting of saplings of Golmohar (Delonix regia), complete all as specified and directed. | | 70 | EACH |
|---|
| 28 | 28 | Supply and planting of saplings of Thuja (Thuja occidentalis), complete all as specified and directed. | | 50 | EACH |
|---|
| 29 | 29 | Supply and planting of saplings of Ixora (Ixora coccinea), complete all as specified and directed. | | 45 | EACH |
|---|
| 30 | 30 | Supply and planting of saplings of Allamanda (Allamanda cathartica), complete all as specified and directed. | | 50 | EACH |
|---|
| 31 | 31 | Supply and planting of saplings of Mussaenda (Mussaenda erythrophylla), complete all as specified and directed. Notes:-(Applicable for Serial Item No. 22 to 31 here in before) (i) Supply of cowdung will be measured and paid seperately. (ii) Excavation in post holes for planting of saplings will be measured and paid seperately. (ii) Earth from excavation in post holes shall be declodded before mixing with cowdung and before returning filling in after planting of saplings. (iii) The height of saplings shall not be less than 450 mm. | | 50 | EACH |
|---|
| 32 | 32 | Material and Labour for tree guard enclosure, 600 mm dia.,1500 mm height, with 03 (Three) Nos. ISA 25 mm x 25 mm x 3 mm legs (Height of legs 2000 mm), 03 (Three) Nos. FI 25 mm x 3 mm rings welded to legs at equidistance above GL, hard drawn steel wire fabric with mesh size 50 mm, dia. of wire each way 3 mm fitted to FI rings upto 1500 mm height of enclosure, legs upto a depth of 450 mm grouted to post holes of size 200 mm (L) x 200 mm (B) x 450 mm (D) duly filled with cement concrete 1:4:8, Type D2 (using 40 mm graded aggregate) including painting of steel surfaces with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer after preparation of surfaces, complete all as specified and directed. | | 205 | EACH JOB |
|---|
